DVD is not recognized on my Satellite P100

Similar Questions

• New DVD drive not recognized on my Satellite Pro 4600

  Hi all

  I recently bought an engraver of DVD in NEC ND-6650 nine.
  This drive is NOT recognized by my Satellite Pro 4600 at all - neither Windows 2000 nor in the BIOS (v 2.60). BIOS updates higher than the 2.60 version are not provided.
  Does that mean I can forget about using the new writer in my old notebook?

  Thank you and best regards,

  Nils

  Hi Nils,

  I suspect that your new drive may be not be compatible with your laptop. Like all scanners to your new drive will be configured as slave or master (or CSEL possible), and this configuration should match your laptop.

  Usually your hard drive is configured as master on IDE channel 0 with optical drive is the slave on the same channel device. However, you may find that your optical drive is configured as master on the IDE 1 channel.

  Normally the setting is preconfigured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure they are the same.

  Kind regards

• Drve DVD is not recognized in Windows - Satellite P25

  Hello
  IM the owner of the satellite p25 last night somehow got my pirate pc sience then im trying to reinstall my operating system
  but the main problem is that my bios recognize not my dvdr (uj - 830 b) in windows I can see, but I'm not going to see in bios, any ideas how can I boot from a dvd to reinstall my windows?

  Hello

  Why are you suggesting that the drive is not recognized in the BIOS?
  Have you tried different options to boot from the CD?

  Usually if you press the C key immediately after starting the laptop, you should be able to boot from the disc. In addition, you must change the boot order in the BIOS.

  Have you tried to boot from various records as the original CD of Windows?
  Maybe your first CD is corrupt and that's why the drive cannot start.

• SD card reader is not recognized on my Satellite P100 - 347

  I can't find the SD reader on count it. Tried to download patches and updates, uninstalled equipment etc, but always without success. Can anyone help?

  Thank you.

  Hello

  First of all, are you sure that your laptop supports this feature of device?

  As far as I know it doesn t support the SD card reader.
  Holders for laptop
  Port cardbus 32-bit/PC-Card 16 - bit PCMCIA and ExpressCard slot

  > Tried to download patches and updates, uninstalled equipment etc, but still without success
  So I really don t understand the strange tries to solve this problem by downloading and installing patches and drivers!

  The SD card slot is simply not available!
  So, how a software update should solve this problem if the material is not available?

  You're really weird?  :|

• DVD is not recognized on Satellite L500-1XJ

  Hi all

  The DVD is not recognized when a dvd was released in the laptop.
  I tried to reinstall the driver but no luck.
  Does anyone have an idea?

  Thank you

  Gunter

  It is not easy to say what the problem is here.
  We don t even know what DVDs you are using.

  Maybe you should write a little more of everything cela and offer some fact and relevant information. You know, for a better understanding.

  Also which driver you have installed again?

• AIO 600-1055: Win10 did not work & MS could not make it work. Reinstalled Win7 & now the DVD is not recognized

  Have HP AIO 600-1055 Desktop. "Upgraded" to Win10. Didn't work & MS could not make it work. Reinstalled Win7 and now DVD is not recognized

  Hello:

  See run the resolutions listed in the link below the job for you.

  https://support.Microsoft.com/en-us/KB/314060

  #3 or #5 usually work.

• DVD drive does not burn/erase RS - Satellite P100-347

  Hello

  I bought a Toshiba Satellite p100-347 PSPA6E laptop computer. It has a DVD burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn any DVD (please see example using dvdino: http://tinyurl.com/2hbpqv).

  However, I can't rewrite on my Maxell dvd + rw (1.4 x speed) dvd. whenever I go to a software application to erase a dvd that I wrote on, it says unrecognized format. For example, Nero says "this disc is not rewritable and therefore can not be deleted. Please insert a rewritable disc.

  The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(

  Please can anyone help:(je suis vraiment coincé et il serait beaucoup aprécié)

  JAS

  Hello

  As you probably know, readers don t support all kinds of media.
  I mean not every CD - R, DVD - RW, CD + RW, DVD + RW, and so on, average is supported.
  I can confirm these issues in my practical knowledge I tested for several months and many media, I use the TDK on my laptop and only CD or DVD media.
  They work best with my drive...

  But I'll give you a tip:
  You should remove other software burning like sonic, etc if you use Nero. The joint software sometimes makes trouble.

• Satellite M70: DL - DVD are not recognized on Pioneer DVR-K16S

  My DVD player does not recognize DL media (this device is compatible DL) so I can't burn this type of DVD, that someone can tell me why? all other media CD and DVD works great. I can write and read, but with DL, I can't write because this type of media are not recognized. I tried to find information and driver and firmware on the internet, but I can't find note on DVR-K16s pilot.

  I have a satellite M70

  Best regards.

  Hello

  According to the specifications of the Satellite M70, it should be possible to burn the DL DVD.
  It's not easy to say why you can't burn your DL media.
  You know that not all readers to support all of the CD and DVD.
  A friend of mine tried to use DL media. There were also some problems with another drive.
  I recommend that you test some DL media.

• Try to get the HD-DVD player to work on the Satellite P100-463

  Hello world.
  I bought this baby the weekend and since I am struggeling trying to get HD-DVDs to work on it. I added the HD_DVD xbox 360 drive, but Power DVD Software Advisor continues to say that the graphic card 9Geforce Go 7900) drivers must be updated to read HD-DVD content. Now, there is no available such as newer driver installed (84.0?)

  Can someone please advise if the card supports protection hdcp anyway? Maybe my problem is another source.
  Thanks for the tips.

  Wait do you use player designed for the Xbox in the Satellite P100?
  Hmm, I m surprised that this device is compatible with the Toshiba laptop.
  Anyway, as far as I know you need a special DVD player to play and watch HD-DVD on the laptop.
  A simple WinDVD does not support the new HD-DVD.

  By the way: I know a Toshiba model that shipped with the HD_DVD drive.
  It was a Qosmio G30 DVD HD model.
  I found a new Nvidia GeForce Go7600 8.3.2.7 Version graphics card driver update in the download section of driver on the Toshiba site
  But I put t know if it s compatible with your card...

• Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

  Hi all

  I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

  I installed the latest BIOS v2.50 as well as the latest Windows patches.

  To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

  I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

  Mounting frame is also OK (tested with the original Toshiba DVD ROM)

  Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
  What is generally a problem

  Thanks for reading my ad and you answers or advice

  Klaus

  Hello

  It won't be very easy get your new work of drive on your S1, I will explain why:

  Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
  their place according to the requirements of the laptop.
  Three settings are available: master/slave/CableSelect

  Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
  a disc factory settings in bulk comes as a disk Primary Master or CS.

  There are two options how to get to missing jumpers to make it work.
  (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
  (2) by a bridge of material on some pins to the back of the drive.

  As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

  As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
  According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

  start of quote:
  Dear Sir.

  The drive is detected beeing as a master drive.
  This setting cannot be changed. Are there no rider to do so.
  How mount you the device to your laptop, it's up to you.
  It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

  Kind regards
  end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

  As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

  Concerning

  chain

• SD not recognized on the Satellite A100-787

  Although the card slot recognizes the memory stick from Sony, the SD card is not recognized at all. I tried the card on the other computer and it worked fine. The driver for the card slot works well.

  Any ideas?

  Sorry, but it is not easy to tell what can be the problem. What is the capacity of this SD card? You have produced high quality or some unknown manufacturer SD card?

  If possible, try to get the second SD card and test how it works with your laptop Satellite A100.

• It is not recognized on Toshiba Satellite M70-169 Web site

  Hello
  I have a laptop TOSHIBA SATELLITE M70-169
  I wanted to update my drivers, so I logged on the TOSHIBA site.
  The problem is that my phone is not listed on the site, there are * M70-168 * and * M70-170 * but not * M70 - 169 *.
  I tried the recognition by serial number, result: DO NOT RECOGNISED

  I tested the autodetection, and here too, the result was: DO NOT RECOGNISED.
  I am surprised that my laptop is not recognized on the official website of TOSHIBA, while I had bought in a store.

  Can someone tell me if he had the same problem and give me directions to upgrade my laptop?

  Thank you

  Satellite M70 is old enough laptop model, and I can imagine that auto detection tool doesn't properly work. Your laptop is the model European and part PSM70E number (very important for research).
  In any case, you can find all the drivers or updates manually. Follow these steps:

  Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  Click tracking options:
  Type of product - ARCHIVE
  Family - SATELLITE
  Series of products - M SERIES SATELLITES
  Model - SATELLITE M70 (PSM70)
  Short model No. - PSM70E
  OS - operating system

  And all of the available stuff appears there.

  If you have any other questions let us know.

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• DVD - ROM not recognized with setting of M/S

  Hello, I just bought a DVD SD-R2412 drive to replace my dead drive (same model). However, my old drive was CSEL type and this news is M/S. I didn't know there were differences in the same model. This new drive is not recognized by Windows XP (SP2) and disappear the second IDE controller. In addition, it is not possible to boot from the CD, so I guess that the BIOS is also not recognize the drive.

  I saw an exchange of views on the reverse (CSEL M/S, new old) and some solutions for this case, but I have not seen all the comments on my problem.

  My guess is that the drive is configured as a slave and the BIOS is not able to recognize in this position. If so, the question would be if there is a way to configure the drive M/S to act as a master.

  Any ideas?

  Thank you.

  Hello

  It will be very interesting to know what unit of Toshiba you have. As far as I know, the drive is already set to slave, but I put now on exactly the position of the rider. However, take a look on the label which is located on the drive. You can find a picture how to affect the small rider master or slave.

  Best regards

• HP Pavilion DV6 DVD disc not recognized and the media player does not work

  My HP DV6 is having... issues.  Windows 7.  A little history:

  Recently (2 months ago) he quit the installation of the updates of Windows and would download 3 whenever I stop.  HP support could not help or Fix - It programs work.  Had to restore it to factory default and that solved THIS problem.

  Reading card camera (which I have done before) attempted recently, but he did not read / was not recognized.  Today, tried to launch a DVD, and when it does not start automatically, I discovered that it is not recognized.

  Tried HP Support Assistant, who told me that the model # of the DVD drive that I was using, then proceeded to say there was something wrong with the driver... and he couldn't fix it.

  More?  (Windows Explorer, not Internet) will be often expire or crash...

  I have Norton Internet Security with live update and have yet to have virus problems.

  Any help or questions greatly appreciated!

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start, type regedit in the Search box, and then click regedit in the programs list.
     
     If you are prompted for an administrator password or a confirmation, type your password, or click continue.
  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}