E3200 status for the Port issues

Similar Questions

• The OCSP server has no status for the certificate

  From just today, whenever I try to access www.fanfiction.net, I get this error message from FF: -.

  "Secure connection failed".
  An error occurred during a connection at www.fanfiction.net. The OCSP server has no status for the certificate. (Error code: sec_error_ocsp_unknown_cert) "

  I already tried removing the Cert8.db and Secmod.db and uncheck only the two OCSP parameters d ' option in advance. Neither work. The site is accessible to any other browser so it's really Firefox question.

  Need advice on how to fix this ASAP.

  the issue seems to have been fixed by the site already, you can go ahead and give security.ssl.enable_ocsp_stapling to true.

• Something similar to groups of objects, but for the ports? (must be used on an ACL)

  Hello community!

  I'm fairly new, when it comes to firewalls, but I have some experience with routers and switches, so I'm not completely lost.

  Practically, we all know that a group object is a large bucket to throw things and then managing them as a single group, which is very useful for many reasons... so is there something similar that we can use in an ACL for the port?

  Say so, let that I want to allow the following ports:

  • 80
  • 443
  • 25
  • 30500
  • 20500
  • 8080
  • 14600
  • 21
  • 753
  • 22

  And instead of doing something like this:

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 80

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 443

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 25

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 30500

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 20500

  access-list extended dmz_access_in permit tcp host WEB host WEB-EXT eq 8080

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 14600

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 21

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 753

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 22

  do something like:

  dmz_access_in list extended access permit tcp host WEB host WEB-EXT eq PORT_LIST1

  Thank you!!

  PD: Excuse me if some port above are not TCP, if just one example. I just start typing all the numbers that came to my head.

  Hey Rolando,

  On a SAA, you can combine services and protocols based on the source/destination in an object-group service oriented. Your example would look like this:

   object-group service PORT_LIST1 service-object tcp destination range 21 22 service-object tcp destination eq 25 service-object tcp destination eq 80 service-object tcp destination eq 443 service-object tcp destination eq 753 service-object tcp destination eq 8080 service-object tcp-udp destination eq 14600 service-object tcp destination eq 20500 service-object tcp destination eq 30500

  You can create also integrate groups:

   object-group service WEB_PORTS service-object tcp destination eq 80 service-object tcp destination eq 443 object-group service PORT_LIST1 group-object WEB_PORTS service-object ...

  This type of group is going where the Protocol is specified in the ACL:

   access-list dmz_access_in extended permit object-group PORT_LIST1 object HOST object EXT-WEB

• Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I cannot ope

  Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I can't open any pdf on my computer now.

  Hi brets49833316,

  If you have purchased Adobe Acrobat Pro DC as an upgrade, then a serial number of the previous version which you have like Acrobat X or XI. If in the case where you have not bought one of these in the past, then you must buy Acrobat Pro DC as full version (US $449.00).

  In this scenario, you can return the version upgrade and purchase the full version. To return the Contact Customer Service

  Thank you

  Abhishek

• I can't install my AD018640672 order number because you ask for the previous issue. Adobe came with my computer I don't have that. Can you help me!

  I can't install my AD018640672 order number because you ask for the previous issue. Adobe came with my computer I don't have that. Can you help me!

  Hi bobj39626549,

  We could certainly help you.

  If she asks for the previous version number, then you could acquire a version upgrade.

  You must purchase the full Acrobat version so that it can be installed and activated with the serial key.

  Hope that helps.

  Kind regards

  Ana Maria

• I do a layout of paper every two weeks; This time, when I opened my model, set up for the next issue when I typed 'W' to display the grid I have something totally different than previously, a background grid which is more annoying.  Why in the world

  new to InDesign 6 months I do a newspaper page layout every two weeks.  This time, when I opened my model, set up for the next issue, when I typed "W" to display the grid, I have something I never saw elsewhere. ".  The background was filled with a new grid of tiles rather than the void behind the newspaper that I'm used to seeing.  I don't know what happened, but it seems that Adobe has tinkered once more with the program.  The last time this happened, I lost the icon "cover the columns" at the top; now, it's a case of two steps to put the head-lines across more than one column.  NOT useful.

  There is probably a command or a term, I don't know that this right but my main question is why, when I did this dozens of times before, doing something different will come this time.  (I know, without replica.)

  I'd also appreciate comments that someone out there could offer re why now when I tap on InDesign, is there a slight pause before that something happens to the screen.  What is my new Mac, or something to do with the program that I can fix it?

  Thanks, Sacie

  It looks like the grid of the document, which can be disabled in the view menu.

• WebGate to access server connection status:-different status for the AM service

  What will be the effect if I pass ON the "Access Management Service" in Webgate. I understand that it will take to have the value WE for AccessServer-SDK. Died in Webgate translates into the following test posted on Webgate of the access server connection to the ' page.
  

  Does not
  Different status for the AM service

  thank you!
  Kabi

  Hi k,

  You only need the access management API if you are explicitly using the API Policy Manager (custom application), or for certain operations during some integrations (for example with Weblogic). Then, you can just assign it 'No' on all access servers and WebGates, or to 'Yes' If you think that you use.

  Kind regards
  Colin

• Problems with static IP setting for the port forward through 2 routers

  I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.

  I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.

  Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.

  1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.

  2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.

  3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.

  4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?

• Reference number for the Port Replicator for Toshiba Tecra A10 - 11I necessary

  Hello

  I hope my question short and precise to get a short response and precise.

  To search for the product mentioned on the Internet, I would need the model number Toshiba Replicator port for Tecra A10 - 11I. I am sure that such a product is, I think I saw somewhere.

  Thank you

  bwprius

  Hello

  I think you could use the Express Port Replicator Docking Station PA3508E-1PRP

  It should be compatible with the Tecra A10 series.

  Search in google for this part number and you should find some nice offers

• What Win XP driver is required for the port DV on a Satellite Pro P100

  Which driver "specifically" is held by Win XP on a Satellite Pro P100 DV port?
  Toshiba provides this driver on the download page?

  Win XP does not recognize the camera into the DV port.
  It does not recognize the camera a few months ago but not detect it when it is connected.

  I don't know what changes have been made since then. Can I simply re - install the proper drivers?

  Thanks in advance.
  Tom

  Hello

  DV port? Do you mean the iLink (firewire port)?
  You have a camcorder?

  I can connect my camcorder to the laptop using the firewire cable and firewire port.
  There is no special driver for the firewire port. The Windows operating system contains the own drivers that control this port.

  Maybe you should remove the device and then Manager should restart the operating system. This allows to recognize the FireWire again

• Page setting for the Port SG200-26 1.4.0.88 corrupt firmware / Firmware Bug?

  Hello

  After the upgrade to 2 switches SG200-26 version 1.4.0.88 firmware, I am unable to set up the CONFIGURATION of the PORT page.

  See the attached images.

  Must be a bug in the firmware.

  Please notify for the solution!

  Hello Dimitris,

  According to the instructions mentioned in the release notes, the downgrade is possible. Please you have the boot updated as well (it is a part of the firmware package)? (answer to this question does not depend on possibility of downgrade).

  What about other browsers, don't know you the same problem with Firefox or Chrome?

• Status for the workflow IN. monitor say complete workflow with errors

  Hello
  
  I changed the PO notification by changing the associated plsql package. Now when I see IN. notices in the notification window it display correctly.
  
  When I search the same PO in State control in charge of workflow administrator, I get the following error.
  =============================
  [WF_ERROR] ERROR_MESSAGE = 3835: error '-20002 - ORA-20002: 2018: impossible to generate the XML notification. Caused by: 2020: error getting to content of the notification. Caused by: ORA-04061: current status of has been invalidated ORA-04061: current state of the package body 'APPS '. PO_WF_PO_NOTIFICATION"has been invalidated ORA-04065: not executed, altered or abandoned the package body"APPS. PO_WF_PO_NOTIFICATION' ORA-06508: PL/SQL: called program unit is not found: 'APPS. PO_WF_PO_NOTIFICATION' wf_notification. GetAttrDoc2 (2975647, ACTION_HISTORY, text/html)' encountered during execution of the function Generate ' WF_XML. Generate ' event 'oracle.apps.wf.notification.send '. ERROR_STACK = WF_MAIL. GetLOBMessage3 (2975647, WFMAIL, 2020: error getting notification content.) Caused by: ORA-04061: current status of has been invalidated ORA-04061: current state of the package body 'APPS '. PO_WF_PO_NOTIFICATION"has been invalidated ORA-04065: not executed, altered or abandoned the package body"APPS. PO_WF_PO_NOTIFICATION' ORA-06508: PL/SQL: called program unit is not found: 'APPS. PO_WF_PO_NOTIFICATION' wf_notification. GetAttrDoc2(2975647, ACTION_HISTORY, text/html) Wf_Notification.GetAttrDoc(2975647, ACTION_HISTORY, text/html) Wf_Notification.GetText(2975647, text/html) Wf_Notification.GetBody(2975647, text/html) WF_NOTIFICATION. GetFullBody(nid => 2975647, disptype => text/html) WF_MAIL. GetLOBMessage3(nid => 2975647, r_ntf_pref => MAILHTML), step-> text/html body layout) WF_XML. GenerateDoc(oracle.apps.wf.notification.send, 2975647) WF_XML. Generate(Oracle.apps.WF.notification.Send, 2975647) WF_XML. Generate(Oracle.apps.WF.notification.Send, 2975647) Wf_Event.setMessage(oracle.apps.wf.notification.send, 2975647, WF_XML.) Generate) Wf_Event.dispatch_internal)
  =============================
  
  How can I make sure workflow completed without error.
  
  Thanks in advance

  957031 wrote:
  How can thanks for the useful update, I perform steps below

  1. stop the sender of the Notification and the workflow delayed Notification Agent listener
  -How can I shutdown Notification Mailer and deferred Workflow Notification Agent listener

  see the MOS note:
  Workflow Java Mailer & Notifications FAQ [ID 562551.1]
  and http://docs.oracle.com/cd/A60725_05/html/comnls/us/fnd/fndwfmal.htm

  2nd recompile the applications through ADADMIN schema
  -What are we by schema recompile APPS through ADADMIN, do what this means we must compile all invalid objects of the apps schema.

  check
  http://docs.Oracle.com/CD/A97501_01/Acrobat/11iadutil.PDF

  Thank you

• Satellite A100: Language for the Vista issue

  Hey all,.

  I just bought myself a Satellite A100 something something with Vista Home premium.

  When I turned on the computer on windows, it has proved to be the French. That in itself is not surprising, as I live in Belgium, where people speak Dutch and French. "Not a problem," I thought: "this manual is in French, Dutch and English, and therefore all the documentation.

  I'm sure the restore disc has all three languages out there, and I'll simply choose English. Or even the Dutch one for that matter. Anything other than the French! »

  So I start from the restore disc, and, Oh surprise, there are three languages out there: French, Dutch and English. Unfortunately, the computer won't let me choose any language but French because "you have selected French, now, you're stuck with it. (off bugger) ", or something like that.

  Unfortunately, I never selected French: the Distributor, or Toshiba himself has made. Is it possible to bypass this protection, or I'll have to return the laptop and make sure that I do not get a French?

  Thank you

  Menno

  Hello

  One question: has Vista already installed on the laptop when you started the laptop for the first time?
  Usually the Vista operating system there are on the HARD drive, but if you turn on the laptop for the first time, you should get the CONFIGURATION window and you should be able to set all the parameters such as language, country and keyboard by yourself.

  By the way; This is not a bug in recovery CD! As far as I know, you can only choose one language from the recovery CD that supports 3 languages. I guess that this State is saved in the BIOS or elsewhere and you can select only this language which was chosen at the first time.

  In your case I contact the dealer of the new laptop and ask the guy if they or someone else has already installed the OS on this laptop

• See the bandwidth for the Port-Channel on Powerconnect & Force10

  Reference Dell dear community,

  Y at - it a command CLI or GUI to see how much bandwidth result after having done a port channel in some port Powerconnect and Force10? Suppose we have 4 port 1 Gb and do 4 ports with 1 port-channel. So actually in this channel port have a bandwidth of 4 GB.

  In Cisco, with the command show interface port-channel 1, we get the result

  switch #sh po int 1
  Port-channel 1 is up, line protocol is up (connected)
  Material is EtherChannel, address is 0064.4026.739a (bia 0064.4026.739a)
  MTU 1500 bytes, BW 4000000 Kbit, DLY 10 usec,
  reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  KeepAlive set (10 sec)
  Full duplex, 1000 Mbps, link type is auto, media type is unknown
  input stream control is turned off, output flow control is not supported
  Members in this channel: Gi0/1 Gi0/2
  Type of the ARP: ARPA, ARP Timeout 04:00
  Last entry of 00:00:00, 00:04:48 output, output hang never
  Final cleaning of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0
  Strategy of queues: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 2000 bps, 3 packets/s
  5 minute output rate 2000 bps, 3 packets/s

  But if we do this command on Powerconnect, the just result inform port that starts from the port-channel.

  Reference Dell #show interfaces port-channel 1 short

  Ch-Type Hash Type Min-links Channel ports local FRP
  -------   ----------------------------- -------- --------- --------- ---------
  PO1 Active: Static disabled people article gi1/0/1, gi1/0/2 7 1 article
  Item in gi1/0/3, item in gi1/0/4

  Type of hashing algorithm
  1 - the source MAC, VLAN, EtherType, source module and port Id
  2 - destination MAC, VLAN, EtherType, module source and port Id
  3 - source IP and TCP/UDP source port
  4 - destination IP and destination TCP/UDP port
  5 source/Destination MAC, VLAN, EtherType, MODID/source port
  6 source/Destination IP and port TCP/UDP source / destination
  7 - improved hash mode

  Can you help us find the answer?

  Thank you

  Kind regards

  Aziz

  The PowerConnect switches do not have the ability to show as much detail as the Force10 can. The RMON tables have an interface use %, what may be the closest we can do on the PowerConnect switch.

  #show rmon statistics

  I've seen some monitoring software which was able to question the switch via SNMP and get some information of bandwidth. However, this can be a bit inconsistent, according to which switch and what software is used.

  The MIBs/OID can be downloaded with the software switch.

  http://www.Dell.com/support/home/us/en/rc959303/products/ser_stor_net/networking/net_fxd_prt_swtchs

• Downloaded version COMPLETE but always asked for the previous issue as if it were an upgrade.

  

  So I got the serial number for the standalone edition Adobe Photoshop Lightroom 5 students and teachers that I bought on the Adobe online store.  After downloading, I received a serial number.  When I installed the software and tried to activate using the provided serial number the pop-up box said that the number I provided me for a version upgrade and that I needed to provide the serial number of the previous installation. something I did not because I've ever owned before Lightroom.

  Before you start, I was very careful in the choice of the FULL version, please see the image attached to the basket that clearly indicates that I bought the full version.  In addition to the e-mail with the serial number gave no indication that I bought the upgrade version.

  So my question is, how do I get a serial number not update that works with the software I have installed?

  OK thanks for being clear.  I will come back and reorganize the software and re-open this discussion if necessary.