DVD Player reads discs since the installation of explore 9 on vista operating system

Similar Questions

• DVD player stopped working after the installation of 12 items

  First, I loaded the disc DVD in the drive and tried several times to install 12 elements.  Whenever the program has been installed the computer would start flashing and the dvd drive may stop working. Every time I had to use a PIN to eject the DVD because it would not eject.  It worked well before its installation to 12 items. After that the program was finally installed dvd player worked.  But the program would be closed when you use it too often.  I finally just deleted the program of 12 items on my computer and install it on another system.  It's been a while since the abolition of the program from my computer. Tonight, I reinstalled the program Adobe 12 elements with the dvd drive works fine.  Trying to install the program, all loaded fine.  Then once more, the dvd drive eject nor does any work.  What happened several times with 12 elements of loading on my computer.  It is a real pain.  Now the DVD drive doesn't work, or eject.  Can someone help me out here?  It sucks. The other computer works fine.  It is a HP Pavilion, Windows 7 Home Premium system.

  Computer was off all night. Turned on this morning and the system works now.  I rebooted the system, at least six times last night with no result. I don't know what was different this morning, but everything seems to work.  So if it's not broken I will not try to fix it.  Thanks for posting. Dan

• CD/DVD-ROM not recognized since the installation of Vista, without errors

  Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to create Multi boot Operating System CD/DVD with drivers, application as default installation and Recovery Console alongwith with operating system encryption?

  I need an application for creating operating system in multiboot with drivers, application as default installation with the Recovery Console and operating system encryption. Help, please...

  Thanks in advance...

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• I get an error in the installation of silverlight - says that my operating system does not support 64-bit. I am running vista. How can I install silverlight?

  I can't install silverlight 5.

  Hello

  What web browser do you use?

  Silverlight version 5 supports 64-bit only for Internet Explorer. IVous can try to install Silverlight version 5 by using Internet Explorer.

  You can view the following link of Silverlight to check the system requirements:

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Alternatively, you can display the query in the support of Silverlight Forum for further assistance:

  http://forums.Silverlight.NET/13.aspx/1?installation+and+Setup

• I want to add the windows xp for my windows vista operating system

  I am currently running windows vista and I want to add windows professional xp as a multiboot. I can do this and if so, how?

  How to dual boot Vista and XP (with Vista installed first) - the guide step by step with screenshots
  http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm

  Install Windows XP on your pre-installed Windows Vista computer
  http://www.howtogeek.com/HOWTO/Windows-Vista/install-Windows-XP-on-your-pre-installed-Windows-Vista-computer/

  As always, with the project like this create an image backup of your entire hard drive (to an external USB drive) first.

  Acronis True Image 2011 - has a 30 day trial version available.
  (Install Acronis and then create a restoration/Rescue CD Media before starting the creation of an image backup)
  http://www.Acronis.com/homecomputing/products/TrueImage/
  The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
  True Image User Guides and documentation:
  http://www.Acronis.com/homecomputing/download/docs/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Re: Serial number down would work with the other Windows Vista operating system

  First of all sorry for my English.
  I have one question.

  My hard drive is broken with my recovery partition.
  If I download windows vista and install the system with my original serial number on the laptop, this will work or should I activate it after installation.

  I hope it's the same number that the front is installed on my first installation.

  Hello Marcin

  I doubt that the serial number that is placed at the bottom of the device works with another Windows Vista operating system. But it s worth a try
  You could test it I heard it's very rare cases it was possible

  In any case, if your HARD disk is damaged and it of not possible to create a recovery DVD using recovery software Toshiba disc creator, then you must contact the ASP in your country for assistance.

  If the warranty is valid the HARD drive should be replaced just for free. If you need only the recovery DVDs, then you can order it here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Concerning

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• Since the installation of CD images appear with a green cast. also print with a green cast. Earlier versions of Reader were ok. Concerned images do not have an inherent green cast. How can I fix. Could always revert to a previous version which had no pro

  Since the installation of CD images appear with a green cast. also print with a green cast. Earlier versions of Reader were ok. Concerned images do not have an inherent green cast. How can I fix. Could always revert to a previous version which had no problem?  G.W.

  Hi Q8F7B,

  Please let us know the version of the dowry of DC and operating system installed on your system drive.

  Is - this problem with a PDF in particular?

  Could you please also share the screen shot for the same thing?

  Kind regards

  Meenakshi

• my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

  my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

  No need to worry about the disk version. He would just install an update anyway once it has been installed. Download from the link provided below and use the serial number, you need to activate.

  Updates

• my dvd player reads all movies what do I do to get it working.

  my dvd player reads all movies what do I do to get it working.

  I had this happen to my DVD player recently.  The problem was that the disc I was trying to see it used a copy protection system is not yet implemented by my DVD player.  Normally, I don't have the DVD player connected to the network, so he had not received the updates of the firmware since I bought the player.  After that I connected it, you download an update of the firmware and I could see the movie.

  My recommendation to you is to see if the manufacturer of the DVD drive has an update of the firmware of your player on the website of the company and, if so, has it, then test again.

• DVD Player displays only not the files on disk?

  My dvd player does not open the files on a data disc, he is coming as a blank disc, but if I try it on another computer the files are on the disc? I don't know why please can anyone help?

  I think you can try a number of things here.

  1. put to UPDATE the reader, 2 REINJSTALL the driver.

  Both involve the following steps: click the startup type in the search box Device Manager, I usually get to DEV and it hits the top of the list, click on anyway and it will open the window of permission, click on continue or enter the password and this will open Device Manager which will show all the devices on your computer. Now search for CD-ROM/DVD-ROM drives and click on the + sign next to it and a drop-down list will appear and if you RIGHT click a MENU will appear with the following choices, software update driver, disable, uninstall, look for changes on the material and properties.

  Now, here's the choice 1 click on update driver will open a window that says two things search your computer or line choose SEARCH ON LINE. If she comes back and says you have the latest version of the software, then choose option 2 click RIGHT on the disc again is it closed and choose uninstall. When you do this RESTART YOUR COMPUTER and the driver will be reinstalled as new when it restarts.

  Good luck

  RickS

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.

  I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.  After you let it run for 3-4 minutes, I kill the task.  What can I do to get the player installed on this machine?  I tried using chrome, firefox, and explore and get the same results with everyone.

  Try the Installer http://get.adobe.com/reader/enterprise/ offline

• Since the installation of Google Chrome, whenever I start to upload photos into my computer, Adobe Photoshop opens upward.  How can I stop this from happening?

  Since the installation of Google Chrome, whenever I start to upload photos into my computer, Adobe Photoshop Elements opens upward.  How can I stop this from happening?  I tried to find a place to disable the plugin Adobe in Chrome, but can't locate.  Does anyone have a solution?

  Your answer showed no once again, but here are a few things to check:

  1. If you hold down the SHIFT key and then connect your camera that should stop the pse to open.

  Then go into workstation, do a right-click on the camera (by car), select Properties > AutoPlay and you should be able to change what is happening.

  

  2. glance in the organizer of items in photoshop under Edit > Preferences > camera and card reader and see if the start automatically is checked.

  (not all versions of the pse Organizer have that)