DVD burning performance

Similar Questions

• My windows media player does not recognize that I have a cd/dvd burner installed how do I corredt this?

  I'm trying to burn pictures on a dvd with windows media center and I get a message saying "install a burner and try again. I have a burner and have used it in the past so I don't know what the problem

  Hello

  1. have you made changes on the computer before this problem?
  2. which version of the Windows operating system is installed on your computer?
  3. what version of Windows media center do you currently use?
  4. are you able to use the DVD writer normally with other applications?

  Try the following and see if it helps.

  Method 1:

  Make sure that the CD/DVD burner is properly connected to the computer.
  a. If you are using an external CD/DVD recorder, connect the CD/DVD burner to the computer.
  b. plug in the cabin of the power supply and check if the power light is on.
  c. install the burning software. Insert the CD, a program will pop up and you guide through the installation process. Usually it let you name your drive, tell you when connect you your external CD/DVD burner to your computer via USB, and update the software for your external CD/DVD burner.
  d. check if you are able to burn CD/DVDs.

  Method 2:

  Delete the temporary folder burn Cache and check if it helps.

  Follow the steps below:
  (a) click Start, select computer.
  (b) now go to sub lease:

  File Burn \AppData\Local\Microsoft\Windows\Burn\Temporary C:\Users\ (Username)

  (c) delete the files at the location above.
  (d) restart your computer and check if that helps.

  Method 3:

  Uninstall any third-party CD/DVD burning software installed on your computer and then burn the DVD and check if that helps.
  How to uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Method 4:

  Run the fixit for the following Microsoft fixit and if that helps.
  Your CD or DVD drive cannot read or write media: http://support.microsoft.com/mats/cd_dvd_drive_problems/

  Method 5:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See also: http://windows.microsoft.com/en-us/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Center-frequently-asked-questions

• LG supermulti dvd burner is not detected by the system.

  I wanted to install ATI RADEON HD 4350 and so I uninstalled the driver Intel (r) GMA. I installed the card on the motherboard and I have installed the driver provided by the manufacturer using their CD and I also did other necessary things. Everything worked perfectly. Then in the driver user interface, I saw two monitors. I selected one of them, without any judgement and turns off the computer. Later, when I put it on I saw there was not on my screen and indicator showed natural signal, which was red. So I uninstalled the card and connect the monitor to the onboard connector cable.

  Sometimes the HDD and LG supermulti dvd burner got detected (both or one of them) and sometimes they were not. When they were done detected the speed and performance of the machine was very poor. Monitor has also not getting detected in Device Manager.Then I managed to uninstall the video adapter driver and is also further things to slove the problem:

  Checking the SATA connections (my HDD is on the SATA1 and LG supermulti dvd burner is SATA 2), checking the other connections, Clearing RTC RAM etc, but nothing gave me a permanent solution.

  Then I did a BIOS update and I did an upgrade to Windows XP SP3, stay inside Windows and I also reinstalled driver Intel (r) GMA (new version).

  Now the problem is the drive is detected but supermulti LG dvd writer is not. But now the monitor is in my device manager and performance is good. Now what should I do to the system so that it could detect LG supermulti dvd burner?

  Two other points are:

  1. when I was using the video card my system was attacked by a Trojan horse, but now it's OK after running a full scan using KIS2011 and take necessary measures.

  2 is powered for the LG supermulti dvd burner because it is to open when I am pressing the button.

  System Specs:

  OS: Win XP SP3 x 32

  MB:Asus P5QPL-AM (it has integrated video card)

  The problem has been resolved by running a scan for hardware changes in Device Manager. I did it before but this time it worked.

• laptop DVD burner

  My laptop DVD burner doesn't work on my admin account no problem (a years) but not on my account (all inclusive) children. TI spit just the DVD of return. In preferences systems on both accounts I wrote to ask what to do with a blank DVD but it never done on the children and it does on mine.

  Thanks for any help.

  Hello lareianne,

  Welcome to the communities of Apple Support!

  I see from your post, that on behalf of your children on your iMac is not able to burn DVDs. I understand the importance of being able to burn DVDs, I have do this a lot on my iMac. I'm happy to help you with this.

  Use OS X El Capitan: set up parental controls and check the restrictions of parental control to see if burning CD and DVD is blocked, specifically, this section:

  All restrictions

  1. Choose the Apple menu > System Preferences, and then click Parental controls.

     Note: When you open parental controls Preferences, if you see the message "There is no user to manage accounts", see Add a managed user.

  2. Click on the lock icon to unlock, then enter an administrator name and password.

  3. Select a user, and then click a button at the top.

     • Applications: Prevents the child to use the built-in camera. Limit contact of the child with other people through the Game Center and Mail. Specify which applications can access the child.

     • Web: Limit access to Web sites, or allow unrestricted access.

     • Stores: Disable access to the iTunes Store and the iBook Store. Restrict access to music, movies, TV shows, apps and books to only with notation adapted to the age of the child.

     • Time: Set time limits for the days of the week, weekend and sunset.

     • Privacy: Allow the child to make changes related to privacy.

     • Others: Block using the dictation, access to the printer settings and burning CDs and DVDs. hide profanity in the dictionary and other sources. Prevents the Dock to be modified. Provide a simplified view of the Mac desktop computer.

  Best regards.

• -DVD burn does not work in the DVD player sometimes

  I have a Mac Pro from the beginning of 2008, and it came with a DVD drive (OPTIARC DVD RW AD - 7170A).  I was able to burn DVDs with using toast in the past.

  But lately, the half of the DVD burn won't play in my DVD consumer player.  I get a "Disk error" message when I try to play them, and they do not load.  It's a strange problem, because some of them work and some do not.  I can't tell where the problem is.

  Is there a way to test the DVD player?  Should I just replace it?

  Many brands of blank DVDs gives very inconsistent results when burning. If you use a brand store or generic blanks, that may be the problem.

• iDVD on the part of an external DVD burner

  The optical drive on my mac mini 2009 died. I need to burn a project to a DVD. I have attached an external DVD burner for mac. I play DVD. How to record from iDVD please?

  I had a similar set on one of my Mac mini.  My internal optical drive still works fine, but I bought an external burner because the Apple optical drive cannot burn the M-DISC.  (M DISC is what we use now.)

  http://eShop.MacSales.com/item/OWC/MR3UBDRW16/

  Don't burn your DVDs from iDVD. Instead, use iDVD to create an image file and then burn the image file using the disc utilities. Utility disk will be out and find all your drives connected and it should see externally, (he does with us).

• By Satellite Pro S300 uses double layer DVD burner

  Hello

  Sorry for my bad question, but I have a DVD burner double layer on my Satellite Pro S300?
  THX

  Hello

  Do you have your read the user manual?
  In manual mode, you will find information on the CD/DVD drives properties;

  Always is that the Satellite Pro S300 series was equipped with different CD/DVD drives
  TEAC DV-W28S and Panasonic UJ870 are readers of DVD super multi and support media Double layer + r.

  You can also find more information on the CD/DVD drives that are installed by using the Nero Burning Rom. There is an option that shows you all types of CD and DVD that is compatible with the internal SIDE

• Portege A100 - problems recognizing a new DVD burner

  Hello

  I'm looking to replace the Panasonic/Matsu * player UJDA750 combo with a LiteOn SOSW - 852S DVD burner. The LiteOn is CSEL and is not recognized by the Portege A100. I tried to change the master/slave/CSEL and Inverse CSEL using E2MS_WIN_SOSW - 852 S .exe (in an Acer Travelmate 220, which sees all configurations), but the Portege A100 still does not recognize LiteOn.

  I ran IDEDIAG using a WinME boot CD and the Matsu * a Combo drive in Portege reports as secondary master. So, I tried flashing the drive LiteOn (using the Acer Travelmate platform) with MTKFlash version 183 c using the a command? "mtkflash 3 w/b PRS9.bin" (using the original firmware of saved), '3' to change the drive to the secondary master. I came across problems here - the flash appears to hang. The drive is always ok, however. I flashed it back to the original ok CSEL using E2MS program in Acer.

  I have not tried bridging the pins 45 to 47 on the LiteOn - I thought maybe it was a last resort.
  -Can help you with the correct configuration for a CD/DVD drive in the Portege A100? There are a bunch of different ones - primary, secondary, tertiary, Quarternary master/slave and CSEL and Inverse CSEL. Portege A100 'sees' the Matsu * a CDROM model CR-176_B of Acer.

  Or - can you recommend me a DVD burner for this laptop?

  Hello

  The evolution of the master/slave/c-salt settings is not recommended and tell the truth I put t know if its possible. I presume that it of not possible to Flash these settings on medium power.
  In my opinion it doesn't make any sense to do.
  This procedure may damage the drive. Maybe you will not be able to use this drive more and more you will void the warranty!

  I think it s better to buy a compatible device and supported as trying to drive not compatible flash.

  Did you check your user manual? Usually the user manual should provide information on compatible CD/DVD players and supported.

  Good bye

• Satellite P100 - DVD burner and reader of SD card not recognized by Vista

  Hello everyone,

  I have improved my P100 of Xp to Vista and I can't make my DVD burner and my reder of SD (embeded to the laptop of course!) work.

  I can read CDs or DVDs, but I can't burn a DVD.
  My SD card reader in my device list but not appear in my browser!

  Even more, a 'mass storage' appears as not porperly installed but I have no reference on which device refer to the. Not to mention, I tried several times to install the utilities on the site Web of Toshiba sd but it didn't change anything...

  What laptop Satellite P100-xxx you have exactly?
  The number of extensions and model number would be very useful for further study

  Anyway. to get the card SD works in most cases you need to install the Flash Media driver
  In addition, it would be very interesting to know what SD card do you use.

  With regard to the Vista DVD burning issue;
  How have you tried to burn the DVD? Did you use special software to burn like Nero for example?
  Have you used different DVDs from different manufacturers of DVD?

  From my experience, it would be possible that the player manages all DVD. You try different DVD from different manufacturers. I had a good experience with TDKs

• HP ENVY 17-R102NL: dvd burner double layer HP ENVY 17-R102NL

  Hello

  I would like to know what kind of burner is installed in HP ENVY 17 - R102NL laptop computer?

  What is the burner model number?

  It is a DVD burner double layer RW-/ + or not? or another type?

  Thank you

  From the Manual:

  Fixed optical drive, Series SATA, DVD +/-RW Double layer SuperMulti Supports zero power optical drive Supports M-drive 9.5 mm tray loading

  Optical drive DVD +/-RW Double layer SuperMulti 813784-001

  So yes, it will read and burn supports double layer.

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Portege R700 - slow DVD burning

  all of a sudden for some reason any CD/DVD burn on my new Portege R700 has almost ground to stop. It worked fine initially, but now won't have high peaks of 1 MB/sec... it is a REAL pain...

  The problem occurs with both the DVD player built-in and a USB connected drive that has worked well for years, so there must be a problem with o/s or H/S any. am about to update the BIOS but with no real hope

  I did some research on Google and things seem to point to the IDE controller issues. I took some advice and remove / reinstall the controller, but to no avail...

  someone else has the same problem - or, more importantly, a solution please?

  in some desparation

  Tim

  Hello

  not easy to say why it is burning so slow. have you tried burning with other discs and programs?

• Satellite L10 - 114 - it has a DVD burner?

  My laptop has a DVD burner on board. I know he'll make the CDs, but it will make the DVD.

  [Edited by: admin August 6 05 16:38]

  Hello

  You must have a DVD Super Multi drive, which can read and write all DVD, DVD +/-R/RW and DVD-RAM.

  Good bye

• S good for Satellite 1400-253 DVD burner need

  Could someone give me the part number for the Toshiba dvd writer/burner
  or offer any compatible dvd burner to fit one

  Computer portable satellite 1400-253 s (ide connection)

  Thank you

  Satellite 1400 is old model of laptop and it comes with several different optical disk drives, but none of them was DVD burner. Currently, these discs were not available.
  Due to this fact, you will not be able to find info on compatibility.

  If you need the list of compatible readers let us know but none of them is DVD burner.

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• What external DVD burner would work with Toshiba LX830?

  Try connecting an external DVD burner for Toshiba LX830 via USB.
  Nothing won't work - I've tried 3 writers and different software.

  Is it important that all writers are USB 2.0 and the 830 is USB 3.0?
  The best I have is 3%, then it's just sitting there.

  Can anyone recommend an external recorder that will work with the 830?

  Hello

  Have you tried to connect this external hard drive to CD/DVD to all available USB ports?

  As far as I know the Toshiba LX830 all in a computer supports 6 USB ports and two USB ports support high-speed USB 3.0 standard.

  So, even if the external USB ODD (optical disc) would not support USB 3.0, it should work in 4 other ports USB 2.0