E12 works not properly.  Can I re - upload and maintain the existing content of photos?

Similar Questions

• seems that I bought the wrong size stock photo because it shows the low resolution 20 x 30... How can I return it and get the right kind of photo?

  How can I return it and get the right size stock photo that actually works to post 20 x 30

  Hi Debbie,.

  Once that the photos were allowed, they cannot be removed or not allowed.

  Thus, you must make sure that the image you need for your projects. You can also check the size of the images before their approval.

  Hope that answers your question.

  ~ David

• Sudenly microphone not working not properly, might have something to do with the Realtek HD Audio

  Hello!

  I used my microphone every day of work for some time now and I had no problem. Indeed, the audio quality was really good. However, something must have happened yesterday because now the quality is really really bad. Levels are low, my voice is distorted, sometimes it even works at all.

  I messed around with the levels and microphone amp and everything is the same as before. I used to have my microphone attached to about 94% without any boost and the quality was very good.

  I think that I managed to reduce the problem to the audio thing Realtek HD, more precisely the improvements. I have a few options in the effects section. Speech recognition, Conference and personal appeal. I tried all of this, and while they all look horribly bad, you can hear the difference between these options.

  It's only when I use "turn the sound effects off all" I get a few audio decent. The levels are normal but there is a lot of background noise and ultimately, I won't be able to use it like this to work.

  I went on the Realtek site and I downloaded their latest HD Audio Manager. Although this seems to be a newer version than I had before, the problem is still there.

  Has anyone deals with this kind of thing before? Is there something I can do?

  I wonder if I might replace the DD Realtek Audio Manager altogether. There may be a few alternatives out there that I don't know.

  Thank you very much!

  EDIT: I connected just a USB audio interface external that I have. I have this before since I well there is no reason not to work perfectly, but I couldn't get decent levels out of it either. I used my phone as a microphone, since I have no other option on the spot, then maybe this isn't the best test.

  The only thing I did differently between Friday, when my microphone was OK and Monday, when he stopped working was plug an old USB gamepad. Who has messed up my touch screen, in the sense that it was not to accept any entry more. I just restarted my computer and everything was fine, but could he have messed up my audio also? There is no reason for that to happen...

  A final note, while an update Windows 8.1 could solve this problem, it isn't really an option for me. I am a user of Pro Tools, and from what I can tell, the 8.1 update would put an end to this.

  Hi Pantalonsfancie,

  I'm sorry for the inconvenience caused.

  Here in this scenario, I would like to know some information about this problem so that we can help you further.

  1 are you question in the face of any audio recording?

  2. you use any specific record software o record audio?

  3. that you get any error code or error message when you use this particular record software?

  4. have you checked is that the problem occurs with a different microphone?

  I would try the following and see if it works for you.

  Method 1:

  If you use a third-party recording software, then try the sound recorder in Windows 7 and check if it helps.

  See the following article from Microsoft Help to record audio with sound recorder.

  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  Method 2:

  Try installing the latest drivers, chipset and audio from the Web site of the manufacturer of the computer or from Windows Update and check if the problem persists.

  See the following Microsoft Help article for updating a hardware driver that is not working.

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please reply with the status of the issue so that we can better help you.

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• I tried to tap three fingers on the trackpad to find the definition of a word in an article.  It did not work.  How can I put a definition of the word in an article published in El Capitan?

  I tried to tap three fingers on the trackpad to find the definition of a word in an article.  It did not work.  How can I put a definition of the word in an article published in El Capitan?  I googled this question and he said to three fingers on the trackpad, of the band which is what I tried without success.

  carolfromknoxville wrote:

  I tried to tap three fingers on the trackpad to find the definition of a word in an article.  It did not work.  How can I put a definition of the word in an article published in El Capitan?  I googled this question and he said to three fingers on the trackpad, of the band which is what I tried without success.

  Highlight the word, right-click on it and select "search... "with the white line that represents all that is the word.  It will pull up from the definition in the dictionary.

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Edit in Photoshop as greyed out.rebooted several times does not properly, can someone advise?

  Creative could use, recently not able to 'Edit in Photoshop' as grayed out. I uninstalled both and restarted several times now. Still does not properly, can anyone advise?

  Hi sandy,

  Please check the image you try to change, the Images should not miss the Lightroom library.

  Please try and complete the step with a different image.

  Kind regards

  ~ Mohit

• Satellite A50 - 109 fan works not properly after the HD upgrade

  Yesterday, I upgraded the HD of my laptop A50-109 of 3 months. The original HD installed in the laptop was (to my surprise) a Fujitsu HD 40 GB 4200 RPM 2 MB cache.

  So I've upgraded to a Toshiba 80 GB 5400 RPM 16 MB of cache and had to re - install Windows XP Pro and all the drivers of toshiba.

  Now, since the upgrade, the fan is constantly working even when CPU power, cooling method and all the others are on the lowest setting possible. Before the upgrade, the fan would obey the parameter of cooling method and the fan would be COMPLETELY silent, IE does not work because there was minimal use of the CPU, etc.

  Now the situation has changed, and the fan runs constantly no matter what use. I am terribly disturbed by noises, and I see no reason for the change.

  Is there a solution or should I return the HD or laptop?

  Hi Simon,.

  A very interesting discovery.

  Kind regards

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' &amp; I have the latest version of T.

  Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T. I just need to download the SENT MESSAGES, Inbox not only.

  Re: Where is 'account settings '.
  If you do not see 'Tools', then you do not have your active 'Menu Bar'.
  See picture below on the activation of all the toolbars make life easier.

  Different methods of location of the 'account settings ':
  Via the toolbar "Menu Bar":

  • Tools > accounts settings

  Through the pane of folders:

  • Right-click on the name of the e-mail account in the folders pane, and then select "settings".

  Via "Menu Icon.

  • Menu icon > Options > account settings

  Re: I need to download sent Messages Inbox not only.
  E-mail accounts IMAP see a remote view of the files on the server.
  You subscribe to view these folders in Thunderbird.
  You synchronize directories subscribed for a copy in Thunderbird.
  What you do in a folder for example imap: delete, will occur on the server, so viewing via webmail or Thunderbird folders appear identical.

  However, in your case, it seems that you have created a POP e-mail account.
  E-mail POP accounts can only connect to Inbox server and download server Inbox for the Thunderbird Inbox pop e-mail account.
  It's not a quirk of Thunderbird; This is how all Pop mail represents the work.

  There is a work around to get "sent" in the folder mail sent from server in Thunderbird. You just do it once, because when you send it through Thunderbird, it will put the e-mails in the folder sent TB pop mail account and not on the server.

  Thunderbird creates a "Sent" folder when first send you an email.
  So, if you have not yet sent an email, please send one, even if only to yourself.

  Then, move all inbox emails in the appropriate folders.
  You can create new folders to organize them.

  How to create a new folder:

  • Right-click on the name of the e-mail account, and then select "new folder."
  • Give an appropriate file name and click "create a folder".

  When the Inbox is empty:

  • Logon to the Web e-mail account by using a browser.
  • Move all emails "Sent" in the "Inbox".

  In thunderbird:

  • Click on 'Get the message'

  all the "Sent" emails must get downloaded from the server Inbox anto your Inbox in Thunderbird.

  • Then move all your emails in the 'Sent' Thunderbird folder.

  You should now have all these emails downloaded from the server and display in Thunderbird.

• Once an unapproved site is added as an exception, how can I go back and delete the exception later?

  Once an unapproved site is added as an exception, how can I go back and delete the exception later?

  Thank you, Jefferson. You addressed the issue beautifully and delightfully complete.

  I found and deleted the server where I got the exception.

  "In the future, I suggest, by making an Exception, uncheck the box that adds a permanent exception. In this way, when you exit Firefox, the exception is removed automatically. »

  AHA. It's very good to know. I missed it when granting the exception today.

  The exception I gave (and now deleted) today wasn't really a risky site. I know the owner. Just a little problem in their relationship.

  Thanks again. And thanks Toddy... I did not say clearly what type of exception.

• I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

  I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

  It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

• G61 does not illuminate unless I have remove and replace the battery.

  Even when the power cord plugged in it will not light. If I remove and replace the battery it lights mode battery and AC. At the same time my HP Support Advisor and HP s Advisor "stopped working".

  I restore to a previous point, no help. Downloaded a new HP advisor, ho help.

  This happened after the recent big WIN7 updated. Help

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  Kind regards

  DP - K