C:\DOCUME~1\Owner\LOCALS~1\Temp\dwm.exe

Similar Questions

• Windows cannot find C:\Docume~1\owner\Locals~1\Temp\dwm.exe

  I get the following error at startup: Windows cannot find C:\Docume~1\owner\Locals~1\Temp\dwm.exe

  Once I click ok, I get the same error message, but it says it could not load or run it from the registry.

  In addition, I can not get on the internet on my PC. I can access the internet fine on my laptop through y network.

  I read how to solve the error message, but I can't get on the internet to access programs. Suggestions? I'm so frustrated!

  Thanks in advance!  :)

  Steve Winograd's right - no executables are normally launched from the Temp folder where you specify unless the malware put them there.

  Your system is currently or has been infected and perhaps your detection/removal software clean the folder Temp of the suspicious content but this process does not always boot entry that points to the location/suspicious file, so that each reboot (or login), he wants to run it.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.

  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows cannot find C:\DOCUME~1\Owner\LOCALS~1\Temp\dwm.exe not __could not load or run C:\DOCUME~1\Owner\LOCALS~1\Temp\dwm.exe specified in the registry___

  Windows XP SP3

  Lift both of these errors at startup. Click on through one, then a second will appear. Click per second startup continues to load windows and the system is functional.  I did some research, seems quite common to have dwm.exe questions, so not sure how I should be. I guess that this is caused by some sort of worm/virus/trojan. Ran anti-virus scan: Panda antivirus pro 2010 found 3 infections but problem still not solved. Next step?

  No simple AV tool and not every doesn't know everything you need to use more than one scanning program in your arsenal of AV.

  In the perfect world, do some exectutables launch of the Documents and Settings folder.

  It seems that despite your Panda AV, your system is always somehow afflicted.

  Sometimes even the 'best' AV tools are unable to clean up the mess of certain conditions or they can't tell if what they discover is a true infection or something you did on purpose so they will leave him alone, and then do you a little housekeeping cleaning by hand.

  Autoruns is the right idea, but first make sure you have something missed Panda, then use Autoruns if you still have the problem.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

  Autoruns will help you clean up the leftovers, but you have to be as sure as possible that there is no infection rest first.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.

  If you are comfortable editing the registry you can find and remove the reference directly from there or remove

  using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.

  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.

  Here is a link to a popular registry backup tool:

  http://www.SnapFiles.com/get/ERUNT.html

  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.

  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.

  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.

  Scroll through the list and look for a boot entry associated files in the error message.

  If you can't find on the connection tab, look in any tab.

  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.

  Restart your computer and solve the outstanding issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• After the startup error message: C:Docume~1\owner\Locals~1\Temp\dwm.exe__how I can fix it.

  I ran Malwarebytes Anti-Malware and the following came and I deleted everything that came.  Then, I get the error that I mentioned:

  Malwarebytes' Anti-Malware 1.46
  www.Malwarebytes.org

  Database version: 4725

  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  30/09/2010 21:36:15
  MBAM-log-2010-09-30 (36-21-15) .txt

  Scan type: quick scan
  Objects scanned: 170298
  Time elapsed: 1 hour (s), 32 minute (s), 59 second (s)

  Memory processes infected: 3
  Memory Modules infected: 0
  Registry keys infected: 0
  Registry values infected: 1
  The infected registry data: 1
  Folders infected: 0
  Files infected: 6

  Process memory infected:
  C:\Documents and Data\Microsoft\svchost.exe Data (Trojan.Downloader.Gen)-> unloaded successfully process.
  C:\Documents and Settings\Temp\dwm.exe owner (Trojan.Downloader.Gen)-> unloaded successfully process.
  C:\Documents and Data\Microsoft\Windows\shell.exe Data (Trojan.Shell)-> unloaded successfully process.

  Memory infected:
  (No malicious items detected)

  Infected registry keys:
  (No malicious items detected)

  The registry is infected:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\svchost (Trojan.Downloader.Gen)-> quarantined and deleted successfully.

  Infected registry data items:
  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell (Hijack.Shell)-> Bad: (explorer.exe, C:\Documents and Data Data\Microsoft\Windows\shell.exe) good: (Explorer.exe)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Infected files:
  C:\Documents and Data\Microsoft\svchost.exe Data (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
  C:\Documents and Settings\Temp\dwm.exe owner (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
  C:\Documents and Settings\Temp\1EF.exe owner (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
  C:\Documents and Settings\Temp\24D.exe owner (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
  C:\Documents and owner Settings\Temporary Internet Files\Content.IE5\SCGCF3IX\update[1].exe (Spyware.Passwords.XGen)-> quarantined and deleted successfully.
  C:\Documents and Data\Microsoft\Windows\shell.exe Data (Trojan.Shell)-> quarantined and deleted successfully.

  What can I do about it.  I have windows XP, I got this HP pavilion 555e computer 6 years.  I'm still working, but I don't like the error messages.  Please let me know also where I can learn more about the errors of registry and files.

  try to click on start > run > msconfig

  then under the Startup tab, you will find entries that refer to the programs that are set to start automatically when windows starts.

  You can probably find one of the references corresponding to this faulty .exe and you can turn it off.

  by disabling, attempt to launch the inoculated program will stop and the error warning should also.

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• Get this error "C:\DOCUME~1\Owner\LOCALS~1\Temp\wgsdgsgddsgsd.ex."

  Original title: Matt R

  C:\DOCUME~1\Owner\LOCALS~1\Temp\wgsdgsgddsgsd.ex

  I get this error message? Can someone help fix? I have Windows XP

  It get when?

  When you restart?

  It appears that whenever he feels like it?

  There should be no file .exe running from the Temp folder, then why don't you clean up your temporary file using the disk cleanup or CCleaner you can download here:
  http://www.Piriform.com/CCleaner

  CCleaner allows you to manage most of the startup items and also do some other operations oriented cleaning.  Some people will you recommend is not to use the registry functions in CCleaner to avoid these features for now.  I have no problem with it for me, but sometimes it's a contentious issue, I prefer to avoid as much as possible!

  You can uninstall CCleaner later if you don't like it.

  So is looks like your system is currently or has been reached by the malware then do this:

  No matter what you use for protection against malware, perform the following analyses for malware, then correct any problems:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time):

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  They can be uninstalled later if you wish.

  The scans by operating clean, restart, and then fix any problems.

  If you still have the problem, we can get hard with her if necessary...

• Following error message if poster "could not load C:Users/Owner/Locals~1/temp\msavvzczh.exe.

  Following error message is displayed "could not load C:Users/Owner/Locals~1/temp\msavvzczh.exe how to remove the registry."

  Remove it from startup.  Start/Run, type msconfig. Delete it under the Startup tab. Its probably malware

• I have the file under owner/Local Settings / temp which fills up as soon as I move everything to the trash. There now 2743 files it contains. How can I stop this?

  What is this file: owner/local settings/temp, it fills as soon as I put everything in the trash.  At the moment there are 2743 files it contains.

  Hello

  Temporary files are created by Windows that remain on the hard disk due to an irregular output of a Windows session.

  Some programs create temporary files and then leave them - they do not delete. This can happen because the program crashed or the developer of the program simply forgot to add the necessary code to delete the temporary files after the program is done with them. Temporary files left by the programs accumulate over time and can take up a lot of disk space.

  You can delete temporary files from the computer to improve the performance of the computer. Follow the article to the same thing:

  Using disk cleanup

  Hope the helps of information.

• How to fix thisand related errors C:\DOCUME~1\Scott\LOCALS~1\Temp\8e91_appcompat.txt

  When I open my file to load down, either online or offline file freezes the pc and I get this message

  C:\DOCUME~1\Scott\LOCALS~1\Temp\8e91_appcompat.txt I have down loaded a fix? and may have gotten a similar message-

  Hello scottmc ny,.

  What version of Windows XP and service pack are you running?  You only an error when you access your download folder or this happens with other folders?  If the system works, what do you think might have changed since the last time it did not work properly?

  Little matter that you use for malware protection, that

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  Restart your computer and solve the outstanding issues.

• C:\DOCUME~1\Fery\LOCALS~1\Temp\13b_appcompat.txt - Este Acesta message care imi apare cand pornesc jocul Age of Empires 2. This his college ca trebuie sa-mi porneasca jocul?

  C:\DOCUME~1\Fery\LOCALS~1\Temp\13b_appcompat.txt - Este Acesta message eroare care imi apare cand pornesc jocul Age of Empires 2. This his college ca trebuie sa-mi porneasca jocul?

  Hi feryco66,
   

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• "error opening file for writing" C:docume~1\user\LOCALS~1\Temp\OpenCandy\OCSetupHlp.dll, as I am trying to install a program.

  I come with a message "error opening file for writing" C:docume~1\user\LOCALS~1\Temp\OpenCandy\OCSetupHlp.dll, as I am trying to install a program.

  Any ideas what is happening?

  Thank you

  Hi and thanks for your time.

  The program was an application to create your own music

  I don't have any problem installing other applications programs...

  The solution was a scan with malware bytes who discovered infected with the registry data.

  So I deleted it and after running a lot on the line scans, I deleted the program, I wanted to install.

  Everything is still better then...

• XP user account being of error "Windows cannot find c:\documen~1/user/locals-1/temp/crss.exe. Make sure you typed the name correctly.

  Hi, I have two problems

  First on my brothers account, I get the following error message: windows cannot find c:\documen~1/henry/locals-1/temp/crss.exe. Make sure you have entered it correctly the soul. In this story, I can't click anything that runs - IE without access to the internet or anti-virus software, I think its something to do with rstrui.exe or rundl32.exe.

  Secondly, I do not get the first error message on my account but I can't run any programs. He can't know what to use to open it. But the guest account seems to work very well.

  I think I have a Trojan horse, which is messing with my registry. I tried my computer with anti-spyware and malware scanning software, but it is no longer showing me what is infected, in safe mode with network. I tried "SUPERAntiSpyware" and "Malwarebytes' Anti-Malware.

  I looked on the internet but nothing I tried works. Please can someone help me.

  Thanks in advance.

  Hi Robzy_k4,

  You will need to update your antivirus and run a full scan of the system in safe mode, until you see that your system has no infection found.

  Once your system is virus-free, your desktop and eerything should be normal. It is likely that you are not able to open exe files open with dialog box:

  You will need to rename regedit.exe to regedit.com (my computer-> tools-> option-> view file-> remove tickmark to "Hide extension for known file types"-> ok-now right click on local disk C:\WINDOWS\ online search of regedit.exe rename regedit.com).

  Then click on Start-> Run Type &-> Regedit-> ok.

  Go to HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command
  (you will have to press on + to achieve order)

  Now, double-click default slot right windows and then change the value in this box for '%1' % *.

  Repeat the same for HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command

  Close regedit, restart your pc and check if its working.

  Now on the connection of your brother, once all the steps above are performed, click Start-> run, type & -> regedit-> ok navigate to HKEY_CURRENT_USER-> software-> Microsoft-> Windows-> CurrentVersion-> Run and on the right side, find the key that point to crss.exe in the temporary location and delete it.

  You can also check: http://support.microsoft.com/kb/310585

  I hope this helps.

• WARNING message windows has recovered from a mistake serious c:\docume~1\hp_owner\locals~1\temp\wer2a35.dir00\mini100311-ol.dmp

  I got this warning message. what it means?

  This means that there was a mistake of some sort and diagnostic information (aka a "memory dump") has been created and saved to the specified location.

  If other things seem to work OK, ignore the message.

  What were you doing when the warning message appeared?

• c:\DOCUME~1\hp_adm~1\temp\dwm.exe and windows c:\windows\srst40.dll load error (this message appears on initialize to top

  We had a couple of young teens visit and after that they used it, everything went wrong.

  We cannot use Internet Explorer. It is not connected or crashes.

  Outlook e-mail working properly and we have problems with programs the impression.

  try to launch the system restore and run a restore date prior to the changes

   

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

  .

  "Joe E M ay" wrote in message news: e0976b4b-96d 0 - 424 b-b85c-56ef30d1e0cf...

  We had a couple of young teens visit and after that they used it, everything went wrong.

  We cannot use Internet Explorer. It is not connected or crashes.

  Outlook e-mail working properly and we have problems with programs the impression.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Registry DWM.exe error at startup

  I get a registry error message whenever I start my desktop computer.

  The error message is: 'cannot load or launch 'C:\Users\admin\AppData\Local\Temp\dwm.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry. »

  This problem started after I ran SuperAntiSpyware. I tried to use CCleaner and Advanced System Care programs to fix this registry, but they did not work.

  How can I solve this error?

  I want to be careful to make changes to the registry.

  My PC is an HP m8120n under Windows Vista Home Premium desktop.

  Solutions:

  1. upgrade the graphics card drivers
  2 repair the registry
  3 run the 'Desktop Service Manager' Service
  4 disable the DWM. Boot to the EXE file entry
  5. run some commands
  6 analyse the system files for Corruption
  7 restore the system to a previous state

  Update graphics card drivers

  To correct this error, try upgrading your graphics card. Visit the manufacturer's Web site and download the appropriate compatible drivers for your computer.

  Or otherwise,

  1. click on start.
  2. type device manager in the start search box.
  3. press ENTER.
  4 expand your computer name, then the graphics card.
  5. right click and select the update option.

  Repair the registry

  Repair the registry by using a good registry cleaner software.

  Run the 'Desktop Service Manager' Service

  DWM. EXE error may occur if the Desktop Manager Service does not work. Start using Services Manager this service as shown below:

  1. download System Utilities software.
  2. click on the Service Manager tab.
  3. Select the desktop Service Manager service.
  4. click on the Start button.

  Disable the boot file entry

  In case your antivirus program deleted a virus infected, but have not deleted the corresponding Startup registry keys, this error can occur. To resolve this issue, disable this entry.

  1. click on start.
  2. type MsConfig and press ENTER.
  3 click the Startup tab and uncheck the entry with the file.
  4. click on apply. Ok.

  Run some commands

  Execution of orders supplied with the command prompt can fix DWM. EXE error. Follow these steps:

  1. click on start.
  2. type command prompt in the search box.
  3. press ENTER.
  4. Enter the following commands:
  CD %windir%\system32
  WScript slmgr.vbs - rearm
  5 restart the computer after the end.

  Scan the system for Corruption files

  DWM. EXE error may occur when the DWM. EXE system files is damaged. Replace this file with the original version can fix the error.

  1. Insert the Microsoft Windows installation disc.
  2. click on start | Run.
  3. type SFC/scannow, and then press ENTER.
  4. follow the directions in the wizard.

  Restore the system to a previous state

  By using the system restore, restore all changes made to your system to a previous state. Here are the steps to fix the DWM. EXE Error:

  1. click on start.
  2 type system restore in the search box.
  3. press ENTER.
  4. follow the instructions of the wizard your own.

• Error.' c:\docume~'\earl\locals~1\temp. A temporary file needed for initialization could not be created or cannot be written in ' when try to run 16-bit programs in windows xp computer at home.

  original title: 16-bit windows subsystem error

  I was able to run 16-bit programs on my computer with windows xp home edition. now when I try to open the program I get a 16-bit windows subsystem error. c:\DOCUME~'\earl\locals~1\Temp. a temporary file needed for initialization could not be created or cannot be written to. Make sure that the path exists, and the space is 'close' to teminate the application available.choose

  Hi EarlBettencourt,

  You can follow this link & check if the problem persists:

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  Hope the helps of information.