DVD/cd/rom won't recognize any kind of disc vista home prem 64

Similar Questions

• DVD Rom won't recognize there is a disc in the drive

  My uncle gave me his old computer for Christmas. Before it was given to me it was sent for a tech restore the computer to factory setting. I think that they wrote zeros to the hard drive and started it completely.

  I used a few weeks after I had put the computer because I had installed something that did not work, System Restore. I had not won it first, but always ended up doing a system retore to when the computer is first restarted.

  Now my DVD Rom will not notice when a disc is in.  Him sometimes turns on, but the computer does not appear there in a disk. I looked in my computer and the CD drive is listed as empty.  Even when I try to play a DVD. The drive appears in the list player however.

  Any idea what I could have done wrong or how to fix this problem?

  Thank you.

  LisaAC salvation,

  · What is the service pack installed on your computer?

  · What is the number and the model of the computer?

  Follow the steps listed in the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer won't recognize any of my devices from CD or dvd

  My computer won't recognize any of my devices CD or dvd, including integrated both. My sony makes noise when I unplug and plug it so I don't know that it connected.

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• My DVD - RW drive won't read any discs of all kinds

  Original title: Please help me with my cd/dvd!

  I have a laptop HP Compaq 6735 s with a Xp Sp3 system and I have problems with the Sony optiarc DvdRw AD7561S dvd, he doesn't read any type of disc (Cd and DvD new or original or burned), anyone have a suggestion for me please?

  Hi FabrizioBazzani,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• My dvd/cd burner won't recognize when I insert a disc. I use cd - r and try to do a picture disc. When I select burn it asks me to insert a disc, but I already have one inserted.

  When I try to burn a disc burner image will not recognize that I have a disc inserted and it asks me to insert a disc.

  This issue would have occurred after you installed, uninstalled or updated a program or Windows Vista.
  You can open the link http://support.microsoft.com/kb/314060 click the FIXIT button that should help you.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  I hope that this problem could be solved soon!

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think

• CD ROM does not recognize any CD, all get ejected in Vista

  I continue to put a cd to burn some files on it and it keeps ejecting.  I tried different and also a game CD.  It happens to all of them help

  The disc is damaged and must be replaced. MS - MVP - Elephant Boy computers - don't panic!

• How to add the DVD RW drive in the Menu "send to" in Windows Vista Home Premium

  "I can't copy a document or an image on a DVD or CD because the ' send to ' ' menu does not have any CD or DVD drive.

  No guarantee... but the following article may be worth a visit:

  The CD drive or the DVD drive is missing from the shortcut menu "send to".
  and in the tab property by car after you erase a disc on
  a computer that is running Windows Vista SP2 or Windows Server 2008 SP2
  http://support.Microsoft.com/kb/974913/en-us

  FWIW... it may be worth trying to add a shortcut to DVD - RW drive
  in your folder "send to."

  See the following link:

  Customize the Windows 7 or Vista send to Menu
  http://www.howtogeek.com/HOWTO/Windows-Vista/customize-the-Windows-Vista-send-to-menu/

  To create the shortcut... go to... Start / computer... right click
  the drive letter of your DVD - RW drive, and then in the menu
  Choose "create shortcut". The shortcut will probably
  sent to your desktop. By dragging the shortcut to your ' send
  To ' file should add the disc menu.

  Good luck...

• I get an error to the Windows Update_8007371C "WindowsUpdate_dt000". This is the first time an update has failed. Any suggestions? Using Vista Home Premium

  This is a description of the update:

  A security update cumulative for Internet Explorer 9 for Windows Vista (KB2530548)

  Download size: 9.7 MB

  Make a return of your files and try the repair install. You should not lose any of your files, but to be on the right side (just in case), back first.

  As you say SFC found files that needed to be fixed but could not.

  06/17 / 1108:00: 21 am

• Satellite Toshiba SA60-742, DVD - RW rom cannot burn DVDs

  The DVD - RW rom don't recognize any blank DVD (it asks to insert media, but the DVD is already inside).
  I can read CDs and DVDs (with movies), but I can write just CD. Where is the problem.

  Post edited by: clara_anghel

  Hello

  What type of DVD you want to burn? DVD-R or DVD + R?

  DVD + R are not supported by your player. I found the following list what speed and media your Player supports:

  Maximum speed
  Read
  CD-ROM, CD - R 24xMax
  CD - RW 12xMax
  DVD-ROM 8xMax
  DVD - R, DVD - RW 4xMax
  DVD - RAM N/A

  To write
  CD - R 16xMax
  CD - RW 4xMax
  HS CD - RW 10xMax
  DVD - R 2 x
  DVD - RW 1 x

  Rudi Bye

• Satellite M40X-116 - drive does not recognize any CD or DVD

  Hi all!

  I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
  Please I need your help as soon as POSSIBLE.
  If you know what could be the problem, please, just send an e-mail to [email protected]
  Thank you all for the cooperation
  Best regards
  Marian - Romania

  Hello

  to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

  Good bye

• Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello
  Try this:
  http://support.Microsoft.com/kb/306318
  b Eddie

• Satellite S1800-750 - DVD ROM Drive doesn't recognize any CD or DVD

  Hello together,

  I have the following problem:

  In my DVD ROM drive are recognized any CD or DVD.

  But not fundamentally CD or DVD sometimes separate that sometimes the other!

  Where is that which can do here?

  Should I change the DVD ROM drive?

  Help me please!

  JMK!

  Hello JMK

  Can you please be more specific? You have this problem with the original media, self created or if you want to burn own media?

  As far as I know this unit is 4 years old and it is really possible that laser calibration don t work much more and it can happen that in short time you will not be able to use the DVD at all.

• Equium A60-199 is not play or recognize any type of cd or dvd

  Hi all

  It's the first time I was in the unfortunate duty position post one problem-normally I can find a solution here and just fix it myself!
  I have an a60-199 on windows XP Home Edition. It is about 18 months and unfortunately out of warranty. The issue I'm having is that the cd rom drive (a carpet * s uj-830) is not play or recognize any type of cd or dvd. Finally, I used about a week ago and have tried resetting the system to forward, then nothing works.

  I also tried the suggestion of microsoft to change IDE transfer parameters, and that no longer works. When I put a disk in it turns three times and the light on the cd drive flashes, but he can't find anything, and I get the message ' d: / is not accessible. the request could not be performed because of an i/o error "I also websearched that but found nothing else than the suggestions above that has not worked."

  Is it possible that the link between the motherboard and cd rom to be broken yet light and spinning cd happen? I am completely confused and would like to have suggestions from anyone!

  Thanks in advance,
  Fyldelass.

  Hello

  Don't reset the system how you used recovery media to set to factory settings? If so, I think that there must be a hardware malfunction. The drive has power and I think that the problem is not connection but damaged drive.

  The drive is original and also compatible with this unit. The assignment of pins is just. Before trying anything, you can try to remove the disc and check the contacts. Maybe they should be cleaned. If nothing helps, I presume that the replacement should be performed.

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• Satellite A30 CDRW DVDRW (Mat * one) drive cannot recognize any dvd

  Hello!
  I am owner of a Satellite A30-303 with an optical drive MAST * A UJ811 (CD-RW-DVD-RW).
  Everything works perfectly until last week the player ceased to play any DVD. Appears in an error message saying that there is a problem with E/S. CDs are recognized without problems however.
  I tried to find any updated drivers for the DVD driver but I just could not.
  Please someone have an idea of what this might be and how to solve?
  Thank you!!
  Alex

  Hello

  On this path it is always not simply to say what may be the problem. As written littco check if there is some virus or any kind of malware. It is also possible that there is a technical problem and the reader can not calibrate on the right track.

  I put really know what you mean with E/S, but you can try to remove the device from Device Manager, and then restart the device. The last thing you can try is to reinstall the unit using the recovery CD. On this way, the unit will be absolutely clean. If the problem persists, obviously there is a malfunction and the drive needs to be replaced.

  By the way; have the same opinion as littco.

  Good bye