DW CS3 does not work on Vista Business

Similar Questions

• Satellite A300D-158 illumination button does not work on Vista

  Buttons light Toshiba does not work under Vista.

  I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

  When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
  Illumination power button is not working do not by the press.

  This means support to toshiba button does not work properly with vista.

  I don't have these problems with XP

  Hello

  As far as I know, you can enable and disable the lighting in the BIOS.
  Go to BIOS and check if you can activate it.

  By the way; you said that buttons don t work with Vista.
  Have you tested this with Vista OS preinstalled Toshiba?

  You should do this!

• Zoo Tycoon 2 does not work on Vista 64 bit Ultimate

  When I start the game it gives an error saying that I have 0 MB of RAM installed.
  I also have a stub GPF.

  I tried to turn on DEP for all programs and added ZT.exe in exceptional cases.
  I edit "MSCONFIG" to show only 2 GB of ram.

  The issue of ram 0 MB goes, but I still I get a stub of protection error when I start the game.

  The thing is my old Zoo Tycoon 1 full collection works very well.
  ZT1 was released around 2001-2002. Whereas ZT2 came out around 2006.
  How can and more old-fashioned work fine but not the new version. I expect it to be the other way around.

  Someone at the helpdesk said MS the ZT2 game does not work on Vista 64 bit and I should install a virtual machine so that it can work in 32-bit.
  Is really the only way? Help, please.

  Hi orbit17,
   
  Thanks for posting on Microsoft Answers.
   
  Try to turn on DEP for "Windows programs and services only" and then restart the computer and check with the game.

  Here is a link to a KB which deals with the minimum requirements of the system and the compatibility problems with Zoo Tycoon 2: http://support.microsoft.com/default.aspx/kb/889368

  Please make sure that your computer meets the requirements for the game and that your computer is compatible

  Also how much RAM do you have installed on the computer?
  Did you add extra RAM since the purchase of the computer?

  You can also try to run the memory diagnostic tool by using the Windows Vista DVD.

  I hope this helps.
  Kind regards

  Niranjan | Microsoft Answers Support Engineer

• My microphone does not work on vista?

  My microphone does not work on vista? WATS the problem

  Hi AhsanShah,

  1. What is the brand and model of your microphone?

  2. what happens when you try to use the microphone?

  3. you receive messages or error codes?

  4. were you able to use the microphone before without any problem?

  5. you will remember to make changes to the computer before this problem?

  6. are you facing problems with other audio devices?

  You can check out the following link and check:

  Connect one microphone, music player or other audio device to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Hope this information is useful.

• Windows Easy Transfer 7 does not work on Vista

  Try to migrate date files and the configuration of Vista Home Premium (32 bit) to Windows 7 Home Premium (64 bit), Windows 7 laptop says to use a new version of Easy Transfer, tried to install that but it does not work. Starts then just seems to close, without indication of the error.

  Hi boris99,

  You can see the following thread, which presents a similar problem discussed.

  Windows 7 easy transfer does not work on Vista Home Premium 32

• Built an MSI that does not work under Vista but works under XP

  We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

  You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

  MSDN forums - http://social.msdn.microsoft.com/Forums/en-US/categories MS - MVP - Elephant Boy computers - don't panic!

• Satellite A200-1AX: many applications does not work under Vista

  Greetings,

  I bought A200 1AX a few days ago and I'm not having a good experience with regard to the installation of applications on this Vista box. Even install yahoo messenger did not work and produces the NSIS error. 3D max 9 installation does not work (even though some have managed to operate); Install Adobe CS3 (supposed to be for Vista) did not entirely - the photopshop component have not installed, etc.

  The bottom line, I plan to move to XP OS. Means the required BIOS update I have my Vista recovery CD will NOT work after the switch to XP?

  Thank you for your feedback.

  Best regards, Ashraf.

  Unfortunately I put t know how to help you.
  Usually, if the 3rd party applications are designed and support the Vista while there should be no problem with unique program facilities.

  Check if all software packages are completely cared for and compatible with Vista.

  > The necessary BIOS update means that I have my Vista recovery CD will NOT work after the switch to XP?

  No, after the update the BIOS of XP, you will still be able to use the Vista CD from recovery, but perhaps some functions such as the FN keys will not work.

• Touchpad does not work under Vista - Satellite A110

  I installed Win Vista business on Satellite A110...
  I downloaded the alps touchpad drivers: the drivers are installed, but it does not work!
  Is this a known issue? I did something wrong?
  Thank you

  Downloaded the correct drivers for your computer? Sometimes the machines appear to be similar, but then they have different hardware...

  Your touchpad has a function before?

  Welcome them

• TEMPRO does not work for Vista Ultimate x 64

  Hello

  I have a Qosmio F50 - 10K and I installed Vista ultimate x 64 and the Tempro application does not work. After I installed, I left the start Tempro button checked and when I press finish it gives me this error:
  "internal error 2753.
  Toshiba.UI.controlpanelapplication.exe ".

  Same thing happens when I uncheck the box with start tempro.

  In both cases, nothing is left in the system, no files, no regstry, nothing.

  Help, please

  Thank you

  Hello!

  I searched on the Toshiba driver download page and I discovered, Tempro is available for Vista 32 bit and not 64 bit.

  I think so Tempro will not work on a 64 bit OS.

  Bye!

• Keyboard does not work under Vista on Satellite L300D

  Dear readers,

  I have a Satelite L300D with Windows Vista 32 bit Home Premium. It is about 5 months and so far I have not had problems.

  Today, I started the book and noticed that I was not able to type my password for Windows.
  I thought, there must be a problem with the keyboard and restarted the laptop.
  I tried to enter the Bios and I wonderd, keyboard worked as expected it. Back to Vista, the keyboard does not work yet.

  I rebooted again and activated Capslock befor the Windowsstartup and looked at the LED.
  Just after the appearance of the Windowslogo, Capslock off a keyboard was dead.
  So I thougt it must be a driver error. I deleted the two driver files Hardware-Director told me where the drivers keyboard, rebooted twice a keyboard had returned to work, but only until the next reboot.

  So I decided to make the recovery of HARD drive and reinstall Windows, thinking, this should fix the problem.

  But it's still there.

  Is there someone who could help me? If this is an error of the driver, is should have disappeared when the laptop is in a State of delivery, right?

  I would be very happy for any advice or help

  Greetings from Berlin

  Thomas

  PS: I want to say sorry for my bad English... :-)

  Hey mate

  > It's about 5 months and until now I didn't have problems.

  I wonder why this keyboard problem happened after 5 months of use?  :|
  This means that this keyboard worked fine using the Vista and the Toshiba Recovery disk operating system but recently stopped working if the Microsoft OS is running.

  In my eyes it s a hardware issue ok, it s really strange that you can use it in the BIOS and the Linux system. But I recommend to contact the ASP (certified partner) in your country and ask if the technician could test with the new keyboard.

  I think that your warranty is valid and therefore everything must be covered by the warranty!

  Good luck

• Scanner does not work with Vista Windows Equium A210-171on

  I have a Toshiba equium laptop (Vista)
  I am wanting to buy a scanner so I can scan documents to computer. (I have an all-in - one but the scanner does not work)

  Please indicate where to go?

  Thank you

  Hi Suzanne,.

  Sorry, I Don t understand why you want to buy a new scanner. First of all, it would be nice if you tell us what satellite you have. Other useful information would be exactly, what does NOT work on your satellite and your 'all-in-one '...

  Please provide more information on this subject and maybe you shouldn't buy a new scanner.

  THX

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• Windows Update does not work under Vista

  Hello! I have Vista Ultimate 64 bit and a few weeks ago, I noticed that my windows updates had stopped working. I followed the instructions to do a repair of my drive, but got "the upgrade is not available. Press Cancel and then select upgrade to a newer version than what you have "." However, there is nothing that gives me this opportunity. How am I supposed to fix it then?

  I have a feeling that this happened after a service pack has been installed (3?), but as I put it to the automatic updates I have not noticed exactly when he had ceased. I'm frustrated and very frankly also irritated. I paid a fair bit for Vista Ultimate and I'm basically says my drive is useless. I ran the Microsoft Fix It, and he said he solved the problem, but it didn't. I also did a system restore and that do not also not fixed the problem. The error code I get whenever I have try to do an update is 80070490. I saw a lot of messages from people having this same problem, while searching for a solution, so there's obviously a problem somewhere I would appreciate to help get it sorted please.
  Thank you and best regards,
  Sharon

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  or

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

• HP4050 does not work with Vista.

  I did all the uninstall/install as shown in several places and nothing won't print. I get just "printing error" in the status area.

  This worsens the problem as it used to work fine. It got to where I could unplug/plug in the printer so that it and the laptop, or restart the laptop and the dependiing overnight, one of them would solve the problem. Then, it is to reinstall the drivers, and it worked for a while before returning to the steps of the power.

  Now, it does not matter. No printing. No "job processing" flashes on the printer, only "printing error" when I opened the Printers folder.  I'm on the good (and default) printer and the correct port. All connections are good and the printer works on an old laptop w / XP and ALLOWS to work on my other laptop, also with Vista. Now it does not work it reliable either.

  Using the correct driver for Vista 32-bit, so it isn't.

  It is a great printer and buy another isn't on the horizon of affordability.

  Hello

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Printing problems? Try the Windows HP Print Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02726548&cc=us&DLC=en&LC=en

• Magic jack does not work on Vista

  Please help, I have tried everything with the Magic Jack support team and has even received a replacement and it does not work with windows.
  What can I do to fix this and get my Magic jack to work?

  Hello, Ray

  I'm moving your post on the Windows Vista Hardware forum.

  You may need to be upgraded, refer to the Windows Vista of the MagicJack Customer care site section: http://www.magicjack.com/2/customercare.asp

  I hope this helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.