Cannot find all-in-one OfficeJet 6313 on bluetooth

Similar Questions

• Cannot scan all-in-one Officejet 5610

  I have my original HP Officejet 5600 Series Photosmart 3100 Series disc for Macintosh, CD version 7.9.0, but can't seem to get the scanning and software ocs backup on my computer. I've recently removed from my hard drive and now can't scan or use my ocs. Help! Is there an update to SnowLeopard I should use? Thank you.

  Never mind. I just found the answer elsewhere on your site:

  "Scanning is now supported with the Apple Preview and Image Capture Applications in Snow Leopard for these devices."

• Cannot sweep the all-in-one Officejet 4630

  Hi all - help needed please.

  Recently bought a printer all-in-one Officejet 4630 and had nothing but trouble, set-up and use it. After several attempts to put in place, everything is roughly in order, though I can't yet scan of the control on the machine Panel (I can scan only through "system preferences" under the apple icon).  Whenever I try to scan the engine control panel (and not through system preferences), using either the wireless network (Airscan or whatever it's called) or the USB cable, I have the following message on my laptop screen:

  Task is not available

  The task of "Photo (JPEG)" found on your device is not available on your system. Please select another task.

  The same thing happens if I try to scan to PDF. I use an old (c.2007 MacBook Pro) that runs the OSX10.9.5 Mavericks. Internet connectivity is not a problem because we have the right cable broadband. All I want to do is scan directly from the printer to my computer, preferably using a wireless connection. Help, please.

  Thank you

  Hi @nckbtlr and Happy Halloween!

  I'm sorry to hear about the problems you are having with your Officejet 4630. I understand that you are unable to scan from the front of the printer. I'd be happy to help you with this.

  In the spirit of Halloween, first I have to ask: what did the Mummy to tell the Agent from HP Support?    Let's wrap this case up!

  I suggest to uninstall and reinstall the software. Please follow the instructions below to complete a more comprehensive uninstall than basic uninstall. I know that these steps look long and convoluted, but I made it easy to follow and have confidence that these steps will solve the problem.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Can't find model number, installation instructions for the unit duplex for printer all-in-one Officejet 6110

  MY friend gave me a duplex unit to another printer 6100 series he had. We thought that it would be compatible. The HP site says that my all-in-one OfficeJet 6110 can use a duplexer, but that's all he says: no model number and no installation instruction.  Does anyone have any info or suggestions? I can't know just by looking at my printer.  (The duplexer No. FPU is C9101A).

  Thank you!

  To install the duplexer, you must remove the rear blankpanel of your OJ 6110.  The rear panel will be approximately 9 "wide and 4" high with two s tab that can be moved together in the output panel.  Snap the duplexer in place once it is removed.  Make sure that it is oriented correctly, the label must be on the bottom.  Use large buttons on the ends of the duplex unit to release the duplexer if it is to be removed or moved.

  With the duplex unit installed, you will need to configure it so that it is recognized by the driver.  See the post here for more information on activation of the duplexer.

• All-in-one Officejet 5610: lost all ability to scan after operating system upgrade

  Hello

  First post.

  Tried to implement everything. Need for new perspective or someone just told me that the printer/scanner is not taken in charge any longer.

  Recently updated to OS 10.8.5 as well as extra memory.

  Have scanner only for the work of the company.

  The scanner just stopped working after update of HP software. I don't remember version. Nevertheless, today I removed all HD and started around, but nothing works.

  Start over means, I downloaded a new driver and the patch.

  Using a HP scanning Application. Now that the application does not appear even on the computer.

  Let's start with some basic questions and then go from there:

  Neither HP or HP scanning Application utility are now on the hard disk after you follow the instructions from HP to delete.

  What I need the original disks and to reinstall the software from it or can those be online?

  Thank you.

  Mike

  Follow-up.

  Tried this approach (see link), but the all-in-one Officejet 5610 is not listed. I suspect the printer/scanner in is no longer supported?

  THX!

  http://www.MethodShop.com/2013/12/HP-utility-install.shtml

  Second follow-up:

  I understand how to use of Apple's Image Capture application as a workaround. Not as friendly as HP Scan.

  Unless someone can tell me the HP and HP Scan utility always work in OS 10.8.5 for the 5100, I guess that will be sufficient.

  Thank you.

  Hello

  For Mountain Lion, your printer software is provided via Apple Software Update.

  Follow the steps below under "Use Apple Image Capture" to scan with the Officejet 5610 on your operating system:

  http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04788799/

  If you are having problems scanning, be sure to follow these documents to install the latest drivers from Apple Software Update:

  http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04510394/

• wifi card cannot find all networks

  It does not work! I've tried disableing the * bleep * thing, but then my wireless card cannot find all of the networks in range. After that, I uninstalled the AC Tool. the same thing. I'm really running out of patience with this boatware! Why couldn't they just leave windows to manage networks and Wi - Fi?

  any help appreciated!

  Problem solved (thank God):

  1. update the driver on the LOCAL network card (mine is INTEL 5100 AGN)

  2. restart

  3. set the WLAN to "Uprooting" autoconfiguration service (in Services)

  4 restart the gain!

• all-in-one Officejet 6310: officejet 610 all-in-one in offline and don't watch does not reinstall in windows 8

  I have a Wondows 8.1 and a printer portable all-in-one officejet 6310.  I have my printer installed and works fine on my laptop, but out of the blue one day that the printer will be offline and restarting the computer and printer does not correct.  I've uninstalled and reinstalled the computer many times - this helps for about a week before it disconnects again.

  Now when I uninstall my laptop says there is no printer in range and lists no printer for me to install.  When I tried to manually in my printer - doesn't say that there is no such printer available.  Any suggestions?  Apparently this ONLY happens to me on my computer and not someone else in the home on their laptops - we have a total of 4 laptops in the House all on the same router and using the same printer.  Oh how I feel like a fool with windows 8.  Someone at - it helps or good suggestions for me? PLEASE? !!

  Don't worry, it happens to the best of us. I recently became very angry because my iPad was not charging, the end came unplugged from the wall charger! Laughing out loud

  This problem can be caused by outdated closed ware, contradictory I.P within the router, etc. I have worked on a Thread revolving around Windows 8.1 for awhile, check it out for some possible future troubleshooting operations.

  There are steps to add the printer a way, assign a static IP, check that some updates are installed by Microsoft, etc.

  Missing/partial prints & printer offline on Windows 8/8.1<>

• All-in-one Officejet J6480: printer Officejet J6480 on Windows 10

  I've owned a printer all-in-one Officejet J6480 for a few years.  I bought a new Lenovo computer several months that came with a free to Windows Update when 10 is which would be published.  I managed to load the J6480 software and everything worked very well, including the scanner.  When Windows 10 came out I upgraded to it and rebooted the printer software and everything worked fine.

  Then about two weeks ago, all the J6480 would do is printed.  When I tried to open the HP Solution Center to scan a document all I had was a 'ping' and the Center does not open.   So I tried to remove all the HP software and re - load.  It would be the load but not completely.  I kept getting the message that "the application you are trying to use has been blocked to open because it could damage your PC or the loss of data. This is because some applications that worked with a previous version of Windows may not work the same way with Windows 10 ".  I do not understand why it worked fine for a few months with 10 windows and now it's incompatible, unless there was an automatic upgrade (Windows 10 or HP) that is now causing the conflict.

  I've uninstalled and reinstalled the software several times but to no avail.  Can anyone suggest a solution?

  Hello

  Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
      
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• All-in-one Officejet Pro 6830: INSTALLATION of the OFFICEJET PRINTER

  I had already set up my printer when I had last year. A few weeks ago, my printer was unplugged, when I connected again, wanting to be set up again. He won't go beyond the screen 'Configuration of the cartridges' because he wants than that it came with that I don't have. Why is there need to put in place again and what can I do about it?

  Hey @britb,

  Welcome to the Forums of HP Support!

  I understand that printer e-all-in-one Officejet 6830 asking cartridges SETUP. For this problem, contact HP support. You can do this by clicking on this link and fill in the form below.

  Please let me know if you are able to resolve your problem after contacting HP Support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• How to set the time and date on printer n911a e-all-in-one officejet pro 8600.

  How do you set the time and date on printer n911a e-all-in-one officejet pro 8600. This info is not in the user's guide or the getting started guide.    Thanks in advance. Jim

  Jim go to settings on the 8600, click Preferences.

  There is an option DATE and HOUR.

• The upgrade of all-in-one Officejet 6210

  I have a 6210 that I love, but it is not compatible with Windows 8 (for example when I want to scan doesn't give me the option to save as a jpg file.

  I like the printer and want to know what model number would be the direct upgrade of the 6210?

  Sorry, you are right. This printer is not compatible with Windows 8. A great upgrade to the next type of printer which will be compatible would be an all-in-one Officejet 6600 or 6700 Officejet printer.

• all-in-one Officejet 5610: cannot scan

  I am trying to scan on my officejet 5610 all-in-one and I get an error insall for windows 8 or 8.1.  Help please.

  Hello

  Please download and run the following tool and post back all the error messages:

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-6/HPPSdr.exe

  Kind regards.

• All-in-one OfficeJet Pro 6978: OfficeJet Pro 6978 creation for Vista 64-bit Home - where are the pilots?

  Hi - Install CD says operating system not supported. Cannot find drivers - that the reference to "Readiris Pro for HP 14". Support video says to look for hppiw.exe which I can't find on a HP site.

  Is the problem that the 6978 OfficeJet Pro cannot run with my operating system Vista Home 64-bit? I bought yesterday, so I can return it.

  This should be simpler, so THANK YOU for the help and advice.

  Hello

  The printer is incomaptible with Vista 64-bit.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  Kind regards

  Shlomi

• Printer all-in-one Officejet 5510v

  My HP Officejet 5510v all-in-one printer fails to print from my computer, with an error message indicating that there is a jam. I tried to delete but cannot find any paper jam or carriage jam. I can scan, copy without problem. I can not even go to the "setup" button and type in 1 4 and print a test without problem page. But whenever I try to print something from my computer, I always get the error message. What can I try to fix this problem? Thank you, Tim

  Because the hardware seems to work fine, not related a jam, the software may need to be uninstalled and reinstalled. I would like to just give a try.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=32745&tmp_task=useCategory&cc=us&DLC=en&lang=en&LC=en&product=311261

• All-in-one OfficeJet J4550: only a fraction of the feed photo paper

  I am trying to print photos of 4 * 6 using HP photo tip on an OfficeJet J4550 paper.  Sometimes it works but most of the time after the initial report pull in the paper and the printer starts to print, paper only continues to fuel in about half of the way through the printing process.  So I find myself with half right of the image about half left of the document.  Sometimes I get two-thirds of the image and sometimes only one third - it varies.  The part of the picture I get is really good!  Any ideas?  Thank you.

  Hey @Steve2034, welcome to the Forums of HP! I'd love to help you to print photo 4 x 6 of your Officejet J4550. I understand that sometimes you can print a photo 4 x 6 full, but most of the time that the book fails to pass correctly so you end up with a partial impression. This happens when you print on 8 x 10 or any other photo paper? What happened when you print documents? Could you please try to make a copy of the photo of a photo 4 x 6 in order to test the equipment and eliminate the software/driver?

  Although you may be able to print documents, and assuming that it's a hardware problem, please complete the solutions suggested, presented in the following document: HP Officejet J4500/J4600 all-in-One Printer Series - Error Message "on paper" and the printer is not Pick Up or paper feed.

  I don't think you see an message to document your description, but the options presented in the document above could solve the problem you are experiencing.

  If the question is indeed solved, please click Accept as Solution button below. If however, the problem persists, let me know and post back with the answers to the above questions.

  Thanks, I look forward to hearing back on your part.