E-all-in-one printer 4630: the screen flickers

Similar Questions

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• HP Photosmart 7520 malfunctions of e-all-in-one printer on the clock

  This e-all-in-one printer from HP Photosmart 7520 bought last week and cannot issue to reslove the awakening. Printer goes to sleep as the value, and to wake up, BUT with an error message on the display. I tried AUTO ON / OFF and different sleep wait times but nothing helped.  I can't believe the USB cable or the PC/software is to blame because the wake-up printer, but in a State of dysfunction and should now be in the off position, then press. The answers to this problem.

  JMcKenzie2006,

  Welcome to the HP Forum.

  The following workaround solution should correct the problem - basically how to turn off the sleep function.  It works when all other options have failed to solve the problem: assigning static IP, small insect sacrifice, swearing, all sorts of settings...

  Be aware: I do not know the consequences - if any - turning off the sleep function.

  Printer PhotoSmart 7520 loses wireless - system Mode Timeout Set to zero

  Apologize up front for imprecise language and the way in which this must be done: is a solution and not a standard procedure.  Its use is optional.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• 520 TouchSmart all-in-One begins, but the screen is black.

  Hi all

  I had a Touchsmart 520 for 2.5 years (warranty expired it y a.5 year) and enjoy a lot of the computer.

  One day the screen flicked once, and since then, he's black.

  The computer is still active. I can turn it on and can be accessed via the network.

  The problem is that the screen.

  I ordered a new screen from ebay, but of no use. I got a new MB, but always the same question.

  I even tried to take graphics cards out there (as I thought Valentine's) and I tried to use the support of the onboard graphics, but still no use.

  So, new screen + Mo + LED backlite, the computer is running, but the screen is black.

  One to the rescue?

  Thank you

  Roye

  Hello again Roee,

  Thank you for the updated information and I can actually respond directly to the question of how it is connected. You're right it's the LG 6pin cable that provides power to the converter card, while the backlight is also connected to the converter card. I am providing you with a link to the list of HP parts store the parts of your computer where you can see the part number 654251-001 - rear panel light FFC (LG 6pin) 250 mm. You will also see the part number 653864-001-23 converter card which you may need to replace.

  You can also buy the parts there, too, if you wish.

  I was unable to locate the manuals or documents that would give you clear instructions on how to properly install the BACKLIGHT, but you can follow the basic steps in reinstalling the converter card that I have set out below:

  Step 1. Gently detach the connectors of power and backlight of the Board of Directors
  Note that the location of the connector backlight will vary according to the manufacturer of Panel
  Step 2. Remove both screws of the card and pull the jury on the PC
  Step 4. Align the two holes on the plate with the spacers inside the unit
  Step 5. Replace the two screws of the Commission of the converter
  Step 6. Replace the connectors of power and backlight to the Board of Directors
  Step 7. Set the DIP switch on the Board to match the configuration for panels manufacturers

  The configuration of the DIP switch for each manufacturer of Panel is painted stencil on the converter card itself

  Please re-post if you need extra support. Thank you again for post you on the HP Forums. Have a wonderful day!

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• How one properly installed more than one printer all-in-one (different) on the same pcr?

  Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

  Hello Boothkp,

  From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

  Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

  In case this does not work, then please give more information on the model and the operating system you are working on.

  Kind regards

  Van Baardewijk

• where can I find the product number for a HP Deskjet F4580 all-in-One Printer?

  where can I find the product number for a HP Deskjet F4580 all-in-One Printer?

  I typed 'to the HP Deskjet F4580 all-in-One printer"and the installation software cannot find the printer on the HP website.

  But it is the search manually separately via a different browser.

  So there must be another product number!

  Hello

  The following link shows his support site:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3944758

  You can find lots of information on 6 sections.

  Kind regards.

• 6280 all-in-One printer - changing of USB to Ethernet - error - connection cannot find the printer

  I am trying to reinstall my C6280 all-in-One printer on the product - my original installation CD was for a USB connection, I will reinstall for an Ethernet connection for use on our wireless network. I have the HP manual - install the software of the product in Windows XP for a wired network connection (Ethernet) - but get the error message - unable to locate the printer.   I plugged in the ethernet cable to the ethernet port on the computer and the router (Airlink 101).  Any suggestions on what I might hurt?

  Hello

  You can use the following link to install the printer on a wired n/w.

  http://support.HP.com/us-en/document/c01708573

  Just to confirm... Make sure that you connect 'printer and router using the ethernet cable.

  To make sure that your printer is found during installation, after plugging the ethernet cable, make sure that your printer is get a valid IP address.

  Menu - Network settings - display settings - display wired summary.

• Dell Inspiron 530sand by Kodak ESP5 all-in One Printer not detected in Windows Vista.

  Original title: cannot find the printer

  I have a s 530 Dell Inspiron and a Kodak ESP5 All in One Printer. The problem began earlier this year when attempts to print failed because of "jobs in"

  the pipeline "or something.  No matter what I did the same blocking returned.  I emailed Kodak and they spent ages uninstall/re-installing the

  software all for nothing helps.  Then I tried the automated Microsoft Fix it Center but I got nowhere so eventually abandoned.  Now I need the printer again only

  This time, I can't find any sign of it on the computer.  The icon at the bottom right has disappeared and when I bring to the top of the order page and click

  Printers, an empty box appears.  The usb cable has been replaced and tried other usb ports.  Nothing.  I tried the Fix it Center again and if

  anyone from Microsoft read this, was sent around in circles.  By clicking "Run" tells me there is a temporary outage preventing the Printer Wizard

  operating for two weeks?  And try to communicate with the web home page has a similar result, I like my email address is registered, but when I use it

  told me to use another, who is also rejected because the first is already registered. All this may be my fault I'm semi illiterate computerwise

  If no one can say why won't the computer to the printer, I would be very grateful and more if the answer was in terms laymans

  My thanks in advance

  Peter

  Hi Peter,.

  Thanks for posting this question in the Microsoft Community.

  I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you have any security program installed in the computer?

  2 what Microsoft FIXIT did you use exactly?

  I suggest you to install the drivers for the printer and check if it helps.

  You can also go through the steps in the article and check.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• All-in-one printer, Canon Fax L120

  Just upgraded to Windows 7, which MUST be compatible with this printer.  However the devices and printers, calls it "not specified" IE does not recognize it as a printer.  Tried to update downloan Canon drivers but no joy.  Any suggestions?

  Just upgraded to Windows 7, which MUST be compatible with this printer.

  Of course, Canon Fax L120 all-in-One Printer is compatible with Windows 7.

  Windows 7 Compatibility Center: Canon Fax L120 all-in - One Printer

  The drivers for your downloadable product here.

  Windows 7 32 bit

  Windows 7 64 bit

  Try to uninstall the printer from printers and devices and then plug in your printer. Now as soon as you connect your printer try to install the drivers.

• Router/HP PSC2175 all-in-One Printer

  Is it possible to connect my HP PSC2175 all-in-one printer into the USB port in my router wureless and set it up as a NETWORK printer, so I can use wireless to all 2 of my computers?

  Karibou

  Hello

  I have not it will work. You need a print server to handle this, because the network of the whole House knows nothing about the printer even plug into the wireless router. It is an example of a print server:

  http://www.netcomm.com.au/products/print-servers

  Kind regards

• HP Officejet 4630 all-in-one printer print cancels in the workplace

  Hello
  
  I recently bought a HP Officejet 4630 all-in-one printer, and it automatically cancels the work in the middle of printing. The computer I use is a dv7 HP Envy with 64-bit Windows 8, and I print on a wireless network connection. My computer receives an error that HP Officejet 4630 series could not perform printing and the printer just says Cancel. I tried all the steps in the sections troubleshooting, both printing and network connections problems. I've uninstalled and reinstalled the software several times, I created a manual IP address and everything, but nothing seems to work. It seems also that the issue when using HP ePrint. It occurs in all sorts of programs and formats such as word, pdf and html. Unfortunately, I did not receive a USB cord, I can't see if that will fix the problem at all. I hope someone can help me with this, otherwise, it is obvious that there is a problem with the actual printer, I have had and I have to return something else.
  
  Thank you

   

   

  This is how I fixed it:

  1. Find out what IP address, is that your printer uses.
  2. Go to control panel, then click "View devices and printers."
  3. Look for your printer right click.
  4. Click on "Printer properties" and a new screen opens.
  5. Along the top, you will see some tabs. Click on the one that says "Ports".
  6. Click on 'Add Port '.
  7. Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen opens.
  8. Click "next".
  9. Type the IP address of your printer, and then click "next".

  Your computer should find your printer.

  Click 'Apply' and your printer should work fine.

• Cannot sweep the all-in-one Officejet 4630

  Hi all - help needed please.

  Recently bought a printer all-in-one Officejet 4630 and had nothing but trouble, set-up and use it. After several attempts to put in place, everything is roughly in order, though I can't yet scan of the control on the machine Panel (I can scan only through "system preferences" under the apple icon).  Whenever I try to scan the engine control panel (and not through system preferences), using either the wireless network (Airscan or whatever it's called) or the USB cable, I have the following message on my laptop screen:

  Task is not available

  The task of "Photo (JPEG)" found on your device is not available on your system. Please select another task.

  The same thing happens if I try to scan to PDF. I use an old (c.2007 MacBook Pro) that runs the OSX10.9.5 Mavericks. Internet connectivity is not a problem because we have the right cable broadband. All I want to do is scan directly from the printer to my computer, preferably using a wireless connection. Help, please.

  Thank you

  Hi @nckbtlr and Happy Halloween!

  I'm sorry to hear about the problems you are having with your Officejet 4630. I understand that you are unable to scan from the front of the printer. I'd be happy to help you with this.

  In the spirit of Halloween, first I have to ask: what did the Mummy to tell the Agent from HP Support?    Let's wrap this case up!

  I suggest to uninstall and reinstall the software. Please follow the instructions below to complete a more comprehensive uninstall than basic uninstall. I know that these steps look long and convoluted, but I made it easy to follow and have confidence that these steps will solve the problem.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.