DVDRW driver is corrupted or missing

Similar Questions

• my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Satellite C660 - Dvd drive driver is corrupted or missing

  Hello
  I'm looking for a link to a dvd driver for my
  Toshiba Satellite C660, PSC1GA - 01E01M

  TSST corp CDDVDW TS-L633C CD/DVD ROM DRIVES

  I tried to play a dvd for my daughter and my Dvd does not auto play and has not been listed under my computer as a device. I looked for the problem in the control panel and found the

  "Windows cannot load the driver for this hardware device, the driver may be corrupted or missing.

  I tried to look for a driver fix my problem but they are all that I still find downloads to repairers of driver or updates that want money to solve the problem. I have had my laptop for a year and purchased with an extended warranty. It was the first time I tried to play a dvd on it. My daughter was so disappointed.

  Any ideas?

  Concerning
  BB

  Stand by.
  Optical drive is listed in windows Explorer?
  What is the status in Device Manager?

• I have a Vista system and my cd/dvd device driver is corrupted or missing (Code 39).

  How can I recharge the device driver? Whenever I have to uninstall the driver and the system tries to install the driver, I get the message that is damaged or missing.  How to solve this?

  I tried deleting the cdrom.sys file in windows, but it won't let me even if I'm on the administrator account.

  I also tried driver uninstall with the installed drive and rebooting, but the corrupted message driver happens every time that I reboot.

  Is it possible that the drive itself is the problem?

  I'm ready to get an external cd/dvd drive.

  Try running the Fixit from here:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  "Or you can try the procedure in.
  Fix it myself

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my dvd drive has stopped working. says windows cannot load the device driver, can be corrupted or missing code 39. When I search for updates, it says I have the most up to date. Help!

  drive is Matshita DVD-RAM UJ-850 s a SATA drive

  I use windows Vista

  Driver provider Microsoft

  Day 21/06/2006

  Version 6.0.6002.18005

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• ' driver may be corrupted or missing (code39).

  New computer, the CD ROM won't work, troubleshoot-performed and received this message "driver may be corrupted or missing (code39). device checked and see two 2 drivers, one for; DRIVER\CDROMSYS and the other for;  DRIVER\PXHIPA64SYS.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable
  or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even
  If there are 'old', you can reinstall. Many use Windows default drivers, but a few will be
  have more special. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I can find driver for my dvd writer dose not work Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) _ dvd writer ad - 7530 has ata thanks

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Equium L20: Lost CD/DVD drive - driver may be corrupted or missing (Code 39)

  I just lost the driver POINEER DVD - RW DVR-K16S. For some reason, it's a troublesome TI since im doing a computer course, I've been online and can not find the driver at all, I tried also to update via Windows and nothing. "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  This is the message I receive via the Device Manager. Any help or pointers as to get this driver greatly desired. I can load the driver myself i just have to find it. The driver disappeared after apron anything malicious on a CD.

  Thank you very much

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  It should work! ;)

• No sound on Equium - driver corrupted or missing (Code 39)

  Hello

  My name is Fanta.
  I recently wanted to play music on my computer using windows media player, but no sound from the speakers of the laptop, I checked the Device Manager and there is a sign less next to the audio, video recorders and game when I scroll it is a yellow circle with an exclamation mark next to the audio device «Microsoft kernel wave mixer» When you try to play music my windows media player 11 it is said
  "Windows media player cannot play the file because there is a problem with the audio device. There may be no audio device installed, it can be used by another program, or it might not work properly ".

  When I try to uninstall the device and then analyze installed again it gives me an error message
  "Windows cannot load the driver for this device for this device, the driver may be corrupted or missing. (Code 39) »

  Is it possible that I can do my speakers work again if so how?
  Thank you Sam

  Hi Kamal,

  If you had a tools and Utilities CD that came with your laptop then I suggest that you check to see if it contains the necessary drivers and utilities to support for your sound card. Alternatively, you can be able to download the forms from the download from Toshiba site. You will need to specify the number of the correct model for your laptop.

  Kind regards

• Equium L20: UJ - 841S drive may be corrupt or missing error code 39

  Hello

  I have an Equium L20 and CD/DVD does not work.

  I had a quick glance and says windows Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Firmware for Mat * a UJ - 841 S!

  Thank you.

  Hello

  I assume that drive is not displayed in Windows Explorer. Am I wrong?

• Satellite P30: The driver may be corrupted or missing (code39)

  Hi, I tried to play a game this morning to discover that I have apparently not a DVD player!
  I went to the device manager that has a yellow exclamation mark on the disk.
  I clicked on properties, it says: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code39) »
  I tried to update the driver who couldn't, I also tried to roll back only the pilot but could not.
  I tried to uninstall the drive from the Manager of devices and reinstalling that also failed, I also tried to download the driver from the Web from Toshiba site, but it did not help.

  It started this morning, watched a DVD last night, it was fine, I don't really know what happened!
  Anyone know what could be the problem?

  Reasons for this error include a driver that is not present; a binary file is damaged; a file I/O problem or a driver that makes reference to an entry point in another binary file that could not be loaded.

  Uninstall the form driver in the Device Manager and after reboot click on search the hardware changes to reinstall or upgrade the driver.
  On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.

  Also try this:

  There are 2 reg keys that can screw the device... Remove them both and restart...

  The keys are:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro {4D36E965-E325-11CE-BFC1-08002BE10318}-«l\Class\ Upperfilters"and"Lowerfilters ".

• Satellite A210: ODD does not work - driver may be corrupted or missing - Code 39

  The STRANGE ('TSSTcorp CDDVDW TS - L632H ATA Device") does not work on my laptop more.

  In Device Manager, the Properties dialog box says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  laptop: A210
  OS: Vista 32 bit

  I think the material is OK, as I install dual-boot linux, the STRANGE works very well under linux.

  I found updates of firmware STRANGE on the Toshiba site, but these cannot be installed with the drivers dysfunctional.

  Is it possible to find the drivers somewhere? (I can use google, but I don't know if driver download sites are trustworthy).

  Any other ideas?

  Hello

  This has been discussed a lot of time here;
  The workaround is;
  -remove the ODD of Device Manager
  -access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -restart the laptop

  Good bye

• Device driver Matshita DVD - RAM US890AS corrupted or missing (code 39)

  My DVD player does not work and I get the following when I try to update the driver: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).  Any suggestions?

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you to follow the links and check out them.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-us

• COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Running Server 2003, Web Edition SP2 Build 3790.

  The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

  Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

  Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

   

  Diana

  Microsoft Answers Support Engineer