DVD material

Similar Questions

• Windows does not recognize the DVD material but will load the drivers

  Tried to reload the drivers without result.

  Event poster Viewer cannot load the drivers BHDrvx86, ccSet_NIS, abd SymIRON

  dvd material is compatible with xp?

  have you checked the requirements from the manufacturer's website?

• Driver DVD WinXP for Satellite A200

  Please help people dear forum,

  I am running XP on Satellite A200.
  I went to the place on the net to download the driver for xp dvd.
  Research says: no driver available.

  Can someone please send me the driver for XP for a Satellite A200 DVD?
  DVD material is: TSST corp CD/DVGW-TS-632D

  Yes, I know the place to download.
  http://nl.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=NL

  The DVD for Vista 64-bit driver is available.
  But I do not know if it is good to use on XP (32).

  Well...
  Just install the DVD for Vista 64 driver (for 32 sound not available) and my DVD player is still not visible.
  And I guess that moderators work for toshiba, so it's fair to wonder:
  Specific no reason why the DVD for XP driver is not available? Or a more frightening question: XP still supported by Toshiba?

  Very interested in fellow computer useful to receive the DVD for XP driver first.
  And also very interested in the Toshiba answer on my question about the XP support.

  Greetz,
  Nano

  Hello

  > The DVD for Vista 64-bit driver is available. But I do not know if it is good to use on XP (32).
  Sorry, but I didn t find the CD/DVD drivers. or for Vista 64-bit, 32-bit or XP.
  Could you please tell me this driver?
  Perhaps you are which means the DVD player?

  Anyway, the fact is that there are drivers for CD/DVD don t players. Microsoft operating systems (Vista, XP) are already equipped with these drivers and generally you n t need to install third-party drivers 3rd! The STRANGE should be recognized automatically by one of the OS.

  PS: To my knowledge, this is a user forum and I don t think you can find someone from Toshiba here anyway, the XP is certainly supported by Toshiba because the XP drivers are available on the page of the driver. So I see no serious reasons why XP should t be supported. You know

  Greetings mate

• Satellite Pro 4600: WinXP - no hardware acceleration for dvd?

  I have a satellite pro 4600 pentium 3 800 with 128 MB of ram and graphics Trident CyberBlade XP card. The device is perfectly able to reproduce DVDs with the software alone by using PowerDVD 6. However due to the fact that my battery is almost dead, I would be able to play the DVD the most optimized battery settings.

  Setting of the unit (approximately 350 mhz) low processor should be able to play DVDs if backed up by hardware acceleration, since cyberblade claims to be a card directX 7 with motion compensation and idct. However 4 PowerDVD 6 PowerDVD and windvd 7 do not recognize hardware acceleration under windows XP.

  In the past, I had a similar problem with a laptop computer with a graphics card than cyberblade i7. I was then able to activate hardware acceleration using just powerdvd 4 and windows 98, but I don't want to resort to that.

  Can someone help me? Do you know any software reading with the support of cyberblade XP Windows? Do I need any other drivers? I have the drivers on the toshiba site, and they date back to 2001.

  Hello

  Unfortunately, I n t have any experience in hardware acceleration of the cyberblade card but mobile graphics cards are not similar with Office PC cards.
  As far as I know the unit has a support of the Trident Cyber BLADE XP video controller 16 MB VRAM external video and DVD material.
  However, you will find the Toshiba drivers on the Toshiba site but if you need one on so I would say to ask the support of Trident.
  But if you use no drivers Toshiba you can do at your own risk!

• DVD read slow and jerky.

  Recently, I was copying a DVD on my hard drive of DVD read/write drive using the. Apparently there are a lot of mistakes on the DVD disc so the unfinished copy. Subsequently, I found that DVDs who played correctly on other computers would not properly play on it (XP SP3 on a Dell Inspiron 1525), but rather they play showing jerky images and not smoothly as usual.

  I tried to uninstall the unit DVD and re-install it - which has corrected this problem on other computers, I have - nothing works. I also tried the "fix" of registry by removing the filters above and below - no help there. See information system using Nero, it shows the unit DVD controller to be the "Primary IDE" with DMA off. I checked and found the "DMA if available" box to be listed under properties to "Primary IDE". There seems to be no way to activate DMA for the DVD otherwise.

  I replaced the DVD material with another identical device, that I know works and it also plays videos wrong so I think that it's a software problem and not material. I would like suggestions.

  Thank you.

  Hi again Rob,

  I found the solution!

  I started to follow your suggestions in order and completed stage of scanning of files. I am lucky to have two computers running and while it was appeased with the tests, I kept searching online and found this site:http://club.myce.com/f61/troubleshooting-enabling-checking-dma-windows-vista-xp-2000-me-9x-101616/. There was a big discussion on the problems of DMA and the author had a simple solution to try. It seems that Windows will automatically disable DMA on an IDE channel after several errors occur with the device it controls. There is no 'normal' way to reactivate by simply selecting "DMA if available" option in the advanced properties of the controller menu. I made sure the primary IDE is the DVD controller - and not the hard drive controller - then uninstalled. I did a reboot and that Windows apparently forced to reinstall the primary IDE controller, after that he found the DVD device on the system... At least that's my understanding of how it worked - I'm not much of a Curmudgeon. In any case, it worked like a champ. I checked the disc using Nero and it's back to the speed (3.2 x at the beginning and continues to increase as it tests the reader), videos play very well also.

  Maybe it will help others with the same problem.

  Thanks again for your help. I will keep your suggestions for the future.

  Tom

• Burner DVD not recognized computer Gateway 2750 laptop under Vista

  I have a DVD burner and my computer recognizes that the CD burner, I try to update the drivers but it doesn't show any DVD material. __

  I have a laptop gateway 2750 running Vista Home Prem and I a bicoeur precessor.  My computer only recognizes the CD-ROM drive and does not see the same DVD at all.  I tried updating my drivers but it won't allow me to add a DVD driver. Help

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Check with the support of the door of entry for firmware updates and known issues.

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP 15 laptop: DVD does not play smoothly. Help

  I got a new laptop about a month ago. At first, I was able to watch a DVD titled "Australia" and it worked perfectly fine. Now, I have tried (unsuccessfully) to watch the other two films using the preinstalled CyberLink Power Media Player 12 (the same thing that I've used before) and it does not work. What happens is I put in a DVD in my laptop and at first when he travels the sponsors or creators such as BBC, it works fine. But then comes the time for the actual film to begin with, the first audio will play while the video itself is trying to go, and then sound stops and will wait for a good ten minutes in the wait for the video to catch up with the sound. In other words, a person walking at a normal speed from point A to point B in a normal period of 3 min now takes at least 7 min for audio (which runs faster) and the video to actually play. I tested to see if it was the drive in place, but I have songs on CD on my laptop, no problem. So I don't know what to do. Any suggestions? I am also still under warranty.

  If there is a problem with the DVD material he would play no video at all so we can exclude. I'll tell you that it is a software problem so you only problems for real part of copyright subject to digital rights management. If you're ready to experiment a little, I might suggest that you try to download the VLC media player free, that will play DVDs and see if it's better.

  http://www.videolan.org/VLC/

• Bad output HDMI with Qosmio G30-153

  The display of the output to the HDMI port on two sets of HDTV in the mine is not as good as DVI or ATI 1800XL 7800GTX. The output of the screen seems to be scanned, where of course the taskbar and another part of the screen does not appear and the color screen is also poor.
  The resolution is correct, 1920 x 1080 and I use the latest Toshiba 8.3.2.8 display driver.
  I am disappointed by this expansive toy, hoping to play HD-DVD material, but with these display poor, no luck.
  I think that the driver is the question, but what can we do with Toshiba?
  Does anyone with G30-153 has the same problem?

  Kind regards

  Ahmed

  Try 8.6.0.5 from here:

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/video_driver_nvidia_25096B.exe

  or here:
  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/nvidia_display_os2006189a.exe

• Satellite A300 - 1 5: Power calibration area error has occurred

  I am trying to create DVD data backup on my recent acquisition of Satellite A300 - 1 5 using Toshiba Disc Creator, almost 50% attempts are completed with the following error message

  A power calibration area error.
  Please check if the disc is scratched or dirty (or other!)
  (Error code: 380381-26-00037304)

  This message can appear in begging, shortly after the start of combustion, or even after the burning and in the finalization of the disk...
  Some DVDs are totally damaged, some are OK...

  I updated the firmware (from TO01 to TO03), cleaned the lens and tried again with some TDK discs, I got the same results, if data on both drives are still readable (lucky!)

  I am confused and frustrated, I already had my phone replaced for a defective Panel... and we here are... again!

  Suggestion / help is really appreciated
  Thanks in advance

  Hello

  The power calibration error is very generally if the drive laser lens cannot be calibrated (moved) into the right position.
  This can be caused by bad disks, is not compatible, or in most cases, this problem occurs because the CD/DVD drive is malfunctioning.

  If you didn t test different drives from different manufacturers, so you should do this.
  Otherwise I would recommend you to contact the technician of the ASP for the verification of the CD/DVD material.

  Good luck

• How to record 1920 x 1080 video without quality loss? Do not use blu ray.

  How to record 1920 x 1080 video without quality loss? Do not use blu ray.

  It is physically IMPOSSIBLE to use HD on a DVD material and to play in a DVD player... the data rate is different, it is BluRay invented

  Link to DVD Demystified FAQ http://forums.adobe.com/thread/544206

• All of a sudden my computer can not recognize my dvd rom; It's a laptop, so I can't disconnect it and reattach. All ideas, software is there, but just not material rec.

  I have a gateway laptop with xp.  All of a sudden it won't recognize my hardware dvd player only.  Software is there but it says that there is no material.  Cannot take part in check but it should be good.  Hear, he starts to run, but his similar windows do not.  Help!

  Hello

  1. have you done any change in software on the computer lately?
  2 have you installed any third-party CD/DVD burning software?

  Method 1:
  CD-DVD combo drives have two lenses to write CDs and DVDs, respectively. First check with the manufacturer of the computer if the glasses are intact.

  Method 2:
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  See also:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 3:
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/

  I hope this helps.

• DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

  Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

  A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

  I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

  Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

  I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

  What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

  I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.

• What is this material: HL-DT-ST-RW/DVD GCC-4241N-DRIVE?

  Original title: what is this material

  Someone gave me this thing to plug into my laptop to see what it could be. Her little and takes 3 AAA batteries. That's what he says is hung. HL-DT-ST-RW/DVD GCC - 4241N - DRIVE

  Hi Bruce 1961.

  Of course, that sound like a DVD player for me. In addition, check under which category is that it recognized in Device Manager.

  a. go to start and type Device Manager.

  b. click on Device Manager.

  c. find the material and its class ID.

  That should give you enough insight.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Material of DVD and DVD - RW double layer

  I currently have the equipment following in my computer to read and burn the DVD.
  1.) HL-DT-ST DVD +-RW GSA-H73N ATA Device
  2.) TSSTCORP CDRWDVD TS-H493B ATA Device

  This material will allow me to burn it to a DVD + R DL (dual layer DVD 8 GB)?

  Thank you
  KJFK

  Hello

  Specifications: HLDS GSA - H73N drive Drive User Guide - specs say it will be
  http://support.euro.Dell.com/support/eDOCS/storage/P153464/en/specs.htm

  Specifications: TSST TS-H493B CD-RW/DVD-ROM Drive User Guide - will be read/read but not write double layer
  http://support.euro.Dell.com/support/eDOCS/storage/P135764/en/spec.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I try to install my photoshop material... but I have not a dvd player... is any way for me to do this without a dvd player?  I already bought the software in a form of DVD

  I try to install my photoshop material... but I have not a dvd player... is any way for me to do this without a dvd player?  I already bought the software in a form of DVD

  Download Photoshop Elements products | 10, 11, 12, 13

  Download the CS6 products

  Mylenium