DW to use the mouse on the button images, but will not validate
Hi all
I did this three times and give up. Here is the link http://pooledesignstudio.com/wendysawesomeart/
I used the common Image rollover on the toolbar icon and created my navigation bar.
When I try to post I get a 24 error and they are in the code that generates the DW to get the switchout reversal. I have no idea how to solve this problem.
Help, please.
Thank you
KathPoole
The simplest solution is to change the DOCTYPE.
You use a transitional DOCTYPE XHTML.
If replace you it with a HTML5 DOCTYPE
you will eliminate most of these 'mistakes '.
Tags: Dreamweaver
Similar Questions
-
My firefox is the latest version, but will not update
My firefox is the latest version, but will not update
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
-
Icons wiggle and move in the home screen but will not go to the next page
Icons wiggle and move in the home screen but will not go to the next page
You need to move to the edge and hold the button for a few seconds so he can move to another screen.
-
The title says it all really.
I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.Help, please.Thank you.original title: vista detection network but will not connectHi JulianBeach,
1. you have made no changes to the computer before the broadcast took place?
2. What is the exact error message you get?
3 is connected to the domain of the computer?
4. what happens when you try to connect to the network?Try the steps from the following link:
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsAdditional information:
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions -
Dell 1230c do not - print jobs go to the queue printing but will not come to buffer
Dell 1230c do not - print jobs go to the queue printing but will not come to buffer
Hey Joe,
Try duration to remove print jobs to remove Job feel stuck in the queue, and then restart your computer.
Also refer to:
Cancel printing
Maybe you have that impression break.
View, pause, or cancel printing
You can also see the troubleshooting steps in Dell for Dell printers.
Please post back with the State of the question.
-
Everything was going well until I refreshed Firefox. Since then, the address bar does not work. If I type in a website or attempt to use the drop-down menu to access a previous site, the site loads but does not "join the service or go the arrow." It is used to automatically load, now it won't load at all! I am running Windows XP
You are running Firefox in compatibility mode for Windows 98 (NT 4.10) according to the user agent.
- Mozilla/5.0 (Windows NT 4.10; rv:36.0) Gecko/20100101 Firefox/36.0
Make sure that you are not Firefox running in compatibility mode.
You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
Make sure that all items are disabled in the tab "Compatibility" in the Properties window. -
I have the new series g of HP Pavilion... running windows 7. installed HP office jet J4680 and works through usb cord but will not work as wireless... will not be in place.
You are running windows 7 starter edition?
-to know
-Right click on computer
-Select Properties
-Look for the system type
Also, what processor do you have?
-
Gadget screen appears on the home page but will not move anything to the homepage
Original title: you had to send a solution to my problem of gadget #1194371707
gadget screen happens on my home page but will not move anything on the homepage, you said you would email me a solution, but you responded never please, my case is 1194371707
Delwyn salvation,
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description, you are having problems with gadgets.
1. which browser is installed on the computer?
2. have you visited a support Chat or call?
3. What do you mean by 'will not move not anything to the homepage'?
Since it's Forums Community Microsoft, unfortunately we have not information on case # 1194371707
Answer to us if you are having problems with gadgets or any other problem of Windows, and we would be happy to help you.
Good day!
-
The button new message will not work in Gmail - it does with IE.
The calendar very high buttons disconnection etc., dial button, task and contact in Gmail buttons do not work. All other keys are working. All work fine when using IE. I updated Firefox 3.6.12. Deleted all cookies cached, etc. & restarted.
I've had about: config > dom.storage.enabled, for a week or so now fixed to false. There is no problem until the update of ff 3.6.12 yesterday morning when I started having the same problems as you all. I allowed all the scripts, the problem still persisted so I went back to about: config, enabled the true dom storage and voila, chat, dial began to work again. Just to check, I turned back on it to false, and it stopped working again. You can use the add-on betterprivacy autodelete cookies from dom storage, but it seems that google is no longer you can turn them off completely.
information on activation/say-enabling in firefox, this is for windows, but should be the same for other os: http://www.sevenforums.com/tutorials/106540-dom-storage-cookies-enable-disable.html
more about dom cookies: https://secure.wikimedia.org/wikipedia/en/wiki/Web_Storage
-
uunlocked iphone6 works on all networks 4uk but does not work on mobile thegy delight use EE network it shows 3 bars of signal, but no name even sim card works fine in my 4S but bearer of 6 sows not found mobile delight just advise manual setting of the bu AFN will still not be enabled?
any help appreciated MikeC
Contact the carrier. In all cases the pleasure is not a carrier official iPhone.
-
a pop-up message tells me I have insufficient disk space and free up some disk space so I run the disc to clean and it removes some of the problems. He jumps up all 2-3 days. I tried to defrag, but the error message says that I only have 2% of disk space and he needs 15% to defrag so it will not defragment. The band is red when I analyze the system before defragmentation.
a pop-up message tells me I have insufficient disk space and free up some disk space so I run the disc to clean and it removes some of the problems. He jumps up all 2-3 days. I tried to defrag, but the error message says that I only have 2% of disk space and he needs 15% to defrag so it will not defragment. The band is red when I analyze the system before defragmentation.
=================================
2% free space? You really need a larger hard drive.If you have programs that you do not
be a good idea to uninstall them, and if you have a
delete the files that are most important or
Save on external media such as CD, DVD, Flash
In the car, etc...
John Inzer - MS - MVP - digital media experience -
Pavilion g6: the screen flashes but will not stay
When you press the power button the laptop starts to power. A message "press the esc key to access the boot menu" flashes briefly on the screen, but the it turns off and remains empty. The laptop is continuing with its power in sequence and the screen flashes briefly from time to time showing what seems to be the boot sequence screens, but nothing remains on the screen long enough to see what is displayed. Then, the screen remains blank.
Hi there @NickRDavis,
By reading your post, I gathered that you see a black screen on your laptop HP Pavilion G6.
Before I provide documentation of troubleshooting, I would like to take a moment to welcome you to the HP Support community, where you can ask questions, find solutions and help others! To show your appreciation, please click the "Thumbs up" on this post.
Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems. So please try and connect an external monitor or TV to your laptop to see if the screen displays correctly there.
Have you connected the laptop to an external monitor or TV? Please try this step first to see if the display on the external monitor or TV is black too.
Have you tried running in Safe Mode?
Did you do a BIOS update?
Have you tried tests to hardware failures?
You have the phone broken?
What you sit your Notebook on when using it?
Did you do the updates using updates of Windows or HP Support Assistant?
Have you tried to clean up all the vents in Notepad?
Have you tried to do a hard reset?
Have you received any error messages?
You have beep codes or flashing LEDs?
Did you do a BIOS reset?
There is a document that has the reset steps, connecting steps an external monitor, BIOS reset steps and Reseating the Module memory he intervenes. The document is called black screen troubleshooting with no. Error Messages at startup or start-up. Here is a document for you have called the computer does not (Windows 7).
Here are a few other documents for you that can help:
If you manage to get the laptop lights using the troubleshooting links in the previous questions, please try a Test hardware. HP provides the diagnostic software that you can use to test the hardware components on your computer. to disprove or confirm the hardware failures when something is wrong.
Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Please consider tagging the post in order to resolve your problem as "Accept as Solution" to help other members of the community!
If you need assistance, I would be more than happy to continue to help. When you repost, please provide me with the detailed results of the above troubleshooting and your model number (How can I find my model number or product number?).
I hope this helps!
-
If I just powerdown (overnight), leaving a/c, connected, the cursor appears and moves, as my mouse moves. HOWEVER, if I powerdown and completely disconnect the PC, 110V, to keep safe from one close shot of lightning, THEN the problem appears. After the storm passed, I plug the PC into the 110 outlet, turn on the computer and restart it. The cursor appears in the center of the screen, but it will not move when I move my mouse. THE ONLY THING I can do is hit briefly, the power button to turn off the back and then click New to reboot (twice now)... then the cursor appears in the center of the screen and moves when I move my mouse.
Yes, I still think it's the battery. If the computer is turned off but still plugged into the wall, food always provides a small amount of power to the motherboard to keep a ready"" State. In fact, if you stop it, but keep it is plugged, you can send a packet to 'Wake-on-LAN' through the Ethernet that would then turn on your computer so you don't have to press any button at all. This requires that some things are always under tension even when the rest of your computer is turned off. Remove the plug from the wall removes this standby power and now the BIOS of your motherboard must hold his memory by falling back on the battery.
HTH,
JW -
I can't get rid of this pop up asking to restart or online solutions. I chose these two options in the last days and even managed to get into the restoration of the system (not easy without windows), but nothing works and I'm about to throw this pop up window with my laptop.
'
Hello
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
-
HELP file, place the Image but will not go
I converted a Word doc to html
to be able to file, place images in blocks of text in CS4.
When I file, place the image (was be a jpeg file), it placed, I turned and it reduces, but then it would not move.
How to become mobile if I apply skin?
If you place the image in the text block, so it is called inserted graphics and it doesn´t suppose to move around with the mouse more, it flows with the text.
It s like a giant letter in your text.
If you want to place your images in floating frames, Don t put them inside text blocks, drop them outside your page first, and then move them to the right places with the mouse or use X / coordinated in Control Panel.
If you have need of your images still flows with the text, use the object anchor instead of inserted graphs...
Maybe you are looking for
-
My iphone and itunes are both up-to-date regarding their updates, but my phone syncs with my laptop. I need help.
-
R7000 Nighthawk Firmware Version V1.0.6.28_1.1.83
Running the FW indicated in the title. What version should I run for performance and stability?
-
HP 110 Destop PC series: and a hard drive internal to a 110 hp
I have a HP Desk Top 110 series. I want to install a 2nd hard drive on it, but I don't see were I can fit another harddrive, the cords are not alow for a 2nd hard drive how do I buy for installing a 2nd HDD or even if a 2nd isgoign hard drive to work
-
HP ProBook 450 G1: SRS audio driver
Hello, I have recently reinstalled windows 7 and I'm trying to find the SRS audio driver, but I can't. Can you help me please with a link?
-
where are they? I cannot find nohing on the hp site Thank you