E4200 fundamental Question - how do I know what devices are on the network and get their IP?

I went through all the controls on Cisco Connect and router advanced settings and have been unable to know what is connected to the network wireless router and address of IP addresses.  Cisco Connect tells me there are 7 devices with and that's it.

Could someone please point me to a FAQ/Manual explain how to do this?

Thank you very kindly.

go to your router configuration page (http://192.168.1.1), then go to the State, and then LAN sub-tab. Click on the button of the DHCP Client Table.

Tags: Linksys Routers

Similar Questions

  • How can I see what devices are files on network sharing domestic?

    I have a ps3 & Xbox which can share files stored on my pc but I can't seem to find what/how you would you find... ? I am a novice, so go easy on me!  :-/

    Hi Adybboy,

    Follow these steps:

    (a) go to the Control Panel, then network connection.

    (b) click the my network place.

    (c) view of computer network device.

    There you can see what is installed.

  • IPhone 6 - How will I know what apps are underway in the background?

    IPhone 6 - How will I know what apps are underway in the background?

    On multitasking on your iPhone, iPad and iPod touch - Apple Support

    Scroll to the bottom where he treats background App update!

    You can visit these settings under settings > general > background App update.

  • How do I know what software is causing the error to Windows Installer: lack of program

    original title: How do I know what software is causing the error to Windows Installer

    Windows XP

    When you get this message that keeps popping up every two hours-

    The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded

    may be missing or the upgrade patch may update a different bersion of the program.   Make sure that the program

    to be upgraded exists on your computer and that you have the good patch upgrade. ."

    How do find you the application or software, or the program is causing the problem.  ?

    It is a simple solution.

    Go in run, type: msiexec /Unregister 'press the ok button.

    Back to run, enter: msiexec/regserver "press ok.

    Youre thru. Restart the pc

  • How do I know what programs are safe stop execution or remove it from the startup of Windows 7?

    How do I know what programs are safe stop execution or remove it from the startup of Windows 7?

    original title: start up programs?

    Hello

    You can use these to control which startup programs. Many others settle
    start-up haven't really needed to be there. Such as Acrobat Reader (Adobe), WinAmp
    Agent and many others who are responsible for pieces of themselves to get started more quickly (not a problem
    on the machines of today ' hui) and of course they can control the files they support (to be
    course you continue to use only). Those who are only common examples and didn't want to not say
    as a slam on these programs very well.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929135

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    Autoruns - free - see what programs are configured so that it starts automatically when your
    system boots and you log in. Autoruns is also the full list of registry and files
    locations where applications can configure start automatic settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    -------------------------------------------------------------------------

    Performance and maintenance tips
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/welcome-to-the-performance-and-maintenance-Forum/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

    I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

    Hi Philofduluth and thanks for posting.

    There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.

    If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.

    I hope this helps. Let us know if you have any questions.

    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

    My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

    Time Machine backup to a sparsebundle.

    The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

    Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

    You has of course set the exclusion in Time Machine?

    By default, Time Machine will exclude your second drive unless you have included it. Did you?

    Once you get to this level during the backup, you can do a full restore manually whenever you want.

  • How can I make my PC OS meets the requirements and get windows vista to be taken in charge for the installation of adobe lightroom 6?

    How can I make my PC OS meets the requirements and get windows vista to be taken in charge for the installation of adobe lightroom 6?

    Well, I'm not really sure of Windows Vista.

    You can contact customer service for additional troubleshooting.

  • How can I know what these mysterious "bought" the audio files are in my list of music songs?

    Hello

    It is strange - never, I remember buying these songs that appear on my list of music songs. (I click 'genre' of the bar of the high sorting option and see a bunch of "purchased AAC audio file" s).

    How could they got there?

    How will I know if they are free or not free files, I can be charged for without my awareness?

    How can I configure iTunes to never make purchases for me without my permission explicit, free or not?

    Please answer these questions, I appreciate it!

    iTunes cannot make purchases without your approval.

    The list of your purchases and free downloads is available in iTunes Info section account. Below you will find instructions on how to get there.

    See your purchase history in iTunes on Mac or PC - Apple Support store

  • How do I know what RAID controller works the box?

    Using the VMware Compatibility Guide, how do I know what RAID controller works out of the box (no installation necessary driver, no action necessary special) for 5.5 ESXi update 2?

    PS - I initially assumed that if they appear then they work OOB, but there is nothing on the page registration or landing pages of the device that makes this clear.

    Once you click the RAID controller in the HCL, you will see all the supported versions of ESXi with the appropriate driver listed as "inbox" or async". There may be more driver for a specific version, but if one of them is stated as "inbox", it is supposed to work out of the box.

    André

  • How do you know what screw are running?

    When I stop my Main.vi all the subVIs should be stopped. But when I go to close my project, it says some screws are still running? How I know which screws are running? Where can I get a list of these?


  • How can I know what anti virus do I have and where can I find it

    theres nothing on my desk so I don't know what I have and I want to turn it off for 10 minutes. Windows xp

    Have you actually installed an antivirus application?

    Look at the system of Notification area (next to the time display).  Place the cursor of the mouse on each of the icons (make sure to click the chevron pointing to the left if it is present to display all icons).  Each icon should have a pop up balloon, explaining that it is.

    If one of the icons associated with your antivirus application, right-click and you should get a menu that includes an option to turn it off temporarily.  If a right click does not work, [to the left] double click it.

    If none of the icons seem to be an antivirus application, follow these steps:

    1. open a command prompt window (start > run > cmd > OK)
    2. type the following lines in the black command prompt window and press ENTER after each line

    Tasklist/SVC > '% userprofile%\Desktop\MyTasks.txt '.
    output

    3. go to your desktop, then double-click on the MyTasks.txt file
    4 copy the contents of the MyTasks.txt and paste into your answer here

    You can remove MyTasks.txt after you copy and paste its content in your response.

  • How do I know what version of driver for NETWORK card I use

    How do I know which driver to map NETWORK HP that I use on my DL380 running ESXi 6.0?

    Login ESXi and run below command

    1. # esxcli network nic list
    2. Run it ethtool -i command to display the available information for one of the network interfaces, by specifying its name from step 1

      # ethtool -i VMNic_name

      For example:

      # ethtool -i vmnic0

      driver: ACME
      version: 1.2.3a-1vmw
      firmware-version: 7.8.9
      bus-info: 0000:02:04.00

    -If you find this or any other answer useful please check the answer correct or useful.

  • How do I know what programs running in the background?

    Original title:

    programs

    How can I find out if there are programs that run in the background on my windows 7, and how can I get rid of them?

    Go to: http://cmdrkeene.com/fix-sluggish-slow-pc to see how to find the programs that run in the background and how to disable them.

  • How can I see what devices are "authorized" computers

    Is the iPad and iPhone connected by a common appleID included automatically?

    How can I see what other devices are 'allowed' and could be deleted, for example, a computer has been replaced and the device wasn't "deauthorized" before you replace and may not be available.

    1 iOS devices do not use the iTunes Store authorizations.

    2. a list is not available at your end. If you are off permissions, click here for more information.

    (140367)

Maybe you are looking for

  • Need help regarding updated

    I use Macbook air and I get a notification to update my OS. What I do need to update or weather, even if I'm not updating... Need suggestion Thank you

  • A pencil of Apple can be used on the two iPad Pro - a large and small - without having to plug on the iPad?

    A pencil of Apple can be used with two iPad Pros - a big and small - without having to plug into each iPad before each use? The same pencil, Apple will be able to come and go between two iPad Pros?

  • A520 forget date

    My A520 has lost his mind or get Alzheimer's disease. Whenever I have it turn on now I have to tell him the date.

  • How to defragment the registry for XP?

    I know it's a stupid question, but I tried to get System Mechanic to defragment and compact the registry on reboot, and I look at the process on the blue screen all tasks end with «... ignored» description

  • Which version of the AIR SDK to use for BB10

    Hello I recently moved my dev to a new Mac environment, so I had to reinstall everything, I installed the BB 3.0 sdk and robbed the air sdk 3, 4, I can compile an application, I've migrated any signature and debug tokens (which is good, cards app are