DVD but no key

Similar Questions

• I found an old vista home basic dvd with a key, how can check whether key works but not install it?

  I found an old vista home basic dvd with a key, how can check whether key works, but not install it? some dvd install can be live boot from themselves too [password required for a direct start?]?

  Hello

  You must install it to see if it is legal to do so.

  There is no public database of product keys.

  See you soon.

• Portege R700 - no autorun for CD/DVD and USB keys

  In my Portege R700 there is no way to make autorun works (for key USB and CD/DVD as well). CD/DVD and USB keys work perfectely, but not the autorun.

  I tried to use both the automatic repair of Microsoft and PowerToys, but the problem that it is still there. I also tried to change the registry, but it seems that the changes are not retained. I suspect that it is something related to some utilities or so.
  Can someone help me?

  Thanks in advance.
  Gerlando

  Hey,.

  > I suspect that it is something related to some utilities or so.
  What utilities you have installed? Theoretically, they could block the autorun

  Normally if autorun doesn t work on XP, you can enable it in the Windows registry:
  Start > run > regedit

  The registry editor will open and go to:
  HKEY_CURRENT_USER / Software / Microsoft / Windows / CurrentVersion / policies / Explorer
  Double-click the NoDriveTypeAutoRun value and set the value of 91.

  Now he must navigate to:
  HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Services / Cdrom

  Double-click the AutoRun value and set the value to 1.

  Now restart your computer and try it again, usually autorun should work again.
  Additionally, make sure that the latest Service Pack is installed for XP (SP3).

• DVD - RW DVR-K17LF for the Satellite series does not read DVD but only to CD

  Hello

  I have a serious problem with my DVD player.
  He stopped to work. I mean, he's not reading CD but not DVD discs.
  I don't know what the problem is.

  I went on the internet and found no solution.

  Please help me.
  It is not a software problem, because my laptop does not start the DVD, but due to the CD...

  Hello

  The issue could be linked to the anomaly of the player's laser lens.
  Maybe the lens can not handle the DVD because of a physical constraint.
  In most cases, the lens can not calibrate properly and therefore different media would not work.
  In this case there is not much to do in most of the cases that the drive needs to be replaced.

  But maybe you could try to clean the drive s laser lens using a cleaning professional who could be bought from the other computer dealers.
  I don't very well if this will help but it s worth to try m

  PS: Try this:
  Remove the drive from Device Manager, access the registry and remove the filters top and bottom of this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the laptop and check the functionality of s by car.

• my computer laptop acer aspire 4736 doesn't detect DVD but the CD is very well undetected by Optiarc DVD RW AD-7580 s

  MY LAPTOP ACER ASPIRE 4736 BOUGHT A YEAR AGO. NOW MY LAPTOP DOES NOT DETECT ANY TYPE OF DVD BUT IT DETECT CD FINE. DVD ROM DRIVER IS OPTIARC DVD RW +-AD-7580 S

  I DID THE FOLLOWING: -.

  (A) TO UNINSTALL AND REINSTALL THE DRIVER FROM THE DEVICE MANAGER

  (B) CLEANING LENS

  (C) NO. UPPERCASE / LOWERCASE KEY FOUND IN H_KEY

  PLESE HELP

  Most optical drives have separate lasers for CD and DVD.  It seems that if the laser for the DVD part is defective.

• ATAPI DVD A DH16AYH ATA Device read DVD but not CD

  Engraver of CD/DVD in Compaq Presario 5010NX w / VistaBasic read any DVD but has problems with CD if I insert a music CD, sometimes it will open right and I can play music. Most of the time he just tells me to "insert a disc", usually open the status bar, but not always. If I close the drawer [or eject and close the tray] from 3 to 15 times, he finally opens the CD. Generally. Sometimes I drop and open it on my old computer Millennium, [which never fails to open the CD].  I bought a cleaning disc, but it still happens. Also, it stopped opening the tray with the manual key (1,200 works tent) and will always open with 'Eject' of the computer, but only with DVD and sometimes will open with the "eject" computer with the CD never if it is empty, so I always keep a known disc "opener" in the status bar. (if I forgot, I use a paper clip)

  I did an online search of the Device Manager for a driver update and he told me that the best software is already installed. I just need a new burner? Why is - that it will work with DVD CD not? driving me crazy. Thank you ps can not find a burner mfgr. says simply "drive SuperMulti DVD with Lightscribe" - pps I tried uninstalling the Device Manager, and then restart the computer - no change.  Haven't tried the support.microsoft.com/gp/cd_dvd_drive_problems diagnostic program no solution I came across a post from someone else who had the same problem [former position & 'uninstall & reboot' was the only suggestion on this one.]   I can't believe that it could be physical burner... why he wouldn't hesitate to read the DVD if it was a physical problem?  Help?

  Hello

  Check with Compaq Support, their drivers and documentation online and apply to the
  HP forums for known issues. Compaq can give you more information on the disk.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/

  ==================================================================

  Readers to use and this intermittent problem can be caused by wear.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• AutoPlay works for CD/DVD, but no USB or memory card reader

  My autoplay works for CDs and DVDs, but stopped working for my USB key and installed memory card reader. I tried to disable the AutoPlay and turning power on and which did not work, I also tried the commandnet start shellhwdetection , and he says that the requested service has already begun , there is nothing in the devices that connect to the box in the AutoPlay settings box

  Reading auto/AutoRun not working do not or not missing not open in Windows Vista

  http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  I hope I could help

• I lost my CD of vista window. but his key... is there anyway I can download it install it n

  I lost my CD of vista window. but his key... is there anyway I can download it install it n

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• DVD/CD drive will read DVD but not CD

  My DVD player plays DVD but not CD.  Whenever I try to play a CD, the player is a kind of hum noise.  Finally, the Player opens and a popup tells me to insert a disc.

  I tried a system restore and the automated Microsoft fixit tool.  Nothing has worked.

  I use Vista Ultimate.

  Any ideas?  Thank you.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD drive won't burn dvd or read burned dvd but will play store bought dvd

  TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

  Hello

  Have you tried to close all programs and then insert the disc in the drive?

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
  However, it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• haven't bought an adobe photoshop elements DVD but they have no insert DVD in my computer. Is there another way to install?

  haven't bought an adobe photoshop elements DVD but they have no insert DVD in my computer. Is there another way to install?

  Copy the DVD to a USB key (on another computer) and install on your computer.

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• Satellite M30: Mat * a UJ - 820 s read DVD but not CD

  I have a Toshiba Satellite M30 and I have problems with my carpet * CD/DVD UJ - 820 s player.

  I had to do a full restore due to a virus problem, and now the reader can not read any CDs.
  I can read movies DVD and load/use of programs to DVD but when I try to use any media CD (load programs, play music CD, burned CD playback) it gives me the error "D:\ is not accessible. Incorrect function. »

  I looked on the forums and have tried to remove the drive from the hardware Manager, tried to change control of the IDE and have downloaded the latest orders that I could find.

  Any help please!

  Hello

  tried a Firmwareupdate for the reader? At this address you can get the latest update if it is not already:

  http://Forum.RPC1.org/dl_firmware.php?category=15&manufactor=18

  So if the problem persists, then your only option would be to contact a local service partner. They will probably check your disk for physical errors.

  Welcome them

• Satellite A100 PSAA9A - can read DVD BUT not CD with Windows XP

  I use a satellite A100 PSAA9A computer laptop and I started having trouble with the CD/DVD drive. It was working fine until yesterday when he decided not read no matter what CD I get the message asking me to insert a disc, when there is a CD in the drive. It still reads DVD good.
  I don't know if he has anything to do with the download of the updates of Windows XP because the troubl seems to start after I did.
  Is there somewhere in the creation for the player who controls this? Also when I run the troubleshooting test it always ignores the test of this drive.
  I'd appreciate any help.
  See you soon

  Optical drives, DVDS, has some different faces to work with CD and DVD, but objective and optics are the same. He had arrived, when in one two heads become a dust or something else. I thing that you must visit the Service and your disk cleanup. But do not use a cleaning disc!
  PS. Windows updates, as and OS, are not issues.
  Make sure it's easy - attempt to start bootCD (not BootDVD) with anyone by pressing F12 at startup. If the running machine - it's Windows, if not - DVD player.
  See you soon

• Satellite A30 won't read dvd but will read a cd/cd rom

  I have problems with my satellite A30/dvd/cdrw drive (TEAC DW-224th-A), it will not read DVDs but will play CDs and cd rom drive will turn looking for the dvd but it won't find it and when I try to start the dvd menu from my computer it says the empty disks.

  I checked that the drive is enabled and it is said that the drive works properly. I also tried DVD originals and copies

  It works fine but stopped all of a sudden,

  Has anyone advice please!

  Hello

  Try to remove the drive from Device Manager.
  After phone restart the operating system should recognize the drive again.
  Maybe it helps.