StartScen.bat does not

Similar Questions

• Autoexec.bat does not run at startup.

  I have a file Autoexec.bat file which works fine when I run it, but does nothing, apparently, at startup.  It has orders to clear my recent documents folder.  It worked fine when starting until I had to format my hard drive and start all over again, and as I said, it works fine when operating manually.  No idea how to do so that he can run at startup?

  Hi bbran,.

  1. your computer is running on a domain?

  Autoexec.bat does not work on startup, but when the user connecting.
   
  The first thing to test when you are having problems with MS-DOS-based programs is the Windows BACK NTVDM (Virtual Machine) subsystem. You can use the Command.com utility to test whether the NTVDM subsystem works correctly. To start Command.com, follow these steps:
  a. click the Start button and then click Run.
  (b) in the Open box, type command.com, and then click OK.
   
  This should start a command prompt window. If this does not work, then there is a problem with the NTVDM subsystem.
  For more information, see programs running under MS-DOS in Windows XP

  We also recommend you to check if the program is configured to run automatically at startup.
  See related changes that run automatically at startup

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ERROR! Compile in car (CBLBLD. BAT) does not exist!

  1. set up two environment variables, PS_HOME and COBROOT, on the computer where you are going to compile COBOL. (This should be your file server or a machine that has access to your file server.) You can do this from a DOS command prompt window.
  
  Set PS_HOME = C:\hr840
  Set COBROOT = c:\netexpress\base
  
  2. open a DOS commands prompt window, if you have not already, orders and access
  \Setup < PS_HOME >.
  
  3. run CBLBLD. BAT as follows
  < compilation drive > cblbld < build directory >
  where < compilation > is the drive where the compilation takes place, < directory compiles > is the temp
  Directory where the compilation is done
  
  The CBLBLD. BAT file will create the directory to compile for you, if it does not already exist.
  
  Note. Be sure to include a space between the < compilation disc > and < build directory > parameters; they are treated as two different settings within the CBLBLD. Bat batch program. Also ensure that you have write permission < compile player > and < build directory > as the compilation process will take place there.
  
  For example, the following command will have the \src\cbl < PS_HOME > COBOL source and compiling process under c:\temp\compile:
  cblbld c: \temp\compile
  Take note of the information that appears on the screen during the process is running. It provides the location of important files that you need to consider.
  
  
  =========================================================================
  
  I followed all the steps above, but it is not executed
  
  Sometimes, I had
  
  D:\psoft\PT8.52\setup > CBLBLD CBLBLD. BAT D:\TEMP\COMPILE
  
  
  Compilations of Cobol ASCII doing
  ERROR! Compile in car (CBLBLD. BAT) does not exist!
  
  or sometimes I had
  
  D:\psoft\PT8.52\setup > CBLBLD c:\TEMP\
  
  ERROR - wrong number of parameters specified.
  
  Use: CBLBLD_MF CompileDrive CompileDirectory BUILD_option
  
  CompileDrive = the letter of the drive containing the directory
  the compilation takes place
  
  CompileDirectory = rΘpertoire in (CompileDrive)
  
  BUILD_option = "blank", ASCII, EBCDIC, and UNICODE
  
  Examples:
  C: CBLBLD_MF \TEMP\COMPILE ASCII compile
  C: CBLBLD_MF \TEMP\COMPILE ASCII ASCII compile
  C: CBLBLD_MF \TEMP\COMPILE UNICODE compile if unicode.cfg file
  There are
  C: CBLBLD_MF \TEMP\COMPILE UNICODE UNICODE compile
  C: CBLBLD_MF \TEMP\COMPILE EBCDIC EBCDIC compile for DB2/OS390
  
  General use / information
  
  During the build process, the following actions occur;
  
  The source files are copied
  of PS_HOME\src\cbl (D:\psoft\PT8.52\src\cbl)
  at CompileDrive\CompileDirectory
  
  The compiled modules will be copied
  of CompileDrive\CompileDirectory
  at PS_HOME\CBLBINDR (D:\psoft\PT8.52\CBLBINA, CBLBINA or CBL
  BOBY)

  Hello

  Please, try the following, add a blank space between C: and TEMP.

  CBLBLD. BEATS C: \TEMP

  Kind regards

• HQ - agent.bat does not start HQ 4.0.2 on x 64 Windows agent?

  Hello
  
  On a x 64 Win2k3 server I, which ran HQ 3.2.4 Agent very well, I have installed the new 4.0.2 agent, tried to run the AC - agent.bat and received this error message:
  
  C:\Program Files (x86)\hyperic-hq-agent-4.0.2\bin >./hq-agent.bat)
  \hyperic-HQ-Agent-4.0.2\bin\... \bundles\%j\bin\hq-agent.bat. was not planned at this time.
  
  When I walked in the... \bundles\agent-4.0.2-939\bin directory and run the UI program - agent.bat that is there, he has successfully started upward.
  
  Anyone know why this is happening?
  
  Thank you
  Brian

  Brian,

  in the last major version there is a Wrapper new Service from Java (JSW) in lieu of the hqagent.exe

  Your path is perhaps the problem:
  C:\Program Files (x 86)

  Could you try to move the central administration Agent to another folder without any special character?

  See you soon,.
  Mirko

• DeskJet F4283: uninstallL4.bat does not

  Hi forum

  I have a problem with my F4283 where solution Center will not open. I decided that I could just uninstall and reinstall the software, but during, uninstall Uninstall failed. With this information, I decided to reboot and try again. Same thing, uninstall failed. Then I decided that I could always try and install the software, but the installer was not as well.

  Read about different issues in this forum, I saw a guide on how to uninstall by using the uninstallL4.bat file. It works either, the 'back' part of the uninstall program is displayed for 1 second and then disappears. After this popup, nothing happens.

  I'm a bit lost with this error and I hope someone is able to support me.

  Claytality wrote:

  Hello

  Yes, I'm perfectly capable of performing all the tasks I want right now with the printer, but it just feels a bit wobbly to have an installation were partially the installation to fail. This is my reasoning behind wanting a complete uninstall, in order to ensure that future problems do not occur due to a failure of the installation.

  Try IOIbit Uninstaller.  Make sure you perform powerful analysis to end and remove all remninants.

  http://www.iobit.com/en/products.php?__c=1

• Beats Audio does not envy Touchsmart d039 23 after updates

  Nice day. I had problems with my wifi and bluetooth after than the 8.1 Windows update, but no problems with Beats Audio. After all the updates to automatically download for HP, it seems to have solved many problems, but now my new number is the Beats Audio does not work. After extensive research of the forums that I could find my Beats Audio Control Panel, however it does not engage and the its totally sucks now on my computer.

  Please help, is there a driver, the trick or the series of steps I can do to get this working?

  Thanks in advance

  M

  Hello

  Open Control Panel, Manager of devices.

  Expand sound, video and game controllers.

  Right click on IDT HD Audio

  Select uninstall. You may receive a prompt to remove drivers from your PC. Check this option.

  Restart your PC.

  Windows download and install bat if you have an Internet connection always on. Otherwise, open Windows updates and check the updated optional codec IDT.

  Download and install IDT.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• Audio 8.1 beats Windows does not

  Product name: HP ENVY TouchSmart Sleekbook 4

  After audio beats windows 8.1 update does not

  Download the file below and installing, restart and try your bat again. If you do not find beats go (Panel) and search (Beats Audio), then right-click on it and create a shortcut, you should now have a shortcut to Beats Audio on your computer (office)...
  
  I would like to know if this helps ...
  
  DOWNLOAD LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & softwareitem = ob-124012-1

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• Trying to enable and disable the scheduled tasks back but becomes "the name of the specified task * does not exist in the system.

  I am trying to create a .bat file that stops a set of scheduled tasks and start another game, but when it works it is said that there is no such thing as the name of the task

  SCHTASKS/Change/disable /TN ImageCopyTest
  ERROR: The name of the specified job 'ImageCopyTest' does not exist in the system.

  Running schtasks/query does not list the tasks that I have implemented in Task Scheduler

  For operational reasons, the tasks are set on "Run If the user is logged in or not ' and I read somewhere that this automatically makes the hidden task

  Can someone shed light on how I can get around what I need this operation for our recovery after disaster

  It's on Windows Server 2008 R2 Enterprise

  Hello

  Apologize for the delay in response. Because the question you posted is related to Windows Server and more complex than that which are usually dealt with here, this issue will be safer in our MSDN forums that cater to the more THIS professional audience.

  Thank you.

• CMD does not support the UCN paths

  I'm running on Windows Small Business Server 2011 Standard

  When I try to make a file beats for a video game called Minecraft to host a server using CMD, CMD comes up with this error:

  CMD. EXE was launched with the path under the current directory.
  UNC paths are not supported. Or by default in the Windows directory
  CMD does not support UNC paths as current directories.
  The system cannot find the path specified
  Press a key to continue...
  The lines of code that I type in the bat file is the following:
  OFF @ECHO

  BINDIR SET = % ~ dp0

  CD /D "% BINDIR.

  "% ProgramFiles%\Java\jre7\bin\java.exe" - Xms1024M-Xmx1024M-jar craftbukkit.jar

  BREAK

  I tried the search and said to use the word pushd and popd instead of CD. But I did not write that.

  I also found a site from Microsoft telling me to edit the registry using regedit.exe I went in the shell and make a new value DisableUNCCheck REG_DWORD.

  
  

  I restarted my PC but I still get the error, can anyone help me with this?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT ProTechNetpublic. Please post your question in theTechNet forum.

  http://social.technet.microsqoft.com/forums/en/smallbusinessserver/threads

  Hope this information helps.

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• wanted m6 ultrabook touch does not illuminate

  I'm a tactile m6 which gives me problems that I can't solve. It's been great until recently. I used my phone last nite when suddenly he died but I didn't know that the battery shoukd have been dead. his act as if the bat is empty and in reconnecting it turn right on orange led by the power supply. When I press the power button flashes for a second, but the screen does nothing and it does not in fact. I use my phone to try to find a solution atm which is very frustrating. Adding to the stress is the fact that I have school work projects and a draft medium-term do I have to finish.
  Almost forgot to mention he started doing some other weird things last week as the touch screen goes nuts record ghost key constantly until I hibernate/fence/stop it.

  Ok thank you. I was hoping that there might be some little thing I have no encpuntered had not yet but he was afraid that it's really just a hardware problem and you must call in. I'll try to do today if possible

• HP Pavilion dv9260nr does not start after the bios update

  After the HP Health Check, it was recommended that I have updated to the current bios.  After you have downloaded and installed, the computer would not start.  Instead, it emits a long beep and 2 short beeps and the screen is blank.  How can I recover a bios update failed?  Is there a way to return the computer to the bios Setup?

  I thought I would post here to help others as I just spent 5 hours to fix this problem. I have personally experienced this on two different computers, both are model DV9260NR. I woke up in the long and short two beep power. The first time it happened, I tried to fix the BIOS by using the recovery disk, but it didn't work. I tried this using a USB floppy like any other player. The floppy drive should get accessible, then machine would be on a second beep then stop, but it would remain under tension. The first time around I gave up and eventually return it to HP as it was under warranty. This time above the current problem computer is more under warranty so I decided to test out of old college. After trying several discs crisis different Phoenix, I finally found one that worked.

  I downloaded crisdisk.zip here:

  http://www.mediafire.com/?3ccb9m0kv0m

  Followed by the latest bios from HP for the DV9260NR

  FTP://ftp.HP.com/pub/SoftPaq/sp42001-42500/sp42187.exe

  I used 7 - zip to extract the files in sp42187.exe and crisdisk.zip

  go to the folder where you extracted sp42187.exe and rename it to 30BBF2D. WPH into the BIOS. WPH

  Copy BIOS.wph to the folder where your snippet CRISDISK.zip

  I have created my disk in Vista, so don't worry about going "Real DOS".

  YOU MUST USE CRISDISK TO CREATE THE DISC!  SIMPLY COPY THE RIGHT FILES ON A FLOPPY DISK DID NOT WORK!

  Open a command prompt, I used command.com not cmd.exe

  CD to the folder CRISDISK.

  At the prompt enter: "CRISDISK. "BAT HAS:

  Finally, put in a blank disk and follow the instructions.

  Once the disk created, slap this puppy in a floppy USB drive and plug it into the computer.  I didn't need to use as or Windows + B, B FN hotkeys to trigger the BIOS recovery. The system entered in the BIOS for me recovery mode and tried to access the USB floppy.  I noticed that not all USB ports will work.  I plugged my USB stick, floppy to the next to the power supply.  If all goes well just turn on the computer with connected USB floppy drive and the disc in the drive. As before the system beeps once per second during playback of the disc.  The disk activity, arrested again, but this time that the system kept beep immediately after discontinuation of access to the drive.  These beeps point you out that the BIOS is flashed, it's just leave turn. When it was made the machine itself set off.  If yours is not, so I doubt that the BIOS recovery will succeed. I then unplugged the USB floppy drive, turned on again and to my surprise I was greeted by the HP and the BIOS logo!  I hope this helps people difficulty of their DV9260NR.  I met four dv9260nr machines and two of them does not update the BIOS using WinPhlash and the finished machine trashed, not good statistically.  I hope that others with the same model will be able to get their machinery running. I'd be curious to know if it works for others.  Post here if you are or do not succeed using this procedure. Good luck!

• Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

  Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

  To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

  That's what * I * would call cleaning and optimization of a Windows XP machine:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• CA410 all-in-one will not be installed... does not detect the printer

  Help... cannot install printer s/w

  I have a PC running W7 64 bit

  Printer is all-in-one CA410B... It was installed and running, a couple of days he threw error "missing components" and would not printing software launch.

  Tried to re - install... failed

  Most recent downloaded software file... Tried to re - install... failed

  Removed all... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install "as Administrator"... failed

  Each time, it happens to the screen to plug the USB cord... I do it... get the "Boing" sound so I know PC has detected the USB device... and I see "Installing message device driver"... but the HP software does not see that... and stop right there.

  See the attached screenshot

  If I check the box to continue without attach printer full installation does not occur.

  In Device Manager, it says "Photosmart Prem c410" if I removethese it will not install

  I guess that W7 is detect the printer and with the help of a driver that is installed, rather than seeing the HP software that? the clues how to get around this, I want to get the complete package installed it again.

  

  Try using the brush included in the CD or download.
  Of the original printer installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  9. use this tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  10 download the drivers and full software features
  http://goo.GL/VQW7M
  11 start the download to reinstall the printer
  Starting a download:
  1. run the disk cleanup on your computer
  2. download and run the software and the drivers below.
  http://goo.GL/VQW7M
  3. once the download is done retrieve, cancel the download.
  4. click on the start menu.
  5. click on run.
  6. type %temp% enforcement
  7. Locate and open the folder starting with 7z (example: 7zS2356)
  8 open the Util folder
  9 open the CCC folder
  10. run the L4uninstall.bat
  11. once the uninstall is complete, restart the computer
  12 run the Accessories\ System Tools Disk Cleanup
  13. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  14 use this tool to clean the system and the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  15 download the drivers and full software features
  http://goo.GL/VQW7M
  16. run the download to reinstall the printer