Dynamic key record

Similar Questions

• Key records is not on Satellite C660

  The keyboard on my month Satellite C660 often doesn't seem to work properly 100% - lack of characters, double and generally does not record the capital letter when you use the SHIFT key (shows apital rather than Capital). It is intermittent then maybe a software issue - something running in the background and taking up resources (although surprising because it is a fairly fast machine).

  I have Office 2010, Kaspersky, and is normally connected to the internet through a USB router.

  Has anyone else had this problem or found a solution?

  Hello

  Here there are similar topics in the forum on the behavior of the keyboard on Satellite C660. Have you found these topics?

  The problem can be easily solved because a BIOS update to the latest version:
  [Keyboard issues with Satellite/Satellite Pro L670 & C660 series notebooks | http://aps2.toshiba-tro.de/kb0/TSB1103370000R02.htm]

• Need help on the issue with wireless connectivity on Win7 - dynamic key exchange did not within configured time

  Hello

  I get below error when you try to connect to the wireless router. It was working fine until a few days back.

  InterfaceGuid {1F8AA774-8AE0-48BA-87EB-5522A6070F3E}
  InterfaceDescription Dell 1540 802.11a/g/n (2.4 GHz/5 GHz) Wireless
  ConnectionMode automatic connection with a profile
  BSSType infrastructure
  Key exchange dynamic FailureReason failed within configured time
  Used 294917
  ConnectionId 0x9

  What is the reason code 294917?

  Any help to solve the problem would be useful.

  Kind regards

  Srinivasa

  Hi Richard,

  Thanks for the quick response.

  I tried diff incl. power options. Nothing has worked.

  Finally, I reset my router unit today and it works now.

  Hope that this issue would not yet :-)

  Kind regards

  Srinivasa

• What are the advantages and disadvantages of the two "listener: Dynamic & static record.

  Hello
  What are the advantages and disadvantages of dynamic registration of the listener?
  and
  What are the advantages and disadvantages of the static recording of the listener?
  
  Thank you
  Uday

  Some facilities (for example, restart with the Data Guard Broker) will not work unless you appropriate defne registered staticly service. Other facilities (failover of such service) do not work unless you use a dynamically registered service.
  Decide what you want to implement and configure registration accordingly. There is no "advantages and disadvantages".

• Universal time and dynamic data record

  Hey guys, fundamental question.

  I have a pressure transducer unique that I record the data of.  I want to have a single button that the user can press to start recording and have the same button to stop recording.  I suppse capture what is the user, I would like to see updates periodicals what sees the DAQ assistant.

  The problem I have is that the timestamp of the data file is repeated for each cycle of the DAQ assistant.  Which means, if I record two cycles to 5 Hz and 5 samples, my time is 0,.2,.4,.6,.8, 0,.2,.4,.6. 8 see it repeats.  Ideally I'd like it to go like this 0,.2,.4,.6,.8, 1, 1.2, 1.4, 1.6, 1.8. I am attached the VI and the sample output.  I appreciate any help you guys can provide.

  John

  How do you use your VI?

  It runs only once stops.  It doesn't have a while loop for several iterations.

  Please don't tell me that you are using the run button continues and the button abandon.  They are only for debugging purposes.

  If you put some time a loop around your code and use a real stop on your front button, you will see that it works fine.  Continuous running is not identical to a while loop.  It is rather, run, run once again, run again, run again, always restart the VI until you hit the abort button, which is what is causing your time stamps to restart.

• How can I dynamically update records LCO for multi-inquiry forms in E10?

  We have recently upgraded to E10. The migration has apparently disappeared with a few hiccups, but there is no major errors.

  However, today, I came across an obstacle that I can't solve. We have landing pages that allow people to select several products on the form (e.g. Product1, Product2, etc.). The shape will collect the data and send the call suitable for SFDC.

  Here's where our business processes creates conflicts. In E9, we were allowed to update the table of perspective and Exchange on product codes based on the values of the HTML form. E10, we use CDO and update processing step allows more 'static values' of allowing only the mapped data. I found that the "CDO - with Custom Values update" will work but only for a CDO row. Our business process requires registration BY product. If you select three products, you will have three rows of data, each with unique product codes.

  How can I get on the ORDER of one-to-many of these products? Such a thing is possible in E10? Please note that we use the unique key in our CDO to allow one-to-many recordings.

  Todd

  We found a solution for this, and it's far from perfect. You must create a 'form CDO update' step computer and map your fields. This seems to give you a "handle" to the object; to update a field in a static value, you must insert another stage of "Update CDO of Custom Value" * immediately * after that to set your domain to the desired value. Order is very important. It seems to work.

  However, there is a problem. You cannot change the order of the processing steps. If get out you them in some sort of command, you must remove and re-do them in order. Eloqua has promised this be fixed in a next version...

  Hope this helps someone else!

  Todd

• Only of first line of the dynamic table records in pdf format

  Please help me with this.  I have a dynamic array in an xdp which can be transformed by adding lines (called the details).  It seems to work in the browser, when I edit.  However, when I save as pdf, saves only the top line.  No idea why the entire table is not save the PDF?  Thanks in advance.

  I compared files markup of the xdp to form that works and one that does not.  I found that there is a line named templateDesigner expand {BTW dough doesn't seem to work in this window here, which is irritating}.  In any case, the form that did not work, it was 0 and in those who worked it is 1, so I guess that's why.

  I wanted that are correlated with a checkbox in the hierarchy of the Adobe Livecycle Designer GUI, but I would not again and now I have other projects to work on.  However, I hope this will help others with this problem.

  If anyone knows where the checkbox for this is the hierarchy in Adobe Livecycle architects, thanks for posting here.

  I used the tool of comparison was SVN diff, which opens WinMerge if installed on your machine.  The two form of work in a * powerful * tool of comparison.

  Of course, the xdp editing can be very risky, so be careful if you go this route.

  Thank you!

• dynamic keys in report

  Hello
  
  I want to use a button or better an image in a report, which should trigger a dynamic action (of course without reloading the page).
  Suspicion is how do?
  
  Best regards
  
  Michael

  Hello

  Here's an example for you: http://apex.oracle.com/pls/otn/f?p=2071:205

  Here, you can see how to use AJAX to perform DML (delete in this example) and then refresh the interactive report.

  Kind regards

• Dynamic key Code text box

  For the life of me I can't figure out why this code doesn't work!
  I can't have an a key to diplay strock ASCII value in a text box. Any idea?
  
  Here is the Code:
  
  sentence of the var: String = new String();
  var keyListener:Object = new Object();
  keyListener.onKeyDown = function() {}
  myText.text += string.fromCharCode(0)) (Key.getAscii ());
  trace ("\tThe key code is:" + Key.getCode ());
  trace ("\tThe ASCII value is:" + Key.getAscii ());
  
  If ((Key.getCode ()) == (13)) {}
  myPlay.play ();
  }
  };
  Key.addListener (keyListener);
  

  Kglad,
  You are great!
  It is much better than what I had!

  Thank you!!! :)

• Dynamic keys

  Hi, I do an Viewer that loads in the images and their info from XML. I'm wanting to have a list of the titles of the pictures, and by clicking on a title shows that the image. I analyzed the XML in a table, and I use a loop TO go through the table and create a sprite of project_btn, which contains a textfield project_txt it to see its name. As part of the loop, I add an event listener to listen a ROLL_OVER event, which, for now just trace the name of the project_btn. The problem I have is that it seems only to add the eventListener to the LAST project_btn... so the others are useless.
  
  Code below:
  
  private void drawNavList() {}
  navList = new Sprite();
  navList.x =-(showWidth/2)-195;
  navList.y = - 50;
  addChild (navList);
  
  var projectID:Number;
  
  for (projectID = 0; projectID < numberOfProjects; projectID ++) {}
  var project_btn:Sprite = new Sprite();
  var project_txt:TextField = new TextField();
  format. Size = 14;
  format. Color = signflairGrey;
  format.font = font.fontName;
  format. Align = "center";
  
  project_txt. Text = sectionData [projectID] [0];
  project_txt.setTextFormat (format);
  project_txt. Background = true;
  project_txt. BackgroundColor = 0xff0000;
  project_txt. Selectable = false;
  project_txt.embedFonts = true;
  project_txt.y = 20 * projectID;
  project_txt. Width = 165;
  project_txt. Height = 14;
  project_btn. Name = String (projectID);
  
  project_btn. AddChild (project_txt);
  project_btn.addEventListener (MouseEvent.ROLL_OVER, projectOVER);
  
  navList.addChild (project_btn);
  } //for >
  } //drawNavList >
  
  private void projectOVER(e:Event) {}
  trace ((e.Target). (Name)
  } //projectOVER >
  
  Would appreciate any ideas or suggestions.

  Ah... never mind, it turns out that the code above is what it should, all the other securities that happened to be sitting under another button hit area so the eventListener was not pass through.

• "key down" event dynamic detection called screw

  Hello

  following situation:

  An event using 'touch down' / structure, my reacts on any vi event. Now, I call this vi dynamically by an another vi and load its façade in a panel of sup on the Panel of the calling vi. When running on a panel of sup, the detection of events of the called vi is no longer in effect. How can I save the vi called for the event 'touch down '? I played a bit with the registration of dynamic events, recording aspects of the vi calling to the node for event registration, but yet I have not found a solution.

  Any advice is welcome.

  Thank you

  Peter

  Stoeckel,

  Looks like you have 2 structure current events consecutively, if it is a no no. To run an event structure on an external event structure vi must be dynamic, as you mention above. I would like to check that I'm using the right reference of vi to the node of structure dynamic event block diagram.

• is there a limit on the length of maximum dynamic license key?

  Hello

  Our dynamic keys are 32 characters long. However, we are receiving reports back from users with licensing issues. Download reports are showing the fixed keys 24 characters.

  Is anyone aware of a maximum key length limit?

  Thanks for your help

  Figured it out. content-length missing! All is well again

• Dynamic test of license key on AppWorld main data Application Page

  I tried for four days to get a response from good test of the new App World Application data application page.  In fact, it's amazing what we do after a few days of frustration.  It turns out, I think that's the problem, not me!

  The test for claims to send:

  POST strokewatchkey.ashx HTTP/1.1
  Content-Type: application/www-url-encoded
  Host: www.mywebsite.com

  [email protected]&product=Strokewatch&version=1.0&TransactionID=123&test=...

  When I finally looked at what they actually send, IT TURNS OUT THAT THEY ARE NOT SENDING THE QUERYSTRING, they are just on my Web page without arguments!

  This explains why I could get a correct answer if I just return a test string and have the answer to fail when I actually try to calculate a dynamic key.  The site keeps returning a Content-Length 4!

  Took me a day to believe there was nothing wrong with my code and focus on the Content-Length that was returned, which is "key =".   That's when I realized that my dynamic key length was a nullity.  It turns out that it sucks because APP worlds was not send a query string as they say they are, there is not all the variables to be used to create a KEY DYNAMIC REQUEST!

  All this makes me wonder how many people is actually using the dynamic keys, they could certainly not a good response to the presentation.  Or maybe they just ignored the test and finished with the presentation.  Is this a known issue with their application?

  I think there is a misunderstanding about how works http POST. The query string will not appear in the url, but it is sent as the content of the POST request. Your script that receives should be expected to POST data, not the data in the url (GET). In PHP using $_POST ["PIN"], etc.

  The Content-length of 20 is a mistake, although an example. The length of the content should be EXACTLY the number of characters in the returned data. In the case of the example, 15.

  Finally, the data displayed are already coded url. The = sign should be left as-is back as a part of system data. The example response is therefore quite correct except for the length of the content.

  For example if your key generated from the SPINDLE is 12345 is 9 content-length then return the string:

  key = 12345

  Hope that helps.

• How to pass the Record of entry to the dynamic SQL Code

  Hi all

  I am trying to run under Oracle applications API on the remote database using DB Link. I try to run using dynamic SQL. Part of the code is given below.

  DECLARE

  l_batch_info_rec wsh_picking_batches_pub.batch_info_rec;

  l_rule_id NUMBER;

  l_rule_name VARCHAR2 (240);

  l_batch_prefix VARCHAR2 (240);

  BEGIN

  l_batch_info_rec.document_set_id: = v_document_set_id;

  l_batch_info_rec.order_type_id: = v_order_type_id;

  l_batch_info_rec. Default_Stage_Subinventory: = v_default_stage_subinventory;

  l_batch_info_rec.pick_grouping_rule_id: = v_pick_grouping_rule_id;

  l_batch_info_rec.pick_sequence_rule_id: = v_pick_sequence_rule_id;

  l_batch_info_rec.autopack_level: = v_autopack_level;

  l_batch_info_rec.autopack_flag: = v_autopack_flag;

  l_batch_info_rec.ac_delivery_criteria: = v_ac_delivery_criteria;

  l_batch_info_rec.backorders_only_flag: = v_backorders_only_flag;

  l_batch_info_rec.existing_rsvs_only_flag: = v_existing_rsvs_only_flag;

  l_batch_info_rec.customer_id: = v_customer_id;

  l_batch_info_rec.order_header_id: = v_header_id;

  l_batch_info_rec.from_scheduled_ship_date: = NULL;

  l_batch_info_rec.organization_id: = v_organization_id;

  l_batch_info_rec.include_planned_lines: = v_include_planned_lines;

  l_batch_info_rec.autocreate_delivery_flag: = v_autocreate_deliveries_flag;

  l_batch_info_rec.autodetail_pr_flag: = v_autodetail_pr_flag;

  l_batch_info_rec.allocation_method: = 'I ';

  l_batch_info_rec.pick_from_locator_id: = NULL;

  l_batch_info_rec.auto_pick_confirm_flag: = 'n';         -The value manually to run Transact order

  l_batch_info_rec.autopack_flag: = 'n';         -Manually configure to perform the manual packaging

  l_rule_id: = NULL;

  l_rule_name: = NULL;

  l_batch_prefix: = NULL;

  v_sqlstmt1: = ' START

  wsh_picking_batches_pub.create_batch' | g_db_link | "(1.0,

  fnd_api.g_true,

  fnd_api.g_true,

  : l_return_status,.

  : l_msg_count,.

  : l_msg_data,.

  : l_rule_id,.

  : l_rule_name,.

  : l_batch_info_rec,.

  : l_batch_prefix,.

  : p_new_batch_id

  );

  END;';

  --

  EXECUTE IMMEDIATE V_sqlstmt1

  With the HELP OF THE l_return_status,.

  ON l_msg_count,.

  ON l_msg_data,.

  BY l_rule_id,

  BY l_rule_name,

  BY l_batch_info_rec,

  BY l_batch_prefix,

  OUT p_new_batch_id;

  --

  END;

  After you run this script, I get below error "PLS-00457: expressions must be SQL types ' for variable l_batch_info_rec which is of type record. can someone please guide me how can I pass variable type dynamic SQL record.

  Thank you

  Priyanka

  Food for thought:

  On remote db:

  SQL > create or replace
  package 2 pkg
  3 is
  4 type r_type is (record
  Number 5,
  6 name varchar2 (10)
  7                            );
  (p) 8 procedure
  9 p_rec in r_type,
  10 p_out out varchar2
  11                  );
  12 end;
  13.

  Package created.

  SQL > create or replace
  package 2 body pkg
  3 is
  4 procedure p)
  5 p_rec in r_type,
  6 p_out out varchar2
  7                  )
  8 is
  9 start
  10 p_out: = "ID = ' |" p_rec.ID | 'Name =' | p_rec. Name;
  11 end;
  12 end;
  13.

  Package body created.

  SQL >

  On local db:

  SQL > set serveroutput on
  SQL > declare
  v_rec 2 pkg.r_type@pdb1sol12;
  3 v_out varchar2 (50);
  4 start
  v_rec.ID 5: = 1;
  6 v_rec.name: = 'XXX ';
  7 immediate execution"
  8                        begin
  9 pkg.p@pdb1sol12 (: 1,: 2);
  10                        end;'
  11 using v_rec,
  12 v_out;
  13 dbms_output.put_line (v_out);
  14 end;
  15.
  using v_rec;
  *
  ERROR on line 11:
  ORA-06550: line 11, column 20:
  PLS-00457: expressions must be SQL types
  ORA-06550: line 7, column 5:
  PL/SQL: Statement ignored

  SQL > declare
  2 number of v_id: = 1;
  3 v_name varchar2 (10): = 'XXX ';
  4 v_out varchar2 (50);
  5. start
  6 immediate execution"
  7 report
  8 v_rec pkg.r_type@pdb1sol12.
  9                        begin
  10                            v_rec.id  := :1;
  11 v_rec.name: =: 2;
  12 pkg.p@pdb1sol12 (v_rec,: 3);
  13                        end;'
  14 using v_id,
  15 in v_name,
  16 v_out;
  17 dbms_output.put_line (v_out);
  18 end;
  19.
  ID = 1 name = XXX

  PL/SQL procedure successfully completed.

  SQL >

  SY.

• IOM 11 GR 2 - Configuration of automatic approval for automatic recording - organization field

  Hello

  I am trying to configure automatic approval of record auto in OIM 11 g 2.

  I read a lot of links (a relative majority of 11 GR 1 material) but I'm still not able to do this due to the field of the organization being approver only

  I tried to use an adapter to prepopulate (as I do with success with the 'role' attribute) and a search query. None of this has worked.

  I found out that someone did the same steps as me, but the debate is closed without response: Re: configuration of automatic approval for automatic recording - fail because the organization.

  Any advice to achieve this in GR 2 11?

  Thanks in advance

  This message was edited by: 2808590

  In the case where a person is confronted with the same question, I solved it by using an event handler to pre-process on user create.

  The following link can give some advice: identity and access management: automatic approval for Self-Register users - OIM 11 g R2

  To get dynamically key of the organization by the name of the Organization, you can use it in Manager:

  The value attrRet = new HashSet();

  attrRet.add (OrganizationManagerConstants.AttributeName.ID_FIELD.getId ());

  Organization org = orgManager.getDetails (orgName, attrRet, true);

  Object orgKey = org.getAttribute (OrganizationManagerConstants.AttributeName.ID_FIELD.getId ());

  return (Long) orgKey;