DW CC will not let me choose the option "highlight invalid code.

Similar Questions

• "System Restore disk will not let me choose an option but" Exit ".

  My Acer Aspire 5553 happens to start with "the operating system not found", I put in the restore disc and it happens to restore to default options or restore data, I want to restore with data as my computer has documents College very important about this, when I insert the disc in the drive, it loads the options but only allow me to click on QUIT I tired pressing the arrows navigation and assistance of the touchpad, with nothing I can choose another option, that can do that I really need work ASAP, I unfortunately can't afford to send to a repair shop.

  Hi RiEvans,

  Since you are facing problems to use the restore disc Acer Aspire and choose options to restore the computer, you must contact Acer support for additional help.

  Acer Support community

  Hope the helps of information.

• The device independent Postscript file will not let me choose the format of paper or output options

  I am trying to output separated PDFs from InDesign (Mac OS 10.8) CS6. My only output options are a laser printer that can actually produce 2 pages on a single document or a device independent postscript file for which all output options are grayed out.

  I used to do all of this from a previous version of InDesign using the plugin Adobe PDF as the PPD, with Acrobat Pro has been installed, but I have the latest version of Acrobat Pro, and that no longer works.

  (If you know ' why the PDF previously separated: the driver to press the company that prints our book was never able to determine its RIP settings to save me from this nonsense without end.)

  You can get the PPD 9 Adobe InDesign CS6 optionally print but not sure it will work on Mac 10.8, follow the below steps and then check: -.

  1. Quit InDesign.

  2. Navigate to/Applications/Adobe Indesign CS5/Presets /.
  3. In the Presets', folder create a file called PPDs (the name of the file is case-sensitive).

  4. Control-click on the following link and choose Save link under download the Acrobat 9 PPD:

     Acrobat 9 PPD

  5. Place a copy of the PPD downloaded into the folder created in step 3.

• Will not let me choose the volume in the tab area of Notification

  My Mixer volume in the taskbar disappeared and now I can't access it. When I go to the properties of the taskbar and go to the notification tab he'd let me select volume that it is grey. My speakers are plugged in and turned on both power and computer and use to work before, so I do not understand what caused it.

  Maybe this article would provide a few ideas:

  Vista - Notification area - system icons
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• Oracle Data Modeler 4.1.1.888 on macbook pro 15-inch will not let me choose the relationships on the model.

  Hello

  Can someone please give me an idea why the following happens?

  I have two machines:

  iMac 27-inch with El Capitan, java version 1.8.0_60

  MacBook Pro 15 inch with El Capitan, java version 1.8.0_60

  I use Oracle SQL Data Modeling 4.1.1.888 in both entities.

  In the iMac, I can change the relationships on the relational model, but I can't select them visually in the macbook only through File Explorer.

  I'd appreciate a comment or an idea about this problem.

  Thank you

  Hello world

  There seems to be a problem with the retina display and the only way to get around for me was to install an app that changed the screen resolution.

  View menu

  Hope that someday will solve this problem.

  PD.

  Once you change the resolution it looks a little bit fuzzy, but it's nice to be able to select the relationship.

• Illustrator CS5 will not let me choose the width of the line: < 1 pt?

  All I want is to set a width of 0.25 pt line. When I select it, it just goes back to 1 pt. What gives?

  b,

  You may have to align on the pixel grid checked in the transformation Panel. It should be checked in new documents, outside those created for the Web and Flash Catalyst.

  Another possible reason could be something with the language setting; Obviously this is excluded if he worked previously.

• Satellite L850 - Win8.1 will not let me install the chipset drivers

  Hello

  After I've upgraded to pro 8.1 windows 64 bit 64-bit windows 8 (preinstalled), I thought that windows will not let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64-bit), but they stay with windows drivers installed for them.
  The Device Manager displays all installed and properly using. In addition, during the implementation was executed to install the chipset driver, he skipped most of them, to install a missing driver only (unfortunately have not kept any screen to show). I tried to install using the Device Manager (automatic search or manually navigating the computer files downloaded from the site), but it keeps saying that the drivers are up-to-date (drivers with the version from 2006, when later seen on the site are 2014). Any suggestion what to do?

  Model name: Satellite L850-1MK
  Version of the operating system: Microsoft Windows 8.1 Pro 6.3.9600
  CPU: Intel (r) Core i7-3630QM cpu @ 2.4 GHz
  GPU: AMD Radeon HD 7600M

  Hey... good news.
  Thanks for the comments.

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.

• Hotmail will not let me delete the account

  My hotmail account is sending spam messages. I went on the account to delete it asked to cancel all subscriptions and billing. I clicked on the link and he asked me to go check if msn has subscriptions, I did nothing. It will not let me delete my account, but he always tells me that I have subscriptions. I need to delete this account as soon as POSSIBLE. Does anyone else have this problem?

  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• My Windows XP pro would not let me change the option 'Use the home screen', so I removed a vital .dll file. I can't start Windows now!

  My Windows XP pro would not let me change the "Use welcome screen" option under: user accounts/change the way users connect or power off.

  He gave a message to the effect (I forgot to write it!) "a recently installed program does not change this setting. Search in the file named "RtlGina2.dll for a clue. So as silly as I can be, I did a search, finds the file RtlGina2.dll in the Windows/System32 folder and cut and paste on my desk. My thought was to isolate this file to see if it will address the problem of not being able to change the option use Windows screen.

  Now, I can't run Windows! It gives a message that this file RtlGina2.dll is not found! Specifically, it says, User Interface failure. The UI for logon RtlGina2.dll DLL failed to load. Contact your system administrator to replace the DLL or restore the original dll.

  How can I replace the dll if I can't even get started? Help, please! I know just enough to get me in trouble I see.

  WyoPathfinder,
  Are you able to boot mode safe mode with command prompt?  If Yes, then you can search for the file "dir /s /a RtlGina2.dll" lists the location where you moved to.  Then you can just copy (path\filename) c:\Windows/System32\(filename)

  If you do not work in safe mode, then you can boot from a XP disc and go into the recovery console and do the same thing.

  Hope that helps. QQ learn manage!

• Windows 8 will not let me move the AppData\Local folder to new drive

  All,

  I wanted to get my user account files from C drive which is a smaller SSD drive at most of my hard drive. I encountered several problems.

  A lot of trial and error, I was able to move each file of folder of the user account to an identical structure on my drive D (a "spinner"). Once I worked on all the kinks, everything worked without problems.

  However, I was unable to move the hidden AppData folder. I discovered there are three subfolders: roaming local and LocalLow. I was able to move LocalLow and roaming without problem. However, Local gave me problems.

  I discovered that the Local had some folders and files under it for which I have no permissions. Once I gained permissions for them, I thought I was on my way. The command to move the folder (using the Properties dialog box) has started working on the transition of 79 000 files. He moved all but 19 of them. He choked on all 12-15 files that have been opened and used by the system and the balance of the 19 had too long of a file name. So, I was disappointed.

  I then decided to create another administrator account and the sign of the current account and connect to the temporary administrator account that I had just created. I thought that I could then move the files because they would not be opened and used by the system. But, when I open the Properties dialog box, the LOCATION tab was gone, so I could not move the files.

  I need answers to two questions:

  • Why Microsoft would give the user a LOCATION tab with a NAVIGATION button, if it was impossible to move the AppData\Local folder?
  • Is there another way that a layman like me can change this setting? Can someone direct me to here? (Such as it is, 2 of the 3 AppData files are on drive D and 1 is always the SSD C drive.)

  Thank you.

  Matt

  OK, I fixed using a symbolic link. I moved my complete record of users. Here are the steps I used:

  • Create a folder on the "C" drive, called "this_is_c" and create a folder on the disk "D", called "this_is_d" - it is only for identification purposes in the later stages.
  • Boot from the Windows 8 Pro disc. (In other words, will not start hard drive.)
  • Do not choose 'Install now' - choose ' repair you computer.
  • Then choose troubleshooting
  • Choose Advanced Options
  • Then choose command line
  • The player that appears corresponds to the player 'X' - which is the recovery disk.
  • Type "C:" to switch to the 'C' drive
  • Type "Dir" and see if you see the folder "this_is_c".
  • If you do not, continue to change letters until you see this folder.
  • It worked that the 'C' drive during this "repair" was maybe the same as my 'C' drive when I boot normally.
  • Find the "D" drive through the same process - that is, try to find the folder "this_is_d".
  • It worked that the "D" drive during this "repair" was maybe the same as my "D" drive when I boot normally.
  • Type this command: xcopy/e/k/o/h/b c:\Users d:\Users see the next chip
  • First drive name must be the name of the drive as the "repair" attributed to your normal boot drive 'C '. The second disc should be burned as it would be during a normal boot. So, in my case, these conditions were the same. Note: use a capital 'U' for users instead of lowercase 'u' in users.
  • Type "D" when prompted.
  • Type the following command: rd /s c:\Users
  • Type this command: mklink /d c:\Users d:\Users
  • Type this command: exit
  • Continue to start.

  This will create a symbolic link that will redirect all actions to or from users on 'C' folder in the new folder users on "D". In regards to windows system knows, he is still sending the disk of 'C '. It is just redirected.

  This works perfectly for me. I installed apps and run programs without problem.

  It's a sort of understand. But it works for me.

  Matt

• Apple ID will not let me update the apps

  So it shows up on my history of credit card that apple itunes billed me twice for a use that I did not and after that the payment was made, identifying Apple wouldn't let me update my applications saying that card was denied for some expenses they already did... it's weird, because the card has sufficient funds and the costs of application apple ID were made without me by using the service. What should I do? What's wrong?

  Try this:

  https://www.Apple.com/EMEA/support/iTunes/contact.html

• 'Internet security options' will not let me install the Sims 3

  I bought the Sims 3 today and when I put it in my computer to install it, a saying 'unable to open these files. Your internet security settings prevented one or more files being opened. »

  I tried to adjust the internet options security to lowest setting, but it did not help. What can I do else?

  Thank you

  If your using windows firewall... goto Control Panel > windows firewall > change settings > DESACT.

  If using your firewall software, then it depends on where the settings to disable the firewall.

  Once the game has installed switch back on the firewall, this should allow the firewall to accept the sims 3, if not you will need to go into the settings of exceptions and add sims 3 for her.

• will not let me run the updates so I can't even install norton

  loaded the only windows service pack for xp one, I had. but now won't let me run the updates so I can't even install norton. He says I need service pack 2 at least, but can no longer update this do I?

  I could ask why you are not being updated at least SP3, but I guess that's another story.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Virus will not let run me the system restore, and I can't understand how to run a system recovery because there is no return upwards for this computer. It's a basic vista.

  When the computer starts, it must choose to leave a program unknown to the system access everything else it shows is a black screen. When you click on allow, he pulls up a virus scanner that says he has all sorts of viruses, but the program is the virus itself, because this virus program is not really on the computer. When you try to run the system restore, it says that this option has been disabled by the administrator. Also, I can't find how to run a recovery of the system and start the computer to its original settings. Help, please. It's not my laptop which is having this problem, but my roommates computer. Thank you for your time, I've ran out of ideas and was seriously in need of a little help. I tried to repair the system running through prerssing F8 in the boot menu and has not worked. also try the system restore via the SafeMode command prompt does not work either.

  Download Malwarebytes' Anti-malware using another machine. Install it in the
  your roommate infected computer in safe mode and run. Accept all default settings.
  Don't forget to do a backup when offered. I hope you find and
  eliminate the infection.
   
  "crashbbandicoot" wrote in message
  News: 351ebb9b-60aa-47 d 2-9b 13 - e309f4ee035b...
  > When the computer starts, it must choose to leave a program unknown
  > access the system all that it shows is a black screen. When
  > you click on allow, he pulls up a virus scanner that says that there are all kinds of
  > but the virus program is the virus itself, because this virus program is
  > not really on the computer. When you try to run the system restore it says this
  > option has been disabled by the administrator. Also, I can't find how to
  > system recovery and boot the computer back to its original settings.
  > Please help. It's not my laptop that is having this problem, but my
  > computer of roommates. Thank you for your time, I'm out of ideas and
  > seriously needed a little help. I tried already running
  > repair system through prerssing F8 in the boot menu and has no
  > work. also try the system restore via the SafeMode command prompt has no
  > not work.
  >