Uninstalling HP F4180 - Op sys = VISTA Home Premium

Similar Questions

• Failed to start error with crcdisk.sys Vista Home Premium

  Hello

  Windows Vista Home Premium boot failure

  Recently, I was not able to start properly under Vista Home Premium 32 bit.  I was directed to repair Startup that does not seem to solve the problem.

  This is the report I received:

  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:196611 problem
  Signature of the problem 05: BadDriver
  Signature of the problem 06: BadDriver
  Signature of the problem 07:0
  Signature of the 08:0 problem
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  I loaded Windows recovery environment from a flash drive and so many startup repair and system restore will not work. all I get is a "Microsoft Corperation" and a green loading bar that loads without result.

  Before this failure, I started to feel a significant increase of the OS, boot time. then after, I ended in failure to start.

  In addition, Startup Repair said that the cause of this problem comes from a driver. If this is the case, how can I fix this with command prompt in Windows re?

  Any help will be greatly appreciated.

  Hi kook.

  Also, please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/87c702d7-f482-4165-9263-464c0f421485

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Serscan.sys missing on Windows Vista Home Premium 64-bit when you try to install Office Jet Pro 8600

  Is there a place to find serscan.sys on a laptop Toshiba Satellite A305, running Windows Vista Home Premium 64 bit?  My Installer to connect wireless to a new HP Officejet Pro 8600 wireless all-in-one printer-scanner-copier-fax machine tells me to find this program, but I can't find it on my hard drive.  I received no installation CD of Windows Vista with this computer when I bought it new.  Any help in finiding or serscan.sys getting and get the printer installed and running is greatly appreciated.

  Hi Excompost,

  Follow the steps outlined in the document below. Let me know what you find?

  Installer Serscan.sys file not found when installing network

• Uninstall sp2 to vista Home premium

  How to uninstall sp2 from vista home premium

  If Service Packs came pre-installed on the operating system, there is no way to uninstall them.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  See you soon.

  Mick Murphy - Microsoft partner

• I uninstalled MSE and installed norton, now I can't access the web. any help? Vista Home premium

  I just uninstalled MSE and installed Norton. Now I can't access the internet. I have vista Home premium. my internet works on all the other PCs in the House. the computer shows I have internet acess, but tells me that I can't Conect on the web. I used restore to an earlier date without change. What can I do?

  Well, I just thought about it. I started in safe mode and uninstalled Norton and safety package provided with Norton from Comcast. It was the solution. I don't know if it was Norton, safety package, or both, but I'm back to MSE and perfect performance. I hope this can help someone else. Thank you

• Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic)

  Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic). After a month of looking for the installation Service, I finally found that a group of 10 files and among them was this executable file
  x86_microsoft-windows-p... installerandprintui_31bf3856ad364e35_6.0.6002.18005_none_d83fb8abf30e1638_printui.exe_bb673fff
  If these are the files I'm looking for, what should I do to get them back to where they should do? Any help would be appreciated...

  System Mechanic is your troublemaker & you have lots of company! [1]

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Install VIsta Home Premium - impossible to uninstall Nero Burning ROM?

  I'm trying to upgrade to Windows XP SP3, Vista Home Premium.  After verification, it tells me that I must remove Nero Burning ROM.  I uninstalled Nero products, used the tool clean and searched all files, nothing done.  I'm not leaning toward a clean install, but hate all the work of having to reinstall all my programs... (yes I know it is better however).   Can anyone help direct me to a way to not have to do a clean install?

  Hi Lorigolden,

  Welcome to the Microsoft Windows Vista forums.

  Download the Nero Web site Nero removal tool
  http://www.Nero.com/enu/tools-utilities.html

  Run the tool to remove the application and then try to upgrade your computer.

  Warning of third party

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know if you have any other questions

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bluetooth - HP Touchsmart IQ772 Vista Home Premium SP1 software license file

  A couple of weeks, I installed Driver Max and update the outdated drivers, blutooth, among them, identified by Driver Max, on my HP Touchsmart IQ772, Vista Home Premium SP1.  Since last week, I get this message every time I have log on or restart my computer. File not found Bluetooth software license. [2]. what this means and how do I stop this happening again?

  Thank you.

  I had the same problem after a registry cleanup on my touchsmart iq518a, don't know why it worked, but I fixed it by clicking programs and features in the control panel and uninstall the program "HP bluetooth." Everything still works perfectly and that the annoying message is no longer happens.

  Hope this helps

  Carpet

  Message edited by Knobby_103 on 04/24/2009 15:03

• Problems of 64-bit Vista Home Premium, Ultimate upgrade

  I recently bought a laptop HP Pavilion dv4-1144us with 64-bit Windows Vista Home Premium (with SP1) pre-installed electronics Fry as well as a copy of the upgrade to Windows Vista Ultimate Edition (with SP1) because I need to the ability to connect to a domain when using the laptop at work.  After installing Office 2007 Standard and by ensuring that the new Windows Vista laptop basically work, I tried to run the installation from the Windows Vista Ultimate 64-bit Upgrade disk and found that, after an hour or two of an upgrade treat it to race end in a non-descript "cannot upgrade one or more components.  Error Windows will restart and cancel the upgrade. ", after which he ends by turn to Vista Home Premium.

  After doing a little research online (on TechArena) and I have re-tried the upgrade again after:

  In Control Panel-> programs and features:

  -Deactivation of Microsoft.NET Framework 3.0

  -Disable remote differential Compression

  -Deactivation of the replication DFS Windows Service

  Disable Norton Virus and Internet Security software pre-installed

  Disable the Windows Firewall and defender.

  Uninstalling Quicktime and AIM.

  Disconnect all other devices to a USB mouse.

  However when "Compatibility Check" of the upgrade at the beginning, he warn a problem with a filter 'keyboard '.

  (no further details) which I think can refer to the HP software that implement quick launch the laptop keys.

  So I downloaded and installed the latest version of the HP Quick Launch Button drivers on the HP Support page:

  ' HP Quick Launch buttons Date: 08/2008 Version: 6.40.8.2 H size: 20.97 M

  and I tried again, but still without success.

  Note: I can not run the Windows Vista Upgrade Advisor, as recommended because it does not work on Vista 64 bit.

  However, there are standard HP and Microsoft Vista + Office + MessengerLive software installed only at this stage.

  Are there additional clues on what to try next?  Has anyone experience this problem?

  -Greg

  You can try to uninstall the filter on the keyboard until the upgrade is complete...  In Device Manager, go to 'View' and select 'show hidden devices and then go down to "Non-Plug and Play drivers" and made a right click on the keyboard/HID filter drivers and uninstall (remove also the softare upon request).

• System recovery fails on the new HARD drive (HP - DVD, Vista Home Premium 64 - bit, DV4-1225dx)

  I have a Pavilion DV4-1225dx who had a hard drive failure. VISTA Home Premium 64-bit.

  Went to buy the oem HDD @ Tiger Direct (0A 56415 Hitachi Travelstar 5 K 320 Mobile Hard drive - 2.5 ", 5400 RPM, SATA 3 G, 250GB, 8MB Cache) but it was out of stock. I bought the proposed replacement (WD Blue 320 Mobile Hard Drive - designed for the calculation of daily - 2.5 "SATA 3 Gb/s, 5400 RPM, 8 MB c...)

  The HP system recovery DVDs work for more than 12 hours and fails. CTOERROR.flg

  ChkErrBB.CMD: Detect an error in the PININST_BBV

  ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log

  In addition to a video driver not install, I found:

  C:windows\system32\Drivers\enecir.sys not found

  Recovering the system formats the HARD disk properly. After that the failure of the HARD drive recovery shows that:

  C: 38.8 GB free of 58.0 GB

  E: 2.02 GB free of 12.9 GB

  15 f009wm 8.1 WIN 64 bit
  Office Jet 2540
  P2-1113w WIN 7 64 bit
  G71-340US WIN 7 64 bit
  dv4-1225dx VIsta 64-bit
  zd7000 WIN XP Pro
  xv886 Millennium WIN / WIN XP Pro
  HP deskjet 6980xi
  HP pavilion xt236 / ze4200 WIN XP Media Edition

  found an another Hitachi 0A 56415 and was able to install with recovery disks. Have used the new and more great as a backup USB drive with in a disk caddy.

• Impossible to go from Vista Home Premium service pack 2 to Ultimate service pack 1 Option is disabled

  Hello

  I am running Vista Home Premium with service pack 2.  My upgrade is holiday with service pack 1.  What should I do to upgrade. I do not of course want to do a clean install.  Thank you

  Read this about uninstalling SP2:

  If Service Packs came pre-installed on the operating system, there is no way to uninstall them.
  You will need to swap the disk to upgrade to a later version that includes the missing Service Pack.

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have installed.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  And 32-bit to 64-bit and 64-bit to 32-bit is a clean install, not an upgrade, if you have different versions of ILO.

  See you soon.

  Mick Murphy - Microsoft partner

• Don't have a Media Center on my HP Vista Home Premium update.

  I have a HP certified authentic running Vista Home Premium SP2.  It came with Media Center, which I barely used until recently, but now I really enjoy it.

  I've heard of the Netflix tile added last year, but I don't see in my Media Center.  I finally got to see what it looks like at a store (it was on a Win7 machine) and now I can't wait to get this working on my computer.  Miss me him more than the Netflix tile... As well, Miss me Internet TV.  Could I have missed that any update?  I activated Windows Update and install updates regularly.  How can I tell what version of Media Center I am running?  Is anyway to uninstall/reinstall Media Center?

  I have a topic "TV + movies", but under that, it's just "recorded tv", "DVD library" and "set up tv.  I don't have a TV tuner card.

  Thank you.

  Hi amal.

  I'm in the USA.  My version of Media Center is 6.0.6002.18103 (vistasp2_gdr.090831 - 0117).

  I downloaded the Media Center TV pack you mentioned, however, when I tried to install it, the installation program said, "the update does not apply to your system."

  I searched the list of Windows updates installed on my system for the TV pack, but do not see it.  The most recent WMC cumulative update on my system was KB974306.  I uninstalled, rebooted, then tried to reinstall the TV pack, but got the same message "does not apply".

  So I re-installed KB974306 (who alerted the automatic update of Windows Me was available after reboot), and read the next article you sent.  Someone suggested to do a 'Download Now' to in WMC.  I tried and then Netflix tile appeared, as well as sports and Internet TV.  My WMC version remained the same even after a reboot.

  Since I now have the Netflix tile and it works, I really must the WMC version 6.1 +?   If I wait until the next auto WMC updated for Vista, I should be able to do things?

  Thank you very much for your help!
  Jay

• Should I reinstall Vista Home Premium?

  My problem started when I downloaded a few new files for a game, I run on my Vista Home Premium.  The game is Left 4 Dead 2, I've been looking for a good map editor for game cards included with the game, and in my research on the web, I found a few new cards that are in zip (compressed) format, and after reading the instructions I have to use my 'open with... " command through Vista and the value of Left 4 Dead 2 as well as the program to open these files with..., now on my system, I have a lot of space (500 GB HDD with about 75% of free space), I have a quad-processor, 2.40 GHz Pentium 4, 4 GB of RAM.  Now for the problem; When I select Left 4 Dead 2 as the program to use in the "Open with...» " window and click OK, nothing happens, Left 4 Dead 2 does not appear in the"Open with... " list of programs and it happens with all types of file/program type on my system.  So I ask, can I reinstall Vista once more?  It has been replaced once before, and honestly, I didn't like the process of resettlement.

  Resettlement took my old Windows subfolder and placed in another directory on the operating system reinstalled.  I can see why he does it, but honestly, it's a royal pain in the neck to find out what to do with the new directory, I ended up just removing all together.  So I ask you, should I reinstall or not to solve this problem with 'open with... '. »?

  Hello

  Thank you for using Microsoft answers.

  It is not necessary to reinstall your operating system to Vista.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Try the instructions below that may help you resolve the issue.

  Method 1:

  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. In the System Restore dialog box, click Next.
  4. In the list of restore points, click a restore point created at least a week before the current date, and then click Next.

     Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.

  5. Click Finish.
  6. The computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  Method 2:

  Follow the instructions below that may help you.

  1. right click on the file.

  2. select open with

  3. click on choose program.

  4. Select the game.

  Check whether the problem is resolved.

  Method 3:

  Try to uninstall and reinstall the game and see if the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• An upgrade on the spot with a Vista Home Premium SP1 won't work...

  My Vista Home Premium has some problems such as the audio service starts do not. Microsoft sent me a Vista DVD but it is SP1 and I installed SP2. It will work yet? I want to perform and the upgrade on the spot, but it does not give me the option to upgrade... just do a custom upgrade which is really just a new facility.

  Any help is greatly appreciated!

  Ryan Ryan Kaskel Internet Consulting http://www.ryankaskel.com/ http://consulting.ryankaskel.com/ RyanKaskel.com

  You will need to uninstall SP2.

  The SP installed cannot be higher than the SP on the DVD; Otherwise, the operating system installed is newer than what's on DVD, and upgrade is not available...

  http://support.Microsoft.com/default.aspx/KB/948537

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Above the tutorial shows you how to do a repair installation.

  See you soon. Mick Murphy - Microsoft partner

• Windows Vista Home Premium update froze during the 'configuration' June 30, 2009.

  Received notification of five updates to install on my computer Windows Vista Home Premium, one of them being Internet Explorer 8.   All the downloaded slowly.   Each of them appeared to install, but slowly and I left the computer while he was installing the 3rd update.   When I came back it had evolved in the 'Configuration' screen (always see after there are updates and it restarts) and sat there for hours.   It reads "Configuring updates: stage 3 of 3, 0% complete.  The percentage of nevers turns off 0%.   I finally turned off the computer and when she started he said windows had not closed properly so I chose the Safe Mode option.   He immediately went the same configuration screen.  I left it again for 4 hours, but no change.   What should I do?

  The laptop is a HP tablet PC.

  Here's how to uninstall the ones you don't want.

  And how to change the settings of update and IE8 HIDE update!

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner