E3000: Unable connect wireless devices

Similar Questions

• Unable connect wireless desktop to the internet but internet works through a cable.

  ORIGINAL TITLE: Wireless connection 4 "not connected - a firewall.

  Laptop remote picks up WiFi connection fine, cannot use desktop for so hard wired internet. Can see WiFi, wireless card enabled is green and on the list of exceptions etc. I'm missing something. Help is appreciated.

  Because I couldn't find the problem, I bypassed it with a Netgear USB wireless adapter and all is good for now. Thanks for the help, it was a learning experience.

• E3000 loser on multiple devices wireless connectivity

  Problem with router Linksys E3000 (firmware 1.0.02). I have problems with the following wireless connections:

  iPhone 4G (female)

  iPod Touch 2 G

  PC with Wi - Fi (adapter brand Linksys no)

  NetBook Acer (not Linksys adapter brand)

  It comes from the connection is interrupted and dropped, but the devices and the router DHCP clients table indicate that connections are always present. By interruption, I mean that no data traffic is transmitted.

  IPhone 4 G to the my iPod Touch Wi - Fi my son and wife show that they are connected to the network home, with WiFi bars displayed, and the check mark is present next to the home network connection in the device for both settings. When I check the table of DHCP E3000 customers, two Apple devices are listed as with a connection. Yet the two devices to display network errors when you try to use any application that connects to the internet. By raising the wifi on each connection, the connection is restored to the point where traffic passes now. My wife and son believe it's after 10 minutes they encounter interruptions.

  On the PC and NetBook, connections must be terminated and reconnected. I've not timed to see how long before the connection becomes problematic.

  Interestingly, my ASUS laptop and my iPhone 4G do not have the issue, nor did my (Dell) laptop.

  There is no time-out setting in the router config. Thing the closest is the beacon interval, but I don't know which way to adjust (up or down) to help the devices which are undergoing interruptions. I did not a setting of the interval... at this moment, everything is set to the default settings.

  The E3000 replaced an old WRT54 (v2 hardware) router so that I could have a N router in the House.

  Thank you
  -Phil

  How about you change wireless channel? If you do not, then you should try it. Using the two bands, 2.4 Ghz and 5 GHz? If so, make sure they have different but unique SSID. Have you tried to remove the Security Wireless for testing?

• Unable to connect to Internet wireless device is not found

  I disabled somehow my Dell XPS laptop computer and I can't log on the internet. I can not even find the 'Connect To' button in the start menu. My wireless device cannot be located using the hardware and sound which is under the control panel. I have Windows 7. I was trying to understand why my computer was not load the latest updates from Microsoft. I thought I found the solution on the forums and when I tried what has happened and now I can not even find how I got into this mess. I really hope someone can help me. Thank you

  I thought about it. Finally managed to find the link that me trouble: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windows-7-pro-64-bit-10-updates-fail-to-install/2493fd34-9d3d-47b8-a592-bd0183399b2c

  Four hours later and all is well except that I still haven't understood updates. Who will save for another day.

• 871W wired connect/ping with wireless devices

  Hello

  I have a 871W giving me fits.  I've been troubleshooting this for some days now and may not know what I am doing wrong.  My wired clients cannot communicate with wireless devices.  My wireless devices are unable to communicate with each other.  However, my wireless devices CAN connect to a wired device!  I know because I have a local webmail server on the side wired can be achieved wireless.  All devices, wired and wireless, are on VLAN 1, which is be the only vlan configured.

  My configuration file properly disinfected is attached.

  When I try to ping from a wired device to a wireless device, I get the following error:

  ~ $ ping 172.27.44.27
  PING 172.27.44.27 (172.27.44.27) 56 (84) bytes of data.
  From 172.27.44.3 icmp_seq = 1 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 2 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 3 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 4 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 5 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 6 Destination Host Unreachable

  -172.27.44.27 - ping statistics
  8 packets transmitted, 0 received, + 6 errors, 100% of time packet loss 7051ms
  pipe 3

  ~$

  Wireless devices simply timeout trying to ping each other.

  Thank you for your help.

  Chris

  Is there a firewall on the host wireless?

  Do you have wiresharked any traffic to see if it is to hit the dest host?

  Look at the config looks ok. Some additional ACL that I've not seen it used is here.

  Can ping wireless and wired a public IP address?

• Unable to connect wireless on Satellite L300D-13 s

  Bought this new laptop Satellite L300D-13 s
  The wireless doesn't seem to work, are the switch and the light and the device manager says theres nothing wrong with my hub driver seems to work very well with my laptop more old etc so I think as my hubs ok. Is it a commen problem?

  Its a BT home Hub so this is useful and if I use the cable between the hub and the laptop it works very well and connects to the top with a problem, please help

  Hello

  The laptop supports Realtek 802.11 wireless network card b/g, but it has not been equipped with BT module.
  So if you want to connect wireless you must first activate the WLan on your laptop computer (WLan switch on IT and FN + F8).
  Then it must be set up correctly using the right SSID, wireless encryption, Mac address, etc.
  Also make sure that your router supports standard WLan even as the WLan card.

  Welcome them

• Set up the wireless access point, but the wireless devices are unable to get ip address

  Hi, I wanted to put my D7000 as router AP. My main router is Sagemcom F@st 3864 by Optus ISP (Australia).

  First of all, I put the D7000 in Bridge mode I did these steps:

  1. replace the IP LAN 192.168.0.100

  2 disable DHCP

  3. connect the LAN port to the main router Lan port

  Internet connection wired and wireless on the same device but other wireless devices has failed

  To remedy this, I made another choice, allowing point-to-point wireless access in the advanced settings of the D7000. I followed the instructions from this link

  http://KB.NETGEAR.com/app/answers/detail/A_ID/24104/~/how-do-i-change-my-Nighthawk-router-to-AP-mode...

  I put dynamiccaly = wireless internet cable success but peripheral does not have an ip address

  No idea how to fix wireless? I'm not very experienced

  Thank you!

  I just fixed it just now. For AP mode, connect the LAN port of the main router to the WAN port on the D7000 (not LAN to LAN). I wish I thought to it much sooner.

• Wired device (PC) connected as a wireless device

  Dear All - my lists of connected router my PC connected to the modem as a wireless device. How to configure my router D1500 to the list as a wired device. I plugged a cable ISP.

  Thanks for help.

  Tapas

  Thanks for your reply. I've tried it. There are 3 rear - 2 yellow (LAN1, LAN2/WAN) ports and an ADSL grey. The cable can only be mounted one or the other of the two yellow ports. It worked not on port LAN1 but working in the other port.

  However, I do not know how, now, the problem seems solved. The basic home screen display properly wired device (PC) and wireless (my laptop) it connected the modem router.

  With best wishes,

  Tapas

• Unable to share the wireless internet with other wireless devices

  Original title: I'm trying to share the wireless internet on my computer with other wireless devices, are don't see is not the other.
  Internet through my wireless computer connections are not visible to my other devices. How can I fix it so that my other devices will be found and connected.

  Hello

   
  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3. what version of operating system you are using on the computer?
  4. What wireless device you try to share?

  Method 1:
  You can try the steps in the link and check.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  I suggest to turn on network discovery, and check if this helps you solve the problem. To do this, please follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  Method 3:
  If the problem persists then you can disable firewall on the computer and check.
  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.

  For more information about how to resolve common network problems, please see the links below:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

• Password to connect the printer to the wireless device

  Nobody knows what the password to default to connect a device like a wireless phone to the PhotoSmart 6525?  Alternatively, how do reset you the password?  I can't find on the touch screen of the printer anywhere.

  Pat

  Hi draftsman,

  I see that you are looking for a way to find the password or clear to the wireless directly on the Photosmart 6525. I managed to find a way to display the password, if it does not you should be able to restore the default values for the network.

  If you select Wireless > wireless Direct > show password, you should be able to see it there. If this does not work, go to Wireless > network by default. Restore the network default settings erases all settings, allowing you to turn Direct wireless and at this time, you can set a new password or not.

  I hope this helps.

• After traveling with my laptop, I am unable to connect with my connection wireless home

  After traveling with my laptop, I am unable to connect with my connection Wireless at home.  What I am doing wrong?

  Hello

  ·         What operating system do you use?

  ·         You are able to connect through wired network?

  .         You get the error message?

  Follow the steps in troubleshooting from the link and check if that helps:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you use follow Windows XP KB article troubleshooting steps and check if it helps:

  How to troubleshoot wireless network connections in Windows XP

  http://support.Microsoft.com/kb/870702

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

• Wireless devices cannot connect to each other using the router EA6900

  I use the 2.4 Ghz network and none of my wireless devices are able to communicate with each other...  I could not connect to a wireless printer to my laptop wireless (through the router) and thought it was unusual.  I tried ping does not work either.  I then plugged a cable ethernet to the laptop and could ping the printer wireless without a problem.   I tried other devices (wired and wireless connections) and it seems that no wireless device can ping any other wireless device.  If, however, one of the devices is connected, it works fine...  All wireless devices to connect to the router and internet without problem... It's just when they try to communicate with each other.  I have experimented with the desktop using the ethernet adapter, then the wireless adapter... same results.  My wireless using my previous router devices could communicate with each other.  It's almost as if this device has insulated AP running if this so-called it doesn't support that.

  Customer service said: I'm the only one with this problem.  Does anyone else have this problem?

  I have an ea6900 and it works fine for me. Sounds almost like you are connected to the guest network which would be sort of this way. Did you do a power reset? It has never worked? Try to remove the power and back to see if it clears up it.

• EA4500 - a wireless device of many with internet connectivity problem

  Hello

  I wonder if anyone can comment on a subject that I have with a (a) wireless on my home network devices.  The problem is that a Dell laptop knows slow or no internet connectivity using wireless at all.  Sometimes 1-2 minutes to load one page, other times the message 'not able to display the Web page' dreaded.  That's using Ethernet.  I have another laptop (brand/model exact even) and it has no problem.  I also have a Macbook Pro and other IOS from Apple (iPod/iPad) devices which are very good.  Several connected Ethernet devices are very good as well.  The laptop in question had no problem with my previoius Linksys devices, which are a BEFSR41/WAP55AG and a WRT-54GS v2.  This laptop was the first day or two on the EA4500, but something happened that causes this problem.  I had to add the WAP55AG on my network so my son is happy again, but my plan was to dismantle the other devices.  Suggestions regarding what I can do to fix this are greatly appreciated.

  Thank you.

  EA4500 Firmware v.2.0.37

  Laptop Dell Inspiron 15 w/Intel Centrino Wireless N1030, 1 x 2 bgn (2.4 GHz) + Bluetooth

  Hello

  Thanks for the suggestion.  I tired who, but it did not work.  I then called Dell and they found that the wireless adapter on battery power has been set to maximum power saving.  Changed for maximum Performance and it's been very well.  Fortunately there is nothing wrong with the router.  Thanks again for the suggestion.

• Unable to connect new devices to the network

  I have a WRT610N which does not allow me to connect all devices to the wireless network. He is a recent problem I was able to connect new devices before. Devices on the wireless network, those who have been on the network are able to disconnect and reconnect. That new devices are excluded. Went through the admin screens to see if something is wrong, but can't find anything. Any suggestions?

  Disable wireless security all the and try to connect with any temporarily.  Make sure that the MAC address filtering is DISABLED.  If you can connect now to go back and add the security on.

• I had to reinstall my windows OS and now I can't connect to a wireless device, tells me that it cannot detect any wireless network hardware

  original title: Wireless help network device

  Help, please. I had to reinstall my windows OS and now I can't connect to my wireless device. When I try it tells me that it cannot detect any wireless network hardware. I am currently connected via my laptop air card. Please help me to find and correct the problem.

  Have you installed all of the correct drivers?