Dv6-6C38TX - pad touch LED?

Similar Questions

• Pavilion dv6-6c38tx: Pavilion dv6-6c38tx - can I switch from 8 GB to 16 GB

  I have a Pavilion dv6-6c38tx with 8 GB of Ram.

  I want to know if I can improve this 16 GB model but I can't seem to find the answer to this question.

  Would appreciate your comments.

  Thank you

  Hello

  The following specifications said: Max 8 GB:

  http://support.HP.com/us-en/document/c03200989

  But Maintenance and Service of Guide (page 4), says it supports 16 GB:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5191856/model/5219431/manuals

  In my opinion, that it supports 16GB. Please download the manual and use the information (plug RAM, reference...) where to buy and upgrade of RAM

  Good luck.

• HP DV6-6C38TX new installation, drivers must

  Hello, as stated above, I bought a HP DV6-6C38TX, and I did a new install of windows 7 Professional 64-bit.

  I have the drivers for almost all devices, are the only ones that are not

  Ethernet controller, the top line id is

  PCI\VEN_10EC & DEV_8168 & SUBSYS_3388103C & REV_06

  SM Bus controller, the top line id is
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_3388103C & REV_05

  Standard VGA Graphics Adapter (I need drivers for a M 7690) error this device cannot start. (Code 10), id of the line of the top is
  PCI\VEN_1002 & DEV_6740 & SUBSYS_185E103C & REV_00

  Unknown device, id of the line of the top is

  USB\VID_138A & PID_0018 & REV_0078

  Cheers, Sam

  You use the drivers of your models support page? Intel chipset should be done first with a reboot before others:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5219430#N354

• Need Driver for HP Pavilion DV6-6c38TX WLAN

  Hey everybody,

  I recently bought a HP Pavilion DV6-6c38TX and decided to wipe and upgrade them with a fresh install of Windows 7 Ultimate.

  This means, of course, I need drivers for some hardware components and am fine with everything except WLAN.

  I tried the drivers (Intel and Ralink) of the support page for the laptop and yet it still won't install.

  I'm fairly certain that the WIFI adapter is an Intel one, but could someone point me in the direction of the right driver!

  As this is a new laptop which was released only recently, it is difficult to find appropriate elsewhere help so any help is greatly appreciated!

  Hello:

  You have a WLAN Atheros adapter.

  Here is the link to the latest drivers for it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  See you soon,.

  Paul

• Qosmio X 300-pad touch does not work

  Hello, I opened and cleaned my toshiba qosmio X-300-130 and when I turned it on evrything worked fine except my touchpad that it did not work or the buttons, so I reinstalled the driver PAD SEMANTICS, but nothing changed so I reinstalled my WINDOWS 7 64-BIT but once again no change, pls pls help!

  I don't know how to help you. All we can say here is that you should check the connection of cables tochpad and be sure that all three touch pad flat cables are correctly plugged into the Council of touchpad.

• Pad touch and function Fn + F5 does not work on the Satellite a series

  Hello

  I just install a windows Vista & I have install the driver after download it from the net, but I found this;

  1 - switch between the screen & s-video (fn + f5) does not work but the other work of function (fn)

  2 when I put my finger in the right of the mouse pad you have to scroll the screen & at the bottom of the touchpad, it should scroll left & right on-screen, but it did not work

  So please tell me the solution if it is a problem of driver or program.
  Please give me the direct link

  thinku

  Hello

  What cell phone do you have?

  I imagine that your laptop comes with XP and now want to use it with Vista OS.
  Please note that you should install the Package Toshiba Vista value added to use all the features of the laptop.
  Very important is the pilot of common components and the TOSHIBA Flash Cards.
  The Flashcards provides the Hotkey function and function of pitcher who starts the Hotkey function.
  Please reinstall!

  The additional touchpad functionality must be configured first.
  This can be done in the control panel-> mouse

  Here, you should look for the touchpad settings and able to configure touchpad again scroll areas.

  Good bye

• HP Envy: HP Envy Log with pad touch screen PIN

  How can I get the touchpad to reappear so that I can connect with my PIN? He disappeared without warning. I tried to go into the center of the unit, but I saw no option for the keyboard.

  I think that I had a similar problem with my HP spectrum x 360 13-4132ng, Windows 64-bit 10.
  
  The connection with touchscreen and the PIN is possible but sometimes (often), when I click on the input box to the PIN on the login screen, the PIN-keyboard is displayed for one second, but immediately disappears again. I start the laptop and lift my finger on the touch screen (so that users are visible). Then, I am able to enter my PIN code with the keyboard. But the problem is that it takes about 10 seconds (5-20) to get the keyboard screen appear. I tap on the box with my finger, so that the virtual keyboard (with numbers only) appears, but then half a second later, the keyboard screen disappears again. After trying this several times (tapping in 3 to 10 times the input box), on-screen keyboard, finally, is displayed.

• HP Pavilion DV6 mute of touch panel remains orange

  For some time now, the 'secret' button on my computer laptop dv6-2155dx rest orange all the time - if the sound is turned on or off. How can I fix it? It works when you press it, the color simply never changes...

  

  Hello

  Try the following - this implies that you are under Windows 7.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48668.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45629.exe

  Once the relocation of Chipset is complete, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.

  When this has completed, restart the computer again before checking if the button on the capacitive strip now changes color correctly.

  Kind regards

  DP - K

• HP dv6-2174tx screen touch volume control display missing

  I have HP dv6-2174tx I formatted the hard drive and partitioned as I wanted. reinstalled windows 7 Home premium 32-bit. Everything works fine. I just lost the volume control on the screen that appears when you turn the volume upwards or downwards. I can't find the software/driver to be installed to make it work. Anyone know what that/where I might find it? Thank you so much in advance for any help!

  Hello

  To get visuals on the screen, you will need to download and install MediaSmart SmartMenu here (version 3.2.1.12 for 32/64-bit Win7).

  Before you do that you must have installed at least one application of the MediaSmart software package. The best choice will be in my opinion:

  MediaSmart DVD here (version 4.1.4328 for 32/64-bit Win7)

  Above solution have one flaw. When you adjust volume for example while playing games or videos online then the current window will be inappropriate to display visual effects. If this can be annoying you then uninstall system MediaSmart software and use another product that is:

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what can be done with the 3VRX software.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

• The satellite A 200 (PSAECE) pad touch and Windows 7

  Hello everyone!

  Recently, I installed Windows 7 RTM, everything works perfectly, however, I have a problem with my touchpad that doesn't seem to work. Windows Update installed a synaptic driver, and it does not work. Furthermore, I installed the value on the package, (despite the fact that all the fn keys already worked) and toshiba Alps and synaptic drivers for vista, which doesn't seem to change anything... Read other posts like this mine, I tried to find any option on the touchpad in the bios, but there is no one there in.

  Thanks a lot for your answers; It drives me crazy! :(

  You can use an external mouse?

• Tecra A10 - pad touch and the keys do not work on Windows 7 x 64

  We have recently done a new install of Windows 7 x 64 on a Toshiba Tecra A10.
  The operating system has taken over most of the drivers, we had to install drivers for the card reader ourselves.

  Our problem is that the touchpad and the buttons work at all.
  The driver displayed in devices such as manager being installed, but that's all. I even installed the control panel of the Alps (Vista x 64) which works very well.
  Have tried the settings "stick and touchpad are automatically invalidated" when you use an external USB mouse, all to nothing done.

  The equipment worked perfectly okay with Windows 7 32 bit installed.

  Is there a fix here?

  Hello

  Maybe it of just a driver issue, I checked the downloads available for Tecra A10 on page of Toshiba and Windows 7 32 bit there is a newer driver available for Windows 7 64 bits do not (no driver). If you use the Vista 64 bit driver

  What you can do is to test the driver for the touchpad for Tecra A11. There is a version more recent for Windows 7 64 bit of Alps Electric so correct. Touchpad driver is not linked so I sure it will also work on your model of m.

  Take a look at the Web of Toshiba Tecra A11 driver site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Qosmio F60 - pad touch and the keys do not work

  I tried to reinstall the control button under additional utility, but there are still problems.

  Hi wilson2022,

  Do you mean the buttons light between the keyboard and the computer laptop screen?

  If so, they are controlled by added value package, but before you reinstall this tool, first remove the old version. Restart the computer, and then install the latest version of package of value added again.

  Also, what OS do you use?

• Satellite A300 - pad touch dead after update BIOS 2.20

  Hello

  exact model is Satellite A300 PSAGCA-06M01N under Win XP.

  I had a problem with the webcam, and I read in the forum that it can be solved by a BIOS update. so, I advanced and downloaded the latest version of the BIOS on the site of toshiba, especially for my laptop model. It went quite well with no error.

  However when the computer restarts after that the BIOS updated my touchpad no longer works.
  I went to Device Manager and could still see the Synaptics touchpad device and it says "this device is functioning correctly. but its completely dead and will not respond with the 2 keys. before I updated the BIOS I never had any problems with it.

  I tried FN + F9, nothing helps. plugged in a USB mouse and it works without any problem. In fact, when I plugged in the mouse the synaptics software says "Deactivation of the key because of the external pointing device" for the device driver for the touchpad works.

  If I remove the mouse, it will say the touchpad is restored, but it still doesn't work. restarted several times and still the same problem. went into BIOS and chose "default" not still a no go.

  Can someone offer any advice or ideas please?
  I really need the touchpad for the way I use the laptop...

  Hello

  In many cases, the touchpad (pointing device) can be enabled and disabled in the BIOS.
  I think you should check if this option is available in BIOS and if so, check whether it should be enabled.

• Satellite C850-1GL win 8 - pad touch, speakers, WiFi no longer works

  Hi all

  My Toshiba suffered a number of problems.
  My touchpad and wifi, speakers no longer work.

  Im running windows 8.
  Tried a restore of the entire system to the factory settings but in blocked to do this.

  Any advice would be much appreciated.

  > Tried a restore of the complete system to the factory settings but in blocked to do this.

  In order to reset the laptop (make recovery) you have two:
  -Recovery disk (or flash memory)
  -HDD recovery

  What have you tried and how?

• Satellite A350D-201 - pad touch and two buttons doen't work

  After updating the BIOS from version 1.6 to 1.8 the two buttons and the touchpad does not work.
  USB mouse works. Pointing device-enable (bios).

  I decided to reinstall Win7, in a time of installation the sensor does not work!
  Disassembled the laptop, I found nothing.

  Help!

  Have you installed the touchpad driver after the installation of Win 7?

  If so, you should also check if the touchpad has not been disabled using FN + F9 keys
  Also recommend that you check the setting in Control Panel-> mouse-> Advanced tab
  Here, you have to go into the advanced settings.
  For all I know, you could turn on and off several options of touchpad and touchpad functionality.