Dysfunction of adapter XDCA.

Similar Questions

• Satellite L40 - dysfunction AC adapter

  I bought my son a Satellite L40 for Christmas that he was really nice to receive. Everything was going well until April this year when it just stopped working.
  While it was easy enough to repair booking, trying to get through DHL took me several attempts for 4 days before I had to arrange collection.

  The laptop was returned repaired in little more than a week and my son was happy to get it back. The Councils note that we said that the power adapter and the BIOS/FW update have been replaced.

  Everything was working fine until this week when the AC adpater failed once again and the battery is not being charged. Yet once, we went through all the controls, as mentioned in the resolution of the problems, but once again no joy. No light, no power, nothing.

  So now we have a Satellite in its box that my son cannot be used, and it is only 7 months old.

  Anyone knows if this is a common fault, or are we just not lucky to have had the same problem occur twice in 7 months?

  (X-)

  Hello

  In my opinion, you just had a bad luck.
  In your case it s boring a power adapter is dead for the second time, but those issues could still happen...

  Just one example; I had a problem in my car and we fixed a week later, the same symptoms appeared the technician checked again and said that one of the parts that have been replaced last week is dead once again I thought; What a £ $%
  However. The component has been replaced again and now everything is ok

  + Bad luck + belongs to life too you know

  I wish you now + luck + with the new replacement

• C70 - AC adapter / CC not enough load & causing the satellite failure

  Hello

  Didn't have any problems with the laptop again, except the power adapter.
  I noticed one thing, it requires just enough to keep the laptop, especially during physical or virtual games.

  But this isn't really a big problem, it's all just boring from time to time because I use it for school and I sometimes turn off just so that the battery can recharge a little bit. But you'll get used to that.

  But the second problem is worse elsewhere.
  Sometimes, when I connect my power adapter (even without the phone connected), it could cause a power outage and I have to change the circuit breaker. He was already held for the second time in four months, and I'm sure that there is a problem with the adapter.

  I'm not a native English speaker, so I couldn't quite understand.

  Data sheet:
  Type of laptop: Toshiba Satellite C70 - A - 17 c
  Article nr. : PSCEEE-00S006DU
  AC adapter model: PA5035U-1ACA
  Bought: May 26, 2014

  Kind regards
  Luuk

  Somehow the whole story seems strange to me.
  First the AC adapter should provide enough power to recharge even running some applications of high performance game.

  Second question also sounds very strange and I guess there must be some sort of dysfunction Ac adapter.
  I recommend you contact Toshiba service guys in your country in order to check the AC adapter.

  In case of hardware malfunction, the part needs to be replaced. Guarantee is valid?
  In this case, that the room should be replaced free of charge.

• Dysfunction of the AC adapter / CC - TS HP ENVY 15-j053TX

  I just got my phone yesterday. After several times in and out plug to the power cord, I have to reload my pc. However, I face the same problem again today and I'm unable to load. Currently, it has run out of battery.

  Please help solve my problem as soon as possible.

  Hello LHTAN,

  Welcome to the Forums of HP Support! I understand that you are not able to recharge your HP laptop. Can you please let me know the exact modellaptop that you use? Please select your operating system from the options below to start testing your battery:

  Test the battery (Windows Vista)

  Test and calibrate the battery (Windows 7)

  Test and calibrate the battery (Windows 8)

  If you still have problems with the battery not charging, I suggest to call our technical support at the 800.474.6836. If you live outside US / region region of the Canada, please click on the link: contact HP support.

  Thank you in advance,

• BASIC WINDOWS 10 DISPLAY ADAPTER; NVIDIA WENT :(

  NVIDIA WINDOWS 10 JULY 2016

  Windows 10 has an update for the video card or the driver game. Have tried to update to basic display adapter already. Looking for a software from Microsoft or another place that will cause the game and other performance of the computer to function properly. What Nvidia or other software can I use with it. HP doesn't have a software update for Windows 10 drivers that I could find.
  OPERATING SYSTEM & COMPUTER SPECS.

  HP Compaq Presario - CQ 5320F (model # ABL - AY030AA - CQ5320F) (purchase, April 2010)
  Windows 7 Home Premium (original with computer software) (Windows 10 Home Download free July 2016)
  Processor: AMD Athlon™ II X 2 240 2.80 GHZ (2 cores)
  Memory; (RAM) / 3 GB
  Grahpics: NVIDIA Geforce 6150SE nforce 430
  Games graphics: available total graphics memory 1407 MB
  Hard drive: 391 GB Free(455GB Total) February 2016: 64 bit 1 terabit Seagate hard drive replaced original westgate crushed 500
  GB HDD (reinstalled Windows Home Premium software in the new hard drive until Windows 10 Home free
  updated July 9, 2016
  Display adapter
  driver version: 8.17.11.9739
  DirectX version: 9 or more
  System type: 64-bit operating system, x 64 processor

  July 2016 after Windows download free 10
  Device Manager

  IEE ATA/ATAPI controllers
  Version of the NVIDIA 11.1.0.33 driver
  Driver date: 2009-08-04
  Digital signer: Microsoft Windows Hardware Compatibility Publisher

  The driver file details: C:\WINDOWS\system32\DRIVERS\nvstor64.sys
  All the other driver files say System 32

  Second list under IEE ATA/ATAPI Controller
  Loction: Bus PCI 0, device 8, function 1

  Display adapters

  Microsoft Basic graphics card
  General: Bus PCI 0, device 13, function 0
  Driver: Microsoft 2006-06-21 version 10.0.10586.0
  System 32

  Control Panel
  System & Security - Flash Player (32-bit)
  Programs - Java (32 bit)

  INCIDENT DETAILS

  Could not get auto detect NVIDIA after downloading the required java update.
  I tried recommended NVIDIA installation manual and it said that it was incompatible with the material.
  Tried the manual download from HP, no compatible version site.

  Games & APP dysfunction / Internet Explorer Edge

  Some applications closed and window down to the right indicating the display driver stopped responding...

  Some games worked in freeze frame.

  Edge Windows closed when you click to open the new folder that I created in the bookmarks bar. Can click on links to Web sites.

  Desktop is not my resolution and to fix the screen, I must have websites and small icons.
  
  Part of the Office is on the left off the screen.

  Panel - hardware & Sound - NVIDIA Control Panel: when you click on pop up States; The extension of panel display NVIDIA cannot be created. Possible reasons include: Version mismatch. Reinstall the drivers may solve this problem.

  Hello:

  See this thread and use the graphic driver nvidia posted (32 or 64 bit depending on the case).

  http://h30434.www3.HP.com/T5/desktop-video-display-and-touch/NVIDIA-GeForce-6150SE-nForce-430-chipset-not-compatible-with/m-p/5173180#M41749

• Satellite C660 - AC adapter / CC load questions

  Hello

  Had some problems with my Satellite C660 charger. Seems to load to the top of the laptop and then decides that he is no longer connected to the electric network although it is plugged. When you pass this by continually.

  Is there a way to fix this or is the charger faulty or is it supposed to do this? My apologies if this isn't in the right section / a stupid problem.

  Thank you

  Hey Buddy,

  And what happens if you start your laptop with power adapter only? The laptop works properly without battery?

  At the moment it is not easy to say what it is because it might be all: battery, AC adapter, BIOS, dysfunction of the motherboard, etc.

  It would be good to know if everything works with AC adapter only. Also, check the Toshiba website if you can find a BIOS update for your model of C660 and update.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Don t forget to start the update as an administrator only and disable the Antivirus software.

• Satellite P100-277 by clicking on adapter and do not start

  My Satellite P100 does strange things. First it does not start at the top (the first time after it has switched mode all of a sudden, the second time, it's just did not start at the beginning of sleep), unless I removed the battery for an hour, and second the adapter makes a clicking sound when it is on the electronic card. Help! Who has an answer to this problem.

  Hello

  I don't think that the technician can help you
  What do you think???

  You said that the AC adapter makes strange noises?
  The adapter is maybe defective and dysfunctions and this may affect the functionality of the laptop

• Error code 31 MS ISATAP Adapter

  Not sure what happened, but I get this message error than MS ISATAP Adapter
  Device is not working properly. Windows cannot load the drive of the device so require.
  ROOT / * ISATAP/0000

  I went to MS and charged the driver, then he said I'm current and everything should be ok. However, in my device manager is always peripheral watch does not. I went to MS and then gave me three different websites to download additional programs to just a simple $30 and I can't correct the 19 drivers is said dysfunction is. I'm frustrated because I don't want to throw money at the problem. These programs say they are free but then I download the program to discover the questions and Yes, they are. However, now, it will cost money to register the product to RESOLVE the problem.

  Any suggestions to solve this problem would be greatly appreciated.

  Hi MonTQ,

  Welcome to the Microsoft Vista answers Forum!

  We receive the error code 31 if the device driver is not updated. As you have already updated the device try reinstalling the device driver and check if it works, if it does not resolve the problem, you can ignore the error message, link below will serve you more information related this topic:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx/KB/932520
   
  Steps to uninstall and reinstall the device driver:
   
  Uninstall and reinstall the device in Device Manager. Steps to uninstall the device:
  i. click on start, type devmgmt.msc and then on enter.
  II. Locate the Microsoft ISATAP Adapter device
  III. right click on the device and select uninstall
  IV. restart the computer to make the changes happen
   
  Uninstall and reinstall the card program and features. Steps to follow
  i. Click Start and select Control Panel
  II. in the Control Panel double-click the "Programs and features" icon
  III. here you can find all the programs and items that are installed in Windows Vista.
  IV. to remove the adapter click once on the program and then click Uninstall/change, and follow the prompts.
   
  Hope this information is useful.

  Let me know if it worked.
  All the best!
   
  Thank you, and in what concerns:
  Samhrutha G S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help to find an adapter for a third-party monitor

  Hi all! I find myself in need of a little guidance, and I hope that someone out there will have a quick n easy for me...

  I have a Mid-2011 27 'iMac. which has two ports Thunderbolt It is taken with a Wacom tablet that I use constantly, and the other is made by an external hard drive to a solid state, which has a built-in cable to Thunderbolt (no way to hang it on a different port). I also have a 27 "HP monitor that is currently connected via an HDMI USB adapter.

  The problem is that the HP monitor is actual "jiggy" - the USB does not seem fast enough to deal with requests for the monitor. It is almost unusable. I know I should run it via a HDMI adapter Thunderbolt, but as I have already mentioned the two my Thunderbolt ports are already in use.

  Someone at - it ideas? I need sort of three to two ports Thunderbolt hooks, but I can't seem to find anything for less than $300 that would work. (I am illiterate when it comes to the different cables, adapters, ports, etc., so I hope someone can point me in the right direction by using short words... Most of the products that I travel through list specifications that me Chicane).

  The monitor has two HDMIs and a VGA port, and my iMac has a Firewire 800 port, if that helps at all...

  2011 iMac have only 1 Thunderbolt port and there is no such thing as a Mid-2011, you must have an iMac of year later, if it has 2 ports Thunderbolt. All the 27 "iMacs, from 2012 to 2015 the current have 2 ports Thunderbolt.

• Mac book pro charger adapter

  I have a Macbookpro bought in May 2010 and need a new charger adapter. I need to know what adapter I need. I tried to read the table, but it was only in 2012. If someone knows that it would be useful to feet!

  Find the right adapter cord for your Mac laptop and sector

  https://support.Apple.com/en-us/HT201700

  

• Cable/adapter for use of 2007 iMac as a display for 2009 MacBook Pro

  I would use my older iMac as a monitor for my MacBook Pro. Want to know which cable and/or adapter I need help.

  The iMac is a 24 inch, Intel based since 2007 (6.1). 2 GB, 667 MHZ.  It uses iOS 10.5.8. Its port is a Mini-DVI video output.

  The MacBook Pro is a 15-inch (5.4) 2009. 4 GB, 1067 MHZ. It uses iOS 10.11.6. Its port is a Mini display port.

  Popular Wizard. Thank you.

  You must use a wireless or Ethernet connection and configure Virtual Network Computing. A 2007 iMac only supports video-, and cannot function without the standard display cable.

  (145067)

• I get no picture on the TV when using mini ipad with the Digital AV adapter.

  I get a white on my TV screen when I connect my mini ipad digital AV adapter except HDMI 1 showing in the upper left corner of the TV screen. My mini2 ipad works great with the same son and TV.  I tried two ipads with different TV but get the same result. The ipad mini works OK if not connected to the TV. Two minis are working on the same operating system setting.

  The Digital AV adapter can be finnicky.

  Have you tried simply unplug and plug the adapter with the HDMI cable connected with it?

  With the adapter always plugged into your iPad, have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to the dark and restarts with the Apple logo, then release them buttons?

  Good luck!

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Airport express to extend wi - fi using the adapter but NOT extreme airport

  Hello

  I am looking to buy an express airport in order to listen to music through my stereo and also create another network wireless upstairs in my house.

  My question is, I currently have no apple down wireless router and I have connected to a line adapter with an adapter of the power line on the floor. If I connect the airport express base station to the adapter on the floor, I'll be able to create another network on the floor as well as the flow of my music, even if the router that comes from the connection is not apple router?

  Thank you

  Andy

  If the floor of the Airport Express will be connected via the WAN port using a regular power adapter ethernet cable carrier online and will be in Bridged mode, you can create a wireless network to the floor. Not bridged mode, you can see double-NAT issues, which should be avoided.

• I want to iTunes adapter

  I want to iTunes adapter

  I want to itunes adapter