SD card reader is not recognized on my Satellite P100 - 347

Similar Questions

• DVD drive does not burn/erase RS - Satellite P100-347

  Hello

  I bought a Toshiba Satellite p100-347 PSPA6E laptop computer. It has a DVD burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn any DVD (please see example using dvdino: http://tinyurl.com/2hbpqv).

  However, I can't rewrite on my Maxell dvd + rw (1.4 x speed) dvd. whenever I go to a software application to erase a dvd that I wrote on, it says unrecognized format. For example, Nero says "this disc is not rewritable and therefore can not be deleted. Please insert a rewritable disc.

  The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(

  Please can anyone help:(je suis vraiment coincé et il serait beaucoup aprécié)

  JAS

  Hello

  As you probably know, readers don t support all kinds of media.
  I mean not every CD - R, DVD - RW, CD + RW, DVD + RW, and so on, average is supported.
  I can confirm these issues in my practical knowledge I tested for several months and many media, I use the TDK on my laptop and only CD or DVD media.
  They work best with my drive...

  But I'll give you a tip:
  You should remove other software burning like sonic, etc if you use Nero. The joint software sometimes makes trouble.

• digital multimedia card reader is not recognized by the windows operating system 7

  is there a solution to my problem with the digital media card reader not recognized by using the windows operating system 7

  This card reader appears in Device Manager?  If Yes, then you have a problem with Windows 7 'default' to not show empty removable disks, which aren't floppy drive.

• USB SD card reader is not recognized by Windows XP.

  None of the previous posts here helped me. Here, I write again.
  When I plug my SDHC Targus card reader I receive a "USB device" balloon unrecognized in the taskbar.
  So, what are we doing about it? I suspect that the Targus seller should have provided a special driver for that.

  Note that this goes on my IBM laptop and my desktop Dell two very fine model material. Both XP running.

  Thank you
  Mike

  Hello MikeLupo,

  Thank you for your message.  Other USB devices work on your computers?  If so, which can exclude the USB port.  This would lead us to a driver problem.  Your computers are up-to-date on Windows Updates?  Execution of Windows updates can load drivers that may correct this problem.  You can also click HERE and enter your SD card reader model and possibly download a driver.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Card reader Y530 not recognizing SD card

  I have posted about this same problem in November and have not yet repaired. Original message:

  "

  My new y530 running Vista Home Premium can not read my SD card via the integrated 6-in-1 card reader. As far as I know, the Device Manager is only working for memory stick and xd.

  http://img.Photobucket.com/albums/V112/strokingdeaded/DMC.jpg

  I tried to install the latest drivers for SD and ThinkVantage updates but did not work. When I hold my card in, it does not appear as a removable storage device and nothing happens.

  And technical support does not support y530. »

  I read a post since then with someone having the same problem. I tried to do what he said, but it was rather vague and has ended up does not. I've since contacted support and could not get them to give me answer except "send in for repair. I prefer not to do that because I don't like to be without my computer, and if anyone could do it, why can not I? Someone at - it ideas?

  I finally got to work. What I did expect a system start let me access the SD drive. He did this once from time to time in unknown conditions. When I was able to access it, I wen to the Device Manager and removed the crib card drivers and reinstalled them. Each subsequent startup was the player available to use.

• Multiform memory card reader does not work on my Satellite M30

  Nothing I will allow me to get my on my satellite m30x 111 multiformat card reader to recognize any type of memory card, I put in the slots, whether sd, mmc, etc... Can anyone suggest a solution? Should I install specific drivers? The same cards are recognized when it is attached by usb, for example in a camera, etc.

  Thank you! Toby.

  Hi Toby

  Can you please check the Device Manager and see if there's some hardware component indicated as unknown? As far as I know that the card reader should be listed under SCSI and RAID controllers.

  Please check!

• SD Card Reader does not work on my Satellite Pro P100

  Help, please.

  My card reader reads nothing at all. I have a P100-429. Could you please tell me how I make it work and what drivers to install?

  Thank you

  Hello

  Have you changed anything on the laptop?
  The laptop comes with preinstalled Toshiba recovery image and all the drivers and utilities are already preinstalled and you don t new drivers.

  In my view, you must first check if the card is compatible with your laptop.
  Are you sure that the laptop card reader supports the card to 100%?

• DVD is not recognized on my Satellite P100

  Just installed windows 7 on Satellite P100, now, do not recognize the DVD drive?

  Can you please use more than one phrase to describe your problem?

  DVD drive in the Explorer Win State?
  DVD player in the State of the Device Manager?

  Have you noticed this problem after installing Win7 or later?

• Output SPDIF does not work with the Satellite P100 - 347 (PSPA6E)

  Hey guys and girls, firstly want to apologize if this is in the wrong section. I'm kind have mind boggled here, and I can't concentrate properly!

  OK, so that's the problem: After owning this notebook for about 3 years, I just found this, it's supposed to be obtained a digital audio output ("Spidf").
  If pressed like a rabbit, I went out and bought a mini-TOSlink adapter and used the optical cable of high quality from my sound cinema surround!
  So I wack these babies, until I just without result! Selecting DTS in several dvd players, I can't sound through spdif at all. Hell, I don't even optical red poking through, I can't even select spdif in sound properties! I can exclude that it is cable and adapter because it works perfectly in my iMac next to me here.
  Does anyone have an answer as to why?
  To rule out a question that I'm running Windows XP.

  Thanks guys,.
  Josh

  Hello

  What OS do you have?

  First of all, you must update the audio driver.
  On the Toshiba driver page, you can find the last being.

  Then in Control Panel-> sound, you should check the Read tab.
  If you are using Vista, then you must right click and should allow hidden and disabled devices.
  Then the new devices should appear. One of the devices must be digital output.
  Then you could mark it and could allow it.

• Tecra M2 - card reader does not work on Windows 7

  Hi all

  I installed Win 7 on my TECRA M2 and everything worked well at the same time... except for one thing! The SD card reader is not recognized (works well with XP).
  Hint please?

  Thanks in advance

  JP

  Hello!

  The card reader is listed in the device with the yellow exclamation point Manager?

  Normally, I suggest that you should try the Windows Vista driver card reader, but there is no driver on Vista card reader available on the Toshiba site.

  So it seems that you have to live with this problem or you try a driver from another laptop computer card reader

  Good bye

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• Y50-70 - USB Reader and card reader no longer recognized

  I have Lenovo Y50-70 (running Windows 10) and my WD My Passport Ultra external drives are more recognized (they worked fine until 3 days ago). My card reader CF is no longer recognized either. My Samsung Galaxy S5 works well.

  The WD My Passport drives Ultra both my card reader still work with my older ThinkPad, which works in Windows 7. This isn't a disc problem, or a cable problem.

  When I look in devices and printers, the WD My Passport Ultra appears. It has the following warning sign for troubleshooting option. When I troubleshoot it comes back telling me that the driver is not installed. Continuing, he finds the driver, install it and asks to restart the computer. After the computer restarts, the drive still does not appear.

  When you look at the properties of the drive, it says that the driver is not installed and an error code 28 the list.

  Comment to Moderator: The model is added to the object for clarity.

  fgossieaux wrote:

  Thanks Bill - Sorry for not being specific. Both my WD drives (which have no external power sources) that my card reader does not work. I tried to remove the drivers and rebooted the computer, but none of it works.

  You can try to restore to a date (three or four days before the problem) and see if you have the problem solved.

• Internal SD card reader does not recognize SD card

  I have an internal SD card reader I have ever used before.  I am trying to download pictures from an sd card that I used on my desktop and it works fine, but when I insert in my laptop nothing happens. I went to start / my computer and there is no driver does not list other than my cd/dvd driver. How can I fix it?

  Mini SD cards and adapters are the hassle that I connect
  my phone with a USB cable for uploading photos.

  In any case...

  The card reader should not require no installation. If this is not
  recognized, it can be fried or it is possible, there could be a
  loose connection inside the housing.

  Watch the following video tutorial:

  Install the media player.
  http://www.YouTube.com/watch?v=_LWrxN6W5Bc

• SDHC SanDisk card reader does not read cards on Windows 8.

  I recently updated to Win 7 to 8, after that my SD card reader is not read maps more. Y at - it a driver update that I can do? I couldn't find one in the sites of Sandisk or Microsoft.

  Original title: Sandisk SDHC card is not recognized in windows 8

  I tried not to the foregoing. But after a windows update over the last weekend, he started to work again.