E1810 Fault error

Hello

I have a Dell Power Edge 2900 with a Perc 6 / i controller version 1.11.82 - 0473.  The display shows "E1810" fault on HDD 2 error and HARD drive 4.  The two bad drives blink Orange. The controller is configured in raid 5 and displays the Raid status as offline.  Under "VD Mgmt" 2 hard drives are missing.  Under 'PD Mgmt' just 3 show online and the other two are not appear at all.  2 drives being missing, I can rebuild the table?  Any help on how to proceed would be greatly appreciated.

No, with 2 hard drives in a RAID 5, data offline are gone. If none of the disks offline show never no status (that is, they are completely dead), then there is nothing you can do (except professional data, such as DriveSavers Recovery). You need one of the two disks to show a foreign State or offline.

Switch off, reconnect the two disks, turn it on and see if you see a status for the reader to the PD MGMT screen.

Tags: Dell Servers

Similar Questions

  • Rman cloning (Segmentation fault) error

    Hi all

    Oracle version: 10.2.0.1
    Operating system: linux

    When we tried to make rman cloning by catalog, we get the following error here my clon database is on a server and my target and clon of database to Server B.

    Please find the below error.
    [oracle@test1161 ~]$ rman catalog rman/rman target sys/qfund@test
Recovery Manager: Release 10.2.0.1.0 - Production on Sun Jan 23 22:24:05 2011

Copyright (c) 1982, 2005, Oracle.  All rights reserved.

connected to target database: TEST (DBID=2034916279)
connected to recovery catalog database

RMAN> connect auxiliary sys/poor123@poor

connected to auxiliary database: POOR (not mounted)

RMAN> duplicate target database to poor;

Starting Duplicate Db at 23-JAN-11
starting full resync of recovery catalog
full resync complete
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=155 devtype=DISK

contents of Memory Script:
{
   set until scn  22564684;
   set newname for datafile  1 to
 "/u02/poor/oradata/system01.dbf";
   set newname for datafile  2 to
 "/u02/poor/oradata/undotbs01.dbf";
   set newname for datafile  3 to
 "/u02/poor/oradata/sysaux01.dbf";
   set newname for datafile  4 to
 "/u02/poor/oradata/users01.dbf";
   set newname for datafile  5 to
 "/u02/poor/oradata/example01.dbf";
   set newname for datafile  6 to
 "/u02/poor/oradata/poorna.dbf";
   set newname for datafile  7 to
 "/u02/poor/oradata/bigtbs_01.dbf";
   set newname for datafile  8 to
 "/u02/poor/oradata/lak_tbs01.dbf";
   set newname for datafile  9 to
 "/u02/poor/oradata/vir2_01.dbf";
   set newname for datafile  10 to
 "/u02/poor/oradata/lak_tbs2_01.dbf";
   set newname for datafile  11 to
 "/u02/poor/oradata/vir_user01.dbf";
   set newname for datafile  12 to
 "/u02/poor/oradata/vir_bigf01.dbf";
   set newname for datafile  17 to
 "/u02/poor/oradata/hrscott.dbf";
   restore
   check readonly
   clone database
   ;
}
executing Memory Script

executing command: SET until clause

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

Starting restore at 23-JAN-11
using channel ORA_AUX_DISK_1

channel ORA_AUX_DISK_1: starting datafile backupset restore
restoring datafile 00003 to /u02/poor/oradata/sysaux01.dbf
restoring datafile 00004 to /u02/poor/oradata/users01.dbf
restoring datafile 00005 to /u02/poor/oradata/example01.dbf
restoring datafile 00006 to /u02/poor/oradata/poorna.dbf
restoring datafile 00007 to /u02/poor/oradata/bigtbs_01.dbf
restoring datafile 00008 to /u02/poor/oradata/lak_tbs01.dbf
restoring datafile 00009 to /u02/poor/oradata/vir2_01.dbf
restoring datafile 00010 to /u02/poor/oradata/lak_tbs2_01.dbf
restoring datafile 00011 to /u02/poor/oradata/vir_user01.dbf
restoring datafile 00012 to /u02/poor/oradata/vir_bigf01.dbf
restoring datafile 00017 to /u02/poor/oradata/hrscott.dbf
channel ORA_AUX_DISK_1: reading from backup piece /u01/app/oracle/product/10.2.0/db_1/dbs/1pm2tq5e_1_1
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/u01/app/oracle/product/10.2.0/db_1/dbs/1pm2tq5e_1_1 tag=TAG20110124T124846
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:01:45
Finished restore at 23-JAN-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "POOR" RESETLOGS ARCHIVELOG
  MAXLOGFILES     16
  MAXLOGMEMBERS      3
  MAXDATAFILES      100
  MAXINSTANCES     8
  MAXLOGHISTORY      292
 LOGFILE
  GROUP  1 ( '/u02/poor/oradata/redo1a.log' ) SIZE 50 M  REUSE,
  GROUP  2 ( '/u02/poor/oradata/redo2a.log', '/u02/poor/oradata/redo2b.log' ) SIZE 50 M  REUSE,
  GROUP  3 ( '/u02/poor/oradata/redo3a.log', '/u02/poor/oradata/redo1b.log', '/u02/poor/oradata/redo3b.log' ) SIZE 50 M  REUSE
 DATAFILE
  '/u02/poor/oradata/system01.dbf'
 CHARACTER SET WE8ISO8859P1


contents of Memory Script:
{
   switch clone datafile all;
}
executing Memory Script

released channel: ORA_AUX_DISK_1
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=741272711 filename=/u02/poor/oradata/undotbs01.dbf
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=741272711 filename=/u02/poor/oradata/sysaux01.dbf
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=741272711 filename=/u02/poor/oradata/users01.dbf
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=741272711 filename=/u02/poor/oradata/example01.dbf
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=741272711 filename=/u02/poor/oradata/poorna.dbf
datafile 7 switched to datafile copy
input datafile copy recid=6 stamp=741272711 filename=/u02/poor/oradata/bigtbs_01.dbf
datafile 8 switched to datafile copy
input datafile copy recid=7 stamp=741272711 filename=/u02/poor/oradata/lak_tbs01.dbf
datafile 9 switched to datafile copy
input datafile copy recid=8 stamp=741272711 filename=/u02/poor/oradata/vir2_01.dbf
datafile 10 switched to datafile copy
input datafile copy recid=9 stamp=741272711 filename=/u02/poor/oradata/lak_tbs2_01.dbf
datafile 11 switched to datafile copy
input datafile copy recid=10 stamp=741272711 filename=/u02/poor/oradata/vir_user01.dbf
datafile 12 switched to datafile copy
input datafile copy recid=11 stamp=741272711 filename=/u02/poor/oradata/vir_bigf01.dbf
datafile 17 switched to datafile copy
input datafile copy recid=12 stamp=741272711 filename=/u02/poor/oradata/hrscott.dbf

contents of Memory Script:
{
   set until scn  22563972;
   recover
   clone database
    delete archivelog
   ;
}
executing Memory Script

executing command: SET until clause

Starting recover at 23-JAN-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=158 devtype=DISK

starting media recovery

archive log thread 1 sequence 23 is already on disk as file /u02/archive/1_23_741021347.dbf
archive log thread 1 sequence 24 is already on disk as file /u02/archive/1_24_741021347.dbf
archive log thread 1 sequence 25 is already on disk as file /u02/archive/1_25_741021347.dbf
archive log thread 1 sequence 26 is already on disk as file /u02/archive/1_26_741021347.dbf
archive log thread 1 sequence 27 is already on disk as file /u02/archive/1_27_741021347.dbf
archive log thread 1 sequence 28 is already on disk as file /u02/archive/1_28_741021347.dbf
archive log thread 1 sequence 29 is already on disk as file /u02/archive/1_29_741021347.dbf
archive log thread 1 sequence 30 is already on disk as file /u02/archive/1_30_741021347.dbf
archive log thread 1 sequence 31 is already on disk as file /u02/archive/1_31_741021347.dbf
archive log thread 1 sequence 32 is already on disk as file /u02/archive/1_32_741021347.dbf
archive log thread 1 sequence 33 is already on disk as file /u02/archive/1_33_741021347.dbf
archive log thread 1 sequence 34 is already on disk as file /u02/archive/1_34_741021347.dbf
archive log thread 1 sequence 35 is already on disk as file /u02/archive/1_35_741021347.dbf
archive log thread 1 sequence 36 is already on disk as file /u02/archive/1_36_741021347.dbf
archive log thread 1 sequence 37 is already on disk as file /u02/archive/1_37_741021347.dbf
archive log thread 1 sequence 38 is already on disk as file /u02/archive/1_38_741021347.dbf
archive log filename=/u02/archive/1_23_741021347.dbf thread=1 sequence=23
archive log filename=/u02/archive/1_24_741021347.dbf thread=1 sequence=24
archive log filename=/u02/archive/1_25_741021347.dbf thread=1 sequence=25
archive log filename=/u02/archive/1_26_741021347.dbf thread=1 sequence=26
archive log filename=/u02/archive/1_27_741021347.dbf thread=1 sequence=27
archive log filename=/u02/archive/1_28_741021347.dbf thread=1 sequence=28
archive log filename=/u02/archive/1_29_741021347.dbf thread=1 sequence=29
archive log filename=/u02/archive/1_30_741021347.dbf thread=1 sequence=30
archive log filename=/u02/archive/1_31_741021347.dbf thread=1 sequence=31
archive log filename=/u02/archive/1_32_741021347.dbf thread=1 sequence=32
archive log filename=/u02/archive/1_33_741021347.dbf thread=1 sequence=33
archive log filename=/u02/archive/1_34_741021347.dbf thread=1 sequence=34
archive log filename=/u02/archive/1_35_741021347.dbf thread=1 sequence=35
archive log filename=/u02/archive/1_36_741021347.dbf thread=1 sequence=36
archive log filename=/u02/archive/1_37_741021347.dbf thread=1 sequence=37
archive log filename=/u02/archive/1_38_741021347.dbf thread=1 sequence=38
media recovery complete, elapsed time: 00:00:04
Finished recover at 23-JAN-11

contents of Memory Script:
{
   shutdown clone;
   startup clone nomount ;
}
executing Memory Script

database dismounted
Oracle instance shut down

connected to auxiliary database (not started)
Oracle instance started

Total System Global Area     524288000 bytes

Fixed Size                     1220384 bytes
Variable Size                134217952 bytes
Database Buffers             385875968 bytes
Redo Buffers                   2973696 bytes
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "POOR" RESETLOGS ARCHIVELOG
  MAXLOGFILES     16
  MAXLOGMEMBERS      3
  MAXDATAFILES      100
  MAXINSTANCES     8
  MAXLOGHISTORY      292
 LOGFILE
  GROUP  1 ( '/u02/poor/oradata/redo1a.log' ) SIZE 50 M  REUSE,
  GROUP  2 ( '/u02/poor/oradata/redo2a.log', '/u02/poor/oradata/redo2b.log' ) SIZE 50 M  REUSE,
  GROUP  3 ( '/u02/poor/oradata/redo3a.log', '/u02/poor/oradata/redo1b.log', '/u02/poor/oradata/redo3b.log' ) SIZE 50 M  REUSE
 DATAFILE
  '/u02/poor/oradata/system01.dbf'
 CHARACTER SET WE8ISO8859P1


contents of Memory Script:
{
   set newname for tempfile  1 to
 "/u02/poor/oradata/temp.dbf";
   switch clone tempfile all;
   catalog clone datafilecopy  "/u02/poor/oradata/undotbs01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/sysaux01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/users01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/example01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/poorna.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/bigtbs_01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/lak_tbs01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/vir2_01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/lak_tbs2_01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/vir_user01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/vir_bigf01.dbf";
   catalog clone datafilecopy  "/u02/poor/oradata/hrscott.dbf";
   switch clone datafile all;
}
executing Memory Script

executing command: SET NEWNAME

renamed temporary file 1 to /u02/poor/oradata/temp.dbf in control file

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/undotbs01.dbf recid=1 stamp=741272727

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/sysaux01.dbf recid=2 stamp=741272727

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/users01.dbf recid=3 stamp=741272728

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/example01.dbf recid=4 stamp=741272728

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/poorna.dbf recid=5 stamp=741272728

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/bigtbs_01.dbf recid=6 stamp=741272728

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/lak_tbs01.dbf recid=7 stamp=741272728

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/vir2_01.dbf recid=8 stamp=741272728

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/lak_tbs2_01.dbf recid=9 stamp=741272728

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/vir_user01.dbf recid=10 stamp=741272728

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/vir_bigf01.dbf recid=11 stamp=741272729

cataloged datafile copy
datafile copy filename=/u02/poor/oradata/hrscott.dbf recid=12 stamp=741272729

datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=741272727 filename=/u02/poor/oradata/undotbs01.dbf
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=741272727 filename=/u02/poor/oradata/sysaux01.dbf
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=741272728 filename=/u02/poor/oradata/users01.dbf
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=741272728 filename=/u02/poor/oradata/example01.dbf
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=741272728 filename=/u02/poor/oradata/poorna.dbf
datafile 7 switched to datafile copy
input datafile copy recid=6 stamp=741272728 filename=/u02/poor/oradata/bigtbs_01.dbf
datafile 8 switched to datafile copy
input datafile copy recid=7 stamp=741272728 filename=/u02/poor/oradata/lak_tbs01.dbf
datafile 9 switched to datafile copy
input datafile copy recid=8 stamp=741272728 filename=/u02/poor/oradata/vir2_01.dbf
datafile 10 switched to datafile copy
input datafile copy recid=9 stamp=741272728 filename=/u02/poor/oradata/lak_tbs2_01.dbf
datafile 11 switched to datafile copy
input datafile copy recid=10 stamp=741272728 filename=/u02/poor/oradata/vir_user01.dbf
datafile 12 switched to datafile copy
input datafile copy recid=11 stamp=741272729 filename=/u02/poor/oradata/vir_bigf01.dbf
datafile 17 switched to datafile copy
input datafile copy recid=12 stamp=741272729 filename=/u02/poor/oradata/hrscott.dbf

contents of Memory Script:
{
   Alter clone database open resetlogs;
}
executing Memory Script

*Segmentation fault*
    Please help me solve the problem.

    Thank you and best regards,
    Kahina Prasad.S

    Published by: SIDDABATHUNI on January 24, 2011 13:28

    After there alert.log of the AUXILIARY instance

  • 0utlook Express won't allow emails in. account with pop3.slingshot.co.nz. they can find no fault. error 0x800CCC90 0x800CCC90 error number.

    Outlook Express will not accept in the emails.
    I have an pop3.slingshot.co.nz account
    I sent an email to myself: it came out, but could not get!

    Slingshot has checked their end and everything is ok,
    Turned off the computer for 1/2 hour periods
    Have turned off broadband for 1/2 hour

    Read an error message:
    No, server 0x800CCC90 error
    0x8000420CD error number

    Help please

    See if you can get webmail to work well here: http://www.slingshot.co.nz/ If Yes, then make sure that you do not have your antivirus value analyze them.  See www.oehelp.com/OETips.aspx#3 .  It's a face more issues that can mess things up.  Then try to delete your account, close OE and then reopen it, and then add the account back again.

    see if that helps.

    Steve

  • Try to install Windows Vista KB2904266 and it keeps fault - error code 800F0818

    I tried to install the update of Windows Vista KB2904266 for a few weeks now and it keeps failing. Really, it isn't as if it were still able to install anything - 0% installed.  Then I have a 800F0818 code error update failed.  Other updates were installed successfully, but it will not be installed.  I had others fail too in the past.  I do not understand why some updates install successfully while others do not.

    Q: is- KB2904266 theonly update that fails to install or...?
    Re: [Yes]

    Q: do you reside in Morocco, Libya, Fiji Islands or in the mid-Atlantic area (i.e., UTC - 2)?
    Re: [No.]

    Do not hesitate to leave hidden KB2904266.

  • Continuous backup fault: error 0 x 81000033

    I get the error message: 0 x 81000033 when I try to run backup.

    I tried various devices of backup with sufficient disk space.

    Hello

    If you have any security software installed on the computer it would take more time for the backup center to back up files. Try to disable security software and try to make a backup and verify.

    If it works fine afterwards, enable the security software.

    Follow the link for more information

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    You can also run the disk cleanup utility and check if that helps.

    Start disk cleanup

    http://Windows.Microsoft.com/en-us/Windows7/start-disk-cleanup

    Also try to run a check disk to the hard drive.

    To run the disk check

    1. open the computer by clicking the Start button, click computer.

    2. right click on the hard drive you want to check, and then click Properties.

    3. click on the sur l' onglet tab Tools and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

    To perform a full disk check, select search for and attempt recovery of bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

    To check for errors file and the physical errors, select automatically fix file system errors and search for and attempt recovery of bad sectors.

    4. click on Start.

    Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

    For more information follow the link

    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    After performing a check disk try to run the backup process and check if this is useful

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • App Store - purchases fault - error does not: PMT50016

    Hello Palm,

    I am in the United States and for the last week or more, whenever I'll try to make a purchase from the App Catalog/Store.  I get the error message "Unable to purchase".  When I press about to exclamation/message I get the following:

    "Couldn't buy" - him point could not be bought.  Try again later. PMT50016.

    First of all, I thought that it was a problem with the specific application, I was trying to buy, but I have tried others and I still got the same message.

    I checked my CC on file and nothing seems to be wrong with it.  Also, I rebooted the phone several times, so do not know why this error would occur.  In the past, I had been able to make purchases with success.

    Anyone else having this same problem...? If so, is there a solution?  Palm is aware of this problem? S ' Please help.

    Thanks for your help!

    This issue has been addressed. Please let know us if you're still having problems.

  • Fault error tolerance has 45%

    Hello

    Voila en to I try to place the fault tolerance, I have set up my ports by selecting good FT

    But when longitudinal fault tolerance of a vSphere VM me up a mistake,

    Who staff an idea?

    Thanks in advance

    Hi Robin,

    You should find a part of the answer in this KB:

    Good luck!

    A +.

    Franck

  • Satellite Pro A40 psa45e - error code: what is the problem of flashing

    I just bought the laptop above Satellite Pro A40 (psa45e - 0184 h - en), which came with a generic power.
    The great laptop worked until the other night.

    The light on the power supply is on, output is 15 Volt, turns on the laptop at the front, an orange light comes on and blinks 5 then 2 then 1, I guess the 521 error code.

    Unplug everything and the light goes out then two green lights turns on, then laptop has started twice and started upward (running xp) but then freezes.

    I guess the power supply stopped working and the chip has noticed the problem.

    Can anyone confirm the fault error is feeding or is there something else wrong.

    Need to know before you buy the Toshiba power, I don't want to lose more money.

    Help, please...

    How much is your generic AC adapter?

    The amps must be the same or greater than what your laptop needs. You can view the Volts + Amp requirements based on the laptop (serial sticker).

    So if the laptop needs 15v 8A... you need a 15v 8A or 9A 15v or AC adapter / higher CC.

    If the amps are too weak, in the custom of mobile devices get enough power and could cause damage.

    You should get yourself a good Toshiba adapter for peace of mind. Cheap generics can be more trouble than they are worth.

  • HP Mini 311 - HP battery alert - main (internal) (601) - error at startup

    I have a HP Mini 311-1037NR (the product number is VBM262UA #ABA).   My OS is Windows 7 Home Premium.

    When I start my HP Mini 311, I get the following message:

    HP battery alert

    The system has detected the following battery storage capacity is very low.  For optimal performance, this battery will need to be replaced.

    Battery (internal) (601)

    ENTER - continue starting

    So my questions are:

    First of all, what exactly is the problem here? After that I Googled, it would seem that the problem is NOT my external battery, but my battery.  Which battery is need of replacement?  Has it a name?

    Second, is there a user guide out there that could help me with the process of replacing that someone can provide a link, or least send me the page that helps me?  Is there a YouTube video (even better)?

    Third, what exactly is the part number of the battery that needs replacement and exactly where can I get this (how much $$ it cost)?  This issue is important because I can be able to know how to replace the battery, but without the possibility to buy a replacement battery, I'm still dead in the water.

    Fourth, my HP Mini 311 dies just when I unplug the unit.  A remedy for the above question will remedy this issue?  I really enjoy using my little HP Mini's, I prefer to be able to use it without a power cord.

    Thanks in advance for any help.

    Tim

    Hi Tim,.

    No problem and it is certainly wise to check a response.

    I would say that you posted your question to the correct Board.  It is generally preferable just post once on the relevant map.  I agree that the term "internal" causes unnecessary confusion.

    Here is a link to your & Maintenance Guide.

    Yes, I am sure that the 601 error code refers to the main battery of your laptops (602 is a failure code for machines that have a secondary storage unit).  Interestingly, there is no code generated for an RTC battery fault - error or one in the diagnostic test built for her, than the usual symptom of the system clock reset after each stop.

    There is also a document from HP about alerts on the following link starter battery.

    http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c01443470#n534

    Best regards

    DP - K

  • 86 Windows protection error.

    Protection fault
    Error: 86 Image here:
    http://www.mediafire.com/imgbnc.php/9869d1cc140b102e02aa6552911025f3385c875a5ec7779ee639c40e4655706d6g.jpg

    Sometimes small window opens during the exploration of the error message files. Then when I click 'ok' to delete it explore crashes, the taskbar disappears and explorer.exe will restart. Windows explore which were open naturally disappeared, and so I need start exploring again from the beginning. This product even when no other application does, and of course, it always seems to happen when I'm pressed...
    I googled the problem without success. What is error 86?

    I tried (I also thought that surely someone must know), but all I could find was a reference to an obsolete version of WinAVI and I think than another (which could not have involved WinAVI) where someone said they noticed more frequently when opening files with the video files it contains.

    Here's the part of this thread involving WinAVI:

    http://originaltrilogy.com/forum/topic.cfm/WinAVI-Q/topic/4172/

    So if you go to the page of WinAVI and hunt, there are other people and then they get an update that fixes it.

    If you don't use of WinAVI, you have another type of video edition/visualization (apart from the usual free) software installed?  Is there something that you can do at almost any time you want?  Your records have to video files and/or can you make the error occur just about anytime you want on a certain folder?

    I read another story - the guy with the problem had an embarrassing record, so it makes a new folder, copied all his stuff from the record embarrassing in the new folder, and so he worked in the new folder, he has not seen the error once again (allegedly).  So if you can reproduce or see more often by going to a certain folder, you may want to see if this strategy works for you.

    But you say that you see as sort of chance - could be Bitdefender (I did not check their forums since I don't use it).

    I looked in some other forums where I hang out and found a few references, but no solution.

    There is another MS (TechNet) forum where you can get some eyeballs more / different about your problem:

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

    I also spend time here who has some good people:

    http://www.bleepingcomputer.com/forums/Forum56.html

    Don't forget to include this link to screenshot - which should be a good clue and someone can recognize it instantly.  Images are very useful and save a lot of Q & A.

    Now if you understand, you come back and tell me here because I'm curious too!

    BTW - I think that you will get no response more than any Microsoft Support Engineer - they seem to just give you an answer "keeps" with some links for things to try (try to clean boot, try boot secured, try sfc/scannow and see if this helps), and then it's the last that see you of them.  Then, other people have to enter and finish the troubleshooting.

    If you come here, and this thread is going in slow motion, on 2 December, I predict the answer Gokul will be regarded as 'response' (that's the way it works here - check my profile).

  • Fault bucket 0x23_Ntfs. NtfsDeleteSch + 1f4, type 0

    I had a blue error screen twice in a few months.  Each time, diagnostic tests has come and the notebook has restarted the next time.  I was not installing additional equipment/programs.

    instructions for reporting on the problems and solutions got me this far, with the identification of the fault bucket listed above.  (It is possible that the value 0 should be Os, but I was not able to select and copy).

    If anyone knows what to do to prevent one determine, I would be grateful to hear about...

    Bucket fault errors can be caused by several things.  Sometimes, it is a program that uses memory incorrectly.  In addition, it may be a hardware problem with the RAM itself.
    You can Google RAM TEST and find the programs that will test your RAM.  MS makes one that you perform a boot disk and run it.
    In addition, it never hurts to open your computer and make sure that the RAM is installed.  The last time I saw a lot of random errors bucket that has proved to be 2 of 3 RAM sticks have not been properly installed.

  • Build fails on ESXi - fault. RestrictedVersion.summary

    Hi all

    I have a problem running the build process on an ESXi 4.0 in my lab with VMware Studio 2.1.

    I have several faults. RestrictedVersion.summary errors, the first is:

    20/02/2011 11:34:07 [warn] error ReconfigVM:
    SOAP fault:
    -----------
    Error string: error. RestrictedVersion.summary
    Lack of details: RestrictedVersionFault
    20/02/2011 11:34:07 [warn] Impossible to reconfigure boot delay for VM transition
    20/02/2011-11:34:07 [error] met a unrecoverable build error!

    After that almost every line of the error is the error RestrictedVersion the end of it.

    I've seen a few threads talking about a free version of ESXi with these errors, but they were for VMware Studio 2.0 in beta, so I don't know if they are relevant to my case.

    Also, I didn't see any known problem or a problem of compatibility in the 2.1 release notes.

    This is a full release of the file debug.log from the first line of the error:

    20/02/2011 11:33:57 [dbug] VM completed transport.
    20/02/2011-11:33:57 [info] checking if the XX. XX. XX. XX connection is still active...
    20/02/2011 11:33:57 [dbug] reconfiguration VM on the host configuration.
    20/02/2011 11:34:07 [warn] error ReconfigVM:
    SOAP fault:
    -----------
    Error string: error. RestrictedVersion.summary
    Lack of details: RestrictedVersionFault
    20/02/2011 11:34:07 [warn] Impossible to reconfigure boot delay for VM transition
    20/02/2011-11:34:07 [error] met a unrecoverable build error!
    20/02/2011-11:34:07 [info]
    20/02/2011-11:34:07 [info]
    20/02/2011 11:34:07 [info] cleaning...
    20/02/2011 11:34:07 [info] cleaning of provisioning host...
    20/02/2011-11:34:07 [info] checking if the XX. XX. XX. XX connection is still active...
    20/02/2011-11:34:07 [info] checking if the XX. XX. XX. XX connection is still active...
    20/02/2011 11:34:07 [dbug] Unregistering < XX. XX. XX. XX_BUILD_NAME > of < XX. XX. XX. XX >.
    20/02/2011 11:34:08 [warn] error UnregisterVM:
    SOAP fault:
    -----------
    Error string: error. RestrictedVersion.summary
    Lack of details: RestrictedVersionFault
    20/02/2011 11:34:08 [info] transitional VM withdrawal of configuration host.
    20/02/2011-11:34:08 [warn] cannot delete < XX [DATASTORE_NAME]. XX. XX. XX_BUILD_NAME > of < XX. XX. XX. XX >: fault. RestrictedVersion.summary
    20/02/2011-11:34:08 [warn] impossible to removed the data store VM
    20/02/2011-11:34:08 [dbug] wait 10 seconds before starting again...
    20/02/2011-11:34:18 [info] checking if the XX. XX. XX. XX connection is still active...
    20/02/2011 11:34:18 [info] transitional VM withdrawal of configuration host.
    20/02/2011-11:34:18 [warn] cannot delete < XX [DATASTORE_NAME]. XX. XX. XX_BUILD_NAME > of < XX. XX. XX. XX >: fault. RestrictedVersion.summary
    20/02/2011-11:34:18 [warn] impossible to removed the data store VM
    20/02/2011 11:34:18 [dbug] < ESX > logout.
    20/02/2011 11:34:18 [info] cleaning of provisioning host...
    20/02/2011 11:34:18 [dbug] < ESX > logout.
    20/02/2011 11:34:18 [dbug] deleting a link symbolic opt/vmware/www/build/.0.
    20/02/2011 11:34:18 [info] deleting temporary files.
    20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/will

    20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/will 2 >/tmp/zebp2k5fnb".
    20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
    20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/install

    20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/install 2 >/tmp/4xtv2JYMJe".
    20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
    20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/repo

    20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/repo 2 >/tmp/gdoAWfKyCE".
    20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
    20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/customize


    20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/customize 2 >/tmp/zKErK753Vz".
    20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
    20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/script

    20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/script 2 >/tmp/ASdXoBrSNM".
    20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
    20/02/2011-11:34:18 [info] Build/Validation successfully interrupted the process.

    I have edited a few customer information like IP address and names to build.

    I'd appreciate your thoughts on them.

    Thank you

    Yair

    Welcome to the community,

    the reason for the error is indeed the free version of ESXi.

    of http://www.vmware.com/support/developer/studio/studio21/studio_developer.pdf

    The build fails with the following error string:

    fault. RestrictedVersion.summary

    Put into service through ESXi with free ESXi license generates this error because ESX capabilities required for commissioning are not available. The evaluation of ESXi license (which ends in a given period of time) or a paid license will solve this problem.

    André

  • Is it safe to uninstall SP3 in Microsoft Windows XP, 64 version after several months of course of installation.

    I just discovered that SP3 is not for Windows XP with 64 processor. I forgot to update but I must have installed it because my information system confirms that it came with SP2. The question is, is - this course uninstall after this long period especially since I added other programs since.

    Coinsidently, I discovered this problem during my research of fault error that does not allowmy system to perform updates micorsoft. Your contribution is appreciated. THX

    Service packs help keep Windows up to date, and they can extend and update the functionality of your computer

    Service packs can contain updates for system reliability, program compatibility, security, etc.

    You can uninstall Windows XP SP3 as a troubleshooting step if you encounter problems after installing the service pack. As you have installed SP3, months ago, it may not be the cause of the problem that you are facing. However if you want to uninstall SP3 visit the link below

    http://support.Microsoft.com/kb/950249

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • M277 LaserJet MFP Pro: Printer 10 Windows just stopped working

    My printer worked for at least a month after the upgrade to Windows 10, and then it stopped working.

    Initially, I didn't find any game by default, and the ability to set it wouldn't work.  I tried to run the software install, V14309, but the installer just turn and quit, finally tells me to restart.  I did, the default value of the printer was there, I could change the default, but it wouldn't print and finally gave me a protection fault errors, telling me that the printer was not installed on this computer and restart my computer.

    Help!

    An update:

    After several reboots, the software uninstalled the software installation and after a reboot, I then reinstalled it.  He printed a copy of test, but when I checked on the printer to set preferences, it wrong agin similarly and told me not to have any software installed!

    A final update, I think:

    When I reinstalled the software I notice 2 printers: the original and a (1 copy) and the installation had set the default version (copy 1).  I tried to use the original and is the one who has failed and exploded with the error 0x1f622f2b.

    I then tried (copy 1) and guess what: what WORKED ON!

    Why is it so I have no idea.

    I spent a very unproductive hour, trying to get the help of telephone support HP in India.

  • Can not get GPS through AMA0 data

    Hi Tom,

    I'm unable to read data from the GPS using AMA0. I was hoping that you or someone else might have a few suggestions...

    Everything seems fine using the TTY cable and the USB port. I can launch 'gpsd' and read the data using "cat/dev/ttyUSB0 '. "gpsmon" also gets data OK.

    When I wire the UART on the GPIO builtin GPS, I get nothing. The command "gpsmon/dev/ttyAMA0" returns a few seconds with a message "failed to Select (2).  The command "cat/dev/ttyAMA0" crashes, as it doesn't do anything. I checked several times and seem to have the correct changes in the files/etc/inittab and/boot/cmdline.txt. I also checked the wiring, and everything seems OK: GPS is powered, establishes a fix, etc. I even tried the continuity of the follow-up on the wires; still, everything seems fine.

    I tried running 'gpsd' interactively as suggested on the GPSD troubleshooting page and get the following:

    PI@raspberrypi ~ $ sudo gpsd/dev/ttyAMA0 - n - N - D3 f /var/run/gpsd.sock

    GPSD:info: launch (Version 3.6)

    GPSD:error: cannot create IPv6 socket

    GPSD:info: listening on port GPSD

    GPSD:info: NTPD ntpd_link_activate: 1

    GPSD:info: fix the/dev/ttyAMA0 device at location 0

    GPSD:info: open the GPS 2 data source type to "/ dev/ttyAMA0".

    GPSD:info: KPPS cannot define line PPS discipline: invalid argument

    GPSD:info: PPS cycle: 1226960683, duration: 1226960683 @ 1403544999.685931

    GPSD:info: speed 9600, 8N1

    GPSD:info: speed 9600, 8O1

    GPSD:info: speed 9600, 8N1

    GPSD:info: gpsd_activate(): activated GPS (fd 6)

    GPSD:info: device/dev/ttyAMA0 active

    GPSD:info: running with the staff of the group ID 20

    GPSD:info: running with the UID number 65534

    GPSD:info: starting in 2014-06-23 T 17: 36:42.000Z (1403545002)

    I get the IPv6 socket error when running on the USB port too, so I don't think that it is important here. Because baud rate 9600 is communicated, I guess that the GPS is to talk. I get the same results with 'gpsmon' and 'chat' like when I run 'gpsd' like a demon.

    Using 'dmesg', I see the following:

    PI@raspberrypi ~ $ dmesg | grep AMA0

    dev:F1 [0.529731]: ttyAMA0 to 0 x 20201000 (irq = 83) MMIO is a PL011 rev3

    I would appreciate any suggestions on what to try next... No one else in the forum seems to have this problem, and I have exhausted other sources of Pi. Using the Java ME code gives the same results. Thank you...

    P.S. FYI, I ran in a "Segmentation Fault" error during the shooting to the top "sudo. / usertest.sh'. Java ME 8.1 resettlement seemed to remedy...

    Dave

    Hi Tom,

    This has proved to be a hardware problem. I tried to connect the GPS module directly on the GPIO pins and things worked well. I traced the problem to the socket on the test set-up; specifically, the RXD pin had no continuity between the socket and the Board of Directors. I pulled the plug and then reset had continuity again. Somehow, the header RXD pin was not making contact in the test set-up, even if it has not been folded and seemed fine. Strange, and certainly not what I expected...

    Thanks again for your help,

    Dave

Maybe you are looking for