Dv4-1275mx

Similar Questions

• HP Pavilion DV4-1275mx remote control driver

  I run a Windows 7 Enterprise operating system, and I was wondering if someone could help me find the driver control DV4-1275mx remotely. The system works well, and I would like to get the driver for better comfort. I tried a couple that I found, but no luck yet.  Thank you.

  This widget could not be displayed.

• HP Pavilion DV4-1275mx not display and no hard disk power activity

  I have a laptop HP Pavilion DV4-1275mx and when I turn on the computer, the fan turns on for a few seconds, then turns off, then the caps lock and the locking witnesses Flash on and outside.  The HARD drive on the front light shows any activity, what is the problem?

  Hello
  Click on the link below:
  LED white screen error codes

• buy the update or complete, if vista problems

  It's about whether I should buy windows 7 updated version or full.

  dv4-1275mx has had problems for many months now with slow speeds, freezes, crashes, locks etc..  (note I had to reinstall the computer to its factory State a couple of times, and the problem persists so im sure its not virus) initially, I thought it was causing Media Center all the problems that I always get an error "media smart tv TSR has stopped working" and always seemed to be something running one the down payment (with the busy light flashes like crazy) the computer running slowly.  After that all these months I just found it's the registry causing most because it works fine now (after the execution of the tool pc registry mechanic) but still with media center and occasional freezes with windows Explorer errors.

  If I use windows 7 upgrade, if it "recycle" files of vista (which might be corrupt) continues to give me the same problems in windows 7.  If this is the case, will install the full version of windows 7 get rid of my vista problems (I guess they are problems and not hp vista).

  I see that nobody has answered your original question - what version should you buy?

  The decision you need to make has been described by one of the others - do an 'upgrade' or a 'clean install '?  You will have both of these options if you purchase the upgrade version.  You will get no benefit at all to purchase the full version.

  It is always better to do an install clean (which erases everything on the machine), especially if you are having problems with the system.  Yet once again, this can be done with the upgrade package.

• Error chkerrBB.cmd detects an error during the PININST_BBV. chkerrBB.cmd check c:\system.sav\logs\BurnBootWarn.log, unable to perform the system recovery

  Original title: Vista system recovery failure

  I have a HP dv4-1275mx laptop and I just replaced the hard drive.  I got the Vista hp HP system recovery disks but recovery has failed 3 times.  The hard drive is new and has more space than the old.  It is a Western Digital 640 GB scorpio blue sata 5400 RPM.

  Error message:
  chkerrBB.cmd [17:18:51.36] detect an error in the PININST_BBV.
  [17:18:51.37] chkerrBB.cmd check c:\system.sav\logs\BurnBootWarn.log

  Hello

  I would say to contact contact HP support to:

  HP customer service

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• I forgot my bios password, how to reset it

  I have a laptop dv4 1275mx I bought on ebay. When I received it, I ordered the recovery disks and reinstalled the os and software to factory spec and then made sure to protect the bios with a password. I started having problems and reformatted the HD and reinstalled the operating system with the recovery discs. the password for the bios, I remember does not work. How to reset the bios password?

  Welcome to Genoa.

  Try.

  69875496

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Windows XP 32-bit on dv4-1117nr installation

  I am trying to install Windows XP 32-bit on dv4-1117nr, who initially installed Windows Vista 64-bit.

  However, whenever I start using the XP installation CD, it shows the Blue error screen and asks me to restart.

  Is there something wrong in the process?

  Thanks in advance.

  These instructions are from the user "answertome".

  The video is in Italian, but just pay attention to the screen, I was able to follow the instructions and make it work.

  Like the previous user said, you will need to format your hard drive, all first as well.

  first of all, you must have a regular o XP Professional licence. Vista Home is not inlcude the right to downgrade to XP.

  When you have your XP CD, if you try to install youi will have a screen of wheat with the code error: ERROR STOP 0xX0000007B. This because the Microsoft XP CD is missing from the AHCI driver for the SATA drive controller.

  You must add the AHCI driver on the XP cd using nlite software.

  the steps you need to do are:

  (1) download and install Nlite from site nliteos.com web

  (2) downlaod driver AHCI from HP ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39786.exe

  (3) If you don't know how to use nlite, just look at the little clip that you can find here http://www.filecloud.com/files/category.php?user_category_id=283210

  You can see 2 clips:

  (1) add SATA driver by controller ICH9 (intel Montevina) .avi-> This shows how to add only the driver AHCI (a few words in Italian)

  2) integrareSP3_e_SATA_AHCI_finale_con_audio_e_logo2.avi--> This shows how to add the SP3 and the driver AHCI (audio in Italian, but you can understand it enough to see the video)

  When you have your new CD with SATA/AHCI driver, you will be able to install XP on your laptop

  Ciao

  Answertome

• HP Pavilion dv4-1120br: doubts about the BIOS update for my model with the operating system current instaled.

  Hello

  I have a HP Pavilion dv4-1120br, I know that this model of HP laptop is old, but I instaled the 64 bit of Windows 10 on my machine and saw that my BIOS is version F.30 and the last of them available on the site of HP F.66 has.

  The problem is that this model is not suport for Windows 10 because, as I said, is too old. Can I download and run the update of the BIOS for Windows 7 64-bit available in the Web site, or I need to downgrade my OS to Windows 7, update the BIOS and then pass it back to Windows 10?

  Thanks for the help!

  Cantarino

  Hello;
  
  Let me welcome you on the HP forums!
  
  Your second proposal is correct - as the updates to the BIOS on the HP site are specific to the OS version and if you try to run one for Win7 in Win10, it will refuse to run.

  Good luck

• How to capture a screenshot on my HP Pavilion dv4 laptop so I can paste to word? Thank you!

  How to capture a screenshot on my HP Pavilion dv4 laptop, so I can paste to word? Thank you!

  Hello:

  You have a print screen button?  Probably abbreviated. Prnt Scrn

  You may need to use the Fn + the print screen key if it is combined with another article on the same key.

  Paul

• ENVY dv4: REFRESH/RECYCLING

  I have tried my laptop (dv4 ENVY) to 120 Hz and were unsuccessful. He repeats to me COULD NOT FIND the ENVIRONMENT of RECOVERY. INSERT YOUR WINDOWS INSTALLATION OR RECOVERY MEDIA, THEN REBOOT YOUR PC WITH THE MEDIA. I don't understand what that means. Can anyone help please?

  Hello

  Thanks for posting in the HP Support forum. Welcome aboard!

  -If your computer came with Windows preinstalled by HP (aka OEM Windows)

  -If you want to recover your computer to the default factory condition

  -If you have used the F11 option or started from inside Windows

  and you have received this message, perhaps the recovery partitions are broken/not intact or absent.

  You will need to purchase and use HP recovery media to restore the default settings.

  Option 1) you can contact HP support to see if they can offer you original recovery media for this computer (aka recovery DVD or USB). Info > > http://support.hp.com/bg-en/document/bph07143

  Here's how you can contact them:

  > > http://support.hp.com/us-en/contact-hp

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  Option 2) if there is no recovery to HP support, you can try to contact

  http://www.best2serve.com/page/rcd_landing   OR http://www.computersurgeons.com/

  Once you get the recovery media, here are instructions how to recover:

  > > https://www.youtube.com/watch?v=PC3sUc3lr3E

  Please, let me know if it works.

• Pavilion dv4: problem in installing drivers

  Hi everyone, I am facing a problem by installing the following drivers. Please help me. Thanks in advance.

  Notebook: pavilion dv4
  OS: Windows 7 Ultimate

  1 standard VGA Graphics adapt - version: 6.1.7600.16385
  Hardware ID: PCI\VEN_1002 & DEV_6741 & SUBSYS_1646103C & REV_00
  PCI\VEN_1002 & DEV_6741 & SUBSYS_1646103C
  PCI\VEN_1002 & DEV_6741 & CC_030000
  PCI\VEN_1002 & DEV_6741 & CC_0300

  2. Ethernet controller
  PCI\VEN_10EC & DEV_8168 & SUBSYS_1646103C & REV_06
  PCI\VEN_10EC & DEV_8168 & SUBSYS_1646103C
  PCI\VEN_10EC & DEV_8168 & CC_020000
  PCI\VEN_10EC & DEV_8168 & CC_0200

  3 PCI Device-
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1646103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1646103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  4 unknown Device
  ACPI\HPQ0004
  * HPQ0004

  Hello:

  What is the complete model number or the product number of your laptop?

  Many products are on the label as well as the serial number.

  Other than graphics, here are the other drivers you need...

  Ethernet: 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  PCI device:

  1 driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  0004:

  This will install HP 3D DriveGuard, which offers protection for internal laptop disk drive if the computer accidentally falls or suddenly hits another object. This package is available on mobile phones supported with supported operating systems.

  File name: sp53462.exe

• drivers Windows 7 for HP dv4-1430us requirement...

  Hi, I need drivers pre installed and installers on my dv4-1430us, im planning to upgrade to windows 7...

  Hello

  Here are all the drivers for 64 bit Vista system your to your model. They must also work under Win7.

  If you have installed the official HP Win7 driver wait until October 22. They must be released up to that time.

  Alternatively, you can install a driver with Windows update. All the information about it here or just look for drivers on your sites of hardware vendors.

  If you have still any help let know us.

• dv4-3010tx: installation driver issues and wifi

  Hello ,.

  my model number: dv4-3010tx

  Product name: Pavilion dv4

  My number 1 problem is that my wifi connects to my modem, however it is unbearably slow to the point where it does not load even of any url.

  I'll start with my chipset driver problem

  I installed all the drivers for chipset, besides for INTEL MANAGEMENT ENGINE INTERFACE 6.0.0.EXC because I installed version 7.0 and the installation of driver chipset INTEL TURBO BOOST TECHNOLOGY DRIVER I get the error:

  AN ERROR (5006: 0 X 80070003) HAS CAUSED WHEN RUNNING THIS SETUP PROGRAM. PLEASE MAKE SURE YOU HAVE FINISHED ANY PREVIOUS SETUP AND CLOSED OTHER APPLICATIONS. IF THIS ERROR PERSISTS, PLEASE CONTACT YOUR DEALER. INTEL.

  Error code:-5006: 0 x 80070003
  Error information:
  > SetupNew\SetupDLL.cpp (841)
  pAPP:Intel (R) framework installation
  PVENDOR:Intel
  PGUID:40FEF622 - 6E0F - 46 B - 824 6B - A40C178FD4CD
  $12.0.0.49974
  @Windows XP Service Pack 2 (2600) IE 8.0.7601.17514

  The second problem im seen that may be linked to this chipset do not install it, I have no idea.

  When you install the Realtek LAN (LAN) driver, I get FINDFILE failed error.

  Not sure if it's relevant, but I'll throw a few other information out there. In the device under the OTHER DEVICES tab Manager he listed: "Ethernet controller", "PCI Device" and "unknown device".

  In conclusion, I want to just my internet to work! Thank you for reading! Help!

  Hello:

  I would try the driver chipset from Intel directly on the link below.  Install and reboot.

  https://Downloadcenter.Intel.com/download/20019/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-

  And Yes... If the chipset driver is not installed, which could affect the ethernet driver to not proceed with the installation.

  Also, I would use the new ethernet directly from Realtek driver if you install the above chipset driver.

  3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  PCI device: 1 driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Unknown device has probably need this driver...

  This will install HP 3D DriveGuard, which offers protection for internal laptop disk drive if the computer accidentally falls or suddenly hits another object. This package is available on mobile phones supported with supported operating systems.

  File name: sp53462.exe

  WiFi: Try a newer driver... a 1st on the list on the left side of the Web page.

  https://Downloadcenter.Intel.com/download/23723/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-

• env y 4 (DV4 5300) ID of Bus series universal usb 3.0 controller

  Hi all

  I received my new desire 4 DV4 5300 with windows 8. I decided to install Windows 7. Everything was installed successufully, but USB 3.0 controller (USB 3.0 ports on the left do not work).  I forgot to write down of the maid, the USB 3.0 controller model before I deleted Windows 8.

  Can you just reply with the manufacturer, the model of USB 3.0 or any USB controller in your dv4 5300 desire (Envy 4)?

  It does not matter if you're running Windows 8.  I just need the information to find the right driver for the USB 3.0 controller in Windows 7.

  BTW, install W7 was not really complicated.  Find the drivers was :-).

  Thank you.

  It's Intel usb 3.0 and you can try this driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104873-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278243 & sw_lang =

  There is another model that has drivers Win7 and Win8 posted. You need no driver usb 3.0 for Windows 8 as he took her "native" usb 3.0 support. Windows 7 not so... needs driver.

• Cannot install driver for hp pavilion dv4-2045dx cd player

  Computer: HP Pavilion dv4 2045dx using Windows 7 (64-bit)

  I currently have problems with my computer's CD drive.  He has been unable to read discs of any kind of music, DVDS and software programs for several months now.  The main problem seems to be with an inability to properly install the driver for the cd drive.

  When running "find and solve the problems" of section "Troubleshooting" in the Control Panel, I get an error message that says that there is a problem with the driver for the cd drive.  Whenever I try to install the driver, he is not able to do so and contact the manufacturer of your computer.  I also tried to download all the updates and I get essentially the same message.

  Also, here's all that I've done so far.  I followed all these steps, but the last two listed in the help or support of the site.  Here is the link I used:

  http://support.HP.com/us-en/document/c01897812

  I couldn't do a restore of the system in step 7, because the last date that I could find to a restore point has been today (or yesterday).  In addition, I couldn't do step 8.

  Any help would be greatly appreciated.

  Thank you

  Hello:

  See if ongoing automated microsoft fix tool for you works.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  If AutoCorrect does not work, try the manual fix in section "Let Me difficulty it myself, ' on the link below.

  Right to the title of this topic is a "click here to view the solution."

  http://support.Microsoft.com/kb/982116