dv4-2169nr hung on backup image now startup requires the selection of boot

Similar Questions

• Windows complete PC Backup Image - impossible to restore the backup on my laptop after the restoration of the C drive.

  My user profile is not loaded correctly, and so Sony told me to do a restore of the C drive which took my drive C back to factory settings and lost all my programs and files.  I tried since then to restore the Windows Image backup I did on my external hard drive.

  I open backup and Restore Center, click Advanced Restore, click Advanced Restore again.  The box application to what you want to restore?  The only option is to files from a backup made on a different computer.  I click Next, and he said: select the location of the backup to restore.  Hard drive, cd or dvd option has already found new Volume (e), which is my external hard drive.

  I click Next again, and he says, select dates to restore from.  The only option in the box is dated 2008-01-12 14:14:34 backup location is not available.  My external hard drive has multiple backups on it, including the Windows Backup Image (which was the first backup, I did and it contains 152 GB), and so I do not understand this.

  I continue, and then click Next.  It now says select files and folders to be restored, but there is nothing in the box.  I have check the restore everything in this backup box and click Next.  I save the files restored to the following location - check and navigate to the C drive.  I also check both boxes: restore files to their original subfolders and create a subfolder for the drive letter.  I click on begin to restore, and then he said:

  Restoration was unsuccessful.  Error: the parameter is incorrect. (0 x 80070057)

  I'm desperate to be able to get my programs and files back on my laptop.  I don't understand why the restore function can not see my Windows Backup Image, and why this is so difficult.  I've read other complaints by users about this, but cannot find a solution.

  I look forward to hear from you.

  Thank you.

  Hi HGHFaith,

  I suggest you try the following steps:

  Step 1 : Clean boot the computer and then try to restore

   

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 2: Run Check disk to repair bad sectors on the hard drive.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. type E: (external drive) and press enter

  c. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

   Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Check whether the problem is resolved

  For more information, see the link below

  Restore your computer from a system image backup

  HTT://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Was a change made? : before the jpeg photo showed up at the upper-left corner of my screen, with a white background for the screen. The image now appears in the center of the screen, and the rest of the screen is completely black.

  By the way, when I put the url in Safari, it's the same as before, namely the image appears in the upper left corner, and the bottom of the screen/monitor full is white.

  You can try it with this URL to jpeg:
  http://www.antiquegamblingchips.com/Crest/bison.jpg

  Yes, it is a new feature in Firefox 11, which was designed to improve the readability of images. You can install the https://addons.mozilla.org/en-US/firefox/addon/old-default-image-style/, which restores the change if you don't like it.

• Download the image does not match the selected image - incorrect cataloguing.

  Hi have downloaded an image but it does not match the selected image.  He has obviously been catalogued incorrectly.

  AdobeStock_40645074

  Can you please SRS.

  

  The image image / I download who is it

  

  Thank you

  Hi Karen,.

  I have a license of the image on my end. You are right, that the preview is incorrect for the file I.

  We would get the image inspected and you will receive a credit on your account by Monday, May 16, 2016.

  Kind regards

  Gerard

• JPEG image is displayed in the selected image files folder

  When the discovery of the computer and selecting the image file folder - I use to get the small real individual images of each image in the folder without having to enter in the Windows Photo Gallery.  Now, I have only an icon, the same as that for each of the images and the only way I can see that the actual image is to select a specific icon and hope that is the image I'm looking for.  Can someone tell me how I can get all the individual photos in the folder of image file to display when I select that folder?

  Hi looking, advanced

  Thank you for visiting Microsoft Answers.

  I first suggest you to change the display of the photo icons folder type medium or large icons and check if that helps.

  To do this, follow these steps:

  Open the photo folder. Click view > select icons medium or large icons.

  Make sure that default programs > associate a file or protocol type with a program, file types .bmp, .ico, DIBs, .jfif, .jpeg, .jpe, .png, .png, .tiff, .tif, .wdp file names must have the default program like Windows Photo Gallery.

  Otherwise, select the type of file name, click on change program and browse to choose as default Windows Photo Gallery.

  Additionally, set the global folder options

  To specify the global settings that apply to all folders, follow these steps:

  1. Click Start, click Control Panel, and then double-click Folder Options.
  2. On the general tab, click the options you want.
  3. In the view tab, click the options you want.
  4. Click OK.

  Note To restore the default settings for all folders, click restore defaults on the general tab or on the view tab.

  Use the same display settings for all folders

  You can apply the same view settings to all folders on your computer. You cannot apply the same view settings for all folders, images icons, toolbar settings or tasks folder. To apply the same view settings to all folders, follow these steps:

  1. Locate and open the folder which includes the display setting you want to use for all folders.
  2. On the Tools menu, click Folder Options.
  3. On the view tab, click apply to all folders.
  4. Click Yes, and then click OK.

  Note To reset all folders to the default display settings, repeat these steps, but click reset all folders in step 3.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System backup Image against the system recovery disks

  Hello

  I'm new to the system recovery things and I have a question...

  I just bought a new computer laptop m7-1015dx of Pavilion and need to do system recovery discs... (which I realize restore laptop to factory default)... BTW, I have already created the system repair disc.

  However, I read an article on creating a system backup Image allowing you to recovery if lost EVERYTHING, all your installed programs, etc.

  First Question:

  Can someone tell me if I do the backup IMAGE of the system...

  Do I still need to create recovery disk (mfg default) system also?

  The second Question:

  If I create system recovery disks can I still this Recovery Partition?

  I am really really wanting to partition my C:\ drive... it is huge

  In addition, I hate to see storage folders involved in system folders...

  Currently using a symbol/character to separate them.

  From now on, I can't partition the C:\drive all partitions are used as... Max is 4

  and I have 4... C:\drive, System Partition, Partition HPTools and recovery Partition.

  Any help or assistance would be appreciated.

  Thanks for the research.

  Best regards, Jenn

  Hi, Jenn:

  I'd certainly recovery disks because in the case of a hard drive failure, a recovery partition is unnecessary because it would be on the failed drive.

  Recovery disks will do the same as a recovery partition. Reinstall the operating system and programs supplied with your laptop.

  I have also copy off the coast of the C:\drive SWSetup folder and store it on a portable hard drive that contains all files Installer provided with your PC (except MS Office 2010 Starter).

  You can also make your own Windows 7 installation disc and have a nice bloatware without installing windows, and then install only the programs you want from the SWSetup folder.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You can get rid of all the partitions you want to if you plan to use recovery or disc of Windows 7 installation method that I posted above.

  I write my product key and store them somewhere for more security that many people report that it fades if you keep the laptop on your lap a lot, and then you wouldn't be able to use the alternative method to install W7.

  Paul

• sudden lack of plateau systems & under points icon passed now, even if the program is still daily backups

  The backup icon is suddenly missing from the system tray, but he always does daily backups as expected.  He used to have a daily splash screen when opening to the top of my pc and appear in the startup.

  Thank you

  Lydia

  Hi Lydia,.

  Thanks for posting the question in the Microsoft Community!

  The backup icon is missing from the system tray and you would not get the backup to the starting screen.

  To help you better, we need more information.

  You use any third-party backup program?

  I suggest you to check if the option for the backup program is disabled in the list of startup items.

  To do:

  a. Click Start, type msconfig and press enter

  b. now click on the Startup tab

  now see if the option for the backup program is enabled.

  You can also perform a virus scan.

  Visit the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

   

   

   

   

• Confused after backup image

  I did a full backup image of my HDD on an external drive. \

  OS is VISTA ULTIMATE 32

  I then upgraded to W7 and now can not access my old files.

  I have to reinsatll vvista and if so, I can of my HDD - ext

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  A Windows complete PC backup image contains copies of your programs, files and system settings. It is a complete backup of the system that you can use to restore the contents of your computer if your hard disk or an entire computer ever stops working.

  When you restore your computer from a Windows complete PC backup image, it is a complete restoration. You can not choose to restore individual items and all your files, system settings and programs are replaced.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Image Backup - where can I find the previous image after new backup?

  My previous hard drive died, and I replaced it.

  Good news: I did a backup of the system before the death of completed HDD.  The image is under "WindowsImageBackup" folder on my external drive.

  Then I replaced the HARD drive, picked up at the factory reset.

  Before restoring the image backup, I took a step extra stupid: I thought that I should save its current state before as I have restore the previous state in case any thing wrong, so I started to sign--> system and security--> backup and restore--> backup now

  Bad news: the new backup image sub-folder of "WindowsImageBackup" even erased my previous image!  They have different timestamps, so different names, but the previous image has disappeared after a new creation.  In fact, I killed the new backup process immediately after that I was disappearing from the previous image.  He has not finished, but I can't find my previous image!

  BTW, there is a lot of space on my drive.  It is only 20% used!

  Are there ways I can retrieve my previous image?

  BTW, I use Windows 7 Home Premium.  By default, all parameters are as I do factory reset.

  Suggestions and help is very appreciated!

  Hello

  With the publication of the description, I understand that you have accidentally deleted the system image backup file. I've certainly you will help answer your query.

  I wish to inform you that there is no way to get the previous system back image - which has already been replaced however, you can try a few steps to get the old image to the top, although there is no guarantee that it will work but still, you can try and see if it helps.

  First of all, I suggest you to rename the WindowsImageBackup to WindowsImageBackup. Old then follow the screenshot and select the option highlighted in yellow color select another backup to restore files of.

  

  Hope that this help, please write us back for any further assistance on this point, we will be happy to help you further.

• Cannot restore Windows 7 from backup image

  I created an image of Windows 7 Pro SP1 and recorded on the D partition on the same drive. I also created the CD boot recovery during this process.
  When I boot on the restore CD, I have the opportunity to select the image that I saved to D, but it says windows cannot be restored as backup is located on the same drive and the system needs to format the entire disk. I copied the entire image (about 30 GB) USB drive, and then click Start Restore CD. Now when I browse the path on the USB disk to the backup that has been copied from original source, it says not found backup files. What is the problem? backup folder everything is there.

  Thank you, Frederik, place the folder "WindowsImageBackup in the root of the drive D:\ solved the problem.

• Why can't find my backup image in the list of versions in windows 2008 r2 Recovery Wizard?

  before the format of the server with configuration all custom and application, I did the windows for the C: drive image backup, and this was done smoothly. now when I try to restore this image (using the win boot disk), it does not list this backup image. Although, the image works with VMware software on hyper-v.

  Concerning

  Hi Samisherif,

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  I hope this helps.

• Complete restoration of the Server 2008 R2 vmware workstation for windows backup image 9

  9 workstation.

  I am trying to restore a backup of windows server r2 2008 (made with the built-in windows backup) on an existing installation of vmware server 2008 r2. Basically, I just want to replace the facility with the backup version.

  The problem is, the windows to the backup image is on a USB key.

  The restore process is:

  1. Connect the usb host drive
  2. Insert the windows server r2 DVD in drive
  3. initialize the Server 2008 r2 comments and press the button ESC at startup, then boot from the CD
  4. Select 'repair' installation
  5. but here's the problem, windows backup image is on my USB, but at this stage I do not see the USB key from the client in the repair installation process.

  Ideas of the best way to do it?

  Thank you

  Okay, downloaded the ISO Image of Windows Server 2008 R2, created a new Virtual Machine, added the Windows Server backup and made a full backup without the destination for the backup drive, a USB Flash drive.

  Started the virtual machine of the ISO Image and it does not see the backup from a USB Flash drive, although I can see it from the command prompt.

  Also created a record gross hard pointing to the USB Flash drive and started the virtual machine of the ISO Image and he does not see the backup of the hard disk gross of the Flash USB drive, because the Virtual Machine had problems during the boot process.  Forget the exact error message, but I tried as a whole disk and a partition.  So the why I tested it by copying it to a normal file depending on the disc hard virtual (and worked).

  Finally I created a regular file based hard and copied the backup folder of the USB Flash it and then started the virtual machine drive of the ISO Image and it had no problem see the backup from the normal file based hard.

  It seems that you have to take the long way around, but at least, you should be able to see!

  I know not when booting from the ISO Image or a disc of Windows Server 2008 R2, backup tools command line are available to restore the image however you could examine the issue.  I would like to but I just don't have the time at the moment.

  Post edited by: WoodyZ - modified comment re: Raw Disk

• can we take copy of rman backup image in several places

  Hi all

  We are planing to move the database from the old warehouse to new storage on the same server.

  planing to use RMAN image copy to copy the files db destocking former new storage, then switch database to copy.

  Now dbfiles on/U01, / U02, /u03, /u04, and we are planing to move to the new storage /u05 / u06 /, /u07

  Is it possible that I can copy all the dbfiles in /u05 / u06, / u07

  Backup in the database copy format ' / u05

  As I know that I can move one place. Is there any copy of way in several places using the copy of the image.

  Please suggest.

  Thank you

  You can use DB_FILE_NAME_CONVERT to make the operation easier.

  Take a look at The Concepts of RMAN backup

  Thank you!!

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• All my addons have been deleted and lost. Even backup has been removed in the latest update of FF. Now addons will not appear and add on bar does not appear. How to fix?

  All the Addons are missing after a recent update of FF. Backup also failed. How the hell that happened? made me? Went back to recharge add on extensions that I needed to use. However, add it to the toolbar does not appear. Tried restoring add on extension of tool bar. Now I add it on the toolbar in the verified Tools menu that was not there before. However, add it to the toolbar doesn't show always upward. Custom selection is worthless because it does not show that the extension add ons. I can check the extensions downloaded in add it menu and they are activated. However, they are not work or appear as it should!

  It is a bigger problem than the simple click here or there.

  I would say definitely go for the clean reinstall of Firefox. Your problem is obviously much more complex then just a misconfigured setting or something. When you updated Firefox, something may be wrong. The instructions are in the post 5.