Oracle Data Modeler 4.1.1.888 on macbook pro 15-inch will not let me choose the relationships on the model.

Similar Questions

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

  Hello

  I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

  Here are some technical details of my current system:

  -MacBook Pro 15 inch, late 2011 model A1286

  -OS yosemite

  -16 GB of memory/RAM

  -Currently using stock HD

  All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

  Thanks in advance for any help.

  You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.

• MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  The following is from http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i5-2.5-13-mid-2012-unibody-usb3-specs.html

  In addition, the 6 Gb/s it is SATA III

  Standard hard drive:

  500 GB (5400 RPM)

  Int. HD Interface:

  Serial ATA (6 Gb/s)

• Vista will not display description of the file on mouse over. File name, Type, size, and Date modified see the upward, but no description.

  Vista will not display description of the file on mouse over. When I mouse over, a pop-up window displays showing: file name, Type, size and Date of change, however, it does not show the description of the file.

  So, for example if I have 5 files on different types of screw - the description tells me that the size of the screws. IE. 1.5 mm or 1. 8 mm.

  Update: try to get the description of the file displayed messing around in the file properties, now out of 10 records, only 2 includes the name of the file in the mice on the pop-up window. So now what lack us, it's the file name and the Description file.
  Help, please...

  Description of the file in as long as this is not one of the available variables, which can be shown with ToolTips - but there are others who could easily serve the same purpose. Here are the options:

  Consulted
  Attributes
  Created
  DocAuthor
  DocComments
  DocSubject
  DocTitle
  Modified
  Name
  Size
  Type
  To write

  Here is an article on how to change what is shown. http://www.ghacks.net/2008/02/10/customize-windows-explorer-tooltips/ . It is to change the registry, make sure you so first back it up before doing anything so that you can recover in case you make a mistake (or do the right thing, but it does not work as expected). http://www.instant-registry-fixes.org/how-to-backup-windows-vista-registry/ .

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• Developer of sql Oracle Data Modeling-diagram er

  Hello
  I tried to Oracle sql developer Data Modeler to see the relational ER diagrams.
  Tables are entered data maker but indicated no relationship between tables.
  Like this
  How can show the relationships between the tables?
  http://I54.Tinypic.com/30wxq1e.jpg

  SDDM cannot create a diagram with only simple table definitions. It requires primary keys (PKs) and the foreign key (FK) to be defined first. My guess is that you've imported these drawings from an existing database table. If so, this database does not contain these constraints. (I found this to be a problem in many organizations over the past 20 years - including my current job). You will need to determine:

  1. the PKs for each table (whether via the data profiling or to talk to someone who 'knows' what they are supposed to be, or by reading the logic/code of the application used to manage tables).
  2. the FKs between tables. You may be able to guess some based on column names, otherwise you will have to understand (ditto)

  Then you can update the model in SDDM with PK definiions (manually). You must do this before you draw in the FKs between tables. Now if you want a real entity-relationship model, you must create a logic model of the relational model. SDDM utility to convert the tables to entities and the relationships FKs.

  I have the basic steps with screenshots described in a presentation I gave in Denver at the end 2009. It was an earlier version of SDDM but the basics are the same. You can find the presentation here: http://www.rmoug.org/QEW2009/SQL%20Developer%20Data%20Modeler%20 (2) .pdf. Starting on slide 12.

  HTH

  (FYI - I don't work anymore in this society so that the contact information does not more correct).

  Published by: Kent Graziano on April 25, 2011 13:13

  Published by: Kent Graziano on April 25, 2011 13:14

• I used the migration assistant to transfer data from my pc windows for my macbook pro, and it erased all my data. Is he here to retrieve these data

  I used the migration assistant to transfer data from my laptop to windows xp for my macbook pro OS X Yosemite 10.10.5 version and she erased all the data on my mac iTunes i.e., photos, documents, games, etc. Is it possible to recover these data or take it back to a State of pre migration? If not can I erase it and reload the software from scratch?

  Thank you

  Dave has

  You have a backup of Mac before moving the data from the PC?

• Data Execution Prevention will not let me turn off for nothing

  Data Execution Prevention (DEP) blocked one of my games to open. I followed the steps to turn it off, but when I get to the window with the option "Turn on DEP for all programs and services except those I select", it is grayed out and won't let me select it. I am the administrator (my account is the only one on this computer), so I don't know why it doesn't let me do. I have looked everywhere and can not find someone else with the same problem. I have Vista Home Premium, 64-bit, if that helps at all.

  Hello

  First of all, I suggest you to see if a Data Execution Prevention of the game compatible version is available by visiting the website of the software publisher. If the Publisher has not released an updated, compatible version DEP for the program, you can turn off DEP for the program that was closed. You will be able to use the game, but it might be vulnerable to an attack that could spread to your other files and game.

  I would suggest trying the following steps and check if it helps.

  Step 1: Open the elevated command prompt, follow the steps to open the elevated command prompt.

  a. click the Start button.

  (b) in the Start Menu, click programs principally made, followed by accessories.

  (c) in the menu accessories, right-click on command line option.

  d. in the drop-down menu that appears, click on the "Run as Administrator" option.

  e. If you have the User Account Control (UAC) enabled, you will be asked for permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  Step 2: Try the following steps to activate the Data Execution Prevention, using commands.

  a. in the elevated command prompt, type bcdedit.exe/set {current} nx OptIn and press enter.
  NOTE: If for some reason that this command does not DEP after restarting the computer, then use the command bcdedit.exe/set {current} nx AlwaysOn rather.

  b. you should get a success return message.

  c. close the elevated command prompt.

  d. restart the computer to apply.

  Note: Once you are done with step 1 and step 2, try to add the data execution prevention program and check if it helps to open the game or not.

  Hope the information is useful.

• My newly created model swatch will not be displayed in the swatch Panel

  I created a model of plaid and dragged to the swatch group. When I tested, I realized there is some error so I deleted the swatch in the swatch Panel, then edited my original (created a bounding box with no fill, no stroke and sent to the rear). When I try to drag the new model highlight in the swatch Panel, this time that it will not be displayed; But if I create a new shade of single color it will be. Help!

  I had the same problem, but the answer by Monika helped me to understand the problem: I divorced from all elements in the model, then checked each one in the appearance Panel. I discovered that I had inadvertently forms filled with a pattern. When I deleted all those unwanted models of each shape and banded everything, I could record the reason as a sample.

• CC2014 AE will not let me select individual/collective points mask or limits on a pre comp and so moves the model together or ladders (depending on where I clicked of course)

  I'm working on a project that requires a style similar to securities "Criminal Minds Suspect behaviour" . I'm precomping photos so that I can make in a separate model but then placing these comps pre into a master publication where I use the camera and the masks to reveal the images in the required order. I'm having a problem of selection of the mask points. It was working fine without any problems earlier today, but now I can't select single or collective of a mask or a border of a points either. What happens when I try, it's just moves or the scale of the model completely and ultimately the mask is useless because I can't animate it in all. I hope someone can help! I reported it as a bug to Adobe, but because I am unaware of the process that causes the I'm afraid that they won't get back to me. Help or troubleshooting tips would be amazing! Thank you in advance!

  Looks like you need to adjust the masks in the nested compositions, but you try to do it in the main computer.  Not good.  Nothing happens.  Do it in the nested compositions.

  And if you do so, it also resembles spend a certain time of quality here will be VERY useful:

  Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

  It is better to learn AE of Pros instead of a high school kid with fragmentary knowledge of AE on YouTube, you know?

• Store shared data will not be displayed in the laboratory Manager

  I have a shared data store that is fully recognized by both my ESXi hosts in pointing that client vSphere vCenter Server. I can browse the data store, download files, delete files, but not even opinion in Lab Manager. I tried to remove and re-add the data several times store. using a different initial host each time. The data store is picked up again by the two hosts and its status shows as usual in the vSphere Client. No matter what I do well, I can't make it appear in the laboratory Manager. Does anyone know where I could go wrong?

  Thanks for your help,

  will be

  You don't want to say that in the resources tab Datstores, you do not see this at all shared data store? You are in global org global org or not? What version of LM do you use?

  If you are in an organization overall, newly added data store should appear immediately. But if non-global organization, go to the Organization-> properties-> data warehouses and add this new data store.

  MoHA-

• NightHawk R8000 - will not let me register as saying invalid purchase date

  I was wondering if anyone knows why this would occur and how to fix it.

  Hi Griffinz,

  I suggest that you contact to register for your device.

• Windows Explorer error 0x8007007A: "the data area passed to a system call is too small" and will not accept simple word doc to a new file

  I have seen questions about this error in Re (with no response) Task Manager, but it popped up just for me just trying to move a document to a new file (file) in Windows Explorer.  I'm not a techie.  I use a new Windows 7 laptop, networked with a desktop computer running XP - live files on the XP, so I guess it's an XP issue.  The file tree is quite long. I tried to delete and recreate the folder.  No luck.   New - I got a few word documents in a folder, I created a folder under the original, tried to move word documents & PDF files in the folder and suddenly get this error.  I created thousands of new records - never saw this before.

  The previous times I've seen that error (regarding printer installation issues or Scheduler tasks), if seemed to be linked to a care/firewall Windows. Just to smile, have you tried to disable any software firewall/security (temporarily) and see if that makes a difference.

  BTW, it's a new show (as a few update/install can be causing it) or always happened?

• Vista boots up to a temporary profile, will not save all the data and will not let me access my saved info. on the hard drive.

  Windows boots Vista on the rise after an error message and leaves me only to use a temporary profile. I can't record anything I create in the session. I can't access files that I have already created on my hard drive. My laptop did not come with discs, and I have no backups. Y at - it a fix for the problem of temorary profile? I know from talking with a friend I need to get a backup in place system.

  Hello

  Using the hidden administrator account (or any Admin) will allow you to access all the files on the computer.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.