DV5220us will not identify Seagate 500 GB Sata 7200 RPM hard drive XP

Similar Questions

• New HDD in my Dell INSPIRON N5010 laptop, will I go to 5400 RPM or 7200 RPM HARD drive

  I bought the DELL N5010 laptop about 4 years back, and currently it is more under warranty.
  2 days back my hard drive crashed and could not start or install the OS as there are bad sectors on the hard drive has. I plan to buy a new hard drive.

  Which one should I go for a 5400 RPM or 7200 RPM. I would go to 7200 RPM, as it is faster, but I read on the internet that the 7200 RPM generates more heat then 5400 RPM and my laptop is already facing heating problem. I had replaced the fan about 2 months as my laptop used to close because of the heat. The problem of heating has not changed, but laptop does not stop :)

  Anyone using the DELL N5010 laptop with a 7200 RPM HARD drive and he's fine?

  Any kind of recommendation will be greatly appreciated.

  Kind regards

  Sach

  Thanks for the recommendation. The sales in the shop man also recommended the same thing. I bought Seagate 5200 SSHD(Solid State Hybrid Drives) which is still better than the conventional hard drive. :)

  Kind regards
  Sachin

• After the upgrade 320 GB sata 7200 RPM to 256 GB transcend drive ssd

  my computer information are:-

  1 probook 4420 s (14 ')

  2 processor 2.27 ghz-core i5 430 m first generation (3 MB cach-64 bit)

  3 ram 8 GB 1333 bus (after upgrade)

  4.OS - windows 8.1 pro 64-bit.

  5.HDD - 256 GB transcend ssd after upgrade (after was Hitachi 320 GB 7200 RPM)

  _______________________

  My Question is...

  1. I used HP 3D guard player when use Hitachi 320 GB 7200 RPM HARD drive.

  NOW, I want to know to use 3D software guard drive after upgrade SSD HARD drive?

  3d can damage the SSD or custody of drive?

  because after upgrade windows 8.1 Pro, in Device Manager it show unknown device '? After installation 3d player it keeps show OK. !

  That's why I want to know is - this safe for the SSD or not?

  Hello

  There is no need in fact HP 3D DriveGuard for one SSD as there are no moving parts - this application is not relevant to a mechanical hard drive, where sudden movements, detected by the accelerometer cause the drive heads be "stored" in damage to storage media.

  However, as your machine has an "accelerometer" leaving this driver installed will not affect the function of your SSD and prevents the Device Manager appears an 'unknown device '.

  Kind regards

  DP - K

• Satellite A135-S2356 - BIOS will not identify SATA hard

  Hello everyone, hope you can help out me.

  Got a Satellite A135-2356 opportunity, everything seems fine but BIOS will not identify SATA HDD, shows no disk BIOS downgraded to 1.30, not good, upgraded to 1.40, not good. BIOS has no change/test/detection of HDD/SATA settings options. Tested the drive in another laptop and it reads very well. Received the Toshiba (Vista Basic 32) recovery CD, but given that the BIOS will not read the disk, can't do anything. Cleaned contacts, not good. This HARD disk must be too large, or something for the Board of Directors.

  * Hitachi HTS541612J9SA00 120 GB SATA, 5400 RPM *.

  Thanks for the help!

  Hello Richie

  To be honest, I do not think the disc is too big for your laptop. I can imagine that your laptop can handle with drives of 160 GB too. Unfortunately there is no public document on the possibilities of HARD drive upgrade. I can imagine that ASP in your country has information about such things.

  It's also quite strange that HDD is not recognized correctly. Long ago, I had the same problem. Every time when I used F12 at startup disk HARD were not as boot device. Solution in my case was to upgrade the BIOS to the default settings. I believe that your BIOS has already the default settings, but try to do it again.

• HP Photosmart Prem 310a went offline suddenly and will not identify the SSID to run the Network Setup Wizard.

  All of a sudden the printer has gone offline a few days ago.  Went through all the diagnostics, etc. but nothing fixed.  A solution-Assistant will not work cause it will not identify the SSID of the network that he has done since it was installed (long ago).  Have tried everything I can find online, unless I don't understand or is not quite apply and still nothing.  Wireless network works with everything except the printer. I am not very computer so I do not understand most of the letter & numbers abbreviations used here.  Help.

  It may be a heat problem - radio from the printer gets flakey when it's hot.

  Finding 5 wireless networks should - Yes you have one, but your neighbors also have.

• R40 to r50e harddrive swap, will not identify wireless or video

  My r40 with xp pro suffered a hardware failure of catastrofic, but my hard drive was intact. I need all the info on it and had not saved. a friend had a r50e has not been used and so I pasted the hard drive of the r40 at and kicked upward. everything works FINE except my r40 had no wireless. It has always had, but now he doesn't know it's possible. In addition, my video controllers also do not work. I think the video controllers are a driver problem. any ideas? This could be difficult.

  http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-54042 - display driver

  http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70480 - wireless card.

• DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive

  Original title: Dvd rom problem

  Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?

  Hello

  1. When did you start to question?

  2. did you of recent changes on the system?

  3. you receive messages or error codes?

  You can check the following link and try to run the Fixit and check.

  Your CD or DVD drive cannot read or write media

• Computer laptop (Vista) does not take account any new working USB external hard drive

  Hello, I'm under the latest version of Windows Vista Edition Home Premium on a Dell XPS M1210 and spin in the problems with the connection of my second USB external hard drive. In other words, when I plug the drive (a Seagate expansion 1 TB), nothing happens. Literally nothing, no notification of installation of the driver, no sound is played stating that the system recognized the device, no new entry in post working or disk management. I connected this drive on another computer running Windows 7 and it worked without a problem, so I do not suspect the problem to lie in the hard drive, but with my computer. My other external hard drive USB, a Maxtor Basics Portable 250 GB, works perfectly, but there more than two years. I bought the 1 TB Seagate as a backup and an upgrade, but I plan to go back now that there is nothing more than a big black Clipboard with a green LED clear too much room. What can I do about it?

  Hello
   
  Most likely, there is not enough power for the USB port of your machine to the external device do recognize. As a test I would have you test the issue on another USB plug.
   
  I recommend you contact you either OEM (Original Equipment Manufacturer) or the manufacturer of the motherboard if it is a machine of casting House and get the latest chipset drivers for your motherboard.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Lilbra5 question game "game cannot be started because there is not enough disk space to run memory or hard drive."

  I installed a CD for an expansion set. But when I try to play, I get a message that says "game cannot be started because there is not enough disk space to run memory or hard drive." What should I do?

  Thanks Lilbra5

  Hello

  try to do a right click on it and run as administrator

• T61p will not identify new SATA drive

  Hello

  I recently bought a drive Seagate Momentus 7200 RPM 320 Gig - http://www.seagate.com/docs/pdf/datasheet/disc/ds_momentus_7200_3.pdf (on sale at Best Buy for $99 - who could resist that?)

  If the disc in the drive Bay, it works perfectly - Vista sees the complete concert 320 and it works without a doubt faster than my main 5400 RPM 160 Gig of support. However, if I install the drive as primary, the laptop does not start at all - the BIOS does not see the drive. I checked in the BIOS - the only SATA setting I have is to toggle between 'AHCI' and 'Compatibility Mode' and in each framework, I get the same result - the BIOS does not recognize the drive.

  Model T61p - 6459-CTO

  Vista Ultimate 32 bit

  Latest available BIOS and system drivers installed

  Any help would be appreciated.

  emotivecto wrote:

  However, if I install the drive as primary, the laptop does not start at all - the BIOS does not see the drive.

  What exactly you are doing when you are installing the drive as primary?

  The symptoms you describe seem to indicate that the disk is not docked in the Bay.

  See you soon,.

  Bill

• Seagate external HARD drive expansion will not identify Windows 7 x 64. OK in a first time and fine on Vista x 86.

  Recently installed Windows 7 Home Premium x 64 Vista Home Premium x 86. Under Vista, everything was fine. Less than 7, my Seagate expansion (1.5 TB) hard drive initially was recognized (I have iTunes library I can't play to prove :)) after a few days using 7, however, I lost the external HARD drive. I get the error message is "software device driver is not properly installed." In Device Mgr, it says it's an "unknown device" with the yellow! triangle. "Windows has stopped this device because it has reported problems. (Code 43) "appears in the details of the device. No updated drivers are available. Windows updates are up to date, nothing helps. Restart, reinstall, restore driver, deactivation, nothing works. Tried to update my BIOS, but it is already the latest version of Dell. Trying any other Dell Update, what it offers is the Download Manager, but not actual updates I select. I'm not allowed to use this player all of a sudden, after that it worked fine for a few days!

  Specific features of the system are as follows:

  Name of the operating system Microsoft Windows 7 Home Premium
  Version 6.1.7600 Build 7600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name PHIL-PC
  System manufacturer Dell Inc.
  Inspiron 530 s model system
  System Type x 64-based PC
  Processor Intel (r) Pentium (r) Dual CPU E2180 @ 2.00 GHz, 2000 Mhz, 2 Lossnay, 2 logical processors
  BIOS Version/Date Dell Inc. 1.0.18, 24/02/2009
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume3
  Hardware Abstraction Layer Version = "6.1.7600.16385".
  Physical memory (RAM) installed 4.00 GB
  Total physical memory 4.00 GB
  2.54 GB available physical memory

  Thanks in advance for any helpful info!

  All this occurred within three days of using Windows 7 x 64, so I don't think there is a previous restore point to go back to. However, I would not I install updates to be rendered unusable and allow my system, and their insecurity. And, as stated in my original post, I have gone through the drivers to uninstall or disable normal, remove, reinstall, etc. etc. without help.

  An update my original post, I finally got the unit of work, although not as fast as it was in Vista x 86. I did back up the device to a laptop from Vista Home Premium I have, let it load the drivers it needs, and then after reconnection to 7, it has been working well, but overall slowly in read/write functions and clicking on a lot more than he did primarily when operating. What I went through get this thing to work, I think that the currently loaded driver is for a 32 bit OS, and there is no update (again) for 64-bit. I leave it alone, because it is functional, and if it is not recognized after the next set of Windows updates, I guess I have to restore to a previous image.

  Dell doesn't seem to have anything for her, and Seagate plans explicitly on their site that they don't provide drivers for this HARD drive while referring to Microsoft or the manufacturer of the equipment for drivers.

• XPS 8300 will not identify data reader 5 to

  I have a desktop computer XPS 8300, Windows 7/64, 12 GB of RAM. Boot drive is a 500 GB SSD, and there is a SATA 2 TB of data. I'm a photographer, so I need a lot of data storage.

  I just bought a Toshiba MD04ACA500 5 to to use as a data drive (NO boot).

  My XPS 8300 can see the drive, but insists on the fact that it contains only 500 GB of storage, not 5 TB. I did the following:

  • Run Diskpart from a DOS window.
  • Run Diskmgmt.msc;
  • Run the tool to partition a third party
  • Also, I went through Windows KB 2581408 procedure of adding a player of great size.

  No matter what I do, the drive is detected as only 500 GB.

  The XPS 8300 is possible to work with a 5 TB drive? If so, how?

  Thank you, Ed

  Disks over 2 TB software needed to work with disks of large capacity and NEED 64 Bit Windows.  INTEL RST integrated in win7 is 8.x, which means that he WILL NOT see large capacity disks. Seagate manage it with the driver and utilities.

  • 2 t of learning beyond
  • Interactive Guide for disks more larger-Than - 2 TB

  http://www.Seagate.com/support/downloads/beyond-2TB/

  INTEL RST 10.1 at least is NECESSARY for advanced format drives.

  With windows vista or 7 install ATA mode then the microsoft patch is necessary before moving on to the AHCI.

  https://support.Microsoft.com/en-us/KB/922976

  Once passed to Ahci and work, you install the version of the RST that works for your model.

  Latest and most recent versions of the decline of the RST support more older chipsets.

  The latest 15 13 or 14 or 11 or 12 may not work.

  Before 9.x, it was called MSM (Matrix Storage Manager)

  It changed of MSM to RST in the 9.x versions.

  10.1 or greater is required for the GPT partitions greater than 2 TB.

  9.6 or higher is required for larger than 120 Gig aka advanced format drives.

  V9.6 driver Intel Rapid Storage Technology (RST) and above.

  http://www.Intel.com/support/chipsets/IMSM/sb/CS-031502.htm
  http://www.Intel.com/p/en_US/support/highlights/chpsts/IMSM

  9.6.0.1014

  https://Downloadcenter.Intel.com/download/15251

  10.1.0.1008 is the version of transition.

  https://Downloadcenter.Intel.com/download/20104

  10.6.0.1022

  https://Downloadcenter.Intel.com/download/20707

  11.0.0.1032

  https://Downloadcenter.Intel.com/download/20868

• Windows Vista will not see Seagate 320 internal drive to format

  I bought a 320GB Seagate (7200 RPM) opportunity and I'm trying to install Vista on it. The computer BIOS sees the drive, but loading Vista it does not show the HD as an external drive and ask drivers for it. The disk has been previously formatted for Mac.

  Try to use SeaTools for Windows.  See also: Seagate Installation Assistance

  Please note that the hard drive needs to be internally mounted inside the computer because Windows Vista will not install on an external hard drive.

• New installation of Windows 7 will not identify the second internal hard drive

  Attempted recently to upgrade a computer running the SP3 of XP to Windows 7.  Bought the new FULL version of 7.
  Have two 1 t Seagate Barracuda SATA drives on board; Operating system in partition 1 of disk C:. second disc to store data only.

  Several unsuccessful attempts to install 7, but with helpful suggestions, others on this forum, (i.e., update of the BIOS, re-formatting drive C to do a clean install, etc.) finally managed to a successful installation.

  All right, except that it does not find my second hard drive.  I have the disks attached ports SATA 1 & 2, but the system reads them so much as the C: drive.  The second disc appears in the BIOS Setup and Explorer as just the C: drive.

  Tried to change the SATA port for second drive to 3 and 4 with the same result.  It always appears as the C: drive.

  How can I get the systΦme can recognize the drive, so it can be assigned to a drive letter and I can access?  I suspect that the reformatting of the first disc for installation probably erased some boot sector/configuration info.

  A side issue: before attempting to upgrade to XP, I backed up my "Documents and Settings" on an external drive.  Now that XP is passed to the computer, can I continue to use Windows Easy Transfer to retrieve all my settings and info from the program, or who's going to screw me up?

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.