Duplicate a CTR Global Virtual Channel Max does not update the CO. Pulse.Term setting

Similar Questions

• the channel guide does not match the actual string

  the channel guide does not match the actual string that is to say PBS should be Channel 13 but is listed as channel 2 on the guide

  Hello James,.

  Welcome to the community of Sony.

  What is the model # of the TV?

  You can locate the model # of the TV from this link.

  You can try the steps mentioned on the underside of the base article of knowledge:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C408137

  Please mark it as "acceptable Solution" If you find this information useful.

  Kind regards

  Colby

• MAX does not see the devices and interfaces

  Hello

  Just got a laptop computer to support the lab and installed Labview. For reasons that I don't have understands THAT MAX does not see the com and USB ports in the laptop. The IT Department gacve my rights to admin ID. Any ideas what's happening?

  Kind regards

  Kaspar

  Dennis, as usual, is correct.  Please check if you have installed NI-VISA.  There is an article in the knowledge base on the way in which com ports are not in MAX unless NI-VISA is installed.  The link to this article is below.

  http://digital.NI.com/public.nsf/allkb/1FAB687036A2D85B862571490072307A?OpenDocument

• When I uninstall an application virtualized with ThinApp does not eliminate the root folder, any suggestions to fix this?

  When I uninstall an application virtualized with ThinApp does not eliminate the root folder, any suggestions to fix this?

  Can you try to change the shortcuts = active on all entry Points setting?

  Change of Shortcuts=%Programs%\Check Point\Identity Shortcuts=%Programs%\IdentityAgent Agent

  In this way, we can see if it's the second folder level do. Because when I use only one file, I don't get the issue you reported.

  Out of curiosity:

  It is a Security Check Point Software? What is doing? It works like a ThinApp package?

• the computer does not update the version of Itunes 12.3

  the computer does not update the version of Itunes 12.3

  If your version of Mac OS X 10.6.8 (as shown in your profile information), the latest version of iTunes (12.3.2) requires OS X 10.8.5 or later version.  If an OS X update is required if you run iTunes 12.3.  Your specific model of MacBook Pro determines the supported versions of OS X.

  If you select about this Mac from the Apple menu, click more information, the "model identifier" would help to identify your MacBook Pro model.

• Windows Live Hotmail Inbox does not update the autom automatically, until I have click Refresh. My OS is VISTA and IE9

  Windows Live Hotmail Inbox does not update the autom automatically, until I have click Refresh. My OS is VISTA and IE9.

  How can I solve the problem?

  Hi PaulaCohen,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=1

• Windows 7 Windows Media Player 12 does not update the library when I add an item to the library - please help!

  Windows 7 Windows Media Player 12 does not update the library when I add an item to the library, also, when I delete a file from the folder that contains the media player does not remove it from the library. Can you help me please?

  Hello

  For the question, you can also view the following link for more information:

  You cannot view, add, or delete items in the library of Windows Media Player 11

  The steps are also applicable for Windows Media Player 12.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OnImmediateValueChanged cursor does not update the label text by dragging.

  Consider the following:

  Container {
          layout: DockLayout {}
          Label {
              id: label
              textStyle.base: SystemDefaults.TextStyles.BigText
              verticalAlignment: VerticalAlignment.Center
              horizontalAlignment: HorizontalAlignment.Center
          }
  
          Slider {
              fromValue: 0
              toValue: 59
              value: 0
               onImmediateValueChanged: {
                   label.text = value;
               }
          }
      }
  

  When you drag the cursor, it does not update the text of the label smoothly. How can I achieve this?

  Found the solution!

  By mistake I used the value parameter and not immediateValue in the onImmediateValueChanged function!

• Physical channel selected does not support the type of output required by virtual channel

  I use a box USB-6251.  Inside of MAX, I can set the device to Dev1 / ao1 sine wave generation and if he have output a sine wave.  When I use DAQmx DAQmxCreateAOFuncGenChan function I get error: selected physical channel does not support the type of output required by virtual channel.  The pilot DAQmx does FuncGen on the box USB-6251 or MAX out a set of tensions?

  Hi Paul,.

  Welcome to the Forums EITHER!  The DAQmxCreateAOFuncGenChan is supported only on products Elvis II.  For other devices, including the 6251, you must use the ordinary DAQmxCreateAOVoltageChan and create your own data buffer.  I would recommend looking in the following example:

  Start > all programs > National Instruments > NOR-DAQ > textual Code > ANSI C examples...

  Analog on > generate voltage > Cont Gen Volt Wfm - Int Clk

  In MAX the Sinewave output is used as a test signal - in this case MAX is a period of the wave sine values to write to the buffer and generate these data.  Again, you can produce a sine wave (or any other function) using the AOVoltageChan, but the AOFunctionGenChan is used only with Elvis II.  Just generate data points for the sine wave that will produce DAQ hardware.

  -John

• MAX does not see the cards as DAQmx

  I have three cards OR in my machine: PCI-6602, 6120-PCI and PCI-MIO-16-4 (aka PCI-6040E).  For some reason any my measurement & automation explore (MAX) does not see them I expect.  He sees the card PCI - MIO in the DAQmx and NOR-traditional DAQ records, but he sees that the other two in the traditional NO-DAQ folder.  I should be seeing them all DAQmx AFAIK.  I read in a post on this forum that I can be a corrupted database MAX; so, I renamed and restarted does not.  I have applications that I programmed in Delphi that see, acess and use all three cards using traditional DAQ, so I know they work, at least to some extent.  When I use LabVIEW, he sees only the PCI - MIO map for operations of DAQmx and I'd like to find a way to make all three of them consider DAQmx.  I believe all three cards are compatible with traditional DAQ or DAQmx.  My installed software versions are: LabVIEW 7.0, MAX 4.2.1.3001, NOR-Spy 2.0.0.16, 1.70 OR-488. 2 NOR-DAQmx 7.0.7f0, NOR-PAL 2.0.0 OR-SWITCH 2.00.49156, NI-VISA 3.1, NOR-DAQ 7.4.4f7 traditional (I also tried 6.9.3f4 version without success).

  I hope that it is something with a simple fix.

  Thanks in advance to those who take the time to read and respond to this message.

  Thank you

  Neil

  Did you look in the Readme for DAQmx 7.0? It was the first version and these devices were not yet supported. The latest version of DAQmx you can perform with LabVIEW 7.0 is version 8.1. These cards are listed as being supported.

• 18 Firefox does not update the 2013.2.3.1 norton toolbar. is it possible to do it manually?

  I have the latest versions of Firefox and Norton Internet Security, have restarted several times and no still no toolbar Norton. The Add-ons screen does not list the 2013.2.3.1 version, only the previous version that is disabled. Is there a way to force this update?

  Thank you
  Kilgore

  Hello to kilgore, please refer to https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-18-Support-for-Norton-Toolbar/td-p/886714

• FOR loop does not update the local Variable

  I am newer to labview, and I can't wrap the head around why not a habit of local variable to update in the code if it updates on the dashboard. Anything im missing?

  Assume that you are talking about the local variable of the 'State of the cell. The terminal updates every 500ms in the small top loop, the local variable indicates simply that the indicator and thus updates also.

  The problem is "dataflow" and you need to familiarize yourself with the concept!

  Once the while loop starts, the local variable is reading and inside the loop begins. Most likely, the local variable is read before it is updated in the small loop, so most likely returns the value of a fade on the first iteration of the while loop. Now the small loop continues to go twice per second for about five seconds. Only after the loop FOR (and everything else inside the while loop) completed, the while loop will go to the next iteration, date on which the local variable is read once more, this time with the last value of the last for loop iteration of the previous iteration of the while loop.

  In summary, the local variable updates very well, it's just that the code does not read the new value around most of the time.

  Your VI is full also potential competition conditions caused by the over-use of the local variable. You need to respect the proper execution order by eliminating local variables.

  So what is the solution? Hard to say without knowing what the VI is supposed to do. Most likely, you will need to remove the inside OF the loop and use it outside while loop for everything.

• Welcome screen does not update the recent list

  For a while, starting VBAI 2010, list "Recent Inspections", paragraph "Configuration control" was not being updated forcing me to use the browse option.  I found the list in the Builder.ini Vision and modified, i.e., lightened in a bit, and while my modification is displayed, VBAI does not refresh the list to display the most recent inspection configured when I close the said inspection.  Any ideas on how to "reset" from the home screen?

  Thank you

  Eric

  Well well apparently edition Vision Builder.ni did the trick after all, but only after I rebooted my workstation... to my delight, my home screen is now updated again.

• problem with the ios certificate server does not update the CRL

  Hi all

  The background is that I'm putting a DMVPN solution with tunnels ipsec between the rays created by using certificates.

  I use a cisco 877 as the CA server (its 12.4 (6) T5) running to provide certificates for the spoke routers. This part works very well - rays can apply for a certificate and get a number very well.

  The problem is CA, life of LCR is set to 24 hours, but the CA is not updated the LCR so when the rays see CRL (as defined in their trustpoint) they point to a mistake that the CRL is obsolete and does not connect.

  If making a ' #sh cryptographic pki server ' it lists a ' CRL NextUpdate timer. It has a timestamp that is 24 hours after the last certificate was revocked. The only way I can get the LCR to be rebuilt must revoke a certificate.

  So, my question is, am I missing something here? I thought that it would automatically generations a new CRL list file every 24 hours.

  Can anyone help?

  Thank you.

  Hey Marc (?)

  This seems to correspond to this bug:

  CSCsy95838    AC IOS: LCR of the not updated, update timer not started

  However, it does not mention if 12.4 (6) T5 is affected, only that it was found 12.4 (15) T3 and resolved to 12.4 (15) T10 and other more recent versions.

  I suggest trying the last 12.4 (15) Tx, 15.0 (1) Mx or 15.1 (4) Mx version if you can.

  I assumed that you have much of it, but just in case: as a workaround, you can disable CRL checking on all routers DMVPN, of course they will still allow connections from routers with a revoked RADIUS.

  As (temporary?) substitute for a Revocation list, you can use a 'certificate ACL' with which you can create kind of a 'local CRL Manual:

    crypto pki certificate map certACL 10    serial-number ne    serial-number ne    etc. 

    crypto pki trustpoint myTP

     match certificate certACL
  
      (note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed) 

  Of course, you would have to configure (and maintain!) participating on each router in the DMVPN so it's heavy, but I guess if you revoke often certs, that it might be an option.
  HTH
  Herbert

  --

  If this post answered your question, please click the button of "right answer".

• FDF does not update the Formdata

  Hello

  in php, I wrote a script smal to generate a fdf file but the form does not display the data. I'm sure that the code is correct and the fields are in the pdf file.

        // getdata.php
        $fdf_out='C:\PHPCode\Medi\results\test1.fdf';
        $pdf_doc='http://localhost/test2.pdf';       
        $outfdf = fdf_create();
        fdf_set_value($outfdf, "Textfeld1", 'mein Text', 0);
        fdf_set_value($outfdf, "DatumsUhrzeitfeld1",date('Y-m-d H:i:s'), 0);
        fdf_set_file($outfdf, $pdf_doc);
        fdf_save($outfdf, $fdf_out);
        fdf_close($outfdf);
        Header("Content-type: application/vnd.fdf");
        $fp = fopen($fdf_out, "r");
        fpassthru($fp);
        unlink("test1.fdf");
  

  after pressing the submitbutton (http://localhost/getdata.php#FDF). I see a data tramsmission but no new data.

  Could I have missed something? Option of LiveCycleDesigner?

  I there a way to debug the component PDF to see what is done?

  Thanks a lot, it's upset me for 2 days now...

  Edgar

  Adobe offers the possibility to create the AcroForms using the FDF file, it is almost obsolete. And there are a lot of web applications that provide a copy of a user form completed in a pdf format that reader users can save by using the FDF file to provide the data and the link to the associated PDF form.

  AcroForms provide features that are not available for forms LiveCycle Designer or LiveCycle Designer must use the Acrobat and Acrobat AcroForms JavaScript object to use these features. XML forms cannot be flattened nor can they get the identity object properties.

  The two products are roughly the same age.

  I just consider it an obsolete product just because there is a different approach.