Duda sober number of hosted VMs in BBDD SQL server 2008 y

Similar Questions

• Access the SMB storage using esxi host and manage with MS server 2008

  Hi there, I know the subject line can be confusing, but I didn't know how to explain what I need in the line object in such a short sentence.

  in any case, I have a storage device SMB, a Promise VTrak M610P, which is attached to a blade server 1U HP through interface channels double Ultra 320 SCSI host. I can't configure the VTrak as a NFS, the only way to access logical drives is connected to a server via the scsi channels and using the operating system to share the drive and the shared disks.

  I would use a server blade with dual ultra 320 SCSI host interface channels and connect the VTrak to this server blade. Then I would install ESXI hypervisor OS 5.5 to this server blade. I want to know is if the ESXI operating system will recognize the logical drives and if I create a virtual machine with MS server 2008 and see if the virtual machine detects logical drives, so that I can share the drives? I hope that I'm supposed to and if I'm not, please let me know what makes no sense, I will do the best to explain it better.

  Thank you

  Andy

  So it turns out that there seems to be something wrong with vClient when you add a hard disk (virtual disk) to a virtual machine of size greater than 4 TB. Article VMware KB: value of range error message when you add more than 4 TB capacity discs in vSphere Client describes this if you encounter this problem, add the hard drive via vSphere CLI, CLI power or vmkfstools. So this seems to be a known issue on vClient. What I ended up doing was using vClient, creation of hard disk, adding to the virtual machine (size of the hard drive is to 5.45) and when I would get the error message on the DiskCapControl out of reach, I would just click OK and then finalize the creation of the hard drive on the virtual machine. Once the process is complete, I selected the virtual machine and noticed that he indeed added a new HDD size 5.45 TB even if he's complained about it. I pulled to the top of the virtual machine with windows server 2008 R2 installed and was able to create a new disk under windows and set it up as a shared drive on the network. Looks like vClient must be updated by VMware and correct this bug, if it's a bug that I think. Thank you for the help vervoort!

• Windows Server 2008 R2 on a host of Windows 7 virtual machine

  Using a host Windows 7 Ultimate (64 bit), could I create a virtual machine in Windows Server 2008 R2 as a DC with active directory and join the field of Win 7 host?

  If so, what virtualization software recommend?

  It would be only for development purposes.

  No, you would not be able to join the host (Windows 7) for Windows Server 2008 R2. (Chicken and eggs).

  You can use Oracle VirtualBox or VMWare Player:

  https://www.VirtualBox.org/wiki/downloads

  VMware Player;

  http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

• Duda sober Linked Mode

  Hola.

  Tengo una duda sober Vmware Vcenter linked mode.

  In our infrastructure, tenemos una virtualcenter donde administramos several distintas localidades con sus esx sedes. El caso, hemos wont UN segundo con Vcenter linked mode enable apuntando al el primer vcenter.

  If yo paro el primer vcenter, desde el segundo vcenter, puedo administrar el resto ESX localidades sin hacer estas nada mas? ES decir, podre hacer HA, vmotion, etc... If el primer esta caido, con el segundo vcenter vcenter?

  Lo he probado, paro el Vcenter primario, desde el secúndario pero no puedo ver los esx del primario. Lo he configurado esta Mañana, perhaps tenga para esperarme what's repliquen?

  Gracias of photos.

  Hola

  Lo yo tengo montado para FT del VCenter are:

  VCenter server physical

  Physical server DB

  DR VCenter VirtualBox (instance of vcenter stopped) (another data center)

  DB physical server (another data center)

  Tengo BD Replicación between ambos datacenters are replica Los important config of los ficheros VCenter: asi como deferred that corre donde diarios pasados al DR site of.

  In case of failure:

  Levanto el VCenter en destino

  Registro again los esx existing

  Saludos

  If upon esta u otras answer useful, por favor considered el puntos seleccionando respuesta correcta o util como asignar

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

• Dudas sober config HA.

  Hola,

  Tengo dudas sober the perfect config for HA. I have 2 Dell PowerEdge 2950 servidores y tengo balanceadas las maquinas office between los 2 servidores.

  Hace tiempo tuve con problema HA ago that las Máquinas no is arrancaban in el servidor than estaba 'up '.

  Según Vmware tenia demasiadas Consoles service his on different VLANS (lan, dmz, iscsi, etc..)  por lo that habia algun problema than any industry understand very well.

  Los Vmware anadieron al parameter of a cluster, that give lo creo

  that para solo only United Nations 'service console' in los cual los esx

  comprobaran if el otro Esx esta 'up', 'default gateway' además (if no me equivoco)

  SiGo creyendo than esto no works, porque en 2 repeatedly to our ha caido los uno 2 servidores y las Máquinas no to han levantado.

  Option: 'das.allnetwork0' con value: "Service Console".

  Put dudas son following:

  What checks UN Esx para see as el otro Esx esta 'UP '?

  Cada Vswitch tiene 2 tarjetas y cada tarjeta conectada has a switch (2 swichtes) diferente para tener redundancia.

  entitled checks UN Esx para saber if this 'up' el mismo is the "Default Gataway" direccion y el del otro ESX console service?

  can ser as ambos crean as el otro ha caido he brought levantar las maqunas del esx contrario? How is that happens in this case as is you can avoid?

  how you can realize una prueba para ver if levanta las maquinas? ES say that latiguillo tengo as PMT para perform the tests.

  Por otra parte, to me desactiva config "Virtual Machine start/stop" cada vez as hay una caida. Do not of hay forma dejar los values fixed? ¿porqué is desactiva? Me gustaria dejar el configurado "start y stop of late.

  Not be if tengo muy claro el HA operation y el cambio por Vmware s.

  Gracias por anticipado.

  Hola ansator,

  The best form of chequear what you cluster VMware HA works, are los cables of las fuentes Alimentación tirando of you servidor PE2950. Es a poco heavy pero mejor chequear that works no antes that you tengas a fallo en el PE material y no you work.

  If no you works, chequea el documento best practices of VMware HA in este enlace:

  http://www.VMware.com/VMTN/resources/402

  Saludos,

  Jose Maria Gonzalez,

  Founder and president of JmGVirtualConsulting.com

  -

• OTRA DUDA SOBER STORAGE

  Buenas, tengo otra duda sober storage, are a poco tonta, in an esx 3.5 server are wont, to can add discos fisicos servidor al el esx lo coja sin problemas y?

  Hola

  If walked the controladora en y en the config y puedes crear nuevo RAID con esos discos no hay problema. Lo no podras're create a RAID with 5 con los discos as currently tienees el wont ESX.

  UNA vez configures el going to you of simplemente a RAID 5 storage adapters, adapters of rescaneas y luego en add new storage y formateas in VMFS

  Saludos

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

• (3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  The following error message appears in my events of vCenter server every minute or so:

  "(3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  I have a license of vCenter Server Foundation (4.0) with three hosts. I am aware that this license only supports three hosts. Why vCenter should log an error every minute to tell me that? Can I have it also ignored it clutter visually the events list?

  And to meet me once again, VMware has just contacted me and he was recorded as a bug and will be fixed in update 1 when coming out.

• Anfangerfrage: Von VCenter Anzeigename hosting VMs von und "ID".

  Hallo Wissende,

  ICH als Unwissender habe bei meiner frisch in Betrieb genommenen ESX-Lösung mit 2 hosts und einem virtualisierten Server VCenter (WinSrv 2008 Datacenter) die following questions:

  1 Wie kann ich die Anzeigenamen der beiden mir in der Vcenterubersicht werden hand displaying ESX host? Aktuell steht sleeps nur die IP. Configuration unter-> DNS und routing habe ich already die right Namen samt field drinnen, in shows Übersicht der er aber nur IPs die.

  2 Wird eine "Vorlage" die als ich mir Clone einer fertig installierten VM (OS + all Patches) later problem bei der admission Die Domane machen? Distributor of Mein hat mir said solle alle Maschinen really in VM von Grund auf installieren der ich da sonst die 'ID' der Maschine too equal sei und das in der Domane gabe problem. DAS waren leider 8 Server und dann zu viele updates... ziehende're geht nicht auch mit Vorlagen daughter oder hat der recht distributor?

  ICH danke schon im vorraus und bitte macht mich nicht nieder, ich bin echt neu in der Materie.

  schönen Gruss,

  
  Sven Jackel

  Babelsberger administrator

  Hello Sven!

  Erst once Herzlichst Willkommen in der VMware Welt!

  Deinen zu questions.

  1. you can die Anzeige Namen der nur ESX host in dem change, in dem den host aus dem Entfernst und neu Hinzufugst also vCenter, sharps bad aber über den Namen-DNS. Name da der im vCenter immer der Name ist wie den eingebunden Host As guests.

  2 Jein, dein distributor Hat indirekt recht. Entweder man macht sich immer die trouble und jedes OS von Hand oder man pricing models installed, was meiner opinion nach die angenehmere Art ist.

  See yesterday as eine Übersicht der paths der EIB to Sysprep Windows XP files - Windows Server 2003 (R2) systems.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005593

  EIB systems ab Windows Vista, also Windows Vista, Windows 7, Windows Server 2008 (R2), ist dies nicht mehr works, die Sysprep files sind schon im operating system included.

  Sysprep ist zum Betreibssysteme der squad voran, also name change, ID! Change etc. Kannst models die dann immer aktuell halten und sharp dann mit Hilfe von Anpassungs-specifications zum Deployen use.

  Anbei ein Bild mit den Anpassungs-specifications.

  Falls of the dazu noch questions As, kann ich dir auch eine kleine Anleitung create like / available use create models von und zum stellen.

  Viele Grüße

  Sven

• Number of concurrent connections to remote desktop on Windows Server 2008 and 2012

  Dear,

  Can someone help me with what is the maximum number of concurrent connections on Windows Server 2008 (Standard & Enterprise) and Windows Server 2012 as well.

  Kind regards

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• IIS and sql server 2000/2005 if problems ip address and host name changed

  Windows Server 2003, IIS 6.0 + SQL SERVER 2000/2005

  Is there a problem if ip address and host name of the server is changed?

  for example

  IIS 6.0 may still work properly?

  SQL Server 2000/2005 can still start correctly?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• How to check for number of RPC in SQL Server 2000?

  Please let me know how check the number RPC in sql server 2000.

  Hello

  You should post this question in the TechNet forums.

  Forums TechNet - Windows 7 IT Pro

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• WIndows Server 2008 R2 the number of activations?

  I was wondering how many times he can be reinstalled and that active?
  I got it on the DreamSpark site.

  I hear her 5 times for Win 7 and 10 for the servers, but I don't know if it of true or not.

  2nd question:

  If I miss how should I do?

  I see that you can phone to activate?

  So plug in a microphone and talk to the operator or I do type or what?

  See what I mean (of another Member of the forum):

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Hello Dan_825

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• How to read/write a SQL Server records hosted on the Web?

  If I have a MS SQL Server hosted on the internet, how can I use Labview to access? Popular examples.

  TIA,

  Them

  Well Yes, just provide the connection string and they, query and database tools take care of the rest.

• Can I run Virtual PC Vista Home host and Server 2008 R2 comments?

  I am running Windows Vista family in a workstation with 2 GB of RAM, 1.2 Ghz Intel Core Duo. I would like to run Virtual PC to install Windows Server 2008 R2. What do you think it will work ok?

  Thank you.

  You * can *-really, the question is "Why would you?" because the server would be limited (severely) by bothe, VPC restrictions and those of the home edition. This is a configuration of (very) not supported.

  So not the areas and very limited display features.

  Many of you also on the low side of the RAM in the configuration or vice versa - I recommend at least 3 GB so that you can didicate at least 1 GB at the prompt, and still have room to move around in the host. You can allocate the guest at best - even if WIn7/ServerR2 is less expensive RAM than Vista.

• Cannot get activation for Server 2008 (network attached) phone number, because the error 0x8010002E stops the process.

  I'm trying to get the phone number and the information that I need to activate an installation of Server 2008. The server is my DC and sits on a closed network cannot reach the Internet. The installation was interrupted for more than 60 days, so to request activation. I'm not allowed to modify the current installation (i.e. relocation Server 2008). I have my current PID.

  When I go through the activation process, it fails with the error 0x8010002E. It gives me all the options for offline activation. The error code is for 'Lack of Smart Card Reader'. It's my DC so he shouldn't use a smart card to log on or to make administrative functions due to possible failure with the card reader software.

  How can I do it manually with these questions offline activation?

  I'm trying to get the phone number and the information that I need to activate an installation of Server 2008. The server is my DC and sits on a closed network cannot reach the Internet. The installation was interrupted for more than 60 days, so to request activation. I'm not allowed to modify the current installation (i.e. relocation Server 2008). I have my current PID.

  When I go through the activation process, it fails with the error 0x8010002E. It gives me all the options for offline activation. The error code is for 'Lack of Smart Card Reader'. It's my DC so he shouldn't use a smart card to log on or to make administrative functions due to possible failure with the card reader software.

  How can I do it manually with these questions offline activation?

  Hey bito808

  Here is the vista forums

  Try Server forums

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Walter, the time zone traveller