DWM.exe crash at startup.

Similar Questions

• Registry DWM.exe error at startup

  I get a registry error message whenever I start my desktop computer.

  The error message is: 'cannot load or launch 'C:\Users\admin\AppData\Local\Temp\dwm.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry. »

  This problem started after I ran SuperAntiSpyware. I tried to use CCleaner and Advanced System Care programs to fix this registry, but they did not work.

  How can I solve this error?

  I want to be careful to make changes to the registry.

  My PC is an HP m8120n under Windows Vista Home Premium desktop.

  Solutions:

  1. upgrade the graphics card drivers
  2 repair the registry
  3 run the 'Desktop Service Manager' Service
  4 disable the DWM. Boot to the EXE file entry
  5. run some commands
  6 analyse the system files for Corruption
  7 restore the system to a previous state

  Update graphics card drivers

  To correct this error, try upgrading your graphics card. Visit the manufacturer's Web site and download the appropriate compatible drivers for your computer.

  Or otherwise,

  1. click on start.
  2. type device manager in the start search box.
  3. press ENTER.
  4 expand your computer name, then the graphics card.
  5. right click and select the update option.

  Repair the registry

  Repair the registry by using a good registry cleaner software.

  Run the 'Desktop Service Manager' Service

  DWM. EXE error may occur if the Desktop Manager Service does not work. Start using Services Manager this service as shown below:

  1. download System Utilities software.
  2. click on the Service Manager tab.
  3. Select the desktop Service Manager service.
  4. click on the Start button.

  Disable the boot file entry

  In case your antivirus program deleted a virus infected, but have not deleted the corresponding Startup registry keys, this error can occur. To resolve this issue, disable this entry.

  1. click on start.
  2. type MsConfig and press ENTER.
  3 click the Startup tab and uncheck the entry with the file.
  4. click on apply. Ok.

  Run some commands

  Execution of orders supplied with the command prompt can fix DWM. EXE error. Follow these steps:

  1. click on start.
  2. type command prompt in the search box.
  3. press ENTER.
  4. Enter the following commands:
  CD %windir%\system32
  WScript slmgr.vbs - rearm
  5 restart the computer after the end.

  Scan the system for Corruption files

  DWM. EXE error may occur when the DWM. EXE system files is damaged. Replace this file with the original version can fix the error.

  1. Insert the Microsoft Windows installation disc.
  2. click on start | Run.
  3. type SFC/scannow, and then press ENTER.
  4. follow the directions in the wizard.

  Restore the system to a previous state

  By using the system restore, restore all changes made to your system to a previous state. Here are the steps to fix the DWM. EXE Error:

  1. click on start.
  2 type system restore in the search box.
  3. press ENTER.
  4. follow the instructions of the wizard your own.

• HP ENVY x 360-m6-w103dx: AccelerometerSt.exe crash at startup

  Bought this new laptop for Windows 10 a week ago. Windows did a few updates a few days previously, and now whenever I boot, I get an error message saying that the application failed to start properly. (0xc000007b)

  After finding others on this issue, I learned that it's the HP 3D DriveGuard program.  I completely uninstalled, rebooted, reinstalled sp71708.exe as recommended HERE.  Who has not solved the problem and the error message is displayed every time that the laptop starts.

  

  Hello:

  You have an unknown device in Device Manager with a hardware ID of 6007 ACPI?

  If this isn't the case, then has the problem itself and the 3D driveguard system works.

  If you do not see an unknown device with a hardware ID of ACPI 6007, this means that the 3D driveguard device does not, because the driver is not installed.

  Disadvantage of this... If accidentally fall or knock your laptop, the hard drive heads will not be parked by the accelerometer, and most likely the hard drive can be destroyed and must be replaced.

  IMO, if you drop your laptop computer, 3D driveguard probably won't help anyway, unless you dropped less than 2 feet from the ground.  That would be environ.75 of a meter on the metric system.

• Adobe Photoshop CC 2015 crashes at startup (Photoshop.exe)

  After update today with CC 2015, I get the above message whenever I try to launch Photoshop.  I tried a number of suggestions, but nothing seems to work.  I also called support and they told me they would call me back within 30 minutes.  That's more than an hour there.  I just tried to call back, and no one answered.  The website says they are open until 19: 00 PST, which is still an hour away.  Support sorry and an unresolved issue.  It seems that Adobe is looking for ways to make their customers to leave.

  Anyway, does anyone have a solution to this problem of Photoshop?

  HI Sophie1alex,

  We have a documented article for "Photoshop crashing at startup.  Thank you all for your contributions and suggestions.

  https://helpx.Adobe.com/Photoshop/KB/Photoshop-crash-with-faulty-module-Photoshop-exe.html

  Kind regards

  Gerard

• Firefox not working in Win7 now it crashes at startup even after a clean install. is there a problem with Symantec?

  Firefox worked on my Windows 7 desktop. One day he gave me a report of crash at startup, I went through the troubleshooting procedures suggested. I tried restarting, upgrade, uninstalled and reinstalled, uninstalled and cleaned the files and the registry and deleted the files module then resettled but nothing works. It keeps giving a crash report on startup. I remember that my Symantec software gave a message that FireFox has been stopped due to an attack on my system. Ever since then, it won't work and I can't seem to cross the screen to crash at startup of FireFox.

  Thank you for the report crash IDs. If you open the error reports and click on the 'Modules' tab, you will see that the first on the list in each case is "FLVSrvLib.dll". This module installs with various programs of Applian Technologies including Freecorder and Replay Media Catcher.

  This crash is closely related to have BOTH software Applian software of security AND Norton. As no doubt you don't want spend away from Norton, you can remove or disable the Applian software as follows:

  (1) uninstall and restart

  If you have either of these programs and it is not essential, try to uninstall it then restart Windows to ensure that none of its components are running.

  Firefox will start normally after that?

  (2) avoid auto-start

  If you do not uninstall the program, a few others said using the msconfig program to stop execution at startup FlvSrvc.exe circumvented the problem.

  See: http://windows.microsoft.com/en-us/windows/using-system-configuration

  You may still need to restart to unload the software of your current Windows session.

  Success?

• 7.2 Skype crashes at startup

  I know this topic has already been here. And believe me, I've tried with serveal things and none of them worked. I don't really know what else I can try to do.

  The story is, that Skype has worked very well for me (next to rare accidents, nothing to worry about). then all of a sudden that it crashed, every time I picked up a call (or called someone). The writing was no problem and since it's essential I usw Skype for, I had no real problem with that. But after a while, I wanted that it works correctly. So I tried uninstalling and reinstalling my Skype and since then it crashes at startup. I use the normal SkypeSetup.exe I downloaded from the main site. I also tried older versions, nothing works. I tried to delete the settings in Skype and to my surprise, Skype starts after that. Unfortunately, it crashes as soon as I connect.

  Please help me, I really have no idea what could be wrong with my PC (or Skype).

  Skype-Version: 7.2

  OS: Windows 7 Home Premium

  additional notes:

  I read that IE needs to work, and that's fine.

  I also ran the dxdiag program and attach the file to this message.

  DxDiag crashed into Direct3D:

  DxDiag previously : Crashed to Direct3D (step 3). Re-run DxDiag with the command line parameter 'dontskip' or choose not to ignore the gathering information when prompted may result in DxDiag obtaining this information

  Skype does not work with default Direct3D.

  Try reinstalling the NVIDIA graphics drivers:

  http://www.GeForce.com/drivers/results/81879

• Windows cannot find C:\Docume~1\owner\Locals~1\Temp\dwm.exe

  I get the following error at startup: Windows cannot find C:\Docume~1\owner\Locals~1\Temp\dwm.exe

  Once I click ok, I get the same error message, but it says it could not load or run it from the registry.

  In addition, I can not get on the internet on my PC. I can access the internet fine on my laptop through y network.

  I read how to solve the error message, but I can't get on the internet to access programs. Suggestions? I'm so frustrated!

  Thanks in advance!  :)

  Steve Winograd's right - no executables are normally launched from the Temp folder where you specify unless the malware put them there.

  Your system is currently or has been infected and perhaps your detection/removal software clean the folder Temp of the suspicious content but this process does not always boot entry that points to the location/suspicious file, so that each reboot (or login), he wants to run it.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.

  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows cannot find C:\DOCUME~1\Owner\LOCALS~1\Temp\dwm.exe not __could not load or run C:\DOCUME~1\Owner\LOCALS~1\Temp\dwm.exe specified in the registry___

  Windows XP SP3

  Lift both of these errors at startup. Click on through one, then a second will appear. Click per second startup continues to load windows and the system is functional.  I did some research, seems quite common to have dwm.exe questions, so not sure how I should be. I guess that this is caused by some sort of worm/virus/trojan. Ran anti-virus scan: Panda antivirus pro 2010 found 3 infections but problem still not solved. Next step?

  No simple AV tool and not every doesn't know everything you need to use more than one scanning program in your arsenal of AV.

  In the perfect world, do some exectutables launch of the Documents and Settings folder.

  It seems that despite your Panda AV, your system is always somehow afflicted.

  Sometimes even the 'best' AV tools are unable to clean up the mess of certain conditions or they can't tell if what they discover is a true infection or something you did on purpose so they will leave him alone, and then do you a little housekeeping cleaning by hand.

  Autoruns is the right idea, but first make sure you have something missed Panda, then use Autoruns if you still have the problem.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

  Autoruns will help you clean up the leftovers, but you have to be as sure as possible that there is no infection rest first.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.

  If you are comfortable editing the registry you can find and remove the reference directly from there or remove

  using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.

  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.

  Here is a link to a popular registry backup tool:

  http://www.SnapFiles.com/get/ERUNT.html

  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.

  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.

  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.

  Scroll through the list and look for a boot entry associated files in the error message.

  If you can't find on the connection tab, look in any tab.

  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.

  Restart your computer and solve the outstanding issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• C:\DOCUME~1\Owner\LOCALS~1\Temp\dwm.exe

  I get the above message block when I start my computer. I run Ad-Aware, Malware bytes and StopZilla with no luck. He won't let me connect to the internet. Any ideas on what I can do? My wife needs this computer for school work and I need mine to be deployed. Thank you in advance.

  Hello

  Normally indicates that you have or have had a virus. Usually programs do not run in the temp folder.

  You can try an online virus scanner to check the virus first. For example:

  ESET: http://www.eset.com/online-scanner

  TrendMicro: http://housecall.trendmicro.com/

  Once you are sure that you do not have a virus, you can download and run "Autoruns" from Sysinternals http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Download the program, unzip it and run it. After accepting the EULA, it will take time to discover all of your startup items. Go to the bottom of the list and uncheck the item "setings\temp\dwm.exe c:\documents and Settings owner". Autoruns to shut down and restart the PC to see if the error is still in place.

  You can find information on using Autoruns to the same address as above.

  You will need to let us know if this sorts your internet problem.

• Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

  original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

  Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

  Never use Registry Repair programs.

  They can cause more harm than good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Win 7 x 64 Explorer.exe crash on ntdll.dll

  All - here's what's happening... Every morning that I have to restart my laptop because explorer.exe crashes, the laptop screen becomes partially black and makes it unusable. Relieves temporarily restart them the problem until the next day. Here is the info of Appcrash.

  Version = 1
  EventType = APPCRASH
  EventTime = 130613872684994098
  ReportType = 2
  Consent = 1
  UploadTime = 130613872688164279
  ReportIdentifier = 48c3f23a-7493-11e4-a8fb-74e54321084a
  IntegratorReportIdentifier = 48c3f239-7493-11e4-a8fb-74e54321084a
  Response.BucketId = 134239895
  Response.BucketTable = 4
  Response.Type = 4
  SIG [0]. Name = name of the Application
  SIG [0]. Value = Explorer.exe
  GIS [1]. Name = Version of the Application
  GIS [1]. Value = 6.1.7601.17567
  GIS [2]. Name = timestamp of the Application
  GIS [2]. Value = 4d672ee4
  GIS [3]. Name = name of the Module fault
  GIS [3]. Value = ntdll.dll
  GIS [4]. Name = Fault Module Version
  GIS [4]. Value = 6.1.7601.18247
  GIS [5]. Name = Fault Module Timestamp
  GIS [5]. Value = 521eaf24
  GIS [6]. Name = Exception Code
  GIS [6]. Value = c000041d
  GIS [7]. Name = offset of the Exception
  GIS [7]. Value = 000000000004e4e4
  DynamicSig [1]. Name = OS Version
  DynamicSig [1]. Value=6.1.7601.2.1.0.256.4
  DynamicSig [2]. Name = locale ID
  DynamicSig [2]. Value = 1033
  DynamicSig [22]. Name = additional Information 1
  DynamicSig [22]. Value = fa41
  DynamicSig [23]. Name = additional Information 2
  DynamicSig [23]. Value = fa41cd2feced06e3463e16a4b7f9339c
  DynamicSig [24]. Name = additional Information 3
  DynamicSig [24]. Value = 7fd2
  DynamicSig [25]. Name = additional Information 4
  DynamicSig [25]. Value = 7fd20199592f7a580c1651f5f34e3098
  UI[2]=C:\Windows\Explorer.exe
  UI [3] = Windows Explorer has stopped working
  UI [4] = Windows can search for a solution to the problem online and try to restart the program.
  UI [5] = check online for a solution, and then restart the program
  UI [6] = check online for a solution later and close the program
  UI [7] = close the program
  LoadedModule[0]=C:\Windows\Explorer.EXE
  LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
  LoadedModule[2]=C:\Windows\system32\kernel32.dll
  LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
  LoadedModule[4]=C:\Windows\system32\ADVAPI32.dll
  LoadedModule[5]=C:\Windows\system32\msvcrt.dll
  LoadedModule[6]=C:\Windows\SYSTEM32\sechost.dll
  LoadedModule[7]=C:\Windows\system32\RPCRT4.dll
  LoadedModule[8]=C:\Windows\system32\GDI32.dll
  LoadedModule[9]=C:\Windows\system32\USER32.dll
  LoadedModule[10]=C:\Windows\system32\LPK.dll
  LoadedModule[11]=C:\Windows\system32\USP10.dll
  LoadedModule[12]=C:\Windows\system32\SHLWAPI.dll
  LoadedModule[13]=C:\Windows\system32\SHELL32.dll
  LoadedModule[14]=C:\Windows\system32\ole32.dll
  LoadedModule[15]=C:\Windows\system32\OLEAUT32.dll
  LoadedModule[16]=C:\Windows\system32\EXPLORERFRAME.dll
  LoadedModule[17]=C:\Windows\system32\DUser.dll
  LoadedModule[18]=C:\Windows\system32\DUI70.dll
  LoadedModule[19]=C:\Windows\system32\IMM32.dll
  LoadedModule[20]=C:\Windows\system32\MSCTF.dll
  LoadedModule[21]=C:\Windows\system32\UxTheme.dll
  LoadedModule[22]=C:\Windows\system32\POWRPROF.dll
  LoadedModule[23]=C:\Windows\system32\SETUPAPI.dll
  LoadedModule[24]=C:\Windows\system32\CFGMGR32.dll
  LoadedModule[25]=C:\Windows\system32\DEVOBJ.dll
  LoadedModule[26]=C:\Windows\system32\dwmapi.dll
  LoadedModule[27]=C:\Windows\system32\slc.dll
  LoadedModule[28]=C:\Windows\WinSxS\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.18455_none_2b283fd671e9bf4d\gdiplus.dll
  LoadedModule[29]=C:\Windows\system32\Secur32.dll
  LoadedModule [30] = C:\Windows\system32\SSPICLI. DLL
  LoadedModule[31]=C:\Windows\system32\PROPSYS.dll
  LoadedModule [32] = C:\Windows\system32\QIPCAP64. DLL
  LoadedModule[33]=C:\Windows\system32\WINSTA.dll
  LoadedModule[34]=C:\Windows\system32\CRYPTBASE.dll
  LoadedModule[35]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac\comctl32.dll
  LoadedModule[36]=C:\Windows\system32\WindowsCodecs.dll
  LoadedModule[37]=C:\Windows\system32\profapi.dll
  LoadedModule[38]=C:\Windows\system32\apphelp.dll
  LoadedModule[39]=C:\Windows\system32\CLBCatQ.DLL
  LoadedModule[40]=C:\Windows\system32\EhStorShell.dll
  LoadedModule [41] = C:\PROGRA~1\MICROS~1\Office14\GROOVEEX. DLL
  LoadedModule[42]=C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCR90.dll
  LoadedModule[43]=C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCP90.dll
  LoadedModule[44]=C:\Windows\WinSxS\amd64_microsoft.vc90.atl_1fc8b3b9a1e18e3b_9.0.30729.6161_none_0a1fd3a3a768b895\ATL90. DLL
  LoadedModule[45]=C:\PROGRA~1\COMMON~1\MICROS~1\OFFICE14\Cultures\office.odf
  LoadedModule[46]=C:\PROGRA~1\MICROS~1\Office14\1033\GrooveIntlResource.dll
  LoadedModule[47]=C:\Windows\System32\cscui.dll
  LoadedModule[48]=C:\Windows\System32\CSCDLL.dll
  LoadedModule[49]=C:\Windows\system32\CSCAPI.dll
  LoadedModule[50]=C:\Windows\system32\QIPOverlay.dll
  LoadedModule[51]=C:\Windows\system32\ntshrui.dll
  LoadedModule[52]=C:\Windows\system32\srvcli.dll
  LoadedModule[53]=C:\Windows\system32\IconCodecService.dll
  LoadedModule[54]=C:\Windows\system32\CRYPTSP.dll
  LoadedModule[55]=C:\Windows\system32\rsaenh.dll
  LoadedModule[56]=C:\Windows\system32\RpcRtRemote.dll
  LoadedModule[57]=C:\Windows\system32\SndVolSSO.DLL
  LoadedModule [58] = C:\Windows\system32\HID. DLL
  LoadedModule[59]=C:\Windows\System32\MMDevApi.dll
  LoadedModule[60]=C:\Windows\system32\timedate.cpl
  LoadedModule [61] = to C:\Windows\system32\ATL. DLL
  LoadedModule[62]=C:\Windows\system32\actxprxy.dll
  LoadedModule[63]=C:\Windows\system32\ntmarta.dll
  LoadedModule[64]=C:\Windows\system32\WLDAP32.dll
  LoadedModule[65]=C:\Windows\System32\shdocvw.dll
  LoadedModule[66]=C:\Windows\system32\LINKINFO.dll
  LoadedModule [67] = c: \ Program Files (x 86) \ThinkPad\Utilities\PWMTR64V. DLL
  LoadedModule[68]=C:\Windows\system32\MSIMG32.dll
  LoadedModule[69]=C:\Windows\system32\COMDLG32.dll
  LoadedModule [70] = C:\Windows\system32\WINSPOOL. DRV
  LoadedModule[71]=C:\Windows\system32\oledlg.dll
  LoadedModule[72]=C:\Windows\system32\XmlLite.dll
  LoadedModule[73]=C:\Windows\system32\WTSAPI32.dll
  LoadedModule[74]=C:\Windows\system32\WINMM.dll
  LoadedModule [75] = C:\Windows\system32\PSAPI. DLL
  LoadedModule[76]=C:\Windows\system32\OLEACC.dll
  LoadedModule [77] = C:\PROGRA~2\ThinkPad\UTILIT~1\US\PWMRT64V. DLL
  LoadedModule [78] = C:\PROGRA~2\ThinkPad\UTILIT~1\PWMIF64V. DLL
  LoadedModule[79]=C:\Windows\system32\WINTRUST.dll
  LoadedModule[80]=C:\Windows\system32\CRYPT32.dll
  LoadedModule[81]=C:\Windows\system32\MSASN1.dll
  LoadedModule[82]=C:\Windows\system32\wbemcomn.dll
  LoadedModule[83]=C:\Windows\system32\WS2_32.dll
  LoadedModule[84]=C:\Windows\system32\NSI.dll
  LoadedModule[85]=C:\Windows\system32\wbem\wbemsvc.dll
  LoadedModule[86]=C:\Windows\system32\wbem\fastprox.dll
  LoadedModule[87]=C:\Windows\system32\NTDSAPI.dll
  LoadedModule [88] = C:\Windows\system32\IGFXEXPS. DLL
  LoadedModule[89]=C:\Windows\system32\Sensor64.dll
  LoadedModule[90]=C:\Windows\system32\USERENV.dll
  LoadedModule[91]=C:\Windows\system32\msls31.dll
  LoadedModule [92] = c: Files\microsoft shared\ink\tiptsf.dll
  LoadedModule[93]=C:\Windows\System32\ieframe.dll
  LoadedModule[94]=C:\Windows\system32\iertutil.dll
  LoadedModule[95]=C:\Windows\system32\authui.dll
  LoadedModule[96]=C:\Windows\system32\CRYPTUI.dll
  LoadedModule[97]=C:\Windows\system32\NetworkExplorer.dll
  LoadedModule[98]=C:\Windows\system32\MPR.dll
  LoadedModule[99]=C:\Windows\System32\gameux.dll
  LoadedModule[100]=C:\Windows\System32\wer.dll
  LoadedModule[101]=C:\Windows\system32\msiltcfg.dll
  LoadedModule[102]=C:\Windows\system32\VERSION.dll
  LoadedModule[103]=C:\Windows\system32\msi.dll
  LoadedModule[104]=C:\Windows\system32\urlmon.dll
  LoadedModule[105]=C:\Windows\system32\WININET.dll
  LoadedModule[106]=C:\Windows\system32\Normaliz.dll
  LoadedModule [107] = C:\Windows\system32\SFC. DLL
  LoadedModule [108] = C:\Windows\system32\sfc_os. DLL
  LoadedModule[109]=C:\Windows\System32\SyncCenter.dll
  LoadedModule[110]=C:\Windows\system32\wdmaud.drv
  LoadedModule[111]=C:\Windows\system32\ksuser.dll
  LoadedModule[112]=C:\Windows\system32\AVRT.dll
  LoadedModule [113] = C:\Windows\system32\AUDIOSES. DLL
  LoadedModule[114]=C:\Windows\system32\msacm32.drv
  LoadedModule[115]=C:\Windows\system32\MSACM32.dll
  LoadedModule[116]=C:\Windows\system32\midimap.dll
  LoadedModule[117]=C:\Windows\system32\netutils.dll
  LoadedModule[118]=C:\Windows\system32\MLANG.dll
  LoadedModule[119]=C:\Windows\system32\stobject.dll
  LoadedModule[120]=C:\Windows\system32\BatMeter.dll
  LoadedModule[121]=C:\Windows\system32\es.dll
  LoadedModule[122]=C:\Windows\system32\prnfldr.dll
  LoadedModule[123]=C:\Windows\system32\dxp.dll
  LoadedModule[124]=C:\Windows\system32\Syncreg.dll
  LoadedModule[125]=C:\Windows\ehome\ehSSO.dll
  LoadedModule[126]=C:\Windows\System32\netshell.dll
  LoadedModule [127] = C:\Windows\System32\IPHLPAPI. DLL
  LoadedModule [128] = C:\Windows\System32\WINNSI. DLL
  LoadedModule[129]=C:\Windows\System32\nlaapi.dll
  LoadedModule[130]=C:\Windows\System32\AltTab.dll
  LoadedModule[131]=C:\Windows\System32\pnidui.dll
  LoadedModule[132]=C:\Windows\System32\QUtil.dll
  LoadedModule[133]=C:\Windows\System32\wevtapi.dll
  LoadedModule[134]=C:\Windows\system32\wpdshserviceobj.dll
  LoadedModule[135]=C:\Windows\system32\PortableDeviceTypes.dll
  LoadedModule[136]=C:\Windows\System32\Actioncenter.dll
  LoadedModule[137]=C:\Windows\system32\PortableDeviceApi.dll
  LoadedModule[138]=C:\Windows\System32\cscobj.dll
  LoadedModule[139]=C:\Windows\System32\srchadmin.dll
  LoadedModule [140] = C:\Program Files\ThinkPad\Bluetooth Software\btncopy.dll
  LoadedModule[141]=C:\Windows\system32\mssprxy.dll
  LoadedModule[142]=C:\Windows\System32\msxml6.dll
  LoadedModule[143]=C:\Windows\system32\imapi2.dll
  LoadedModule[144]=C:\Windows\System32\bthprops.cpl
  LoadedModule [145] = C:\Windows\system32\dhcpcsvc6. DLL
  LoadedModule [146] = C:\Windows\system32\dhcpcsvc. DLL
  LoadedModule[147]=C:\Windows\system32\credssp.dll
  LoadedModule[148]=C:\Windows\System32\npmproxy.dll
  LoadedModule[149]=C:\Windows\System32\hgcpl.dll
  LoadedModule[150]=C:\Windows\System32\provsvc.dll
  LoadedModule[151]=C:\Windows\system32\SAMLIB.dll
  LoadedModule[152]=C:\Windows\system32\wkscli.dll
  LoadedModule [153] = C:\Windows\system32\SXS. DLL
  LoadedModule[154]=C:\Windows\system32\fxsst.dll
  LoadedModule[155]=C:\Windows\system32\FXSAPI.dll
  LoadedModule [156] = C:\Windows\system32\FXSRESM. DLL
  LoadedModule[157]=C:\Windows\system32\Wlanapi.dll
  LoadedModule[158]=C:\Windows\system32\wlanutil.dll
  LoadedModule[159]=C:\Windows\system32\wwanapi.dll
  LoadedModule[160]=C:\Windows\system32\wwapi.dll
  LoadedModule[161]=C:\Windows\System32\QAgent.dll
  LoadedModule[162]=C:\Windows\System32\UIAnimation.dll
  LoadedModule[163]=C:\Windows\system32\DEVRTL.dll
  LoadedModule[164]=C:\Windows\System32\wscinterop.dll
  LoadedModule[165]=C:\Windows\System32\WSCAPI.dll
  LoadedModule[166]=C:\Windows\System32\wscui.cpl
  LoadedModule[167]=C:\Windows\System32\werconcpl.dll
  LoadedModule[168]=C:\Windows\System32\framedynos.dll
  LoadedModule[169]=C:\Windows\System32\wercplsupport.dll
  LoadedModule[170]=C:\Windows\System32\hcproviders.dll
  LoadedModule [171] = C:\Program may Explorer\ieproxy.dll
  LoadedModule[172]=C:\Windows\system32\MsftEdit.dll
  LoadedModule[173]=C:\Windows\system32\cabview.dll
  LoadedModule [174] = C:\Program Files\ThinkPad\Bluetooth Software\btmmhook.dll
  LoadedModule[175]=C:\Windows\system32\thumbcache.dll
  LoadedModule[176]=C:\Windows\System32\StructuredQuery.dll
  LoadedModule[177]=C:\Windows\system32\zipfldr.dll
  LoadedModule[178]=C:\Windows\System32\drprov.dll
  LoadedModule[179]=C:\Windows\System32\ntlanman.dll
  LoadedModule[180]=C:\Windows\System32\davclnt.dll
  LoadedModule[181]=C:\Windows\System32\DAVHLPR.dll
  LoadedModule[182]=C:\Windows\system32\prnntfy.dll
  LoadedModule[183]=C:\Windows\system32\puiapi.dll
  LoadedModule[184]=C:\Windows\system32\printui.dll
  LoadedModule[185]=C:\Windows\system32\puiobj.dll
  LoadedModule[186]=C:\Windows\system32\mswsock.dll
  LoadedModule[187]=C:\Windows\System32\wshtcpip.dll
  LoadedModule[188]=C:\Windows\System32\wship6.dll
  LoadedModule[189]=C:\Windows\system32\DNSAPI.dll
  LoadedModule[190]=C:\Windows\system32\rasadhlp.dll
  LoadedModule[191]=C:\Windows\System32\fwpuclnt.dll
  LoadedModule [192] = C:\Windows\system32\kerberos. DLL
  LoadedModule[193]=C:\Windows\system32\cryptdll.dll
  LoadedModule[194]=C:\Windows\system32\bcrypt.dll
  LoadedModule[195]=C:\Windows\system32\bcryptprimitives.dll
  LoadedModule[196]=C:\Windows\system32\van.dll
  LoadedModule[197]=C:\Windows\system32\RasMM.dll
  LoadedModule[198]=C:\Windows\system32\RASAPI32.dll
  LoadedModule[199]=C:\Windows\system32\rasman.dll
  LoadedModule[200]=C:\Windows\system32\WWanMM.dll
  LoadedModule[201]=C:\Windows\system32\WlanMM.dll
  LoadedModule[202]=C:\Windows\system32\wlanhlp.dll
  LoadedModule[203]=C:\Windows\system32\OneX.DLL
  LoadedModule[204]=C:\Windows\system32\eappprxy.dll
  LoadedModule[205]=C:\Windows\system32\eappcfg.dll
  LoadedModule [206] = c: Files\Lenovo\lpu\lpu_lib.dll
  LoadedModule[207]=C:\Windows\system32\NETAPI32.dll
  LoadedModule [208] = C:\Windows\system32\SAMCLI. DLL
  LoadedModule[209]=C:\Windows\system32\wpdshext.dll
  LoadedModule[210]=C:\Windows\system32\ndfapi.dll
  LoadedModule[211]=C:\Windows\system32\wdi.dll
  LoadedModule[212]=C:\Windows\system32\EhStorAPI.dll
  LoadedModule[213]=C:\Windows\system32\imaadp32.acm
  LoadedModule[214]=C:\Windows\system32\msg711.acm
  LoadedModule[215]=C:\Windows\system32\msgsm32.acm
  LoadedModule[216]=C:\Windows\system32\msadp32.acm
  LoadedModule[217]=C:\Windows\System32\l3codeca.acm
  State [0]. Key = transport. DoneStage1
  State [0]. Value = 1
  State [1]. Key = DataRequest
  State [1]. Value = bucket = 134239895/nBucketTable = 4/nResponse = 1/n
  FriendlyEventName = Stopped Working
  ConsentKey = APPCRASH
  AppName = Windows Explorer
  AppPath=C:\Windows\Explorer.EXE

  Hi Jesse,.

  Thank you for your response. I can understand the disadvantages you've met on this issue. I'll be happy to help you with this problem.

  I appreciate your efforts for the difficult steps of troubleshooting and providing additional troubleshooting necessary details.

  This problem can be caused by infected files, drivers or conflicts with other programs, software malicious, and memory can cause starting problems.

  I suggest you read the article my computer hangs or freezes on Windows startup screen of link below to resolve this issue.

  https://support.Microsoft.com/kb/2681286?WA=wsignin1.0

  Article a steps to start troubleshooting repair, Startup Repair can detect and solve the problems that prevent the startup of your PC.

  Keep us informed of the results. Don't answer if you need assistance, we will be happy to help you.

• Windows 7 Fallout 3 crash on startup, I tried patch, fix xlive.dll, ffdshow does nothing

  My laptop should be a system good enough to run Fallout 3.
  Windows 7
  Core i3
  4 x 32/64 GB ram
  smartaudio cocoa 2
  Intel hd graphics card

  I downloaded the patch on the site of Fallout, then got error xlive.dll, downloaded the patch to correct that, following the crash at startup, sought ffdshow could not find, when I found it in the registry allowing or disable it has nothing to do with the port of gameplay or fallout, read also this is another solution that does not work - particularly for windows users 7.  Tried running Vista and XP, I'm set to run everything as admin, none of this works _.  I bought this game in detail, since when a game doesn't?  AND when I paid full price for it?  It's stupid _.  Is it the graphics card - I do not think?  Please help, I don't play much games, was really looking forward to try this one.  But I guess that things are not only made the way they used to... to work.

  Hi litleredpoetess

  I suggest you to check with the manufacturer about compatibility with Windows 7.

  You can even check the compatibility of the link below: Windows Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

  Try to install the configuration file in Windows Vista or in XP compatibility mode. Steps to follow:

  i. right click on the game (on the .exe file)

  II. click on properties

  III. click on the Compatibility tab

  IV. Select run this program in compatibility mode and select windows vista

  Link for reference below: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  If the program or the software is not compatible with windows 7 and if you are not able to run the software in compatibility mode then you should contact the manufacturer of the software or program, as there is no upgrade or patch for Windows 7.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why do I get error of dwm.exe?

  Original title: dwm.exe error

  I get an error dmw.exe does not. I went to msconfig and services have stopped and I can't start them. I've also done SFC/scannow, and he did not finish from 16 percent. I also made selective startup and it does not fix it. Now, I'm stuck with the computer not responding not to chkdsk/r, it is stuck on 4 of the 5 and the computer won't past and restart it back to the same screen for chkdsk.

  Hello

  I need some clarification on the question to solve it.

  1. When did you get this error?

  2. did you of recent changes on the computer?

  The dvm.exe file is the Microsoft Windows Desktop Windows Manager and is a valid Windows file that must be running on your computer. He is responsible for the graphic effects such as transparency or the glass eye, the alt tab windows switcher Flip3D and manages the rendering of each window to display on your computer.

  I suggest to install all Windows updates and then check the issue. Check out the following link to find out how to install Windows updates.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also run a virus scan and check. See the link to do so.

  How to remove computer virus

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Feel free to get back to us, in case if you have one more question. We would be happy to help you.

• Windows 7 Explorer.exe Crash

  Hello

  I have a computer Windows 7 x 32 and my Windows Explorer.exe crashes.
  Explorer hangs even when I have a window unique explore open.
  I managed to get a .dmp file and it said:
  This dump file is an exception of interest stored in it.

  The stored exception information are accessible via .ecxr.

  (ac0.14b4): access violation - code c0000005 (first/second chance not available)

  EAX = 00000000 ebx = 0372f040 ecx = 00000400 edx = 00000000 esi = edi = 00000002 00000000

  EIP = 777f7094 esp = 0372eff0 ebp = 0372f08c iopl = 0 nv up ei pl zr pe nc

  CS = 001 b ss = 0023 ds = 0023're = 0023 fs = 003 b gs = 0000 efl = 00000246
  Here is the link of the dump file of the: https://www.dropbox.com/s/jbjsviagi1jfbxi/explorer.exe.2752.dmp
  Sounds like a memory problem.
  Can someone help me to look into this?
  Thank you
  Daniel

  Hi Daniel,.

  Remember to make changes to the computer before this problem?

  Possible cause would be due to out-of-date video drivers, corrupted system files, viruses or malware, faulty RAM, infection etc..

  I suggest you follow these methods and check:

  Method 1: Run the hotfix:
  Windows Explorer crashes randomly in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/2638018/en-us

  Method 2: Follow the suggestions in this article:
  Explorer Windows stopped working

  http://support.Microsoft.com/kb/2694911/en-us

  Virus scan: while the Virus scan, data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Clean boot: after a repair, be sure to put the computer to a normal startup mode.

  Update on site: note this upgrade on the spot takes the same amount of time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  Follow the steps and let us know if this helps.  If the problem persists, please answer and we will be happy to help you.

• 6.7 Lightroom crashes at startup (code 40000015)

  Hello!

  As the title suggests, LR crashes at startup. A week earlier, when the last startup, it has worked well.

  Here are the accident report:

  Problemsignatur:

  Problemereignisname: APPCRASH

  Anwendungsname: lightroom.exe

  Anwendungsversion: 6.7.0.10

  Anwendungszeitstempel: 57dd74b0

  Fehlermodulname: MSVCR120.dll

  Fehlermodulversion: 12.0.21005.1

  Fehlermodulzeitstempel: 524f83ff

  Ausnahmecode: 40000015

  Ausnahmeoffset: a 0000000000074, 46

  Betriebsystemversion: 6.1.7601.2.1.0.256.1

  Gebietsschema-ID: 3079

  Zusatzinformation 1:0133

  Zusatzinformation 2: 0133ab70a08f7ec2da18403ad9fb0964

  Zusatzinformation 3: de4d

  Zusatzinformation 4: de4d88d638817414a7f8dec068c67b31

  Photoshop works very well.

  My specs:

  Windows 7 64 bit (almost new facility)

  GeForce GTX 960

  (everything is up-to-date)

  What I tried:

  -) Disable all listed in mscofnig under system startup - restart

  Restart -) install the latest Visual C++ Redistributable package-

  -) Uninstall LR, Photoshop and Creative Cloud - restart - running the cleanup tool Adobe CC and did a new install - reboot

  The cleaning tool Adobe CC didn't throw any errors, but a caveat:

  [Mon Oct 10 08:00:42 2016] Action: Delete the folder C:\Program Files (x 86) \Common Files\Adobe\backup20161010T000830 because there are no deleted product.

  [Mon Oct 10 08:00:42 2016] SAVED LOG FILE: C:\Users\HI\AppData\Local\Temp\Adobe Creative cloud cleanser Tool.log

  [Mon Oct 10 08:00:42 2016] Adobe Creative Cloud tool in cleaning completed successfully

  [Mon Oct 10 08:00:42 2016]

  [Mon Oct 10 08:00:42 2016] *-*-*-*-*-*-: START:-SUMMARY OF THE avertissements-*-*-*-*-*-*

  [Mon Oct 10 08:00:30 2016] DB does not exist in: C:\Program Files (x 86) \Common Files\Adobe\caps\Media_db.db

  [Mon Oct 10 08:00:42 2016] *-*-*-*-*-*-: END:-SUMMARY OF THE avertissements-*-*-*-*-*-*

  [Mon Oct 10 08:00:42 2016] -.

  [Mon Oct 10 08:00:42 2016] * = * = * = * = * = * = * = * = *: end of Session: * = * = * = * = * = * = * = * = * = * = *.

  [Mon Oct 10 08:00:42 2016] -.

  Unfortunately, none of these things worked, still get the same error.

  Interesting detail: the error message twice.

  Can someone help me please?

  After hours, I finally found a solution:

  Repair the existing installation of "Visual C++ Redistributable for Visual Studio 2012 updated 4"

  See post:

  Re: Do not start lightroom 6.2.1.1 after update. Error in module MSVCR120.dll

  Many thanks to CHeil and Slava Rossov!