DV7-3065dx: what motherboard and the fan is in the laptop Dv7-3065dx?

Similar Questions

• Satellite A110: I need to replace the motherboard and the CD/DVD combo drive

  I have a Satellite A1100, and my CD/DVD Combo needs to be replaced... also, I need to replace the motherboard by qualifying the connections that connect the CD/DVD drive is damaged. Is there any possible way for me to get the motherboard and the CD/DVD combo myself or should I consider a service repair center?

  And if there is a way to get the spare parts of CD/DVD and a motherboard... can someone please tell me where I can get them from? If anyone has any idea how much it's going to put me back I would appreciate, they would let me know how it is... also, I would gladly help if someone can tell me what I can do about it.

  Thank you

  Hello

  How old is your machine? If you still have your warranty, so why not give your machine to a local service partner?

  So if you don t give something on your guarantee you can trade your coins. But to look for the pieces on google and you won´t get any help from toshiba (e.g. manual disassembly or something similar).

  I tried long before your request and I made my experience that if you want to open your machine your completely on your own.

  Welcome them

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• my power green LED flashes and the laptop does not start

  Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

  My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

  ankurgupta53,

  It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

• Satellite L300-PSLB8E - screen becomes all white and the laptop freezes

  Hello

  I have a Toshiba Satellite L300 PSLB8E. I initially bought with Windows Vista already installed on it. After a few years, I changed the operating system Windows 7 Ultimate. I installed the display and all the other necessary drivers (that is, sound, network, etc.).

  After I installed Windows 7, when I use the laptop for a while, the screen becomes all white and the laptop hangs. This happens spontaneously. Sometimes, in less than 10 minutes and other times that it can work perfectly for hours. I checked for loose batteries and other components, but everything seems fine.

  Physical damage only that there is a tiny crack on the screen in the bottom right of the screen. The operating system is not good? If I put windows Vista back as it was?

  Please advise and help understand me what the problem is with the laptop.

  Until we start discussion can you tell me what you do when this happen?
  Hard stop and restart?
  Is everything OK again when you do?

  It is not easy to say what exactly is the problem, but I put t think there is problem with OS and preinstalled display driver. A long time ago I installed Win7 Home Premium on friends L300 and it works perfectly.

  What you can try is to use the external monitor for a while and see if everything works well. If so, there is no problem with the operating system, drivers or graphics card. It may be that the display problem.

• Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Hello

  Thank you for your response.

  I appreciate that you have attached a screenshot of the problem.

  Have you tried troubleshooting of hardware and devices running?

  Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• When I'm looking online, I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.

  Hello

  I have a fujitsu lifebook p series windows 7 and every now and then especially when I am looking online I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.  I challenged tech stores to be looked at, but they were not able to fix it. Does anyone have any suggestions? Thank you
   
  Original title: help again...

  I have moved your question to area drivers & hardware.

  If your PC uses the Intel chipset, see this: http://communities.intel.com/message/172740#172740

  Updated drivers can be made of:

  https://Downloadcenter.Intel.com/default.aspx

  Best bet may be to contact the vendor of PC.

  -steve

• Satellite A300D - fan turns very hard and the laptop gets very hot

  I was wondering if someone could point me in the right direction as what to do with the overheating problem that I currently have with my A300D. I had the laptop for less than a year, it is still under warranty but I don't know where to go or what to do to fix it.

  The problem: about two months ago, I noticed the fan turns very hard and also the laptop gets very hot. Now it runs so hot the laptop shuts down completely. The heat being driven out of the laptop is so hot! burn your my infact.

  Anyone has any advice they could offer me.

  Thank you
  James

  Hi James

  You wrote that you have the laptop less than a year, so my question is this is already cleaned it?
  The laptop needs to be cleaned every 3-4 months and I do this every 3 months. Whenever I do I m wondering how much dust out and after this procedure the portable is a lot cooler.

  Here's an interesting article from Toshiba on this subject:
  http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

  Compressed air spray is really useful and you should check it out yourself! ;)

• What motherboard is the hp pavilion dv6 - 2140 ca - a?

  Hey guys.  Does anyone know what motherboard the HP Pavilion dv6 - 2140's?  I can't find the manual anywhere.

  My bios is damaged and would ' t fix after a reflash or changing the CMOS battery.  Time for a motherboard replacement.

  Thanks for the help!

  James

  Here is the manual... it is the same for the whole dv6 series:

  Manual

  You can find the part number of the motherboard inside the memory slot under the modules. Laptop computer motherboard are specific elements point... you need to get the exact HP mother for a replacement.

• HP S3120N. I replaced the motherboard and the power, now the recovery disks do not work.

  I'm not so happy owner of a HP Pavilion S3120N. I am running windows vista home edition. The motherboard went out so I replaced it with a Zotac GeForce 8200 - ITX Wifi series. Now the computer says it is noa a hp solution valid, and the recovery disks do not work. is there a way to fix this without buying a new operating system?

  Yes, return the Zotac motherboard and get an OEM HP/Compaq M2NC51-AR / HematiteXL-GL8E motherboard. I know that's not the answer you want to hear, but the recovery discs are locked to a specific set of HP/Compaq machines with specific HP OEM motherboards. Apart from this, you will need to buy a new OS.

  Frank

• How can I control what "drive and the folder" what creative cloud of loading

  MY boot of the SDS drive is analyzed very tight, I need to load the creative cloud and the MANY applications of my plan to load in and work from my F: drive.

  Thank you. I can't locate any advanced or just load options.

  Alan

  The Solution was in the CC settings > preference > applications tab > files tab

  The cloud control creative program location

  CC App - file locations

  > Open creative cloud App (Image below)

  

  > Right click on it (gear, drop-down) (Image below)

  

  > Select and click on 'Preferences' (Image below)

  Applications TAB >-install Locatotion (F:\Programs)

  The files tab >-location of the folder (F:\)

  

  There you GO! (Image below)

  

  Useful links of video

  https://helpx.Adobe.com/creative-cloud/help/install-apps.html#download and install applications

  Download, installation, setting up

  How to properly set up the SSD as boot drive and the HARD disk as disk storage - YouTube

• Satellite L - water damage and the laptop does not light

  Hello

  I don't know if this is the right forum for this, but I was just wondering if someone could give me some advice. My brother spilled some water on my laptop 3 days ago (argh!). He immediately turned off and won't start up again. I stamped it towards the top as long as I could, removed the battery and positioned in a V shape to try to help dry. It is still not started. When I plug in the adapter, the screen remains blank, but there is a very low humming noise and the lights flash:

  The power light flashes green very clearly
  Battery green LED flashes weakly
  The hard drive LED blinks green VERY weakly

  I'm really hoping that the laptop is not dead and I'll at least be able to recover my hard drive, but it seems unlikely. I'd appreciate really any advice that anyone can give me in regard to what could be wrong or how I can fix this problem.

  Thank you for taking the time to read this.

  Hello!

  I agree with Luke and the best way is to contact you an ASP. They can check the laptop and tell exactly which parts must be Exchange or not.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  If the HARD drive is not defective, you can backup your data to another PC or laptop as Luke suggested.

  Good bye

• No battery indicator and the laptop does not shut down after closing the lid

  After returning from my lapyop return to caused by a virus factory settings I can't have my defiler of battery on my taskbar

  and also I got my lap top programmed to close on the cover but can't find where to put in place

  Hello

  I suggest you to visit the web link below to change the change the power button cover option.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-what-happens-when-you-close-your-mobile-PC-lid

  Once you have visited the link above, try the method to display the power plan options and then search forcover and the power button and choose your preferred option.

  Hope the helps of information. Please post back and we do know.

• Publisher cannot connect printer wireless Officejet 6500 has E710e and the laptop over the network

  I just changed my ISP and moved to British Telecom, who sent me a new router. The new service is in place and working well and I reconnected my Officejet 6500 a E710e CN557A to the wireless network. But I can't connect the printer to my laptop no matter what I try. I have uninstalled and reinstalled the printer on the laptop using the original CD and then updated to the latest drivers. I even reset the printer to default and then network related setting before attempting to connect the portable computer whose IP address of the printer without success. My laptop OS is Windows 7 32 bit and the printer is just over a year. He worked like a dream with the old wireless network.

  I have already downloaded on my laptop HP - HP Print and Scan Doctor diagnostic tools and troubleshooting network printer connection. Printing and scanning doctor can't see the printer and I followed the instructions of troubleshooting without success.

  Any help and advice would be much appreciated.

  If it is a BT Home Hub, they don't play well with HP wireless printers.

  You can try this - remove all instances of your printer in Control Panel > devices & Printers. Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.