E10 - SF integration Documentation

Similar Questions

• Cast/EMR integration documentation?

  According to the course of 3 days I became the 'expert' DMS in my organization and Tuesday have to go and set up the cast for someone who has 27 4400 DMP (without remote controls - AWESOME), six 2200 DME and 27 1100 DME.  The thing that that concerns me most is the customer willing to listen to a variety of channels to its DirecTV receivers through his 2200 s in a variety of channels set up through cast.  Unless there is a better way to do it.  Is particularly concerned about the fact that it seems the 2200 s have only 2 entries per encoder and those are composite or s-video or SDI (doc Ref here http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps7063/data_sheet_c78-504500.html table 2) Cisco allegedly put the nomenclature together so surely there was a plan.  Given that I've never done an implementation of the large-scale distribution - I have no idea what the plan is / was.

  I understand how to establish a relationship between the DMM and DME (although our DMM is a non - UCS VM installed for training and there is apparently a few problem with MED and the DMM in this scenario - whatever it is, I only know how * theoretically * implemented).

  So my most important question about the melting is - given this equipment list - can someone deboning a SHOT of him?  Important issues are also - suppose that direcTV output is composite or I can modulate - and I use the EZ-stream interface to start encoding the signal in a digital stream - what will happen?  Is the stream should be sent to their Windows 2008r2 server before be mapped as a distribution channel?  I may have been taught - but remember - the EZ-Stream generated can be mapped directly to a distribution channel?  Or when the DME/DMM relationship is created - streams are mapped to group mcast addresses as they seek to push these channels in real time?  So far I found only-sheets techniques, brochures and information products specific configuraiton - no documentation integration.

  The last two concerns I have about the cast are - without a single remote control - I'll need a xml/web page script (installed on an ip phone or a URL) to control the cast function, once the configuration has been pushed to the DMP.  My memory is that Cisco is not a standard: one in the class, we used was absolutely terrible. Can someone point me to a resource like that?

  My last concern is its completely ridiculous regardless of the true answer - the client I install this for is adamant that the DMP is ONLY for digital signage and the 1100 s are for the delivery of its installation of Cast on each site.  Unless I've misunderstood completely the function of the coders or the DMP, this MUST be incorrect.  I am 99.999% certain all 1100 s are capable of encoding is to NOT decode or management of channels or what anyone and I know I pushed the cast configuration, we have in our lab to the DPM - what is my first rodeo - I need to be ABSOLUTELY SURE that there is not some sort of intent here between the 27 encoders and Cast - anyone know?

  I have other questions - as is at - it a recovery procedure of pw admin and root for DMM?  But I need to get my casting situation recovered.  Thanks for any input.

  DME 2200 will make two channels, the DME 1100 will be 1 channel. In addition, the DPM will not play a live stream WMV - only on videos in one request. WMV format.

  The main purpose of DME is to stream to see the and part NOT signs/Cast.

  You will need other encoders for this. You can watch the most recent acquisition of Cisco (Inlet). They have some very nice encoders. You can also use the scientific atlanta train for this purpose.

  You're right about the encoders - they only encode the stream. They are basically taking a stream video and converted into a format that can be sent to your Ethernet network. It then takes a decoder to convert video for display.

  Regarding the recovery of password, use the PWADMIN account and you can change the password.

  I go back to the Cisco team, and check out what they understand the conditions to be. Cast is perhaps not really the solution they were looking at. Maybe they wanted to video streams on PC and LCD screen just for signalling.

• StartScen.bat does not

  Hello

  (11.1.1.5.0)

  I'm trying to run a startscen.bat ODI interface, but its does not work.

  No error is reported, no work appears in the operator and the calling batch file closes abruptly.

  This is my calling batch file script:

  SET BIN=D:\Oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\bin

  D:

  CD BIN %

  SCENARIONAME 001 Development 5 %bin%\startscen.bat > D:\trace_SCENARIO_NAME.log

  Here is the result in the journal:

  OracleDI: From scenario COPYCELLDETAILS 001 context development...

  And here is the script of the Startscen.bat itself:

  off @echo
  setlocal
  "for %%d in ("/ help"" / help ""-HELP ""-help "" "" ") If %%d ==" % 1 "goto HELPTEXT
  GoTo STARTCOMMAND

  : HELPTEXT
  echo.
  (c) Copyright Oracle of the echo.  All rights reserved.
  echo.
  echo PRODUCT
  echo Oracle Data Integrator
  echo.
  echo FILENAME
  echo startscen.bat
  echo.
  echo DESCRIPTION
  echo start a scenario. See the Oracle Data Integrator documentation for details
  syntax of the echo.
  echo.
  echo SYNTAX
  echo startscen ^ < name ^ > ^ < version ^ > ^ < context_code ^ > [^ < log_level ^ >] ["-SESSION_NAME = < session_name >"] ["-mots-cles = < keywords >"] ["-AGENT_URL = < agent_url >"] ["-NAME = < agent_name >"] ["" < variable > = < value > ""] *.
  echo.
  prerequisites of echo
  The REPOSITORY section of odiparams.bat CONNECTION INFORMATION should be the echo
  echo completed before running this script.
  echo.
  GoTo FINCOMMANDE

  : STARTCOMMAND
  If "% ODI_HOME" == "" set ODI_HOME =...
  Call "% ODI_HOME%\bin\odiparams.bat".

  echo OracleDI: from scenario %1 %2 %3 context...

  % ODI_JAVA_START0% - classpath '% ODI_CLASSPATH %' oracle.odi.StartScen % *.

  : FINCOMMANDE

  Seems to fall down around the second last line, but I don't know what to do about this.

  I would appreciate a little nudge in the right direction

  See you soon

  Hi Phanikanth

  It turns out my problem was simpler than the environment variables.  The context seems to be case sensitive. He accepted the context code 'DEVELOPMENT', while I had entered in the name of the context of 'development '.

  Thank you

• Unable to run startscen.bat

  Hi all

  I can't run the startscen.bat file. I gave all the information in the repository in the odiparms.bat file. I could have started my odi localagent successfully from the command prompt and tested using the http://localhost:20910 / oraclediagent

  Only issue with startscen.bat. Please help me solve this problem.

  I use after a command.

  D:\Oracle\Middleware\Oracle_ODI1\oracledi\agent\bin > startscen.bat - SCEN_NAME = PKG_02_GL_ACTUAL_IMPORT-SCEN_VERSION = 001 - CONTEXT = Global

  His next error message gift.

  PRODUCT

  Oracle Data Integrator

  FILE NAME

  StartScen. (bat | HS)

  DESCRIPTION

  Start a scenario. See the Oracle Data Integrator documentation for detailed syntax.

  SYNTAX

  StartScen. (bat | sh) < scenario_name > < version > < context_code > [< log_level >] [-SESSION_NAME = < session_name >] [-mots-cles = < keywords >] [-AGENT_URL = < agent_url >] [-NAME = < agent_name >] [-ASYNC =(false|true)] [< variable > = < value >] *-ASYNC = false is default; -ASYNC = true is valid only if - AGENT_URL is specified

  PREREQUISITES

  The odiparams REPOSITORY CONNECTION INFORMATION section. (bat | sh) is expected to be completed before running this script.

  Thanks in advance,

  Vikram.

  Hi all

  I tried following the syntax and its market now

  Global PKG_02_GL_ACTUAL_IMPORT 001 D:\Oracle\Middleware\Oracle_ODI1\oracledi\agent\bin>StartScen.bat

  I don't have any parameter in the syntax.

  Thank you

  Vikram

• Integration of WebTrends in E10?

  I'm working through the material of transition E10 and have not yet encountered anything describing Webtrends integration with the E10. I realize presentation materials is higher than this issue, but I need help for where do this question.

  Is this possible?

  If possible there changes?

  Thank you

  Shane LaBounty

  Shane - you should be able to perform basic weblink E10 integration. I hope that the attached content finds you well - we have two levels of integration, you can continue with Webtrends. http://topliners.Eloqua.com/docs/doc-1831

• where is the documentation for integration and using windows media player plugin

  I can't find any information that is not 3 years or more on incorporating the plugin in a web page and access to the different elements like currentPosition.

  http://msdn.Microsoft.com/en-us/library/dd564583%28VS.85%29.aspx

• How to disassemble the Qosmio E10 to replace the cooling fan - need manual

  Does anyone have instructions on how to disassemble the E10 to replace the cooling fan. a G25 irisvista.com all the other models, but the design is not the same.

  Now stuck at removal of keyboard connector.
  No idea what fan model numbers so I can order before the band down.

  Hello

  Unfortunately, it seems that there is no information on fan replacing on the laptop of the G10. These documentations are not for public use, but only for the Toshiba authorized service providers :(

  Apart from this fact it s not advisable to disassemble this laptop if you have no experience! During the disassembly process, you could damage the motherboard or something else

  So I think that he of better go to a technician because he has more experience.
  In addition, the taken cooling module supported and compatible can be ordered from the Asp in your country

  have a nice we

• SHOWBIZ DVD 2 analog video capture on my E10

  ShowBiz DVD 2 analog video capture on my E10.

  Stu

  Eric, I really don t understand you. First Movie Maker is part of the Microsoft software and you get it with Windows XP. What producer can do is to test it with own product. I'm sure you know that Movie Maker is developed for editing movies and not for recording of TV programs. WinDVD creator is also very good for editing movies.

  Second, you cannot say that you cannot save your favorite TV channel. This function is also integrated into WMC. If you don't like it, or you are not satisfied, you must look for the best solution.

  The same thing has been with me. I was not satisfied with the program to burn and I bought a new one with more options.

  Good bye

• How do reset us the Web integrated (built-in web server) server on our Pro Wireless 8500 A909g printers?

  We try to remotely administer printers HP OfficeJet Pro 8500 A909g Wireless

  M/N: CB023A

  They print and scan very well, and we can access the home page of each printer EWS.

  We have been asked to make a few changes and cannot go beyond the EWS username and password authentication request.

  In my view, it has been defined by a previous administrator, but him documented names of user and password we have on file do not work.

  How do reset us the EWS password?
  
  I have the default value is EMPTY, but if not, that would be the default password after reset?

  SOLVED!
  
  Then I got a job to another printer HP OfficeJet 8 X 00-
  
  All you have to do is RESTORE network defaults on the front control panel - this will reset the default value:

  (1) requirement for access password turned OFF

  (2) default user name is ADMIN

  (3) password is EMPTY

  then, on command before Panel set your IP network information, and you will then be able to access the built-in Web server and see all / manage all settings, including resetting the password to the web server integrated EWS.

  WITH THE SUPPORT OF HP NO.

• integration of lync 2013 with cisco vcs - c

  Hello

  I found a lot of documentation on integrating to Lync 2010 with VCS - C, but can't find much on the integration of Lync 2013.  Could someone shine some light on this for me?
  Thank you!

  Hi, David,.

  It would be preferable that you contacted Cisco re: integration

  https://supportforums.Cisco.com/thread/2181356

  Cisco PDF

  Or try to repost your question to the TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/ocsinterop/thread/319f9e94-f7ec-4c6e-994C-f5412e345e2e

• Print the documentation for the structure of the event?

  Hi all

  Work with the documentation "printing" in 2012 has Labview and noticed that there is not an obvious way to create documentation for each separate event in a structure of the event.  Since it is possible to show each individual event is a separate diagram in html file, it seems that it would be useful to be able to create a description of an event.  Please let me know if there is a way to do this.  Thank you.

  GSinMN

  Try to use labels of the integrated structure.  You will have a single comment for each case of the event.  Start your comments with a hash-tag "#" and the bookmark manager to become your best friend for the printing of your help file.  (Of course, you have to 2013 for Bookmarks work)

• No sound work of the integrated sound card since the withdrawal of another sound card

  When I bought my pc from Dell, I installed a map 5.1 sound. However I now need to use the pc for a wireless card slot, so removed the sound card and hoped to return to the integrated sound card. Although he seems to think that all devices are working correctly, when I try to listen, by using the sockets on the back or forward, there is no sound. The audio realtek manages it say that there is no device plugged into the system.

  Hello

  Check with the manufacturer of the sound card documentation to see what this cable.
  (What is the brand and the exact card model - if you need help to find
  the instructions that they should be available on the site and Google?)

  Check with Dell Support, their documentation online, and their forums for
  known issues as this sound more like a hardware issue that some pilots
  (Links above).

  ================================================

  Maybe an upgrade in Place or the repair facility might help. Do not forget to
  make a good backup or three.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Net M4110x - Net management and iSCSI. Clarification of the configuration steps. The documentation is at best ambiguous.

  Hi guys,.

  I'm having a lot of trouble to translate what I know PS6000 table to the new M4100x.  Here's what I'm building:

  

  I want my iSCSI traffic that is completely isolated from all other traffic, and I want to use the CMC network to run the Board.  It must be a simple configuration, but Dell documentation for which is worse than useless.  It confuses and everyone who's read it confuses.  Why is this?

  It seems that I should be able to assign the IP addresses of management using the MCC according to DELL:

  Step 1.  Initialize the storage

  * Once in the CMC right-click on storage open storage gui initialization.

  * Member name: MY_SAN01
  * Member, IP: 192.168.101.10
  * Member gateway: 192.168.101.254
  Group name: MY_SAN
  Group IP address: 192.168.101.11
  Group of Memebersip password: groupadmin
  * Password Admin group: groupadmin

  It sounds simple enough, and when I apply this I guess I will be disconnected my M4110x simply because it currently resides on a separate network (net 2 in the image above).  Now how to set up the IP address of my CMC (net0 in the picture above) network management?

  Step 2.  Set ip management port

  According to the documentation of Dell, I have:

  To set the management port:

  * Open a telnet (ssh) session on a computer or console that has access to the PS-M4110 range. The array must be configured beforehand.
   
  * Connect the PS-M4110 modules using the following racadm command: racadm Server 15 connect
   
  * Connect to the PS-M4110 array as grpadmin

  Once I am in:

  Activate the management controller ports using the following commands in the CLI:
  0 > member select MY_SAN01
  1. (array1) > eth select 1
  2. (array1 eth_1) > 10.10.10.17 ipaddress netmask 255.255.255.0
  3. (array1 eth_1) > upward
  4. (array1 eth_1) > exit
  5. (array1) > grpparams
  6. (array1 (grpparams)) > network management-ipaddress 10.10.10.17

  (array1 (grpparams)) > exit

  My interpretation is correct?  Now my questions:

  1. in step 2. SubStep 1 - How can I know what ethernet interface to use?  Step 1 automatically assume eth0?

  2. am I correct in using the same IP address for both step 2 - substep 2 and substep 6?  Or do I have to assign a different IP address for these?  10.10.10.18 maybe.

  3. step 2 - substep 6, it doesn't seem to be that a network mask is that correct?

  4. comparison of the ps6000e - I set up an IP address for each controller (so 2) and then assigned an IP address for the group.  It's 3 IP addresses.  For this M4110, it seems that I have only one controller.  Is this correct?  The specifications make a point that there are 2 controllers.  What happened to the IP address of the controller of the 2nd?

  CLOSE-UPS

  I intend on building a VMware cluster using the algorithm of multiple paths of DELL and I built it to the DSC, but a technician Dell put in place the table initially and have not set up a dedicated management port.  Required configuration routing traffic on the net iSCSI management.  It is not recommended, and I don't want to set up this way.

  Currently, he is a blocking problemand I need to go beyond this ASAP.  I work with a large system integrator in Texas and plan on the order that these systems built this way on their part.  This means that I must be able to explain to them how to proceed.  This issue is standing in the way of progress, and I really hope I can get a satisfactory response from this forum.  Thanks for any helpful answers.

  I think I have the answers to my own questions:

  1. YES.  Step 1 automatically assume eth0.  There are TWO Ethernet interfaces and eth1 is disabled by default, and unless you use step 2 to set the management port this second Ethernet interface is never used.

  2. No. I can't use the same IP address for both lines.  In lower level 6 I need to use a different IP address on the same network 10.10.10.18 would work fine.

  3. YES.  It is correct.  Lower level 6 assumes the network mask that I have included in the point 2.

  4. it's tricky.  There is NO WAY to configure Active/active on these tables.  There are 2 controllers, but one "still asleep," unless the other fails.  Actually, the IP address is assigned to an Abstraction Layer, it maintains.  When fails another controller "awakens" and just starting to accept traffic and it doesn't care what its IP address.

  Another point.  Now that my table is initialized and my interfaces are configured, I need to know what IP address to point my ESXi hosts for their storage.  Use the IP address of the group assigned in step 1.  It is 192.168.101.11 (there is typo in the original post).

• Foglight 4 integration Issos

  Hi experts:

  I know that foglight 4 was support. In my case, there is a large customer used Foglight 4 for a long time. So can not install 5 Foglight immediately.

  But unfortunately, the customer will have integration of foglight 4 to another system.

  We need to the docs on API or Foglight 4 docs.

  DB information managed (oacle DB2 SQL Server) and managed Middleware (weblogic, websphere MQ) is necessary.

  Such as:

  DB:

  used tablespace, Redo log space, CMS and so on

  Middleware:

  Wating JVM, JMS, JDBC, and so on

  We would like to know how integrating these Foglight 4 imforation.

  Where can I find documentation?

  Thank you very much!

  You can pull down the documentation foglight 4 from the site of Dell support as a starting point.

  David Mendoza

  Foglight Consultant

• WebLogic integration - using startWebLogic.sh

  Hello

  I need to get some servers from Weblogic instrumented in our test environment and need help to better understand the methods of automatic integration.

  We start our Weblogic - (Version 10.3 on Solaris) servers using 3 custom scripts under the DOMAIN_HOME - startManagedArx.sh, startManagedDDSServer.sh and startManagedIntDDServer.sh

  These scripts call DOMAIN_HOME/startWebLogic.sh

  When I run the FMS integration to point to the startWebLogic.sh and provide the field, he joined under DOMAIN_HOME/bin scripts. He also created 2 backups of the original startWebLogic.sh under DOMAIN_HOME/bin.

  I have to manually copy these scripts to integration in the real startWebLogic.sh used under the DOMAIN_HOME? If I do, is there any necessary changes to the configuration of FMS? Can someone guide me on how to proceed?

  Also in order to restore this configuration are there additional proceedings other than re reinstating the original script for startWebLogic.sh.

  Just to be safe.

  Have the startweblogic directly under DOMAIN_HOME scripts are probably not standard, a default installation has some startup scripts under

  DOMAIN_HOME\bin\. Corresponds to the script in DOMAIN_HOME\startweblogic.sh a copy of the script in DOMAIN_HOME\bin\?

  My problem with the manual copy is that it leaves this as process semi automatic (without papers with room for error), I guess if the scripts DOMAIN_HOME and DOMAIN_HOME\bin are the same you can do technically (copy the script), it means simply that if there is someone else who needs to do that they can miss this non-standard step (not knowing what you know and what) you did).

  In the interests of maintaining the structure of default installation it could have better for your startup scripts customized to actually use DOMAIN_HOME\bin\startweblogic.sh instead of DOMAIN_HOME\startweblogic.sh (while they follow the location of weblogic standard installation script). BUT if there was a specific decision which required changes and the startweblogic under DOMAIN_HOME and DOMAIN_HOME\bin are the same, you can try to copy the new script or changed from DOMAIN_HOME\bin to DOMAIN_HOME and see if it works.

  Here, there is another alternative which is keeping installation and standardized instructions and making integration manual http://edocs.quest.com/foglight/5610/doc/Cartridge-APM/JavaEECartridge-install/ManuallyIntegrating.5.php#424838

  This way you are creating a generic configuration and then adding the lines manually to the startweblogic you use.

  What is the advantage of this way?  He is always in standard and always documented, this way if someone should follow your work, they can always read the documentation and follow a path standard and documented to do things.

  As far as roll back configuration, this is the reason why we have these backups - you can just rename (and then later remove) new or modified startweblogic.sh and rename the backup/original to be startweblogic.sh.

  I hope this helps.

  Golan