DVD/CD writer problem: error code 19

Similar Questions

• How can I correct I tunes problem = error code 42404?

  How can I correct I tunes problem = error code 42404?

  How can I correct I tunes problem = error code 42404?

  Post in the forums of Apple iTunes?

  Otherwise - use something like Revo Uninstaller (trial version) to make a more aggressive removal of ALL Apple software.  Reset.  Install the latest version of the web page.

• Optiarc dvd rw ad-7591 error code s 19?

  I get this error code, when I check the device drivers, it says that they are up-to-date.  Anyone know what is happening here?

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• DVD player not recognized; error code 10

  Our Museum has a Dell Optiplex 745 on which the XP operating system has been replaced by Windows 7 Professional.  The DVD drive is not recognized, and the error code 10 stipulates that the driver could not be loaded.  I tried upgrading the driver online, but I was told that the driver installed is the right one for this player.  If I remove the drive with the machine on, uninstall the driver, stop and then restart and then restarting to reinsert the DVD, the computer recognizes the drive and install it and it works.  When you restart the computer the next morning, the car disappeared again.  Would appreciate any help I can get!

  Thank you!

  Werner Horlbeck

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Equium L40-156: graphics card problem - error code 12 in Device Manager

  People of the night...

  Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).

  Tried the drivers that I had with the installer
  Tried the drivers from the toshiba download page
  Tried the drivers on the Microsoft Update site
  Tried the drivers from the website of intel

  All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.

  Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
  Display settings do not display a connected device, DXDIAG had no idea either.

  Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere

  Any suggestions, greatly appriciated

  Ta

  Hello

  I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.

  ------------------------------------
  + Error code 12 +.

  + This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.

  + Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
  -------------------------------------

  Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
  I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
  You can use the Toshiba Recovery CD/DVD of restoration!

  All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.

  Check this box and report if the same error is displayed on the laptop with the factory settings!

  Good bye

• Photos from a display problem error code 0 x 80010108 CD-rom

  original title: display of pictures from a CD problem

  I tried to use Windows Photo Viewer to display photographs on a CD-ROM. CD was created in Roxio. When I tried to view the pictures I got this error message. "Error preventing photos or videos of bieng displays error code 0 x 80010108' what is wrong and what should I do to fix this?

  Hello

  1. what version of Windows is installed on your computer?

  2. have you made any recent hardware or exchange of software on your computer before this problem?

  As you use Windows Photo Viewer, copy the images to your computer and then try to view the images.
   

  Please follow the steps and links, if you use Windows Live Photo Gallery:

  Method 1:

  1. close Windows Live Photo Gallery,
  2. click on Start.
  3. click on my computer/computer,
  4 paste this address in the %userprofile%\Local Settings\Application Data\Microsoft\Windows Live Photo Gallery address field
  5. right click Pictures.pd5
  6. click on Rename
  7. to change the name of the file to OLD_Pictures.pd5
  8. open Windows Live Photo Gallery

  Now, Windows Live Photo Gallery will rebuild its database, which should stop the error you receive does not happen.

  Method 2:

  Fixed problems with Windows Live Photo Gallery that does not:

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  If the problem is not resolved, you can post your questions in the link below: http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail

  I hope this helps.

• Installing LabVIEW 8.5 DVD base sends an error Code-12 on Windows 7

  Hello

  I try to install NI Site license fall 2007 (DVD of LabVIEW 8.5 Core) on Windows 7, but I get the error message following the installer when you start the installation:

  *********************************************
  Windows SDK function has returned an error (error code-12)
  End of error report.
  *********************************************

  Can you please help in this regard?

  Thanks in advance.

  Javed

  As for me, I managed to install academic Site license fall 2007 LabVIEW 8.5 Core DVD on Windows 7 by running the installation of all modules files (LabVIEW, LabVIEW System Identification, LabVIEW Control Design and Simulation, etc.) separately, instead of running to the main installation DVD.

• my cd/dvd drive is corrupt error code 39. My computer is vista syatem. I can't download any software. Help, please

  Hello please help retorw my Cd / Dvd drive because it is corrupt and the error code is 39. Now, I can not download any software from a disc. What should I do?

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/driver-is-missing-or-corrupted-error-code-39-USB/6aeba33e-07fb-446e-9602-2fcc4b8103a9

  It will be useful.

• help solve the problem: error code 646 when trying to install updates

  I get an error code every time I try to install 3 updates inportant code is 646

  Here is an article with a fix for updates, get the error code 646 (mainly Office updates):http://support.microsoft.com/kb/2258121.

  If this does not work, try the Windows Update Agent to:http://support.microsoft.com/kb/949104/.

  If that still does not help, please repost your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Window update problem (error Code: 80246008)

  I recently tried to run Windows Update only for it to face an unknown error only by giving the error code 80246008. This also seems to affect windows defender which would not be up-to-date and Games for Windows Live that would not download (error code: 80080005).

  After a lot of Googling the error code apprently (BITS) Background Intelligent Transfer Service does not work properly. When I try to manually start service (all under administrator privileges), he stops and begins to give this message:

  "The service Service on Local computer Background Intelligent Transfer began and stopped. Some services stop automatically if they are not in use by other services or programs. »

  Then I downloaded the repair tool BITS (Windows6 0-KB940520 - x 86 - ENU) and ran to try to repair but it states:
  "Background Intelligent Transfer Service (BITS) repair is unnecessary at present."

  I then tried to run Microsoft Fix It, in normal and aggressive mode, and it gets stuck and gives this error message:
  "Service"Background Intelligent Transfer Service"(BITS) was able to start. Check that you have sufficient privileges to start system services. »

  My version of Windows is Windows Vista Home Premium (Service Pack 2). Thanks for any help you can offer in this area.

  After looking at at least 20 different threads through the internet about this problem, my problem showed no evidence of a malware issue fixable (something to do with the malware by changing a registry key for % SystemRoot % and % fystemroot %), or due to other corrections mentioned work. In the end I had to do this that most of the threads, I have finally places frequent, all re - install windows.

  Thanks for your help anyway man.

• Windows update KB 2686509 security installation problem (error code is 0X8007F0F4)

  original title: I'm having a problem installing to a KB 2686509 windows security update.  The update downloads but continues to do not settle.  The error code is 0X8007F0F4.  What can I do to solve to partition?

  This installation has "failed" to install several times.  I keep getting the security shield on the toolbar.

  Hello

  I suggest you follow the steps listed in this article and check if this may help.

  http://support.Microsoft.com/kb/958051

• Windows Update problems, error code: 0x802440oA

  I try to do the Windows updates to my XP pc and when I hit the express button it starts then stops and gives me an error code: 0x802440oA and custom allow updates. I had to do a complete restore of the system on my pc and need all the updates. Please help me with this problem!

  I try to do the Windows updates to my XP pc and when I hit the express button it starts then stops and gives me an error code: 0x802440oA and custom allow updates. I had to do a complete restore of the system on my pc and need all the updates. Please help me with this problem!

  Have you installed the Service Packs again?

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now try to get updates.

• sysstem backup problem error code 0 x 80041321

  Attempt to perform a copy backup on an external hard drive.  When we do the error code appears immediately.

  Hello

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Cannot burn DVD get a 0XC0AA0301 error code

  OT: 0XC0AA0301 error code

  I get an 0XC0AA0301 error code when burning DVDs... Windows7

  Hi mr.mubark,

  I suggest updating the firmware of the player by downloading the latest version from the manufacturer and installation.

  You can also update the chipset drivers for the PC from the manufacturers Web site.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SD card problem - error code 0 x 80070570

  I bought a new sd card! I connect the sd card to your pc to transfer files. The sd card is 32 GB micro sdhc class 10. and the android phone is alcatel pop. c9, but the problem is not with the alcatel but with the sd card or the pc! at the beginning I normally load sd card photos, videos and files. but then is approximately, it shows a messagage error code 80070570 0 x and then the sd card does not work normally because it seems that some files and the names of folders as Chinese letters and his strange also because the report has large capacity (sometimes 70 GB said on this weird folder properties). This happens only when I transfer files from pc to card a few minutes!

  1. I format the card several times, I even tried to fat32, as ntfs, also through the format of phone Android, but nothing has changed.
  2. antivirus different i three Runic (each separated from each other), but there is no virus in the sd card!
  3. I also tried defrag on the sd card.
  4. I also tried through windows 7 error checking.
  5. I also tried to format it to Go lower, for example at the maximum capacity of 20 GB.

  None of the above worked. I am so disappointed and I don't know what else to do.

  Please, help me!

  Thank you in advance,

  John

  

  at this point, no matter what choice I'll click (I want to say, cancel, retry, skip), the result is the following photos:

  

  

  Hello

   
  Thanks for the update on the issue. I appreciate your efforts to solve this issue.
   

  Unfortunately there is no such Microsoft Software to the task that you have requested. However, you can search on your favorite search engine for such a tool that can do the task for you.

  In addition to this, I suggest you replace the SD card because there could be problems with the card. You can contact the SD card hardware support team for assistance.

   
  Hope this information was useful. In addition to this, feel free to answer in the case where you are facing in the future other problems with Windows. We will be happy to help you again.