DVD writer detects cd but not dvd

Similar Questions

• My keyboard write Arabic alphabet, but not aid numbers?

  I have the English and Arabic fonts in my laptop with windows 7 Ultimate, when I switch to Arabic font I can write in Arabic it works well, but when it comes to digital values such as 123... etc., that he wrote to the English format, so I can write alphabets, but not numeric values (numbers), which really wired, any help will be much appreciated, I already changed the format of the numbers

  Region and language--> format--> additional parameters--> standard numbers to the appropriate Arab format, but he still writes English.

  Hello

  Are you using Arabic fonts shipped with Windows or have downloaded and installed from the Internet?
  Change the layout of the keyboard and check if it helps to solve the problem. Check out the link and follow the steps.
  How to change your keyboard type
  http://support.Microsoft.com/kb/258824

• lspci to detect i350t2 but not the vsphere

  I followed to adapters Intel®, VMware ESXi Server * driver and NVM Image compatibility information and chose only the version of the driver. It is installed successfully. Esxi is now while I'm cli and type:

  ~ # lspci | grep network

  0000:09:00.0 Network controller: Intel Corporation I350 Gigabit Network Connection [vmnic2]

  0000:09:00.1 Network controller: Intel Corporation I350 Gigabit Network Connection [vmnic3]

  0000:0f:04.0 network controller: Broadcom Corporation NetXtreme BCM5715 [vmnic0] Gigabit Ethernet

  0000:0f:04.1 network controller: Broadcom Corporation NetXtreme BCM5715 [vmnic1] Gigabit Ethernet

  It's ok, but then

  ~ # esxcfg - NICS - l

  Name PCI Driver link speed Duplex MAC address MTU Description

  vmnic0 0000:0f:04.00 tg3 up to 1000Mbps Full 00:19:99:0 has: 34:2 has 1500 Gigabit Ethernet Broadcom Corporation NetXtreme BCM5715

  vmnic1 0000:0f:04.01 tg3 Down 0Mbps has a half 00:19:99:0: 34:2 b 1500 Gigabit Ethernet Broadcom Corporation NetXtreme BCM5715

  It is also missing in vsphere client = > network cards. This is also only Broadcom Corporation NetXtreme Gigabit Ethernet BCM5715. How to initialize completely I350t2? What is the problem?

  Strange, the so-called vmkernel detected and claimed the devices, by assigning them to vmnic2 and vmnic3 (see the "VMkernel name" in the detailed output of material), which means that the driver should be ok.

  You can run these commands? :

  # ethtool-i vmnic2

  # esxcli network nic get - nic - name vmnic2

  # grep-i /etc/vmware/esx.conf vmnic

  module system esxcli # get - module igb

  # esxcfg - module - retrieves the igb options

  # enum_instances VMware_EthernetPort root/cimv2

  You don't have a pass through vmdirectpath active on a virtual machine with these cards, right?

  Someone in a similar thread said that he was working for them after an update of the firmware of the NETWORK adapter, have you tried? : Re: Intel I350-T4 only recognized by Esx 5.5, not by 5.5 U2

  Download Intel® Ethernet Boot Utility connections, images PXE and EFI drivers

  If all else fails, so at this time I can only imagine that maybe there is some BIOS or NIC configuration server BIOS interfering here. In general, this could be a parameter associated with interrupt handling. Update the server BIOS can help too.

  Have you tried another host or move the NETWORK card to a different physical PCI slot? Also, you might consider upgrading to 5.5 U3 independently to know if this will fix the problem.

• ATAPI DVD A DH16AYH ATA Device read DVD but not CD

  Engraver of CD/DVD in Compaq Presario 5010NX w / VistaBasic read any DVD but has problems with CD if I insert a music CD, sometimes it will open right and I can play music. Most of the time he just tells me to "insert a disc", usually open the status bar, but not always. If I close the drawer [or eject and close the tray] from 3 to 15 times, he finally opens the CD. Generally. Sometimes I drop and open it on my old computer Millennium, [which never fails to open the CD].  I bought a cleaning disc, but it still happens. Also, it stopped opening the tray with the manual key (1,200 works tent) and will always open with 'Eject' of the computer, but only with DVD and sometimes will open with the "eject" computer with the CD never if it is empty, so I always keep a known disc "opener" in the status bar. (if I forgot, I use a paper clip)

  I did an online search of the Device Manager for a driver update and he told me that the best software is already installed. I just need a new burner? Why is - that it will work with DVD CD not? driving me crazy. Thank you ps can not find a burner mfgr. says simply "drive SuperMulti DVD with Lightscribe" - pps I tried uninstalling the Device Manager, and then restart the computer - no change.  Haven't tried the support.microsoft.com/gp/cd_dvd_drive_problems diagnostic program no solution I came across a post from someone else who had the same problem [former position & 'uninstall & reboot' was the only suggestion on this one.]   I can't believe that it could be physical burner... why he wouldn't hesitate to read the DVD if it was a physical problem?  Help?

  Hello

  Check with Compaq Support, their drivers and documentation online and apply to the
  HP forums for known issues. Compaq can give you more information on the disk.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/

  ==================================================================

  Readers to use and this intermittent problem can be caused by wear.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• DVD/CD drive will read DVD but not CD

  My DVD player plays DVD but not CD.  Whenever I try to play a CD, the player is a kind of hum noise.  Finally, the Player opens and a popup tells me to insert a disc.

  I tried a system restore and the automated Microsoft fixit tool.  Nothing has worked.

  I use Vista Ultimate.

  Any ideas?  Thank you.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A50-109: manages the CD but not DVD player

  Hello

  I write from Türkiye.
  I have a problem on dvd rom. My dvd - rom can open the CD but not open DVD.
  What can be the problem? Can you help me please?

  Thank you very much right now...

  Sorry, but your ad does not give us enough information for a better understanding of the problem. You mean what DVD? You write about the original DVD movies or some created cottages, films, copies or what?

  Please test with different content (movies, the saved files and so on) and let us know exactly what is happening.

• writing cd Rw but not rw dvd .plz read the full message

  Hello Sir,

  I bought this laptop used at a local retailer, the hp compaq nc6400 model. Windows 7 installed on it. but the problem is that it writes CD RW but some DVD RW reading and does not not save. I tried to understand as far as I can tell, it's a combo drive because when there is no disc inside the icon on the cd shows DVD/CD RW E: drive, so to the best of my intellect, I understand that it is hopfully a combo drive. I also read the manual, even is written there. so, please guide me that how I can write DVD RW on my system and how I can confirm with certainty that my drive is a combo drive, not just a cd re writable? I read the question already posted to this topic and the answer too, but I don't want to use nero I would write using windows and the said method in windows help that is, dragging the files first. Please answer as soon as possible.

  Thanks a lot for your concern.

  You need to check the capabilities of the car - there are a good number of readers out there that read and write CDs but play only DVDs and impossible to write about them.  Compaq web site should be able to tell or you can get the brand/model number of the drive from Device Manager and do a Google search.
  "Hashimaaq" wrote in the new message: * e-mail address is removed from the privacy... *

  Hello Sir,

  I bought this laptop used at a local retailer, the hp compaq nc6400 model. Windows 7 installed on it. but the problem is that it writes CD RW but some DVD RW reading and does not not save. I tried to understand as far as I can tell, it's a combo drive because when there is no disc inside the icon on the cd shows DVD/CD RW E: drive, so to the best of my intellect, I understand that it is hopfully a combo drive. I also read the manual, even is written there. so, please guide me that how I can write DVD RW on my system and how I can confirm with certainty that my drive is a combo drive, not just a cd re writable? *I read the question already posted to this topic and the answer too, but I don't want to use nero I would write using windows and told method in windows help that is, dragging the files first. * Please answer as soon as possible.

  Thanks a lot for your concern.

• When I use my super disc to DVD recording, he plays on my IMac, but not on my dvd player.  I'm something wrong or just not do something?

  When I use my super disc to DVD recording, he plays on my IMac, but not on my dvd player.  I'm something wrong or just not do something?

  what you save? How do you save it? What format? what application? what you're trying to read on?

• My DVD works on our television screens, but not on some of our friends in televisions

  My DVD works on our television screens, but not on some of our friends television screens.
  He plays a photo then restarts and then plays two photos then restarts then plays three photos then restart etc etc..
  What is a parameter when creating the video to digital photos or a parameter on television of our friends?

  It has nothing to do with the connected TV!
  It s is the DVD drive!

  Some players can't handle all CD or DVD! Which is one reason why the created image DVD does not work with the friend (s) disk drive.

  You will need to test various DVDs of different drive manufacturers. Some discs are more compatible as other drives

• Re: Satellite M70-339 DVD movie disks but not recognize Virgin DVD or CD?

  Hello

  My Toshiba Satellite M70-339 recognizes the DVD movie but not blank blank DVD or CD discs.
  It happened some time ago and I'm ever round to sorting. INE day that only, it has stopped working.

  I have since reformatted all the computer several times, but it has never begun work again.
  I can watch a movie, a DVD OK, but when I try to burn anything to a DVD or CD, it don't think that there is a disc in the machine to engrave on Virgin.

  I tried the software built into Windows XP, burning CD and it does not work, nor does any third-party CD or DVD burning software.

  Just to reiterate, I want to be able to burn the files to CD/DVD again.
  Can someone advise?
  Thank you

  Windows XP Service Pack 3
  1.70 GHz Pentium
  1.99 GB Ram (upgraded self)
  Carpet * a DVD-RAM UJ - 841S internal DVD Multi Recorder

  Hello

  Check this box:
  Remove the drive CD/DVD from the list of Device Manager.
  Go to the registry and remove the filters above and below the following key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Restart the unit.

  By the way; I also recommend trying different disks, CDs and DVDs from different manufacturers. Discs R TDK is a good brand and good qulaity I use this and I m satisfied

• Equium L20-264: CD/DVD player can read but not burn discs

  Hi all

  I need help. My laptop cd/dvd driver does not recognize the discs inside. It only happens when I try to burn a disc. She can read but not burn the discs. What could be the solution? I tried different brands, the last time it was Maxell. The manual suggests Mitsubishi discs, but I'm not sure that it only works with the Mitsubishi discs. It can read any kind of disc.

  So I'm in trouble, please help.

  THX
  Gabor

  Hello

  In the manual, you will find a list of media recommended because this media has been tested and were working properly.
  However, I use TDK CDs and DVDs and it works as well.
  Juan suggested in another ad that sometimes 3rd applications or DVD copy locks are responsible for some driver problems:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12497

  What I mean is that it is not easy to give a generally the solution of these problems.
  You should try different media, burning software and if it doesn t work so it s is a malfunction of the equipment. In this case, you will need to replace the drive.

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• DVD burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  VDs that I burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  I'm using an iMac with OS X El Capitan 10:11.1 and iDVD 7.1.2.

  You use DVD + R disks?  Those who are not compatible with DVD players before 1997.  The DVD-R is compatible with all DVD players.

  

• DVD/cd in Windows XP player plays but not files

  My dvd / cd drive plays but not record. The safety tab disappeared from the properties box. Normally, when you right click on the drive to open the properties box, there should be a 5th tab at the top that says record but this tab is not launched. He disappeared.

  Hello

  · What is the number and the model of the CD/DVD drive?

  You can follow the steps from the link: CD - R or CD - RW drive is not recognized as a recordable device: http://support.microsoft.com/kb/316529