Optiarc dvd rw ad-7591 error code s 19?
I get this error code, when I check the device drivers, it says that they are up-to-date. Anyone know what is happening here?
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Tags: Windows
Similar Questions
-
Installing LabVIEW 8.5 DVD base sends an error Code-12 on Windows 7
Hello
I try to install NI Site license fall 2007 (DVD of LabVIEW 8.5 Core) on Windows 7, but I get the error message following the installer when you start the installation:
*********************************************
Windows SDK function has returned an error (error code-12)
End of error report.
*********************************************Can you please help in this regard?
Thanks in advance.
Javed
As for me, I managed to install academic Site license fall 2007 LabVIEW 8.5 Core DVD on Windows 7 by running the installation of all modules files (LabVIEW, LabVIEW System Identification, LabVIEW Control Design and Simulation, etc.) separately, instead of running to the main installation DVD.
-
Hello please help retorw my Cd / Dvd drive because it is corrupt and the error code is 39. Now, I can not download any software from a disc. What should I do?
Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
-
Cannot burn DVD get a 0XC0AA0301 error code
OT: 0XC0AA0301 error code
I get an 0XC0AA0301 error code when burning DVDs... Windows7
Hi mr.mubark,
I suggest updating the firmware of the player by downloading the latest version from the manufacturer and installation.
You can also update the chipset drivers for the PC from the manufacturers Web site.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
DVD/CD writer problem: error code 19
When troubleshooting DVD Burner CDDDVW H653R returns 19 scsi error code, is there a fix
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
These however is a possibility depending on which and how many you have installed.-------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
DVD player not recognized; error code 10
Our Museum has a Dell Optiplex 745 on which the XP operating system has been replaced by Windows 7 Professional. The DVD drive is not recognized, and the error code 10 stipulates that the driver could not be loaded. I tried upgrading the driver online, but I was told that the driver installed is the right one for this player. If I remove the drive with the machine on, uninstall the driver, stop and then restart and then restarting to reinsert the DVD, the computer recognizes the drive and install it and it works. When you restart the computer the next morning, the car disappeared again. Would appreciate any help I can get!
Thank you!
Werner Horlbeck
Hello
Read this link which has also a few solutions:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/--------------------------------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
HL-dt-st-dvd +-rw gt80n registry error code 19
My DVD HL - DT - ST DVD + - RW GT80N to Inspiron 17R has suddenly stopped working - Windows8/64 bit troubleshooting could not solve the problem with the driver. I have uninstalled and installed the driver but still receive the error: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». DVD ROM is not recognized by Windows Explorer by Total Commander, or any other application except the Windows Device Manager. The thing with "UpperFilters" and "LowerFilters" in regedit did not work as well.
ITunes is much longer intalled so I don't think that's the problem.
Need help please, I don't know what to do.Hi, I've recently upgraded to Win 10. Now my GT80N HL-DT-ST DVD-+ on my Inspiron 7720 does not work. It is located in the Device Manager and claims to have the right driver, but will not read or write what whatsoever. Each drive is detected as empty. Mr. Mo attach to win 10, cannot back driver and have uninstalled/re-installed without success. What can I do?
-
Windows 8 Upgrade, Toshiba Satellite C660 Matshita DVD does not work error code 19
I just upgraded my Toshiba Satellite laptop to windows 8 and having a problem with my Matshita DVD-RAM UJ890AS. In Device Manager, I got the error "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Now, I tried to change the registry, but it shows no upper or lower to remove, I also uninstalled the driver and re-installed and I used the automated microsoft fix dvd all to nothing does not. Windows troubleshooting tool shows the problem but can not solve? Help me please!
HEALED!
All you have to do to avoid this error, code19 is to uninstall Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. I thought that it had been uninstalled before that I've updated but I was wrong. I just uninstall both and hey presto it works :) -
Satellite Pro L300 - Player DVD 10 on Vista error code.
Can not see the DVD drive in 'my computer' in Device Manager its display in car but with yellow triangle, after watching the news, the State of the device is "this device cannot start. (Code 10) "tried to restart 2 times. It's does not.
Also the drivers cheaked, on my computer and internet, windows is saying there up to date and im running the latest.Tried uninstalling the drive and restart which does not happen.
When instering a disc from the player to move and rotate the disc, so im hoping that this is a technical question and did not need new disc.Any help is welcome
Thank you
Hi mate
Don t you worry it seems that it s just a registry problem.
First of all, remove the CD/DVD drive in Device Manager list.
Then, go to the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:+ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} +.
Details here:
http://support.Microsoft.com/kb/270008/en-usReboot the laptop.
Wait that the OS again recognized the CD/DVD drive and check it out.Welcome them
-
Satellite Pro 2100: CD-ROM/DVD-ROM is missing - error code 39
Hi all
After an unsuccessful attempt to install a key USB TV, my DVD/CDRW drive has disappeared. It still works, I can hear it working, but Windows XP does not know more that the computer has this feature. It also is not upward under 'my computer' more. System Device Manager also tells me there is a problem (code 39), and displays an exclamation point in front of Mat * un UJDA740. What can I do? How can I recover my CD-ROM/DVD-Rom drive?
Thank you
SHLHello
This issue has been described a lot of time in this forum, and the solution has been found.
Please check this forum announcement:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483I guess that the solution to this Microsoft Web site will help you:
CD-ROM drive or DVD-ROM seems to be missing
http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553or
http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060
I hope I could help
-
Satellite L450D - cd/dvd player not recognized: error code 39
Hello
drive my laptop has disappeared from the 'my computer' screen and will not load disks; You can hear it turns as it plays, but then nothing comes. I checked for it Device Manager, and it comes up with the message "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».I tried to update the drivers for it, but windows says I have correct and up-to-date drivers installed. I can't seem to find the drivers for it on the toshiba site and to be honest I'm not entirely sure to try to uninstall and reinstall the drivers without a bit of comfort that I have the correct driver. I'm tempted just to do a system restore, but I have a lot of things stored on the laptop that I (stupidly!) have not backed up yet and can actually copy in the distance the system on disk, because the hard drive does not work...
If there is a way to access installing the correct driver for the disc drive, and then uninstall the damaged one and reinstall the right pair, I prefer to do that.
Any help on this would be greatly appreciated!
Thank you
Hello
Check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=259036 another forum user posted on the same issue. Try again with the advice given by PauPau.
-
Won disc '; t eject the DVD drive. No error code
I can't eject a disc I burned my DVD player. Dell XPS M1530 running windows vists. Disc plays but won't eject.
You may have a hardware problem with your CD/DVD drive.
Use the trick of trombone below to open it.http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm
http://www.ehow.com/how_2093458_remove-stuck-CD-from-CD.html
http://www.insidemylaptop.com/remove-CD-DVD-disc-from-not-working-laptop/
See you soon. Mick Murphy - Microsoft partner
-
Whenever I try to build my project on a blank DVD I get this error code to halfway through saying (meaning Code 51 A 00). Does anyone have an idea as to what is happening?
Sense codes are usually burner or media. Try the building to a folder or an image as a test.
Many of us never try to burn from yet. For windows, build the image and burn with ImgBurn.
-
Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has left a couple of weeks of work. Anyone have an idea how I can get it working again?
Hi Sunday47,
There are many causes of Code 39 errors:
· A required device driver is missing.
· A required binary file is corrupted.
· There is a problem with the file I/O process.
· A driver that refers to an entry point in another binary file cannot load.
I suggest you try the following steps:
Step 1: Run the fixit available in the link below
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060
If the problem persists,
Step 2: Uninstall and reinstall the drivers.1. click on start and then click Control Panel.
2. click on system and Maintenance, click System, and then click Device Manager.
Note If Control Panel is in Classic view, double-click System and then click on Device Manager.
3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
5. When you are prompted to confirm that you want to remove the device, click OK.
6. restart the computer.
After the computer restarts, the drivers will be installed automatically.
Click here for more information.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Need help!
Recently bought a laptop Dell Inspiron 1525 using the Vista operating system.
The DVD + RW device worked but recently failed.
Device Manager found the driver who is Optiarc DVD +-RW AD 7580 A ATA Device
Device Manager is a (-) marker that tells me that the driver does not work.
I tried to update the driver but the message received is "already installed the latest driver.
I wanted to uninstall driver and rebooted the system.
On reboot, the system attempted to reinstall the driver for my CD ROM
I then received message 'disk device software was not successfully installed ".
Also received message "Windows cannot load the device of this material. Code 39 "
At the present time, my CD-ROM device does not work.
I would appreciate anyone who has a solution to this problem.
Thank you in advance.Have you recently installed a new burner software? Several of installs it burner can cause error 39. You can rightclick this link to another thread of responses on the deletion entries "Upper filters" and 'down '. You can remove those creating the CMD file I'll paste it in below, created by William Keener.
- Copy carefully and then paste the following three commands in Notepad:
Reg export HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}-%userprofile%\desktop\CDFiltersBackup.reg
reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------UpperFilters f v
reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------LowerFilters f v- Save the file to your desktop as DeleteCDFilters.cmd.
- Right click on the DeleteCDFilters.cmd file to your desktop, and then click run as administrator.
Note After running this script, all custom CD/DVD filter drivers installed programs maybe isn't able to use your CD/DVD until your reinstall these programs. If the script command solves the problem, you can restore your custom filter of CD/DVD drivers by double-clicking on the CDFiltersBackup.reg that the command script exports to your desktop.
(Soon we will see a button "FixIt4Me" of his team to do this automatically.)Mark L. Ferguson MS - MVP
Maybe you are looking for
-
My Satellite L450D-11W is slow after you complete Sytem restart
Hello I recently rebooted my laptop from the Toshiba recovery disc after problems with laptop computer slowing down to a snails pace trying to do something about it Even after that the laptop has been completely restored and with no other loads other
-
Bluetooth settings lost on the Satellite L850D - 12 p
I seem to have 'lost' my Bluetooth settings, including the icon at the bottom of the screen.I tried to download a driver, but I'm not sure I have the right pair. I downloaded the driver Package version Realtek Bluetooth filter 12.28.2013.0912 81.5 MB
-
I've recently updated to FF4.0 5.0.1 and now whenever I boot Firefox I have an error message. When I click OK in the message of Firefox continues to load and seems to operate normally.
-
Spectrum 13 2016 HP: CompatibleHi Docking Station
Hello I need to know what dock is compatible for my spectrum of hp. If zbook dock is compatible for my crush 3 and USB - c? I need a dock that can do two output screen. is love at first sight dell 3 compatible dock?
-
HP 250 G4: Yet I am interesting in the upgrade of my GPU (laptop)
I have a computer laptop g4 250 HP with an intel i5-5200u and integrated graphics card HD 5500. I've heard a thousand times that it is impossible to add a dedicated gpu on a laptop, but: HP provides aservice guide with the largest part of the laptop.