duration of the animation

Similar Questions

• How to control the duration of the animation of text?

  I found a question similar to this in a forum for another product, but the answering machine only knew the answer and simply recommended "autour experimentation until you understand", which perhaps is the useless answer never.  Laughing out loud.

  My question is: How can I do so a text animation brings the text and then allows the text to sit on the screen normally for awhile after that?  Currently, when I add a text animation, it insists on the extension of the duration of the clip as a whole, from beginning to end.  How can I limit the animation to, say, the first 2 seconds of text and then allow the text to sit normally for 8 seconds after that?

  You will need to create your own animation custom rather than using one of the presets.

  It's pretty simple, using animation keyframes for the motion effect. Just right click on the title on the timeline, select view properties, open the scenario of creating keyframes in the properties panel, and you can create an animation, you can dream!

  I explain how to do, step by step, in my books.

  http://Muvipix.com/PE9.php

  But you can get the basics of my free article "Keyfaming base" on the first Elements Muvipix.com support site.

  http://muvipix.com/products.php?searchphrase=basic+Keyframing&btn.x=0&btn.y=0

• How to set the duration of the animations of text?

  Scenario: as part of my learning pre 9, that tried to create what is essentially a slide with some projectile points. It's three lines of text in title I want to scroll the screen one after the other and then sit for about five seconds before the title shot has been completed.

  However, it seems that you cannot process the lines of text as individual objects (assuming that each line is an individual text box) as you would with KeyNote or Powerpoint.

  It seems there are three approaches to the use of the manipulation of text for titles:

  1. Animation with the menu/conduct
  2. Animation with effects
  3. Animate the whole title clip (is that the right term?) by using keyframes and motion and opacity

  It seems that none of these allow you to sequence the three lines of text so that they appear one after the other with specified times unless you create three separate title clips that appear one after the other. What at first would be on the first line, in the second element of title do you the first static line and roll on the second line and then in the third clip that you would roll on the third line while lines one and two were static. Then, to get a static display, you would create a fourth title clip in which all lines were static.

  My understanding is correct?

  I looked through the documentation and see no way to set the sequence and times of the different lines of text.

  Thank you.

  You're right – one cannot do multiple lines of text in a title and then apply predefined animations.

  In the Meadow, I would create the title in Photoshop, or PhotoshopElements, where each line is a layer, and the background is Transparent. Then save each layer as a separate PSD Import in the meadow. Then just animate each PSD individually, with keyframes for fixed effects > Motion > position and possibly movement > scale. With key frames, you can pause, speed up and completely control the animation.

  The reason for this in PS/EPS, is therefore very easy to align the text to the other layers.

  This can be done in the Titler, but I suggest using grids, alignment, or similar, to keep things lined up. This ARTICLE will give you some tips and even grids of alignment.

  The title preset animations are very limited, and I rarely even think about using them.

  Good luck

  Hunt

• Change the speed of the animation using the code

  • Created an animation for a rectangle that will either upwards or downwards.
  • Is it possible to change the speed of the rectangle only when he goes to the top using the code?
  • Here is the code for the button:

  If (sym.getComposition () .getStage (.getSymbol("rect").upDown) == 0) {}

  sym.getComposition () .getStage ().getSymbol("rect").upDown = 1;

  sym.getComposition () .getStage ().getSymbol("rect").playReverse ();

  }

  else {}

  sym.getComposition () .getStage ().getSymbol("rect").upDown = 0;

  sym.getComposition () .getStage ().getSymbol("rect").play ();

  }

  Thank you

  Eddie

  Hey, Eddie.

  There is no way to dynamically change the speed of an animation, such as defined in a calendar.  You can code by hand animation or simply change the duration of the animation in the timeline.

  Hope that helps,

  -Elaine

• the animation code runs only once

  Hi all

  import bb.cascades 1.2
  
  Container {
      Container {
          layout: StackLayout {
              orientation: LayoutOrientation.LeftToRight
          }
  
          Label{
              overlapTouchPolicy: OverlapTouchPolicy.Allow
              text:"Initial Text"
              minWidth: 600
              animations: parallelAnimation
          }
          Container {
              overlapTouchPolicy: OverlapTouchPolicy.Allow
              layout: DockLayout {
  
              }
              ImageView {
                  overlapTouchPolicy: OverlapTouchPolicy.Allow
                  imageSource: "asset:///images/hotels.png"
              }
              ImageView {
                  overlapTouchPolicy: OverlapTouchPolicy.Allow
                  id:imgsource
                  imageSource: "asset:///images/hotels.png"
                  opacity: 1.0
  
              }
          }
          gestureHandlers: TapHandler {
              onTapped: {
                  if(parallelAnimation.isPlaying()){
                      parallelAnimation.stop();
                  }
                  parallelAnimation.play();
              }
          }
  
          animations: [
              ParallelAnimation {
                  id:parallelAnimation
                  TranslateTransition {
                      id:translate
                      toX: -20
                      toY: -300
                      //duration: 1000
                  }
                  ScaleTransition {
                      id:scaletransition
                      toX: .2
                      toY: .2
                      //duration: 1000
                  }
                  FadeTransition {
                      id:fadetransition
                      toOpacity: 0
                     // duration: 1000
                  }
  
                  onEnded: {
                      console.log("On ended parallel animation");
                      translate.toX = 0
                      translate.toY = 0
                      scaletransition.toX=1
                      scaletransition.toY=1
                      fadetransition.toOpacity=1
                      //parallelAnimation.stop();
                  }
              }
          ]
      }
  
  }
  

  I made the image to translate into original poision in onEnded ParallelAnimation but its not working. The label is visible only after tapping the container again. And further taps plays not the animation.

  Please help me with this.

  use a sequential Animation:

  first run your ParallelAnimation

  then the following reset of translations

• Property variant removes the animations?

  Start at the beginning.

  property variant images
  

  I have my container where I add images to.

  Container {
              id: drawContainer
              layout: AbsoluteLayout {
              }
  }
  

  from there...

      attachedObjects: [
          ComponentDefinition {
              id: imageDefinition
              content: ImageView {
                  imageSource: "cute_cat102.jpg"
                  preferredHeight: imageHeight
                  preferredWidth: imageWidth
                  animations: [
                      TranslateTransition {
                          toX: 400
                          duration: 1000
                      }
                  ]
              }
          }
      ]
  

  I add images dynamically, like this

  var imagesTmp = Array();
          for (var n = 0; n < 3 * numberOfTiles; n ++) {
              imagesTmp[n] = imageDefinition.createObject();
              imagesTmp[n].translationX = getX(n);
              imagesTmp[n].translationY = getY(n);
              drawContainer.add(imagesTmp[n]);
          }
          images = imagesTmp;
  

  So far so good. I can access any of these images and move them if I use images [0] .translationX.

  However, the animations are a problem! They work for imagesTmp but not for images!

  imagesTmp[0].animations // [object Object]
  imagesTmp[0].animations[0].play() // works
  
  images[0].animations // QVariant(QDeclarativeListProperty)
  images[0].animations[0].play(); // TypeError: Result of expression 'images[0].animations[0]' [undefined] is not an object.
  

  I wish I could be able to play animations of images, but as you can see, it won't let me. What I've done wrong?

  I need to have access to the images outside the service in what I create them.

  Hello
  Please try if it works:

  the property list images

• Change the speed of the animation of the symbol

  Hello

  I am new to this and I desperately need help!

  Right now I'm working on an animation project really really simple html.

  He needs a couple of functions. First two work (play / pause). No problem...

  But there are also variables to speed up the animation or slow it down. And I have no idea where to even start.

  I tried a few collaborative but they never seem to work.

  Either way, it's Dutch. The text 'hair' means speed.

  Link: http://test.gerko.org/toerental/

  Hello

  The speed depends on the duration of the effect.

  Here's a demo file: speed timeline.zip - box

• Duration of the layer adapts MainComp duration

  Hi guys,.

  I have this problem...

  I created a few videos with a progressbar... I created a comp with progressbar, with 10-minute...

  Now, I'm importing progressbar comp in the main computer, but I need, the time is automatically adjusted with the duration of the main computer, or better an audiosample...

  Is there a way to script to accomplish?

  Kind regards

  Michele

  You can also use the in and out point of an audio layer in the expression that I gave you. It would not cut your comp to the length of the audio layer but it would give you a progress bar that would scale up as the played audio layer. Try this by naming your audio layer "audio" and applying this preset (CC or later). It was a good idea that I built an animation preset to add to my library of more than 200 that I use all the time. Dropbox - progress to audio.ffx bar

  Just save the preset in your user presets folder and then find in the Panel effects and settings preset or click Browse for the preset from the Animation > menu to apply predefined Animation. This preset will give you a new shape layer at the bottom of a model of HD that is filled with a gradient and which can develop into the top of the left during audio playback. He does not cut the model at the right length of length but it will do the job.

  

  

  This is the expression:

  l = thisComp.layer("audio").outPoint - thisComp.layer("audio").inPoint;

  t = time - inPoint.

  x = Math.ceil (linear (t, l, 0, 0, 101))

  y = value [1];

  [x, y]

  The solution you gave my friend Mathias would work very well on an animated demo, but she also wouldn't give you a fully automated solution, which truncates your comp to the length of your audio or your video layers.

  You can also use the term in the expression instead of the layer and point to l. it would give you a progress bar which began to evolve with at the point of the layer and has continued to evolve until the end of the composition.

  l = thisComp.duration - inPoint.

  t = time - inPoint.

  x = Math.ceil (linear (t, l, 0, 0, 101))

  y = value [1];

  [x, y]

  There are many ways to achieve this with just an expression, but none of these will give you a fully automated way of creating a model with an audio layer and a progress bar that corresponds to the duration of the layer audio or video in the model. That takes a script.

• Question of the animation...

  Hi guys.

  I'm doing a simple animation. I want to fade and resize a list inside creationcomplete. My problem is that I still see the flash before the beginning of the animation of the element element. In other Word, the user will see the element appear 1 second-> then fade and resize animation. I was hoping someone here could help me with this. Thank you...

  my code.

  AS:

  protected function compList_creationCompleteHandler(event:FlexEvent):void

  {

  compinfoResult.token = getCompList.compinfo ();

  compinfoResult.addEventListener (ResultEvent.RESULT, completeLoading);

  function completeLoading(event:ResultEvent):void {}

  fadeList.play ();   the animation is triggered when the list gets the result of the server...

  scaleList.play ();

  }

  }

  MXML

  < s:Scale id = "scaleList" scaleXFrom = '0' scaleXTo = '1' scaleYFrom = "0".

  scaleYTo = "1" duration = "500" target = "{compList}" / >

  < s: bland id "fadeList" alphaFrom = alphaTo = "0" = "1" target = "{compList}" / >

  < s:List id = "compList.

  width = "280".

  = "560" height

  x="0"

  y="0"

  alpha = '0 '.

  creationComplete = "compList_creationCompleteHandler (event)" "

  itemRenderer = "itemRenderer.compListItemRenderer"

  Exchange = "compList_changeHandler (event)" / >

  Hello

  You can try something like this, obviously setting the properties that you want to use

  David.

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx" minWidth = "955" = "600" creationComplete = minHeight "application1_creationCompleteHandler (event)" > "

  Import mx.collections.XMLListCollection;

  Import mx.events.FlexEvent;

  Import mx.rpc.events.FaultEvent;

  Import mx.rpc.events.ResultEvent;

  [Bindable] private var empArr:XMLListCollection = new XMLListCollection();

  protected function getdata_faultHandler(event:FaultEvent):void

  {

  TODO self-generating method stub

  }

  protected function getdata_resultHandler(event:ResultEvent):void

  {

  EmpXMLCollection.source = event.result.children ();

  fader. Play();

  }

  protected function application1_creationCompleteHandler(event:FlexEvent):void

  {

  getData.send ();

  }

  ]]>

• How to customize the animation of gout?

  I dig in the flex sdk 3.2 and found that the animation of the fall of flex drag-and-drop support is hard coded in the DragProxy class like:

  If (action is DragManager.NONE)
  {
  Return to the initial position interpolation
  var m1:Move = new Move (this);
  M1.addEventListener (EffectEvent.EFFECT_END, effectEndHandler);
  M1.xFrom = x;
  M1.yFrom = y;
  M1.xTo = startX;
  M1.yTo = startY;
  M1. Duration = 200;
  M1. Play();
  }
  on the other
  {
  Zoom in on the location of the mouse to show drag has been accepted.
  var e:Zoom = new Zoom (this);
  e.zoomWidthFrom = e.zoomHeightFrom = 1.0;
  e.zoomWidthTo = e.zoomHeightTo = 0;
  e.Duration = 200;
  e.Play ();

  var m:Move = new Move (this);
  m.addEventListener (EffectEvent.EFFECT_END, effectEndHandler);
  m.xFrom = x;
  m.yFrom = this.y;
  m.xTo = parent.mouseX;
  m.yTo = parent.mouseY;
  m.Duration = 200;
  m.Play ();
  }

  And the DragProxy class is excluded from the class, so this means that there is no way to customize the animation drop in flex?

  Correct, it is not possible to customize the animation of the drop. You can file a request for improvement at http://bugs.adobe.com/flex ?

  To customize, I think you'll have to monkey patch your SDK and Exchange on your own version of DragProxy.

• Determination of the duration of the .swf file

  I need to find the length of several Flash .swf files, however, I do not have the full program, I only have Flash player. Is there a way to determine the duration (minutes and seconds) of the .swf files (short using a stopwatch ) by the player, or via a plugin?

  Hi UDeckM,

  Duration of the Flash movie is * really * subjective. If it is just a straight line
  movie playthrough (like an animation), then it's all simply a matter of
  multiplying the framerate of the movie (say 30) by the total number of frames in the movie
  (the main timeline _totalframes property). The reason why this is the case
  subjective, however, is because a movie can work on a single framework
  (as more focused on Flash applications do), so this may be entirely incorrect.
  Hope this helps at least.

  Kind regards
  Patrick Bay
  BAY OF NEW MEDIA

  "UDeckM" wrote in message
  News:fnu6g4$o1a$1@forums. Macromedia.com...
  > I need to find the length of several Flash .swf files, however, I did not
  > have
  > the full program, I only have Flash player. Is it possible to determine
  > the
  > duration (minutes and seconds) of the .swf files (short using a)
  (> stopwatch ) by the player, or via a plugin?
  >

• Disable the animation full screen by scanning

  On my MacBook, I love using the function "drag between apps full screen (with four fingers). Unfortunately the animation slide slows down the whole process. Previously, I used the soft areas that has a parameter to disable this animation. On El Capitan, spaces is not really supported. This is why I would like to know if there is another option to disable this animation.

  Go to system-> Trackpad Preferences

  

  Uncheck the "scan between apps fullscreen.

• How can I disable the animation when I'm on the home page of Firefox?

  I have Firefox as the page start page that appears whenever I run Firefox. But I don't like animations that always appear now that I've upgraded to 29.0.1 for Mac. (The shooting star and the animation of 'space invaders'.) They are distracting. How can I disable the animations?

  If you prefer not to see excerpts on the topic: home page, you can set the pref browser.aboutHomeSnippets.updateUrl an empty string on the about: config page.
  Delete the storage\moz-safe-about + House in the closed Firefox with Firefox profile folder (Firefox > Quit) remove the snippets stored in IndexedDB and use Firefox default value.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  You can reset the browser.aboutHomeSnippets.updateUrl the default pref to reactivate the code snippets.

• remove the icon of the animation homepage

  I have no animation on the home page. How can I easily reset it to a simple chart?

  FreshAir wrote:

  The Firefox start page was showing no animation before browsing (no more bouncing blue stars)
  

  Is this to say that the problem is solved, or that you still see a logo animated on the default home page? If the problem is resolved, please mark the correct message as the solution. In other words, unless you honestly think that those currently marked resolved, in which case I'll just shake my head and move along.

  FreshAir wrote:

  the snippets are still appearing.
  

  With updates from disabled, you just don't you new footage, which includes things like the animated map, flashing Firefox logo to the left of the code snippet and the bouncing star behind the main logo icon. You always get the default snippets included with Firefox, that are not animated.

• How to stop the Animations of Chrome

  How to stop the animations in Chrome? We're wasting resources and slow down the user interface, especially when the user interface is already slow due to the nature of Firefox non-multitraitement. It is like throwing cement on a turtle.

  The animation of the tab bar has a pref browser.tabs.animate related to this and can be set to false.