E1-771-6607 Bluetooth cannot find all devices

Similar Questions

• Bluetooth cannot find any device?

  Hello. I have Inspiron 3520 with Win 7 64 bit. My Bluetooth driver is installed but cannot find any device. That is to say that I'm unable to connect to my smartphone via bluetooth. So please help me guys. Who will appreciate.

  Hi Misbah,

  Please keep us updated.

  This error can also occur if you do not have an installed device driver or if you have a device driver obsolete for your Bluetooth device.

  To resolve this problem, you need to install the driver for your Bluetooth device. If the unit comes with a CD or a DVD containing compatible with your version of Windows device drivers, insert the disc in the drive and follow the instructions to install the driver.

  If your Bluetooth device came with a driver disk, you will need to go to the device manufacturer's Web site and download and install the latest driver for your device. To do this, visit the hardware manufacturer and browse the latest Bluetooth version for your device driver. Follow the instructions.

  Please see: error: "Pilot of Bluetooth device not found" when you try to connect a bluetooth device

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• My SE Iphone bluetooth cannot find any device. I think it will be ok when I upgrade to IOS 9.3.2 but it does not always find all devices.

  My bluetooth on Iphone is not all devices. But if I pair of the other site, it gets conned. When I want to join bluetooth in the President, I can't find it. What should I do?

  Please help me the best.

  If you're on 9.3.2 already try a reboot forced. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Others have reported the same problem after 9.3.2 and a FR it is resolved. Worth a try.

• HP Pavilion P230AX 15: Bluetooth cannot find any device

  Hello. I have a HP Pavilion 15 P230AX with Windows 7 Ultimate 64 bit running on it.

  in a year, I never use my bluetooth to connect to any device. and now, when I want to connect my phone (romaric redmi 3 pro) both of my device (laptop and smartphone) cannot recognize each other. bluetooth always says "(searching for devices...)"

  

  1. I have restart the service in services.msc and set the bluetooth for 'salvation' and 'automatically' in Device Manager

  

  2. I have reinstall my bluetooth driver, and it is updated

  

  3. I try to follow the steps on http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/No-bluetooth-device-was-detected... but, he can't help.  And in HP wireless assistant, it said

  

  It says people with reduced mobility, but I can connect to the internet. I don't know who is wrong, me or the software.  and the button "Enable all" gel.

  Help me please.

  NB: I'm sorry for my English

  Hi @GerhardSitorus,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need help with Bluetooth pairing for your device from romaric. It'll be a pleasure to help you with this.

  You did a great job on diagnose the problem on your side. Kudos to you on this point. It is always a privilege to work with tech-savvy and technically competent customers like you. We greatly appreciate your relationship with HP. I am amazed at your technical skills and expertise. Brilliant work!

  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, we must determine whether there is conflict. For clarity, I would need more information.

  • Have you tried your Pro 3 romaric Note matching with another device to rule out the possibility of Bluetooth connectivity issues with it?
  • Have you tried to associate any other device with your computer to check whether the computer Bluetooth works properly?

  I ask you to first isolate. For now please follow the steps in this link: http://support.hp.com/us-en/document/c01060335

  Link 2: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01590950

  If it still not solved, please update the bios, the chipset and drivers Bluetooth http://hp.c/om/drivers if it has not been done.

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• RT: Remote desktop says "cannot find a device suitable for C drive.

  Hello

  There is a french position on exactly the same topic, but I can't apply the solution given here.

  My problem is this: I have a remote, ready to work as a target RT Office. It has been verified for compatibility, the hard drive has been formatted to FAT32, it was found by my host and received a static ip address. I installed the software, I need (LabView RT 9.0) using MAX. Now, when I try to boot with the option 'start using software installed on your hard drive', all I get is the message

  "Cannot find a device suitable for C drive.

  I have reset the BIOS, tried to format the drive hard in the other format, uninstalled and reinstalled the software, tried to start the pc target without the USB, but nothing seems to work.

  You have ideas on what goes wrong?

  Thank you

  Samuel

  Have you tried changing the settings of the BIOS for the hard disk controller?

  There could be different modes available.

  Refer to the hard drive of this document: http://zone.ni.com/devzone/cda/tut/p/id/8239?OpenDocument

• wifi card cannot find all networks

  It does not work! I've tried disableing the * bleep * thing, but then my wireless card cannot find all of the networks in range. After that, I uninstalled the AC Tool. the same thing. I'm really running out of patience with this boatware! Why couldn't they just leave windows to manage networks and Wi - Fi?

  any help appreciated!

  Problem solved (thank God):

  1. update the driver on the LOCAL network card (mine is INTEL 5100 AGN)

  2. restart

  3. set the WLAN to "Uprooting" autoconfiguration service (in Services)

  4 restart the gain!

• iPhone 6 cannot find the device bluetooth audio

  My iPhone 6 (IOS version 9.3.5) Impossible to find a new bluetooth device and keep the search bluetooth unanswered.  In addition, reception (when listening i-tune) is bad and intermittent.  Appreciate advice how to solve this problem.  Thank you.

  Hello ChengMY,

  Thank you for using communities of Apple Support.

  If I understand your message that your iPhone 6 (which is updated to iOS 9.3.5) cannot find a new Bluetooth device and don't stop looking for him. What type of device Bluetooth you are willing to pair with your iPhone? The reason why I ask, is that there are only some that the iPhone supports Bluetooth profiles. Here is a list of the supported Bluetooth profiles:

  iOS: supported Bluetooth profiles

  If the device you are using uses one of the supported Bluetooth profiles, the steps described in the following article can help solve the problem for you:

  Get help connection an accessory with your iPad, iPhone or iPod touch Bluetooth

  Best regards

• 6 iPhone bluetooth cannot find devices

  Hello

  I have an iphone 6, and when I turn the bluetooth it finds not all devices and is locked on the search for devices.

  No idea how to solve this problem?

  What types of devices are you looking for? Are you sure that these devices are in discovery/torque mode? Were you ever able to pair a Bluetooth device with the phone? This support document contains some troubleshooting steps for pairing Bluetooth devices. Set install and use third-party Bluetooth - Apple Support Accessories

• Cannot find NI0DAQmx devices on the network. Test Panel button grey

  Hello

  I have a Dell than T710 Win Server 2008 R2 64-bit. NidaqMX 9.3 is installed. The dialog box search for network OR-DAQmx devices cannot find my NI ENET-9163 carrier with a card NI 9215. This card has a static IP address in the same subnet as the LAN of the PC port. I ping the device.

  However in the search network OR-DAQmx devices dialogue box I can add the Board manually by specifying the IP address. This seems to half work as long as it saves the map MAX, but the test panels button is grayed.

  I installed Nidaq MX 9.3 on my win 7 64 bit laptop and I can find the card properly and test it. Clearly there is something wrong with the config on the Dell software, but I have no idea what. Any help is appreciated. I stumbled on, IP addresses etc. I also disabled the 3 other network ports on the Dell server in case that is the question.

  Thank you

  Andrew

  Hello Andrew,.

  I could do some tests on our Windows 2008 R2 server. I was able to replicate this but not as easily as you did. We have 2 network adapters on that server. We have solved this problem is to do the following:

  1. disable IPv6 IP addressing all the ports of the network.

  2. change the metric of the Interface on the network adapter. We have high, so a value of 50. You can get this metric by going into the properties of your network card > your IPv4 properties > advanced on the general tab > UN select Automatic metric and replace with static. (the entries are 1-60). Do this for all of your network adapters. Given that we have this setting that we have never seen the question re occur.

  We also checked that it doesn't happen at all on the new cDAQ-9181 chassis. This chassis is intended to replace the ENET-9163. If it is possible for your upgrade I would recommend this option. You should be able to work with your local sales channel to get one to test with. We have 20 + 9181 in this system and have never seen the issue of not being able to Max commonality to the chassis.

  Let me know your results to adjust the parameters I mentioned above.

  Thank you!

  Corby

  CDAQ PES of R & D network

• Equium - cannot find all networks to connect

  Not very computer savvy so will try to explain the problem as best I can.

  I can connect to my internet connection via ethernet cable, but cannot connect wireless (although I have before).

  The wireless function is enabled and the orange light comes on. When I open connectivity doctor and go on the radar screen, my internet connection appears (along with a few others)
  When I hover over the connection icon at the bottom of the screen, it says that "wireless connections are available", but when I click it it establishes that "windows cannot find any network" then understand that there must be an easy way to solve this problem, it can not find all networks to log, mine or one of my neighbors!

  Hi paulymart,

  Which model of laptop, you have exactly and that you've updated the driver WLAN?

• LaserJet Pro M127fn Installer cannot find the device on the network

  Hello

  I just bought the product, but during the installation - setup is unable to find the device on the network. Device is properly registered to the address 192.168.0.14 (with static IP address), I can see the dashboard configiration at the same address via browser and all works well with the network itself.

  Try to ping the IP - it's ok. Tried to install without active firewall - also fails.

  Double checked the installation process - with automatic search and provide the IP address of the printer - both failed.

  Also, I rebooted the router and the switch and the computer. Is not new. I also tried downloading the last executable configuration on the site - and even once, it fails with 'device not found on the network.

  Then what do I do to fix this?

  Thank you

  Finally found a solution. It is strange as it may seem, but after all, it's a solution.

  -Rinse your DNS and your ARP cache (see the Google if you don't know what that means)

  -Reboot the router (or, where appropriate - switches)

  -Change the IP address of the device on your network. Try with round numbers like (192.168.0.20)

  -Restart your router (and if applicable - switches)

  -Restart your computer (s)

  -Don't run the Setup again and the hoprefully you will have no errors and everything works perfectly for you

  If your problem, similar to mine, persists, repeat the above process again and again... and again...

  Good luck

• Cannot find a device supported to write image vmware esxi 4.1.0

  I have a Dell Poweredge R410 (service tag XXJ1FQ1) with a Raid 10 for PERC S300 controllers with 4X250GB drives.

  I downloaded the iso 4.1.0 ESXI and can boot from the DVD, but after agreeing to the terms. The installation program will fail and I get this error:

  «Could not find a device supported to write image VMware ESXI 4.1.0 to.»

  I checked the compatibility Web site: http://partnerweb.vmware.com/comp_guide2/detail.php?deviceCategory=server & productid = 4932 deviceCategory = server & partner = 23 & releases = 24 & keyword = poweredge % 20r410 & systemTypes = 2 & page = 4 & display_interval = 10 & sortColumn = Partner & sortOrder = CSA

  And my system should be OK.

  Has anyone experience this problem? And how to do this?

  Easy.  You cannot use the card s300.

  S300 work only in windows environments.  I also learned that the way lasts.  (Thanks Dell!)

  Pick up a Perc 6 / i and you will be ready to go.

• L G GT400 Mobile device cannot find a device driver for this phone to connect to a P C

  Trying to download pictures from the mobile, but windows cannot find a driver

  Hello

  See the following article to get the drivers for GT400 mobile.

  Product support for GT400
  http://www.LG.com/NZ/support/product/support-product-profile-mobile-Redux.jsp?customerModelCode=GT400&initialTab=drivers&TargetPage=support-product-profile-mobile-Redux

• Cannot find all-in-one OfficeJet 6313 on bluetooth

  I've just set up an OfficeJet 6313 which has already been used by the USB, but I want to use Bluetooth. For some reason, however, when I search for devices I can't find.

  Anyone know if there is a way to turn on the bluetooth? I tried the printer menus, nothing helps.

  Well, I was trying to be helpful.  You'd be amazed at the number of people who do not follow the manual for their printer.

  Have you noticed this:? "Before you print, you must connect a HP bt450, printer and PC adapter with Bluetooth® wireless technology to the HP all-in-one device".

  Have you also noticed that this only provides an impression, not of analysis or fax?

• Re: Toshiba bluetooth dongle BT cannot find remote device

  Hello

  I just bought a Toshiba bluetooth dongle BT 1.2/2.0 to transfer pictures from the phone to the laptop (Windows XP with Service Pack 2).
  The main problem seems to be to find a remote device.

  Wizard is unable to find a remote device.
  Any ideas?

  Make sure that your remote device in discoverable game. What mobile phone you are using?