During the passage of an e-mail confirming a friend, unable to connect request

Similar Questions

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• CC in Lightroom on Windows 10 crashes during the passage of the library to develop.

  Everyone has a problem with Frost during the passage of the library to develop modules in Lightroom on Windows 10 CC?

  Hi mgmagney,

  This could be because of the graphics processor.

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.

  Kind regards

  Claes

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Larger images Popup during the passage of the mouse on the photos (was: in Dreamweaver CC 2015...)

  I have thumbnails that I would have larger popup on the passage of the mouse. Can't do it in any way. Any help?

  Here is an example usage of CSS3 transform:

  div #socialmedia a {img:hover
  -webkit-transform: scale (1.3);
  Transform:scale (1.3);
  -ms - transform:scale (1.3);
  }

• Router WRT54G does not connect to the internet during the passage of the modem cable to fios buildings

  I recently had need save money and cut off my cable service. Fortunately my building has a service that they lead in all apartments. It's just an ethernet wire that runs into my apt... (I pay for it with my mainentance). The router linksys has worked with the cable modem, but as soon as I plug the service buildings (i.e. Fios) it doesn't let me go on the internet. If I hang the service buildings until dirrectly on my Vista PC or Mac OS 10, it works fine but as soon as I set up the router I get an unable to connect to the internet message on Firefox, IE and Safari.    Ive updated the ware closes on it and Ive reset router noumerous times. IM at a loss.   Would appreciate any help.

  Probably, you will need to reconfigure your modem. Here is the procedure.

• XP SP3 causes BSOD during the passage of the WYSE Thin Client session to session VMware VDM Web Access

  Hello

  For our VDI environment, we use both clients Wyse thin (Thin OS 6.2.0_16) and VMware VDM Web Access to access Windows XP virtual machines that are available through the VMware VDM connection server. The connection and the agent server is at version 2.1.1 build-663. We run ESX 3.5 and Virtual Center 2.5 times with update 3.

  The issue I'm having is once a Windows XP SP2 virtual computer has been upgraded to SP3 will be blue screen when I try to access it for the Wyse terminal after his last accessed from VMware VDM Web Access. Order real to get there would be to access the VM SP3 from the Wyse Terminal, then go VDM Web access, and then again from the Wyse Terminal and it will have a blue screen. Disconnect or disconnect makes a difference. I'm curious to see if anyone else has this problem. I enclose the capture of blue screen and the mini dump file. If you need more information please let me know.

  Thanks for your help!

  -Pete

  Hi Peter,.

  The root cause of the problem is change colordepth of 15 bits to 16 bits. Let me explain the cause of the problem.

  -Connection of the terminal WYSE in a VM XP - effective colordepth in the RDP session = 15 bits

  -Access Web VDM from PC connection (I guess) - effective in the RDP session colordepth = 16 bits.

  -The switch back to results WYSE Thin Client = 15 new bits

  This actually switch between colordepth 15 bits to 16 bits and viseversa result BSOD.

  Thank you to use DesktopColorDepth = 16 RGB565 = Yes command in your wnos.ini and try to place this order through brokers VDM. It should solve the problem.

  Thank you

  Blanchon

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• After the download of 33.0, pages non-mozilla give unable to connect error, firewall exception has not helped

  Now, I get this error:
  Unable to connect

  Firefox can't establish a connection to the server www.fanfiction.net.
  Firefox can't establish a connection to the server www.gmail.com.
  Firefox can't establish a connection with the server at www.facebook.com.
  Firefox can't establish a connection to the server at www.youtube.com.

     The site could be temporarily unavailable or too busy. Try again in a few moments.
     If you are unable to load any pages, check your computer's network connection.
  

     If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
  

  can connect at all on pages, firefox wasn't already on my list of firewall, added to the list without change

  The announcement of chrome, which I prefer not to use if avoidable, any help or advice would be welcome.

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• Overview of e-mail list 9.3 cup during the passage of the mailboxes

  Since the upgrade to El Capitan and the new Mail (9.3) when I switch between the mailboxes, the preview of the list is cut as shown in the screenshot below. If I resize the preview pane displays the full text of the preview of the list, but this is obviously not optimal. I searched around and don't see reference to it as a known bug. Any ideas?

  

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Screen turns off during the passage of programs (version 38)

  Second time thanks to this... It started yesterday. When I tab (switch) between programs on my desktop, the thunderbird display shuts off. Sometimes, he returned in a few seconds. Otherwise, if I click on the Calendar tab and then return to the e-mail tab, it clears... until I have turn back. This does NOT happen with other open program windows. There is no upgrade for all programs that I know. Very annoying.

  I reinstalled 31.7.0 and the problem disappeared. Had tried the betas v.38 and they did the same thing. Very strange and I was about to go to another client, because it was so boring. Party at the moment. Whatever it is, it has to do with v.38.

• show e-mail address during the composition of new e-mails, mail OS 10.10.5 v.8.2

  How to show the email address I sent you of when composing new emails, mail OS 10.10.5 v.8.2

  It does not show in the line?

  

• bottleneck during the passage of the redo log files.

  Hi all
  
  I'm using Oracle 11.2.0.3.
  
  The enforcement team has indicated that they are facing slow at some point.
  
  I followed the database and I found that at some passage of redo log files (not always), I am facing a slow at the application level.
  
  I have 2 son since my database is CARS, each thread has 3 groups of multiplexed redo logs the FIU, with size of 300 MB each.
  
  Is it possible to optimize the switch of the redo log files? knowing that my database is running in ARCHIVELOG mode.
  
  Kind regards

  Hello

  Yes, Oracle recommends 1 validation by 30 calls from users or less. Of course, every database is different, so this rule cannot be taken too literally, but in your case, this rule seems to apply. In any case State, 900 undertakes seconds it looks like a very large number and the need for a high number of transactions should be questioned. You should talk to your analysts/application management/enterprise architect if warranted - that is to say if the application does in fact almost 2 000 business transactions per second.

  What about DB CPU: here is a link to a blog that I wrote on this subject, it should help to better understand this number:

  http://Savvinov.com/2012/04/06/AWR-reports-interpreting-CPU-usage/

  But briefly: DB processor isn't a real event, it is simply an indication that the sessions are on CPU (or waiting for CPU) rather than wait on i/o requests or events in the database. It is not necessarily a bad thing, because the database must perform tasks and he cannot do without loading the CPU. It may indicate a problem in two cases: when the CPU usage is close to the limit of the host (OS stats section indicates that you are very far from there) or when the CPU is a % of DB time - in the latter case, this could mean that you are making too many logical reads due to inefficient plans or analysis too. In any case, this does not apply to you, because 20 percent is not very high a number.

  Other items in the list of the top 5 deserve attention, too - gc buffer busy acquire, gc current block busy, enq: TX - line lock conflict.

  To summarize, your database under a lot of stress - whether it is the legitimate workload, and if this is the case, you may need to upgrade your hardware later. There is chance that it isn't - for example a high number of runs may indicate that rather than to bulk operations database code using PL/SQL loops, which is a big performance killer. Check "Top SQL by executions" about whether or not this is the case.

  Good luck!

  Best regards
  Nikolai

• markers on clips do not move with the project during the passage of the media players

  Here's a strange. I am trying to edit a project in Premiere Pro CS6 and to avoid transporting readers back and forth between two mounting locations, I cloned the drive of images and have a player doubles at each location. I'll call them site A and B.

  I have no problem relinking clips when I move back from one place to another. That everything works fine, as expected.

  When I review of clips to the location of the edition was, I was put a marker on the moments of heroes to make them easier to find later when editing. The strange (or maybe quite normal) thing, it is that when I change the location B and connect the clips, all my bearings I made at the location has disappeared.

  The same thing occurs when creating markers on clips to location B. If I move to location A, constituted markers at the site has it, but the new that is added to the B went... until I go back to location B.

  In other words, it seems that markers are not saved as part of the project, but are saved in each clip file. If that's true, which I'm experience would be wise. Although I reissue of links clips when I change places edit, the markers are part of image files on each of my drives duplicate and do not move with me, when I change places.

  I just wanted to confirm that it is ' how first pro work ', or see if there is a check box preferably or solution, I'm not aware of. Maybe I've found a bug? If it's just like that, I'll have to find another way to mark the images I'm reviewing, or simply move the disks with me when I move, I want to avoid.

  Thanks for all thoughs about this person has.

  Billy Sheahan

  Chicago, Illinois

  benwinter,

  The marker data are stored in XMP "sidecar" files that live either next to or near the MXF media files. The files will have a similar name as the images with which they are associated and an .xmp extension. You should be able to copy these files in location A to location B (be .xmp files in the same exact location relative) and markers must appear for you.