Windows security update does not (KB24119632)

Similar Questions

• KB2572073 this security update does not install

  This security update does not install what is anyone else having the same problem? I install and it says: it is installed and the next time I log in it reappea4s. Very annoying!

  Hi JimWaddell,

  ·         Have you tried the steps in the article of my previous answer?

  If this isn't the case, follow the steps in the article of my previous answer and let us know the results.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• My windows Security Center does not open and I get a notice that "no software firewall is detected.

  My Windows Security Center does not open, and I am also unable to turn on my firewall.  I get notification "not detected any firewall software.

  Hello

  It seems that you need help to solve the problem of Windows Security Center. Please respond to the suite, which will help us to help you in the right direction.

  1. do you get an error message when you try to turn on the firewall?

  2. which antivirus app do you use?

  Refer to the following information and check the status of the issue.

  See the section "Nithyananda J replied on November 27, 2009" what about Windows Security Center

  The windows Security Center service cannot be started.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Windows-Security-Center-service-cant-be/d8250e7a-ee3c-4302-8CA6-9e2a10262feb

  I also suggest you to run the Fixit from the following link.

  Diagnose and automatically fix problems of Windows Firewall service.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  You can also try to solve the problem by running SFC scan

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• FixIt center operating system is not compatible Windows and update does not work due to 8007066

  I have an Asus Essentio with Windows 7 Professional. Although the computer was working ok, I installed the FIX It Professional [I bought it to install on my computer to girls] for the interview. Since then, I had several problems with slow MSN Mail and slow performance. I uninstalled the product and to restore the computer to the date of installation of the software. Here are some of the problems I have:

  When you try to run Microsoft difficulty It Center I get a message "the operating system is not compatible and must be XP or newer" which it obviously. I've used this program in the past without any problems and actually have a user account, but it still does not work.

  Trying to access Microsoft support told me that the software is not "enabled" even though it says it's under System properties, and the product number is not saved, even if it has been for more than 8 months.

  Whenever I click on the MSN butterfly, a security message wonder if Explorer is allowed to make changes to my computer. Not a big deal, but remember why nobody liked Vista and I would like to get rid of him.

  A Windows Update does not work due the 8007066f, who doesn't have a solution, but updated logo keeps interrupting my work.

  Thanks for any help.

  I suggest an Inplace upgrade to fix your computer.

  The upgrade in place is a tool to fix the system. Thanks to the special upgrade process, we will be able to repair the system. The upgrade in place will not affect the settings like photos, movies, documents, etc. that are saved on the computer. Although this operation will not remove or modify the files and installed programs, I suggest always that you back up important files before you do. In addition, you may need to reinstall the device drivers after this operation.

  The detailed steps are included as below:

  On-site upgrade
  ====================
  1 log on to the system first.
  2. Insert the Windows 7 DVD in the DVD drive of the computer.
  3. Click Start and select computer.
  4. find the "setup.exe" file in the DVD-ROM and double-click it.
   
  5. click on install now.

  6. When you are prompted to enter the product key, please click Next directly without entering any key. The installation wizard will prompt and ask if you confirm to install Windows 7 without the key and choose please confirm.

  7. When you get to the screen ' which type of installation you want', click upgrade to upgrade the Windows 7 system files.
   
  Note: When running the upgrade on the spot, the system will restart automatically (several times) to merge the files and programs, please leave the computer alone and does not configure it until the 'upgrade on the spot"finished. The system should start Windows 7, once it is upgraded. Once the computer is running "upgrade on the spot", you can go and leave the computer and it completes automatically.

  Let us know if that helps.

• 27 - 1110ea: Windows 7 update does not update

  Hello

  I did now 2 installs fresh with the HP recovery discs and both windows update does not work. I tried different patches from microsoft that I found online in this regard and nothing works.

  I don't know if it's related, but said SP1 is installed, but when I look in the installed updates it isn't here. If I try to uninstall from a command promt it says is not installed and if I try to install it from the microsoft download it says it is installed.

  It makes me crazy. I was expecting it to work from a clean install, but it doesn't.

  Any help would be great.

  Hello

  Welcome to the HP Support forum. Thank you for posting.

  If it says SP1 is included, it means it is included and comes with the system, so you can not unintall it - it is part of the system - built in. You will not see the updates installed because it's built, do not subsequently installed.

  It is a known problem that now when you perform a clean installation of Windows 7, the installation updates will be delayed. This is due because of many things including the fact that W7 is more priority Microsoft because of new OS on the juice of the horizon: like Windows 10. Some users have reported that after the new facility it may take hours of waiting until Windows 7 poster updates are available. But don't worry - they are not that critics and you shouldn't worry so much for them.

  I can offer a workaround is to:

  -Windows 7 update agent be manually updated to the latest version > > https://support.microsoft.com/en-au/kb/949104

  -Download directly from MS "April 2015 battery maintenance update" and install it manually

  > > https://support.microsoft.com/en-us/kb/3020369

  -Download Win 7 convenience roll update and install it manually

  > > win x 64

  http://download.windowsupdate.com/d/msdownload/update/software/UPDT/2016/05/Windows6.1-kb3125574-v4-x64_2dafb1d203c8964239af3048b5dd4b1264cd93b9.MSU

  > > win x 86

  http://download.windowsupdate.com/d/msdownload/update/software/UPDT/2016/05/Windows6.1-kb3125574-v4-x86_ba1ff5537312561795cc04db0b02fbb0a74b2cbd.MSU

  This update package, which combines updates dating all the way back to February 2011, is not be made available in Windows Update. If you install a Windows 7 system from scratch, you will need to go out of your way to download and install it. If you do not, Windows Update will download and install the updated way on day one by one, the slower, more tedious.

  You have now all the updates of Windows 7 since its initial release until may 2016

  After that, you try to install the new updates.

  I hope it works for you. Let me know how it goes.

• Windows 7 update does not

  My entire hard drive crashed, lost everything.  The recovery process has not worked.  I replaced it with a new (1 to).  I have a HP Pavilion Elite HPE 410t with 8 GB or ram.  I have Windows 7 discs.

  I installed Windows again, but I meet all kinds of questions.

  (1) Windows update does not work - guard telling me the service is not running.  Checked, and this is according to the system.

  (2) .net framework does not install

  (3) another strange thing is that some web pages KB MS are not allowed by EI.  Very strange.

  I'm about to order the recovery media to my system via the website of HP, but I would like to hear if there are suggestions from the community.

  Thanks in advance.

  Hello

  Of your HP PC support site shows that you have an Intel Chipset. If you need to download and install this driver.

  Here is the driver download site for your PC with all the available drivers and software.

  Here are instructions on running the diagnostics of startup time.

  Let me know how it goes.

  Jaco

• Windows security updates do not work!

  This happened a few months previously and to Microsoft tech support sent me a batch file for restore and restart the updates. I did not now and can't remember where they would go if I googled them. Support Tech does not answer my emails, so I hope someone here can help me out. To add insult to injury, I have a real Message icon in the taskbar that don't go away. I checked for viruses and horses Trojan but so far have not found anything here. Help will be greatly appreciated!

  CF. http://social.answers.microsoft.com/Forums/en-US/vistaprograms/thread/ade33788-ef80-45e6-9036-aa02a65f2786

  You can still see the effects of your last August, Dovidel hijackware infection. If this is the case, only a 'wipe & reload' will solve your problems. See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  After the new installation, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB key that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs or IE upgrades and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Drive HARD 2000-0146, windows Security Center does not, all downloads have refused as containing viruses. PDF answer either.

  His Dell Inspiron 1464, purchased in 2010.

  * HDD error 2000-0146, how to fix it.

  * Eset Nod32 does not and has not been allowed to work properly.it has no web access protection.

  * IE does not open any website and emails, downloading is permitted as States contain viruses.

  * Currently eset nod 32 is not installed on my laptop.

  the problem is not too big and small, that I updated all drivers and scanned a month ago to remove all viruses etc.

  But I can't find a way to fix above error to avoid a reinstallation.

  * I updated my BIOS and it sees SATA.

  * PC diagnostic shows no errors of any kind.

  * has tried all the win-fix-it.

  Thank you.

  I was looking for something for you in the Forums and finally found.

  Read the answer by The ball

  "I get the error message"xxxxx.xxx"contains a virus and has been eliminated ' downloads... on all software updates from microsoft.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/i-get-error-message-xxxxxxxx-contains-a-virus-and/fbb5e0fd-63bd-4E01-9a98-6074d33a8fd6

  See you soon.

  p.s. with RKill, there are a few other names available for download of RKill attempt to deceive malware.

• Windows, download itunes says windows Installer updates does not work

  I too manage download of updates, get the errors for microsoft office 2007.  I tried to download the utility for him but can't even download that.  Says windows setup does not work.  I ran malwarebyes but still does not load them.  Can I reload windows vista without losing everything?

  Hi Jkfitz2,
   
  Welcome to the Microsoft Answers Forum community!

  first of all, I suggest you to re-register the windows installer. To do this, please follow the steps below:

  Step 1:
  
  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
   
  1. in the menu 'Start', click on ' execute:.»
  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
  3. in the menu 'Start', click 'run '.
  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  For more information, please see the link below:
  http://support.Microsoft.com/kb/555175

  Step 2:

  Also I suggest you to start the Windows Installer service.

  Steps to start the Windows Installer service:

  1. start, type Services.msc and press ENTER
  2. double-click click Windows Installer
  3. the value of the Windows Installer Manual startup type
  4. Click Start to start the service. Note the error message, if any.
  5. click on OK.
   
  If the steps above does not you can download the latest version of the windows package install autonomous from the link below.
  http://www.Microsoft.com/DownLoads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Also I suggest to restore the windows components update, try to fix it.
  Please see the link below to fix:
  http://support.Microsoft.com/kb/971058

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer                                                              
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• Vista home prem (KB967723) sp2 security update does not install and get the error code 80073712

  I tried to fire disableing walls, with work, I get all the way to installation and the i get the error code 80073712

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" "»

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• "KB2497640 cumulative security update - does not install.

  Hello

  'update cumulative security for internet explorer 8 for windows vista' KB2497640 9.2 MB will not install on my friends computer can you please help?

  Hello

  1. What is the error message or error code you found?

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can try to download the standalone update package and check if it installs:

  A security update cumulative for Internet Explorer 8 in Windows Vista (KB2497640)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5ea94705-4f76-4B0D-BBBC-afb5e75204bf&displaylang=en

  Hope this information is useful.

• Problem installing Windows Security Update. Not installing - KB2467175

  I have a problem when you install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175). Everybody out there to provide a solution for this? Am pretty tired after trying all possible solutions, I can and in vain. Problem is that this particular update is not proceed with the installation even after you try to install it manually also. Impossible to solve this problem. Ask for help from you people.

  Please note: Tested on a PC running Windows Vista 64-bit Version.

  I found a solution for this problem and fixed it. I don't know how it would work for others. May give it a try because it will not harm you in any way.

  I tried to make all possible suggestions found on the net, but none has proved that my way then went on my own way.

  First of al the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package comes with updates of Windows 5.6 MB file size which means (to my knowledge) to install two Versions of this update of 32 and 64-bit Versions on 64-bit PC running. This particular update the Versions of it needs to be installed and not a particular Version of the update. The size of the file for 32-bit would be 2.6 MB and 64-bit is 3.0 MB, once the combination comes only 5.6 MB. You can find the download on the link below and download Versions. You have 64-bit the second and 32 bits as the 3rd on the download page. I first installed the update then with the 32-bit and the 64-bit Version and finally managed. Please find the link to download the update manually from Microsoft site

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=fb01abe6-9099-4544-9aec-0ac13f19bc50&displaylang=en

  If this solves your problem then kindly updated me.

• Windows 7 update does not find updates

  Whenever I try to update my computer manually, Windows 7 does not detect updates and will sit with the green bar goes all day. He began to do this maybe 3 months ago and I don't have time to focus on the issue so far. I am interested to get SP1, but I can't because the computer will not be updated. Thank you.

  "Windows resource protection could not start the repair service."

  Follow these steps to reset the startup type of the service.

  1. Click Start, type Services.msc

  2. double-click on the Installer of Modules of Windows

  3. set its startup type to Manual

  4. click on OK.

  Try the System File Checker

  `~`

  The TrustedInstaller service has full access to the files of the Protection of the resource Windows (WRP) and registry keys, and these services must be running in order to restore missing or corrupted WRP resources. The TrustedInstaller service starts on request when you run the System File Checker.

  `~`

  03/13 / 1108:23: 48 pm

• Cannot download Windows 10 because my Windows [7] updates does not work.

  Windows Update fails to download updates. Troubleshooting mentions an error number and does not repair.

  That's why I can't go to W10

  Hello

  If you can't get Windows 10 to get 10 app windows or Windows update, you always have the option of ISO to upgrade.

  Download Windows 10 media creation tool

  Simply select this option of PC/improvement.

  After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  

  (Askvg.com)

• Windows Security Center does not illuminate

  Just installed Microsoft Security Essentials. Windows Security Center is in stop mode and running. Windows Firewall and microsoft defender both say they are on.

  Hi woodcockvet,

  Do you have an error message when you enable Windows security Center?

  Step 1: Run the fixit available in the article below and check if that makes a difference

  You can't turn on Windows Firewall in the Security Center

  http://support.Microsoft.com/kb/2271812

  Step 2: Try to activate the Windows Security Center service and repair the WMI (Windows Management Instrumentation) database repository

  You can follow the steps mentioned in the link below that relates to a similar question

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/f6e51590-47b3-489F-9921-173d106a9738

  Note: Some security software takes over Windows Security Center and uses its own Security Center.

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.