Dvd/cd drive Inspiron 6400 does not not with my computer, etc.

Similar Questions

• DVD-ROM drive works, but does not appear in 'Computer' and discs can be played

  I totally messed up my DVD - ROM drive. After graduating the famous blue screen of death once yesterday and once today, I thought that my PC settings reset would fix the problem. Then, I pressed F2 when my computer starts and resets all settings. Unforunately, this is something serious to my DVD - ROM drive. Initially, it did not work, so I opened my computer and somehow got it works. But now, it does not detect the disks I insert in there. I get the message "no DVD - ROM drive found."

  Anyone know if it's fixable? I hope I don't have to take my computer somewhere for repair. Unforunately, I don't know the make or model of the hard drive. My the PC features that I think are important are listed below.

  I watch this thread, so if I'm on my PC I will be notified by email of responses.

  Characteristics of the computer:

  Model: Dell Dimension E520
  OS: Windows Vista Home Premium (32 bit)
  Video card: ATI Radeon HD 2400 PRO

  Message edited by Jesant13 on 27/06/2008 20:47
  
  

• USB ports, CD/DVD player, and Mike just does not work

  So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

  Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• Hard drive replacement, windows support, media does not support this computer?

  Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

  My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank

• I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc.

  I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc. I'm on OS 10.6.8

  The requirements for the SuperDrive Apple USB are:

  The system configuration required

  Compatible with the following computers:

  MacBook Pro with the Retina display

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  I manual installation, it currently seems to be so many downloads, I might switch to automatic installation but I don't want to start the download service Pack2 because it could take forever and I have it on disk.
  Please notify
  Graham

  Hi Graham,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• Inspiron 3737 does not start?

  Hello.

  Can Inspiron 3737 does not start. See the following video.

  Can you tell what happened to him?
  Computer configuration laptop manufacturer is unchanged.
  At first it was a problem some time and he started to run after 2-3 commissioning. The number of switches required for a departure then become higher. Now it does not start at all.

  Hello.

  I got sick.

  Here's the video I mentioned

  www.YouTube.com/watch

  Please help me to identify the problem.

• Inspiron 620 does not illuminate

  I have a 620 Inspiron, that does not illuminate.  Green light outside lights when the computer is plugged in but there is no light lit on the motherboard, or elsewhere in the Interior.

  Is it a question of power power or a motherboard problem?

  Thank you

  The YELLOW LED on the CHIP (on the motherboard) must light up when the machine is connected, and the green light on the back indicates AC power.  You have a DEAD power supply.

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• Added raw lun mapped as a new hard drive, but VM does not see it.

  ESX 4.0 with two Windows Server 2008 virtual computer running.

  Created with SAN volumes and put at the disposal of the ESX host.

  I went in with my client vSphere virtual machine settings and added a new hard drive > mapped raw lun, stored with VM, physical and everything seems to set up correctly after hitting good. I also increased the size of the other two disks on this virtual machine. I rebooted the VM and connected to the server to find that he does not see the new drive, or he does not see the new size increases for other readers. I rebooted the host and yet, nothing new.

  What have I done wrong? Why these changes are not recognized by the virtual machine?

  After the increase in the size of disk or adding new disks, you must go the the VM Windows disk management and resize or format/partition/boot disks.

  André

• WinXP Pro 2008 does not recognize my computer drivers & load the standard drivers 2001

  WinXP Pro 2008 does not recognize my computer drivers & load the drivers of standard system of 2001; Impossible to upgrade

  then load systemroot, I don't want systemroot, also charges 3.1 drivers, 95, 98. 2000 & winnt 3, 4, 5 &

  Sometimes it runs under DOS only & sometimes not

  I don't want to network & sharing, because there's someone attached to my system & load malware {pirate just deleted} & takes control so I'm at work & then interupts me online with flash & js causing anomalies onscreen, resumes also connection & homepage.

  Now my Norton is denied access (& other programs) & I can't use it

  Suffered disc & reworked several times, I tried the sharding & partitioning is not on all COMPUTERS

  This pirate has done this for 12 years, 7 computers & 5 operating systems.

  SOMETIMES HE TAKES CONTROL OF MOUSE & KEYBORD. YOU SHOULD SEE MY CDROM CONTROL CD ABNORMALLY.

  This is clearly abuse & I am at my wits end! Help me get rid of this danger, please

  but hidden.
  Try this, go to disk management (Control Panel, administrative tools, computer management).
  They appear here? If so, you may need to reassign a drive letter for them.

  If not, look in Device Manager, they appear in red/yellow or is there any "unknown devices"?

  Windows cannot have the drivers either, so you can download the drivers from the manufacturers Web site.

  1. start the computer.
  2. press F8 repeatedly to display the start menu.
  3. Select safe mode in the start menu.
  4. right - click on "my computer".
  5. Select Properties.
  6 select the Hardware tab.
  7. click on the button "Device Manager."
  8. click on the (+) plus sign next to CD/DVD players.
  9. right click on each component and select uninstall
  10. follow steps 9 to all components under this category.
  11. restart the computer.

  It must reload the drivers for the CD/DVD drive.
  or

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00619385&LC=en&cc=us

  check on this site how to connect dvd cd players

  I tried the following to help resolve the problem:
  1 attached Mouse, provided power but does not recognize the device. Assistant add hardware does not yet come upward.
  2. 3 readers USB flash, in every port and they were not recognized or attached.
  3 uninstall all devices of USB root hub and rebooted. No change.
  4 uninstalled all the USB controllers and restarted. No change.
  5 install a logitech mouse driver that is the same as the mouse installed. The mouse has not always recognized.
  6 re-flashed the BIOS. No change
  7. utility of diagnosis of Dell Ran and no problem found with the controllers or the USB ports