E4200/DirecTV receiver network question

Similar Questions

• Hang the blu ray to tv with a directv receiver

  My TV has a directv receiver.  Instructions for PDE S1100 scanner says all I have to do is hook the HDMI cable from the player blu ray to TV, but when I do, the TV says that I have no signal.  Am I supposed to hook the blu - ray for the receiver directv so somehow?  If so, how should I do this?

  Hi Nicky2000!

  You can follow this link to get the procedure so there is no image when you use a HDMI connection.

  If my post answered your question, please mark it as "accept as a Solution.

• E4200: comments of networking and MAC filtering

  Hello

  I have my e4200 with active network guest and also MAC filtering installation. Somehow, I've been epxecting MAC filtering to do not apply to the network without comment thread, but it seems to be the case.

  Can someone confirm please if this is the case and if there is a work around?

  beautifulbeatrice wrote:

  It depends on which option you select. There is an option to prevent certain MAC address to connect to the network and an option to allow certain MAC addresses to connect. It depends on what you choose. Please see the link below for more information.

  Furthermore, network comments shouldn't be assigned to Wireless Mac Filter restrictions.

  Setting up wireless MAC filtering to prevent users to connect to the network wirelessly on your L...

  Setting up wireless MAC filtering to permit users to connect to the network on your Linksys Wireless...

  ^ ^ ^ Too bad the guest network is affected by the MAC filter.

• Can you tell me why I'm received not allowed to modify a pdf file when I file creater?  I received the question as surity?

  cantrxoraqi9 you tell me why I'm received not allowed to modify a pdf file when I file creater?  I received the question as surity?

  If a form has been made with LiveCycle Designer, it can only be edited in LiveCycle Designer. This is a permanent restriction, there is no course Acrobat. It is not a security problem.

  LiveCycle Designer forms cannot be made available as far as I know (but I could be wrong here).

  If repeat you a similar content to PDF format, there is no way to reintegrate into the designer. You cannot mix the tools in this way. It is possible in LiveCycle Designer, or it is not possible at all.

• Network questions and caused by the Apple TV 4

  My apologies for the long post...

  I bought a new Apple TV 4 this week an upgrade to ATV3. The main reason for this is to get proper access to my subscription of Apple's music on my living room AV setup - it would have been nice to get just a small update on the ATV3 to work well with Apple music!

  In any case, the addition of this innocuous little device seems to have caused all sorts of questions about my home network.

  I have connected the ATV4 using ethernet to my Virgin Super Hub, made the simple configuration via iPad and has proceeded to explore - everything seemed fine. Even downloaded the speedtest excluding interest and who reported a healthy 90 + MB. Made the usual check for updates and this 9.0.1 installed.

  First of all, we noticed the following aspects with the ATV itself:

  1. During the operation, she would bring "no network connection.
  2. By looking at the network settings it shows connected Ethernet but had lost it's previously that would deal with DHCP and DNS details
  3. It does not recover
  4. Just physically remove the cable disconnected and reconnected would force it to find an address - done interesting a different each time. Other devices on the network tend to have the same address (as is usually the behavior, I expect), but he may then lose later
  5. In addition, when it is connected to the speed sometimes fall causing stuttering/buffering of the same Apple music / local libraries
  6. If the ATV4 is awakened from his "sleep" he also still not address
  7. I removed the Ethernet and tried the same thing with Wi - Fi - it presents a similar loss of address - so I conclude its not related to the transport

  I did the usual restart/re-Multi-Power of router, switches and access points - I have an Apple Time Machine (in switch mode + providing a WiFi access point second across the House), over a gigabit 8 ports switch with the Virgin cable router. In no case a network complicated and so far I've had NO problems with the internal network - before the addition of ATV4 we had several wired (Macs, PS4, PS3, Smart TV, home automation) and wireless (ATV3, Blu - ray, another PS3, MacBook, iPads, iPhones, etc.) ANY abnormal behavior of customers well. But still the problem persisted. I had to leave the investigation, but left the ATV on and connected via ethernet.

  Now, here's the next interesting issue. My son said that it could not connect to the WiFI network with his iPhone 6. The phone would see the ads these two WiFi networks, but on the selection or just would not get an address never (even with reboots, restorations, etc.), to the point where he thought the phone had a problem with the hardware (also proposed by the Apple Support). Other devices seemed (at this time) to connect OK, even more reboots to network equipment does not solve this problem. So iPad (already OK) my wife had the same symptoms. A little Google and look on this site of the updated support various complaints about the networks ATV4, slow speeds, etc. - and including an addition can cause the ATV4 hitting on questions to other devices that you try to use the same network. So I turned off the ATV4 and ' hey presto' the phone that don't would not connect worked immediately, iPad & other devices connect and can access the internet + LAN in quick as they did previously.

  Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

  That's all very boring, because I also bought a second ATV4 as a Christmas gift for one of my sons. Is it really £300 + in the sewers?

  The other people in this community, see some or all of these questions? Permanently or intermittently? Has anyone received all responses support who can help me? I will of course follow up with Apple myself.

  Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

  That's right, that is not a problem for the vast majority of users, in fact I'll go far as to say that I only saw one or two messages with 'Similar' issues. May I suggest you try in another place (maybe a friends or preferably to an Apple store), I'm inclined to think you will find it works perfectly, if it isn't taking it back for a replacement.

• Networking question in VMware Workstation / nested ESXi network configuration problem

  Hi guys,.

  I am trying to set up a virtual lab, I setup a domain, a vcenter server and up to 1 ESXi host controller.

  I am really struggling with the network aspect in establishing a vmnic for storing shared, please see the attached screenshots and a few questions:

  1. Is a vmnic a real network map? or vmnic correspond to "network adapters" that you put in place since the setting of your virtual machine?

  I followed a tutorial and implement 3 NICs on the ESXi host, in Bridge mode, I tried this in my configuration of vmworkstation and I lose the connection to my server vcenter to the ESXi host.

  See screenshot attached to how I configured my ESXi host, screenshot is called 'screenshot2esxihost network', I run got each of the maps defined on NAT network.

  

  See also the screenshot of how I have my configuration of network settings in my VMWare Workstation, screenshot is called "screenshot1. the tutorial does not show how it has its editor of the virtual network configuration, but it puts its ESXi host NICs in BRIDGED mode, and I'm guessing that you can set this time within the virtual network adapter. If someone could tell me what changes should I make in there and on the network cards in my ESXi host, which would be really useful.

  

  My domain controller, server ESXi hosts and vcenter are currently on the 192.168.86 range, which currently stood at NAT

  See also a screenshot from the vsphere client - I don't see a vmnic "vmnic0", my goal is to be able to add a "vmnic2" for a separate storage network.

  

  any help would be received with gratitude, I VCP510 review at the end of the month and really hope to be able to get my lab setup as soon as possible.

  The vmnic is the rising 'physical' of an ESXi host. So with the 3 network cards that you configured for the host in VMware Workstation you will see under "Network adapters" and you can use them to vSwitches in the section "network".

  André

• Networking question

  Hi all

  We received to install an infrastructure were we will provide services terminal server on the internet for 5 different companies (in the future, maybe more). Each of these companies must work independently.

  We thought deploy vmware vsphere script to accomplish this task.
  Our question is about securing virtual network for each company on the other. We don't want the company to be able to see the shares of company B etc network I guess the only way to achieve this is implementation of VIRTUAL LANs. Is it the thought of right? If Yes, we are a little confused on vsphere for what products can do exactly what we want.
  Is it just this scenario behind a single WAN IP address and router internal NAT, or have a different WAN IP? How does this affect vsphere deployment?
  We want to deploy "vsphere essentials more" in order to provide backup and services HA and it is because it is a small company, we are a little limited to budget.
  We would appreciate it if we had some professional advice about the above scenario

  Thank you

  VLAN might be a solution.

  To implement the router/firewall between VLANS, you can use a virtual appliance (with multiple NICs for) or a real Firewall (most support trunking VLAN or have multiple network cards).

  André

• VMware Workstation 7.1.2 - Linux networking questions

  I am on Windows 7 and I have a Ubuntu 10.10 I can't accept an IP address. I don't know if my question is Ubuntu configurations or VMware. I have a NETWORK adapter that is set to Custom (VMnet7) which I configured with DHCP. My goal was to implement a custom network (VMnet7) so that they can communicate without an external connection. I added Windows clients and receive DHCP addresses without problem. When I add my Ubuntu box, he does not get the IP address. I have the set eth0

  Auto eth0

  iface eth0 inet dhcp

  When I restart the network interface, he seeks an IP address by sending a DHCP request to 255.255.255.255, but never received an answer from, and finally abandoned. This machine has been downloaded from another system and pulled upwards. Any suggestions on the place where to proceed to diagnose the problem?

  -jyxavier

  I have a NETWORK adapter that is set to Custom (VMnet7) which I configured with DHCP. My goal was to implement a custom network (VMnet7) so that they can communicate without an external connection.

  FWIW VMware Desktop products already have defined VMnet1 for host only then why the need to create a host only VMnet7?

  Make sure that the client's network card is verified connected.

  What Linux Distro do you use?

  If the suggestion of sflanders does not then archive and attach the vmware.log for this virtual machine files and join a response message.

• HP 4101mfp Networked, question

  So I have a HP 4101mfp connected to my network and I have a computer that access.  The 4101mfp has the latest firmware (03.804.6) and is connected by LAN line.  The computer that accesses has installed the most recent driver (5.8.0.17508) and I chose the 'network' connection during installation.  It is also connected through the LAN line to the router as the printer.  Everything is fine and I can print when I have to.

  Now I fix usually issues when I see them in the event viewer on Windows 7 and I found a problem that arises.  Red error event ID 7023 who she is "HP network devices support ended with the following error: the specified module could not be found.  So looking at the autorun, I see that miss me a service file:

  HPSLPSVC is the entrance and the file "hpslpsvc64.dll".  I scanned my system and watched in the HP files that are created when you install the drivers; I can't locate this file.  Can someone direct me to where I can get this file?  Maybe it's somewhere in the installation zip files?  Or if anyone knows if the related service publish in case the Viewer is repairable?

  Thank you

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  I hope this helps!

• 8620 printer - fax receiving to questions from a private number

  Help a friend to me.  Recently bought a new JO Pro 8620 AiO

  He had Comcast - internet and phone 2 lines - 1 line is dedicated to... fax number when it receives a fax from a private number (it takes care of most of the schools are set up as private numbers)-he must manually accept the fax on the screen of the printer.  This parameter is missing on the fax configuration or if he chose so that it has more to do this... and that one receives fax anything?

  Hi GBrun,

  The answer you are looking for is "set auto answer."

  The process is mentioned on page 77 of the manual which can be found at http://h10032.www1.hp.com/ctg/Manual/c04204791.pdf

  You can also set the number of rings before answer (page 78).

  1 small question - is actually two different lines of your friend's phone line? or just a line with two phone numbers assigned? If you take a phone while the other is in use and you hear the converstion, it is a line with two phone numbers. If you do not, then it's two separate lines.

  If it's 1 line with two phone numbers, then you will also need to put a special (page 78 again) ringtone - in this way, the machine can recognize what line call and be able to pick up in time.

  Good luck!

  _______________

  I do NOT work for HP

• Send and receive messages question - Outlook

  Original title: saspencer

  Some forwarded messages sent out and go to the Outbox? This happens in Outlook.

  I also receive two duplicate incoming messages? Also, Outlook.

  Hi Steve,.

  Thanks for posting the request in the Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. what version of Outlook are you using?

  If you use Outlook Express, follow these methods to solve the problem:

  Method 1:

  I suggest you to refer to the article and see if it helps:

  Error messages when you send and receive in Outlook and Outlook Express

  http://support.Microsoft.com/kb/813514

  Method 2:

  To resolve the problem with Outlook express, I suggest to refer to the article and try to fix it:

  An Outlook Express basic repair kit

  If the problem is not resolved, please answer and we will be happy to help you.

  Thank you.

• Designjet Z3200 Networking question

  I have 2 identical Z3200ps plotters. It runs like a champ, and the other would be if I could understand this last question... adding to my pc to be able to print over the network. I am able to do the plank drawing through i.p. on web page address, and I can even ping plotter. However, when I go to add through devices and printers... nothing. I tried it from a pc Windows 8 and Windows 7. He research and can't find anything. I replaced the trainer and still no go. I could even send a print of the web page of the tracer. Also sent one when you're connected via USB. Any help would be greatly appreciated.

  Thank you!!

  Don't know how or why, but I came this morning, plugged the network cable in the plotter, initialized, and in some sort the IP config had passed from manual back to DHCP and picked up a new address. I changed the config manual, keeping the new IP address. Decided that I would try once more to add the Tracker on the network. You know, the sonofagun worked. I had activated impression more than 9100 last week, thinking the same thing you Milo. But after I did it, there was no change. Maybe it was just to take the time to update? Who knows... but anyway his work and I appreciate all the help.

• I received a questionable e-mail claiming to be Windows Live Mail team.

  This week I received an email from microsoft windows mail team (* address email is removed from the privacy *) it says: "hotmail has discovered a series of illegal attempts on account of a bad ipLocation and don't close your account, as it has been reported as a spam account. "You are to complete the form below by clicking on the button answer on your page, fill in the correct information and carefully." It was the meesage. The news that I had to fill out was: 1. name, username, password, date of birth and country or territory. I did that because it seemed really authentic. After I sent the form there was a message at the end that says, your account will not be interrupted will continue as usual. Thanks for your attention to this request.

  The next day, I was not able to connect to my e-mail account. I contacted microsoft support team by completing the form on my problem which was, I think someone is using my email. Some of my email contacts received saying: I'm stuck in Cyprus that is why I need their financial help. The title of this message was "Very Urgent". Which was a lie. They come back to me asking to answer questions carefully so that they can identify the account as mine. I tried my best and finally today I received a link to reset my password. I did successfully, but there is a problem that my email is no longer English but Arabic. I can read the mail, but it is difficult to use other options because they are in Arabic. Help, please.

  This may help: in this page. You will need to enter your password to get there, then select English from the list and press enter.

  Noel

• C7280 Fax receive/send Question!

  OK, so I have a very simple question.

  Can my c7280 all-in-one printer receive a fax, in 2 of my color cartridges (yellow & cyan) are empty.

  All other colors are full (black is brand new), but these 2... This will be my c7280, work correctly and print the fax?

  Please someone answer me, because I'm waiting to receive an urgent fax.

  NOTE: I'm asking you this because I saw that when I try to print something in the current state,

  even by selecting "use black cartridge/ink only" optio, the printer won't allow me to print, give me e message,.

  that I need to replace the 2 cartridges first.

  Please, someone help me... thanx in advance.

  Thank you very much for the reply.

  If you see this response... a general question: all printers work this way? and if there is nothing that can work around this?

  (e.g. If I want to print only in black & white & use only the black cartridge side than the color is empty?)

  It is a general & nothing urgent issue... Thanks anyway!

• How can I correct gateway is accessible, but cannot receive network traffic on internet

  I have a Windows 7 laptop. All my drivers are up to date. It happens every 10 to 15 tion.  When problem he pulls it only resets my wifi. Then it will happen again. I reset my router already. I pass the channel for my wifi. I have uninstall the anti-virus software.  I'm stuck here please help.

  How do i fix gateway is accessible but cannot recieve network traffic from internet
  

  Hello

  I appreciate the efforts to try to solve the problem. You might face this problem because corrupt or the network driver. You could also face this problem because of the incompatibility between the IP address. Please write us with the following details.

  1. What is the brand and model of your computer?

  2. You did it all changes to networking prior to this problem?

  3. Do you have an error message when you try to access the Internet using a browser?

  I suggest you follow the steps below.

  Method 1: Run the network troubleshooter utility.

  Click on the link below and run the network troubleshooter utility. Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save you time and effort.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Check the question and proceed to the following method if you are still having problems.

  Method 2: Try resetting the TCP/IP stack.

  Click on the link below and follow the steps as for Windows 7 in the section I would like to fix it myself.

  How to reset TCP/IP using the NetShell utility.

  http://support.Microsoft.com/kb/299357

  You can also follow the steps in the tutorial below. It contains the methods of troubleshooting issues related to the network database.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue and the details asked. We will help you.