DV6-7305se: Envy of HP DV6-7305se > what parts of the fan/heat sink assembly?

Similar Questions

• HP ENVY dv7t-7300 CTO Quad Edi: what part of replacement fan that I get for my laptop? Memory discrete or UMA?

  Hello, I have problems finding the right replacement for my hp laptop part. I have a laptop that needs to have his replaced fan/radiator. The laptop is the HP ENVY laptop dv7t-7300 CTO Quad Edition. I went online and find the service manual for the computer to find the spare part. There was a list of spare parts for the different variants of models.

  The results of narrowed it down in 2 results for spare parts. A fan/radiator was for a graphics subsystem with discrete memory and the other fan/radiator for a graphics system with memory UMA. I don't know which one is for my computer, could you please help clarify? The part 682061-001 or 682060-001 part?

  Model No.: dv7t-7300

  Product #: C2Y65AV

  [Personal information]

  Hello

  No, I'm talking about Device Manager. Hope that the sticker is good then your machine's discreet graphics because:

  • The UMA version applies to the motherboard that does not have a separate dedicated graphics chip. On this version, the graphics processing is managed by the North bridge chipset.
  • The discreet version applies to the motherboard with a separate chip to achieve all the graphics processors.

  Based on the sticker, your machine has NVIDIA GEFORCE GT M 635

  Kind regards.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Satellite P300 - 219 PSPCCE - what should be the optimal heat of CPU?

  Hello there;

  I use for my laptop Satellite P300-219 (PSPCCE) newly bought about a week now. When you type I can't help noticing, the place where I put my left hand, I want to say the empty space to the left of the touchpad, feels much too hot. I looked for the manual and I have learned that it is where the CPU.

  Then I searched for a way to measure the heat of CPU, and after having tested some programs with too many different measures, I led to believe that the 'CPUID hardware Manager"gives the best results, after you set the correct value TJUNCTION.

  Here are the steps I get today while typing this message:

  ACPI hardware monitor
  Temperature 0 45note ° C (112 ° F) [0xC6E] (THRM)

  Intel Mobile Core 2 Duo T6400 hardware monitor
  Temperature 0 56a ° C (° F 132a) 0 x [31] (Core #0)
  Temperature 1 54a ° C (° F 129a) 0 x [33] (Core #1).

  Monitor hardware ATI Mobility Radeon HD 3650
  53A temperature 0 ° C (° F 127a) (GPU Core)

  Hardware Hitachi HTS543232L9S monitor
  Temperature 0 37â? Â ° C (98A? Â ° F) (0 x 25) (Assembly)

  From now you mind, windows taskbar indicates that I use roughly about 15 & 35% CPU. After a little use, I even though the CPU heats by a maximum of 69a ° C.

  The truth is, I don't know what to do with these readings, is my laptop which works very well, or he has problems? Could someone please tell me what should be the optimal level of heat for a P300, or where I can learn?

  Thanks in advance.

  Hello

  In my opinion, everything is ok with your laptop, buddy and the temperatures are quite good. Don t be to worry about this!
  If your laptop could overheat, it would have to close or freeze immediately. If this isn't the case, everything is ok with the temperatures.

  What you can do is to change the cooling method in Windows power management. Here, you change between performance and battery optimized cooling.

  By the way: you should also clean your laptop at any time. I clean my laptop every 3-4 months using a jet of compressed air. This blows the dust from the cooling fans.

  Welcome them

• DV7-3065dx: what motherboard and the fan is in the laptop Dv7-3065dx?

  Looks like I'm going to replace a bad CPU and would like to know what are my options regarding the upgrade to a faster would be?

  Can someone tell me that HP, is there any where on the line, I can find it, or I'll have to just to go ahead and take apart and look at the numbers on the mobo?

  I would like to also know what model of fan I don't need, since I will replace who also while I am?

  the original processor is one - AMD TURION II ULTRA DUAL - CORE M600 (2.4 ghz)

  Thank you!

  You can find what your laptop systemboard is if you go to HP Partsurfer.

  http://PartSurfer.HP.com/search.aspx?IsmobileDevice=Y

  Once you have the part number and perhaps the number for a motherboard that has perhaps are more important than one installed, you can do a search online to find a supplier at the best price.  If it has been replaced, use the new part number.

  For the fan, it is quite simple. Simply remove the fan and go in a PC shop. Match the size and performance available fans, ensuring that the connector of the new fan has the same configuration as the original fan was. (there will be a connector 3 or 4 pin)

• T410s - what happened to the fan?

  Hello world

  The fan in my T410s had been very noisy until several days ago. I hit the keyboard above the fan area and it was really, really hot, so I closed the laptop. When I turned, I saw "FAN ERROR" on the black screen. I decided to stop it again and turn it back on. Then it started as so normal - all as usual. However, I noticed immediately that there is NOT MORE no fan noise, and what is more, I do not think any hot air forced out the cases where the fan is located. Other that those 2 things, everything seems to be normal.

  What has happened to the fan? Anyone know? What should I do?

  Thank you very much

  http://www.staff.uni-Marburg.de/~schmitzr/donate.html

  Download the software from above. You just need to install it. Let it in BIOS mode, then check the value of RPM of the fan from the CPU temperature.

• What parts of the world are covered with Mappoint, in order to display data in EXCEL?

  I want to use mappoint to display Excel data. MapPoint offers a card for all of Latin America and Caribbean area?

  For what I have seen, it seems that only USA and Europe are available, but not in Latin America?
  Perhaps, I understand the difficulties to provide a map of Latin America at the State level or city, but offering no not that at least at the level of the country is extremely disappointing.
  The complexity can be for microsoft to develop a map of Latin America to draw the data at the level of the country?... .probably not difficult at all!

  Hi Alex,

  MapPoint DO shows the limits of each country, towns and cities around the world (see the photo here). However, it allows to zoom level 1 mile in areas that contain (NA & EU) road mapping data, it allows only zoom up to the level of 95 miles in other parts of the world. This could or could not be a limiting factor for your project.

  I would say to download a free trial version and test it for yourself.

• What parts of the body are accepted in layer names?

  The tutorial says I can quote my layers with the parts of the body such as eyes, mouth, chest, etc. Is there a list of which parts of the body are recognizable? And what is the average + symbol in front of each layer name? I was not able to find this material anywhere.

  Go to the character animator help (Preview 2) and download the pdf file.

  On page 9, there is a section on the layers of body

  On page 11, control of the chain, and he said the sign '+' is part to deform independently

• New video card, what parts of the software should I install?

  Hello!

  I just built a new computer for a customer who is a photographer. For the best possible performance with the new video card NVIDIA GTX 760 and Photoshop CC, what elements of the software NVIDIA should I install, or even avoid? Or do I just install everything what it offers? This system will ONLY be used for retouching... no games, etc.

  Driver software of 344.11 displays the following:

  Graphics driver (Duh)

  3D Vision controller driver

  Pilot 3D Vision

  HD Audio Driver

  Miracast virtual Audio

  NVIDIA GeForce experience

  PhysX System Software

  Thank you very much for your help!

  Gregg Hill

  I installed everything except the "NVIDIA GeForce Experience" element.

  I put the computer today, and my client will get loaded and tested PS later today. She should be happy!

  Thank you very much for your answers.

  Gregg

• HP pavilion dv6 6c65se: what could be the maximum amount of ram updated in hp dv6 6c65se

  Hi I am asked to upgrade my ram to hp pavilion dv6 6cse65 memmory intel core i7 atm I (2 x 4 GB) = 8 GB total. Can I insert (2 x 8 GB) and the question is is that this lapop could argue that the amount of RAM?

  Operating system is Windows 7 ultimate 64 bit

  Hello

  Your machine already has 8GB max:

  http://support.HP.com/us-en/document/c03136222

  Kind regards.

• Location of what part of the program is running

  Hello everyone

  I hope my question is fairly easy to answer! I currently have a program that consists of a Structure of main business with 66 cases. Within the structure of this case, there are many other business structures. To run all the way through the program takes about 15 minutes. I was wondering when it is running, can I do something to make LabVIEW will take me to the exact point where it is currently in the program. Now I need to estimate where the values he has filled so far!

  Thank you

  Nicola

  Click the light buld to enter the highlighting of execution?

  Ben

• I understand no drivers... What part of the system they are assiociated with? I heard that they can be updated for best results. Is there a download that will do it? I'm under XP IE, windows 8

  I would like to fix? Drivers

  Drivers are software special low level designed to help an XP, Vista, Windows 7 operating system to communicate with the motherboard (hardware on your computer). There are drivers for Audio, network (Internet), USB, a laptop built in camera, Touchpad, etc..

  If Windows has not built in the driver (usually indicated by a? in Device Manager), you must download and install the appropriate driver from the web site of the manufacturer of the computer.

  A driver update is usually released and made available for the following reasons.

  (1) to correct a software bug.

  (2) to support a newer version of Windows (Windows 8 for example).

  (3) graphics card device drivers are generally the most frequently updated of all drivers, mainly to improve performance for games, but also when a new version of Windows is released.

  I usually do not update my drivers so I have no problems with the ones I already installed, it is because sometimes a newer driver may fix a problem while creating another.

  J W Stuart: http://www.pagestart.com

• I can't find my "Hp Pavilion Dv6-6c50se" on PartSurfer product, I need my part number of the fan

  Hi, as I said in the topic I can not find my product...

  Pavilion Dv6-6c50se
  My S/N: [under the direction of personal information]
  my P/N: A7P18EA #ABV

  now what? I really need to change my Fan and I can't get the part number of this one...

  Help, please.

  Hello

  Here is the user manual to help you: http://h10032.www1.hp.com/ctg/Manual/c03099531.pdf

  Go through the Page 27, 83-87, the part number of HP for the cooling fan / heat sink (includes the thermal material replacement) is 665309-001.

  There's another piece on textbooks for her number: 665354-001, but I could not confirm through research engine search or shop online.

  I suggest that you go ahead with the order of the fan with the part number: 665309-001. The fan is delivered as a whole Assembly. You can get separated from you want to through online stores.

  Here are a few:

  http://m.eBay.com/ITM/HP-Pavilion-DV6-6000-dv7-6000-Fan-Heatsink-650797-001-641477-001-665309-001-/111086784282

  http://PartSurfer.HP.com/search.aspx?SearchText=665309-001

  http://www.Amazon.com/GP/AW/d/B00IWMO0TU?pc_redir=1405404997&robot_redir=1

  http://www.Amazon.com/GP/AW/d/B008H68ZI8?pc_redir=1405525908&robot_redir=1

  I hope this helps to solve the problem,

  Thank you

• How to know exactly what part of a query is running?

  Hi guys,.
  
  I use the following query to see what queries are running
  

  SELECT
  a.sid, a.USERNAME, a.STATUS, b.sql_text
  FROM V$SESSION a INNER JOIN V$SQLAREA b
  ON a.SQL_ADDRESS= b.ADDRESS; 

  However, it is possible to get a further breakdown of the request? that is to say see what part of the explain plan command is actually done?
  
  Thank you

  Would you explain to a specific SID command.

  "accept Vside guest ' SID value enter:"
  rowset 132 off veri
  Col object_name form a34
  operation collar shape a45
  Select-lpad(' ',depth+1), rpad (' ', 132,'... |'))
  || operation | » '|| options of | ' '|| decode (depth, 0,' optimizer Mode ='| optimizer,' ') operation.
  object_name, cardinality, bytes, cost-, partition_start, partition_stop
  v $ sql_plan where hash_value = (select sql_hash_value in the session $ v where sid = & Vside)
  order by ID
  /

• DV6 - 2173cl: what the drivers of network adapter for LAN and WiFi for HP dv6 - 2173cl

  Hello

  I have reinstall my drivers for the computer hp laptop dv6 - 2173cl.  This laptop has LAN and WiFi cards.  I looked at the driver for this model and I see that for drivers WIFI HP has:
  Available drivers Atheros and Broadcom.

  I let Windows Update and it installed an Intel WiFi Link driver which is not yet on the Internet HP site.  I have

  Do I need to install Atheros or Boardcom WiFi driver for this model?    I'm afraid that, perhaps, the Intel driver is a generic driver that makes the card works but is not optimizing his performance as do dedicated pilots.

  How do I know what brand for the wifi card I have?

  Thank you

  You are the very welcome.

  You need the JMicron card reader driver for your model.

  You don't need the driver of Intel Matrix Storage manager.

  The Intel matrix storage driver manager is used for disk raid configurations.

  I couldn't find a W7 driver for your Intel card.  The site is down or they can't stand any more of the map.

  It states right they do not provide phone, chat or emal support for this card.

  So here is the latest driver I could find at HP.

  If it is newer that what update of windows installed, then you can install it.

  15.0 (February 14, 2012)

  FTP://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56162.exe