Duplicate host names found in the node information table
Hi all
I'm installing RAC Oracle 11 GR 2 Windows. I have prepared two nodes and modified the etc/hosts.
After that when I run the installation of the grid while giving details of the node after the installation of tpical menu I get the below error.
Please help me to solve this error.
Thanks in advance.
Hi all
The error is cleared. The mistake I made was like a secondary IP in the network card settings, I added the VIP.
I tried removing the same and just give the details of the intellectual property in the etc/hosts file. The installation is successful.
Thank you for your valuable answers.
Tags: Database
Similar Questions
-
Former (incorrect) host names remain in the DNS system on the new unique domain
Hello.
Months ago, we have merged a few areas in a new and unique area. We have three domain controllers (Windows 2008 R2) and all work DNS. DNS is integrated with Active Directory.
I was just poking around today and noticed that the old host of an old domain DNS names. I deleted the folders, but they just come back. These computers were recreated, to my knowledge, there should not be any residual information from the old domain on computers.
I run nslookup and checked for the old servers DNS, but the only one of the name servers that are found are the three new DC, as expected. I also connected on each domain controller and delete records on each, thinking that maybe the records have been replicated throughout the domain.
I don't have any idea how these folders are created. Can anyone offer insight? It drives me crazy!
Thank you very much.
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
User names found using the command run "control userpasswords2" do not match my user accounts
Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
When I look in Control Panel I see 4 users, A, C, D and comments.
When I go to C\:Users I see B, C, D and comments.
I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
All of these accounts should not match in computer #4?On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.
I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.
Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this? Gift of TIA
Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
When I look in Control Panel I see 4 users, A, C, D and comments.
When I go to C\:Users I see B, C, D and comments.
I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
All of these accounts should not match in computer #4?On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.
I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.
Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this? Gift of TIA
I finally thought to it. They wore all the user names that came when I ran the command "control userpasswords2". As I said in my original post, user names in all the names of the Panel user control over all matching computers. The only conflict I've had was in the list of user names in the list found when I ran "control userpasswords2". I went to highlight the 'B' account after that I ran the command, you click Properties and changed his name to 'A'. This solved my access denied problem once and for all. Apparently he does not have all of the accounts in the control panel.
Don
-
Redirect TNS on 2 node RAC returns host name, should be the FQDN
Hello
our 2-node RAC (11 GR 1 matter, Linux x 64) listeners return only a host without a domain name name when TNS redirects sending (when you load balancing server-side). Is it possible to configure them to send complete domain names? Listener.ora files are configured with full domain names on both nodes.
I really want the FQDNs, because clients must connect from multiple DNS domains.Oracle takes the name of vip of the local_listener parameter set to the database.
So make sure your whole DB instance local_listener parameter the name of domain name vip.local_listener=LISTENER_DB1 --- on tnsnames.ora file, it lists as follows: LISTENER_DB1= (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = node1-vip.domain_name)(PORT = 1521)) )
-
Then the specified mail server host name differs from the certificate CN
My BIEE installation is 11.1.1.7 and SMTP server configured in EM. I put the root CA for SSL certificate file.
He calls the error message "then hostname specified mail server differs from the certificate CN", when agent is running.
The SMTP certificate common name is "pop.mydomain.com", and the hostname of the SMTP protocol is "SMTP.mondomaine.com". If the names are different, it works fine with Outlook and other email clients.
All the solutions to fix it?
You are right. For the security certificate should be identical to the host. But the smtp server is not placed under the responsibility of us. I modified the file hosts as a workaround. I can't find any biee configuration option to ignore the incompatibility.
-
Assign host names to deployed VM based on the assigned IP address DNS record
Hello
I'm trying to set up Lab Manager in a lab environment. The laboratory uses static IP, so I set up static IP pools that will assign an IP address to a deployed virtual computer. However, Lab Manager requires that you provide the hostname before you deploy (the default is ConfigXXVMY, XX and there is a number (ex.) Config30VM0). We already have DNS records to our IP addresses, and we need the hostname to match with the IP address.
For example, the IP 192.168.1.5 has a labpc5.ourlab.company.com DNS record, and the host name should be labpc5.
When I deploy a model, Sysprep runs and it will change all network information, but it changes the hostname of this ConfigXXVMY, not the host name that resolves the IP address is assigned. I need to know how to fix this, or if there is a kind of way to make that change to pre or post sysprep.
Note: I tested this especially with Windows Server 2003 and 2008 - I intend to eventually include Linux OS and this issue also apply here.
If someone has an entry that could help me solve this problem, I would really appreciate it.
Thank you.
Yes, if the network works immediately after sysprep and before you reboot... then just write a post customization.
Pre and post customization are command line arguments.
i.e.
PREandPOSTscript.bat postcustomization
There, you'll need something like this:
off @echo
If "% 1" == "precustomization")
tasks precustomization echo
) ElseIf '%1% ' == 'postcustomization')
tasks postcustomization echo
) (other)
unknown command line Echo
)
The syntax is another post here: http://communities.vmware.com/thread/167069
Kind regards
Jonathan
B.SC., RHCT, VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
Remote touch the codec using the host name - matching cache of IPv4
Pairing for some of the features of my remote client contact is often lost/broken. It uses the DHCP protocol for codecs and uses dynamic DNS entries as 'host name' at the time of the twinning contact to the codec devices.
While this works for pairing at first, it seems the cache keys resolved IPv4 address of the codec instead of the host name. Whenever the IP address of the codec changes, the pairing is lost.
Am I wrong? I came to the conclusion that codecs must be treated using static IPs or DHCP reservations for Peel remote to work reliably
Click Select codec manually..., enter the IP address or host name of the codec and tap Start matching.THX
/ DavidAppears this is a limitation of the Touch and/or codec, see bug CSCua05282. The contact must use the IP address, which is why when you entered the hostname of the endpoint it solved its IP address and used it.
-
NETCA use configure my IP to the listener instead of my host name
Hi I use NETCA to configure my interlocutor.
But NETCA always configure my IP instead of my host name.
I would love to see that my host name is in the Configuring the listener automatically (by NETCA)
So I've got something I can change in my answer file to force this config?
Below you will find my response file
###################################################################### ## Copyright(c) 1998, 2012 Oracle Corporation. All rights reserved. ## ## ## ## Specify values for the variables listed below to customize your ## ## installation. ## ## ## ## Each variable is associated with a comment. The comment ## ## identifies the variable type. ## ## ## ## Please specify the values in the following format: ## ## ## ## Type Example ## ## String "Sample Value" ## ## Boolean True or False ## ## Number 1000 ## ## StringList {"String value 1","String Value 2"} ## ## ## ###################################################################### ## ## ## This sample response file causes the Oracle Net Configuration ## ## Assistant (NetCA) to complete an Oracle Net configuration during ## ## a custom install of the Oracle12c server which is similar to ## ## what would be created by the NetCA during typical Oracle12c ## ## install. It also documents all of the NetCA response file ## ## variables so you can create your own response file to configure ## ## Oracle Net during an install the way you wish. ## ## ## ###################################################################### [GENERAL] RESPONSEFILE_VERSION="12.1" CREATE_TYPE="CUSTOM" #------------------------------------------------------------------------------- # Name : SHOW_GUI # Datatype : Boolean # Description: This variable controls appearance/suppression of the NetCA GUI, # Pre-req : N/A # Default : TRUE # Note: # This must be set to false in order to run NetCA in silent mode. # This is a substitute of "/silent" flag in the NetCA command line. # The command line flag has precedence over the one in this response file. # This feature is present since 10.1.0.3. #------------------------------------------------------------------------------- #SHOW_GUI=false #------------------------------------------------------------------------------- # Name : LOG_FILE # Datatype : String # Description: If present, NetCA will log output to this file in addition to the # standard out. # Pre-req : N/A # Default : NONE # Note: # This is a substitute of "/log" in the NetCA command line. # The command line argument has precedence over the one in this response file. # This feature is present since 10.1.0.3. #------------------------------------------------------------------------------- #LOG_FILE=""/oracle12cHome/network/tools/log/netca.log"" [oracle.net.ca] #INSTALLED_COMPONENTS;StringList;list of installed components # The possible values for installed components are: # "net8","server","client","aso", "cman", "javavm" INSTALLED_COMPONENTS={"server","net8","javavm"} #INSTALL_TYPE;String;type of install # The possible values for install type are: # "typical","minimal" or "custom" INSTALL_TYPE=""typical"" #LISTENER_NUMBER;Number;Number of Listeners # A typical install sets one listener LISTENER_NUMBER=1 #LISTENER_NAMES;StringList;list of listener names # The values for listener are: # "LISTENER","LISTENER1","LISTENER2","LISTENER3", ... # A typical install sets only "LISTENER" LISTENER_NAMES={"LISTENER"} #LISTENER_PROTOCOLS;StringList;list of listener addresses (protocols and parameters separated by semicolons) # The possible values for listener protocols are: # "TCP;1521","TCPS;2484","NMP;ORAPIPE","IPC;IPCKEY","VI;1521" # A typical install sets only "TCP;1521" LISTENER_PROTOCOLS={"TCP;1521"} #LISTENER_START;String;name of the listener to start, in double quotes LISTENER_START=""LISTENER"" #NAMING_METHODS;StringList;list of naming methods # The possible values for naming methods are: # LDAP, TNSNAMES, ONAMES, HOSTNAME, NOVELL, NIS, DCE # A typical install sets only: "TNSNAMES","ONAMES","HOSTNAMES" # or "LDAP","TNSNAMES","ONAMES","HOSTNAMES" for LDAP NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"} #NOVELL_NAMECONTEXT;String;Novell Directory Service name context, in double quotes # A typical install does not use this variable. #NOVELL_NAMECONTEXT = ""NAMCONTEXT"" #SUN_METAMAP;String; SUN meta map, in double quotes # A typical install does not use this variable. #SUN_METAMAP = ""MAP"" #DCE_CELLNAME;String;DCE cell name, in double quotes # A typical install does not use this variable. #DCE_CELLNAME = ""CELL"" #NSN_NUMBER;Number;Number of NetService Names # A typical install sets one net service name NSN_NUMBER=1 #NSN_NAMES;StringList;list of Net Service names # A typical install sets net service name to "EXTPROC_CONNECTION_DATA" NSN_NAMES={"EXTPROC_CONNECTION_DATA"} #NSN_SERVICE;StringList;Oracle12c database's service name # A typical install sets Oracle12c database's service name to "PLSExtProc" NSN_SERVICE={"PLSExtProc"} #NSN_PROTOCOLS;StringList;list of coma separated strings of Net Service Name protocol parameters # The possible values for net service name protocol parameters are: # "TCP;HOSTNAME;1521","TCPS;HOSTNAME;2484","NMP;COMPUTERNAME;ORAPIPE","VI;HOSTNAME;1521","IPC;IPCKEY" # A typical install sets parameters to "IPC;EXTPROC" NSN_PROTOCOLS={"TCP;HOSTNAME;1521"} #SERVICEUSERPASSWORD;String;Windows service user password # If the oracle home is installed as secure user, supply the password SERVICEUSERPASSWORD=""oracle""
Listener will start & run when there is no file listener.ora.
It is NOT necessary to run the netca; Just so ignore it.
-
I have a lot of VSphere 4.1, ESXi 4.1 that I need to change the host name. Then I go in VSphere, highlight the host, set mode now, goto, DNS and routing configuration, the new host name change and restart, get fashion maint and host on the console of the host name ESXi said the NEW host name in DNS and routing it says the NEW name of host, but on the left hosts & Clusters discovered I still see the OLD host name... I try to add the new host name and it is said that there are already. Is there something I missed >? >
John
the name to remember in the DB vcenter. one of the ways is to remove and add the vCenter.
-
Hello. I had chosen not to send the host name real return to the dashboard so that all as anonymous servers. When it's time to make the reports how the dashboard indicate the actual host names. If the question is never download this information, how to prepare a report for the customer with host names that they recognize - rather than a bunch of anonymous servers?
Thank you
That's the problem with sending information identification does not: you can not identify the systems! The scenarios will give you a number of necessary guests. Investment is not really a problem if they use the DRS still. It can become a hindrence try to identify exceptions. You can always run the planner of the PAC reports.
Dave
-
duplicate key was found for object
Hello
in tools 8.49 (HRMS90) MSSQL 2005, linking Data Mover, I got the following error:
Any solution?Import PORTAL_CSS_RUN 11 Building required indexes for PORTAL_CSS_RUN - SQL Error. Error Position: 0 Return: 8601 - [Microsoft][SQL Native Client][SQL Server]The CREATE UNIQUE INDEX statement terminated because a duplicate key was found for the object name 'dbo.PS_PORTAL_CSS_RUN' and the index name 'PS_PORTAL_CSS_RUN'. The duplicate key value is (PSEM, permsync). [Mic CREATE UNIQUE CLUSTERED INDEX PS_PORTAL_CSS_RUN ON PS_PORTAL_CSS_RUN (OPRID, RUN_CNTL_ID) Error: Unable to process create statement for PORTAL_CSS_RUN SQL Spaces: 0 Tables: 5743 Triggers: 0 Indexes: 6841 Views: 0
Thank you.I guess that the process resembles a process of app-engine.
last run should lead to the error. next time, when you try to run, you must add the work and erase the lines of the previous job. App engines should never go to error. they cause blocking on the tables of data problems.
This is what error u see the log file. unlock the rows in this respective table, and then try again. u must succeed.
Thnks! -
VPN host name address in config
I am trying to create my vpn tunnel to use ip instead of host names, so in the case where change us the ip addresses I don't need to change a load of routers.
However when I get my orders as below, the host name resolves automatically and when I do a show that is executed, it displays the ip address again. How do config record with host names?
edited config, some commands used:
crypto ISAKMP peer hostname
&
defined by peers
You can not use FQDN counterpart hostnames with a VPN IPsec LAN - LAN that uses keys pré-partagées for authentication.
To do this, you will need to deploy certificate based authentication.
-
ORA-01403: no data found on the LOGICAL standby database
Hello
Logical question of Eve:
Enterprise Edition Oracle 10.2.0.2.
M work waiting LOGIC for 1 year but still i have not had this...
I m not be countinuously no data foud errror on the logic of the standby database.
I found the table causing the problem (db_logstdby_events) and jumped this table and table instantiated using the package bwlow:
exec dbms_logstdby.instantiate_table (...)
but when I start to apply the logical waiting process it gives again some were found for the new data table:
I even tried to instantiate the table to EXPORT/IMPORT assistance over time, but the same problem same deal with.
As much as I knew abt the error that is:
Table1:
ID
10
20
30
Now if sql apply processes on standby logic tent performs the operation of (for example) updated as below
Update table1 set id = 100 where id = 50;
above request will not be completed cos he'll never find 50 values which is not in the table. That is why this error coming...
Now my concern is... no user didn't dare change/make of such changes on the logic ensures. So if there is no change in the tables, then apply it sqll should get all the values to be needded for an update...
watingggg guyssss...Hello;
How do you know that the database pending is compatible with the primary?
Are there opportunities has one or several tables have been created on the eve before they were created on the primary? (If Yes check in DBMS_LOGSTDBY. INSTANTIATE_TABLE)
Or jump and re-instantiate the table.
Example of
EXEC DBMS_LOGSTDBY.SKIP('DML','EMPLOYEES','%'); EXECUTE DBMS_LOGSTDBY.INSTANTIATE_TABLE ('YOUR_USER', 'EMPLOYEES', 'YOUR_DBLINK');
Best regards
mseberg
-
Problem of Listener after changing the host name &; ip address of a node
Environment - Oracle 11g R2 is installed in the OEL 5 (node Oracle VirtualBox). Voluntarily, I changed the IP address and the host name of the node for use as a node pending. What are the changes that are needed to make in listener.ora and tnsnames.ora file?
Thanks in advance.
Kind regards
Sandy
Published by: 918868 on October 26, 2012 20:21issue following commands OS below
lsnrctl stop
CD /home/oracle/app/oracle/product/11.2.0/dbhome_2/network/admin/
MV listener.ora listener.ora.sav
lsnrctl start
lsnrctl status
# now wait 65 seconds before continuing as below
lsnrctl serviceCOPY orders & results from above, then PASTE it back here
-
Restore the virtual hard drive backup on a different node with different IP and host name.
Hi guys,.
I want to do the following.
My reliable backup strategy is the virtual hard drive backup. The database is installed on a virtual particulay machine (node). Now, I do not take the backup of the DBF files or control files or files from archive.
I rely on the virtual hard disk backup. It takes the entire Virtual Machine backup. Now, I wanted to restore this virtual hard drive backup to a different node with different IP and host name.
But before I start the database, there are some things I need to do.
As change address IP address and the hostname registered with the database installed and its services.
Please guide me through the steps on how to perform the activity.
Concerning
Lam...
SOA admin.I think that the whole operating system will be restored in a new virtual machine... I have it... The changes will have to be done in the file listener.ora (hostname or IPADDRESS and also PORT NO in case you want another port as the existing one). Once you have made the changes that you have to bounce the listener, I mean stop and start the listener... I don't think that any other changes are needed... Make sure that the same need for entries (from the listener) to be included in the TNSNAMES file. ORA file both client-side... The tns service is used to connect to the remote database server (from the demand side or whatever source you used to connect to the database server)... I just think that the change to do... Hope its clear... Please try...
HTH
Kind regardsIMRAN KHAN
Maybe you are looking for
-
I have a MacBook 2008 end Pro 15 '' running OS S version 10.8.5. I run a large number of features of Movavi and Aimersoft video programming on top of this OS. Often, my 'other' storage is high, for example 65 GB. Time impact of programs heavily Ke
-
How to save and pass the variable to the BindingInfo resources xWebSite DSC setting.
Let's say I want to share data and configuration and I would love to sites linking information in the DSCConfigurationdata file, separately from DSC configuration like this: xWebsite xWebsite1{Name = "site.name.com".ApplicationPool = "site.name.com."
-
BlackBerry smartphones unable to watch videos from Youtube on their Site
I can't watch videos on youtube... No. When I got the phone I was able to watch more, but with all the formats out there I know this. Now I can't watch everything! All I get is "format not supported" or "playback error" messages. I have the 8330 with
-
Hey, I'm new to this forum, and I could use the help of specialists. I use DTM 5.01.41 for Vodafone NL (until July 2010) which should support the outlook synchronization. The Intellysinc software (incorporated in DTM) displays a message that there is
-
November 16 mozilla set updated to 50.0. When I run a whole computer scan avg gave me the following notification: Threat: The file is signed with a digital signature that is broken, published by: AVG technologies Name of the object: c:/users/user/app