How can I know what anti virus do I have and where can I find it

Similar Questions

• E4200 fundamental Question - how do I know what devices are on the network and get their IP?

  I went through all the controls on Cisco Connect and router advanced settings and have been unable to know what is connected to the network wireless router and address of IP addresses.  Cisco Connect tells me there are 7 devices with and that's it.

  Could someone please point me to a FAQ/Manual explain how to do this?

  Thank you very kindly.

  go to your router configuration page (http://192.168.1.1), then go to the State, and then LAN sub-tab. Click on the button of the DHCP Client Table.

• Firewall action center not on what anti-virus poster application on and I'm unable to either turn on or off

  On the new computer, I installed Kaspersky... no errors.  Open Kaspersky firewall information.  Firewall Windows with advanced security on local computer says Windows Firewall on... and says that "these settings are managed by application of the Kaspersky Internet Security vendor.

  BUT the center of the Action is marked and when open safe says (important) network firewall Windows firewall and Kaspersky Internet Security are both disabled

  When I opened to see firewalls and either go to activate the windows firewall or Kaspersky... nothing to reset... I can't fix...

  Help, please

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Action-Center-doesn

  This thing should be treated by http://forum.kaspersky.com/

  http://Forum.Kaspersky.com/index.php?showtopic=284448
  http://Forum.Kaspersky.com/index.php?showtopic=181294

• How can I find what I need at startup of the computer programs, I went to the System Configuration, but do not know what to uncheck to stop running when the computer is started

  I ran a report on my computer, in case of problems.  It detected that I needed to verify in the Configuration of the system on the programs that were running at the start of the computer.  I have several here I will list who is here, and maybe someone can tell me that I don't need at start-up.

  1 Microsoft Security by Microsoft

  2 updater Java (TM) Platform SE Auto by Sun Microsystems

  3 Localnet Express 3.0 - propel Software Corp. (Localnet is my provider and this express is supposed to help my computer go to websites faster)

  4 Roc_Roc_NT_unknown-AVG safe search (I was told I didn't need AVG antivirus, so I deleted it out)

  5. default manager by Microsoft

  6 adobe Acrobat from Adobe Systems

  7 adobe Reader by Adobe Systems

  8 AVG Tray-unknown

  I hope someone can help me with this takes 15 min for a loading site approx. 30 to load the game after I finally get it, then the game is frozen and won't do anything.  Even for all other sites, I'm at my wits end and don't know what to do.  I have dial up and Windows 7.  Just started having problems after getting this new service provider.

  Hello Wanda.

  One command, but lets see what we can do to whittle the list down. First, dial-up internet connection is slow, so keep that in mind that we work here.

  Second, almost all your startup programs are valid and advised to load at startup of Windows. Some possible changes:

  (1) If you need not a specific to Java, such as might have the game that you are trying to play, so you don't need to have it is launched at startup.

  (2) regarding the Adobe programs, why do you have Acrobat on your computer? Do you need to create PDF files? Adobe Reader which has many freeware alternatives that are faster, used to read PDF files. So if you need only to read PDF files, you can stop Acrobat from loading at startup.

  (3) other startup programs are all legitimate. And remember, just because you do not start a program at startup, does not mean that you cannot start later if you find that you don't need it.

  (4) the problems you encounter to "all sites that you visit" could be a function of malware. You don't have AVG Antivirus running on your computer just? I recommend do you a scan in depth and then put in quarantine and remove any infections it finds.

  (5) after you run the virus scan, I suggest that you try to download and run these two scanners. First MalwareBytes' Antimalware, here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html.  Secondly, SUPERAntiSpyware, here: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html. Quarantine and remove all infections they find.

  (6) after doing this, restart your computer and see how it works. Please post your results here, and if you have any questions during this process, post here and I'll help you. Let me know how you fare.

  Kind regards

  BearPup

• Can you tell me how do I know what I should delete to get as much space in a minimum of time?

  Original title: my disk space is so small that I can't do anything.  Can you tell me how do I know what I should delete to get as much space in a minimum of time?

  Not enough disk space

  Hello

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  You may want to transfer some data, images or documents on removable media like USB keys,
  External USB (my choice) or even CD/DVD readers (make multiple copies if the use of these).

  -----------------------------------------------------

  Info:

  System restore usually holds 15% of disk space and updates that are necessary for running computer
  consume even more. Backup - Options of recovery and even MS updates and those of HP, Dell
  or similar manufacturers use the space if your charging system. There are also overhead for the readers are not
  format to their maximum capacity.

  Where all my disk space? (Vista) - good writeup
  http://Forum.NotebookReview.com/showthread.php?t=167983

  Hard disk space Vista shrinking and reducing anomaly
  http://www.mydigitallife.info/2007/07/04/Vista-hard-disk-space-shrinking-and-reducing-anomaly/

  ----------------------------------------------

  It will show you how disk space is being used.

  WinDirStat - free - use to make sure you know what is too much space.
  http://WinDirStat.info/

  -Free - TreeSize tells you where precious space has gone to
  http://www.Jam-software.com/treesize_free/

  Also run Disk Cleanup:

  Start - All Programs - Accessories - System Tools - Disk Cleanup.

  Use the WinDirStat or TreeSize and these other tools.

  DiskMon - free - an application that logs and displays all the activity of the hard disk on a Windows System.
  You can also reduce DiskMon in your system tray, where it acts as a disk light, presenting a green
  icon when there is disk-read activity and a red icon when there is a writing activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896646.aspx

  Process Monitor - free - a monitoring tool for Windows that shows real-time file system,
  The process/thread activity and the register.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  Manage - free - a utility that displays information about the handles opened for any process in the system.
  You can use it to see the programs that have an open folder, or to see the types of objects and the names of all
  the handles of a program.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896655.aspx

  -Free - Process Explorer shows you information about the handles and DLLs processes have
  opened or loaded.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Sysinternals - many free tools
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  ---------------------------------

  OpenedFilesView - Free displays the list of all the open files on your system. For each file opened,
  additional information is displayed: handle value, read/write/delete access, position in the file, the
  process that has the file open and more...
  http://www.NirSoft.NET/utils/opened_files_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my C drive is full, how do I know what programs can I remove?

  I know that you can remove some programs, but how do I know what ones I can remove without affecting my computer?

  I know that you can remove some programs, but how do I know what ones I can remove without affecting my computer?

  We cannot comment on what programs you need to remove. In addition, some programs running in the background and removing will raise questions.

  However, you can uninstall programs that have been installed by you. You can go to start-> programs and features-> press enter type. Search for programs that have been installed by you, select them and click on uninstall, individually.
  Once uninstalled, you can install another drive as the installation location.
  But, before you uninstall, go on-> do work right click on the C partition :\-> click Properties. In the Properties dialog box, click Disk Cleanup. In the Disk Cleanup dialog box, click clean up system files. And then click Ok. This will clean the junk files.

• How do I know what the maximum number of agents I can put on a hyperic serv

  How do I know what the maximum number of agents I can put on a hyperic server. ?? IM using the built in database on a linux unbuntu 4 cpu system ' s2592 MHZ. 7GB of Ram. I assumed that the
  disk space can be the most important question? Any suggestions or any help to determine when to stop adding customers would be useful. We can use open source, but are also
  talk about the EE version. The Hyperic server type would make a difference in space etc.?

  Disk i/o is probably a bit more critical than the disk space that the DB generally is not larger than 10-15 concerts.

  Ability wise, your system is CPU/RAM.  Disk i/o will probably be your main bottleneck and the thing that will determine the maximum number of agents that can have on the server.

  Splitting of the DB from the HQ server would certainly help in the perspective of General load.  Definitely put the DB a system with several piles of discs (part of a San, fast raid) will help you in the disk i/o.

  If I was trying to answer the same question, I guess that I look at the Scriptures on disk on the DB as starting point, test the drive with systat/iostat or something to see what the drive is capable of in terms of read/write speeds and also look at postgres for slow queries, duration of execution of query, used memory and cpu.  Naturally, I would do the majority of "look at her" go to HQ itself :)

  Post edited by: ama

• It keeps telling me that im running a system that the program can't, how do I know what needs to be changed and how to change?

  How can I find out which system is not supported and how can I change it? It is not expanding on the issue at all

  Hello

  This refers to the OS you're on.

  If you try to install the creative cloud and you get this message, it means that the version of the operating system is not more supported by the software.

  You can also check the system requirements for the creative cloud or any other specific System application requirements. Cloud Creative

  I hope that answers your query!

  In order to upgrade your OS: -.

  For MAC - contact Apple

  For Windows - contact Microsoft

• How can I find out what startup files

  Number of files is loaded on startup because the entries in the RUN keys in the registry editor.

  Most of them is probably necessary, but I would like to know what they're doing so that I can decide if I accept them there.

  How can I find out what files do, especially files from Microsoft to start? Looking for file names always seems to give a vague result and an exhortation to try a magic registry repair program.

  Number of files is loaded on startup because the entries in the RUN keys in the registry editor.

  Most of them is probably necessary, but I would like to know what they're doing so that I can decide if I accept them there.

  How can I find out what files do, especially files from Microsoft to start? Looking for file names always seems to give a vague result and an exhortation to try a magic registry repair program.

  Here is an article on startup programs/applications. It might give you a better understanding of the subject.
  http://www.SysInfo.org/StartupList.php

  Excerpt:

  Key to 'status ':

  "Y" - normally leave to run at startup

  "N" - not required or not recommended - generally used that rarely tasks that can be run manually if necessary

  'U' - user choice - depends whether a user considers necessary

  'X' - definitely not required - typically viruses, spyware, adware, and "resource hogs".

  « ? » -Unknown

  I am not qualified to make recommendations of any kind.

• How can I find out what programs are essential to start?

  Original title: slow start

  How can I find out what programs are essential in the implementation, we can stop?

  Windows Home vista 32 premium

  Hey Stella-50,

  How slow is slow? For example, my machine (e-machine E4264 2.2 ghz with 2 GB RAM) boots in 95 seconds. For me, I call it, in the average. I am currently in the process of looking for a new machine because it is already 3 years old, so maybe that OEN will be slightly faster to start.

  What you can 'turn off' will depend on which in fact initially launches upward and, unfortunately, you have not told us that at this moment. Is that you should not disable your anti software anti-virus (updater). nothing to do with your mouse and your keyboard etc.

  Perhaps, if you made a list of what application are actually being run at startup (via the msconfig Startup tab) can someone take a look at them and see if, or what can be disabled.

  Otherwise, you might take a glance at Startup Delayer http://www.r2.com.au/software.php?page=2&show=startdelay to see if you can delay the time different applications load to allow windows to start up more quickly. I haven't used so I can't say how good/bad it is.  It's a freeware.

  Here is a review of PCWorld magazine http://www.pcworld.com/downloads/file/fid, 73002-order, 6 pages, 1/description.html

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• New iPod touch - how do I know what generation is it?

  I just bought an iPod touch 32 GB new (color gold) and want to know what generation it is before ordering an online deal.  How can I find out the generation?  No model or serial number apparently...

  Click here and look it up.

  (142757)

• IPhone 6 - How will I know what apps are underway in the background?

  IPhone 6 - How will I know what apps are underway in the background?

  On multitasking on your iPhone, iPad and iPod touch - Apple Support

  Scroll to the bottom where he treats background App update!

  You can visit these settings under settings > general > background App update.

• How can I determine what version of Firefox that I and where do I go to for updates.

  Yahoo 'suggests' switch to Firefox 8. How do I know what version I have currently (there not 'Internet Options' under Tools) and where I go to find the updates down according to Yahoo?

  Help > about Firefox = the version number is there.

  In addition, you can type Subject: support in the Bat location and press ENTER, to get more information about your installation of Firefox.

• How can I find out what files on my drive D: (recovery) are those who are critical and which are not?

  I have a desktop computer with the Windows Vista operating system a1720n Pavilion. PC health tells me he is too little space left on my D: drive for optimal operation. He tells me to remove non-critical files; But how do I know what files are critical and which ones can I delete or move to the bigger drive C:. Or can I somehow expand the D: drive without messing things upwards? Norman

  Hi Norman,

  Please see the document on this subject at the link below.

  http://support.HP.com/us-en/document/c01508532

  Kind regards

  DP - K

• How do I know what nvidia driver I need?

  Original title; Im having a problem with the nvidia drivers it says file is missing, but does not say that one. is there a way to know which file is missing?

  I have nvidia installed 258.96 works without a problem, when I try to upgrade to 286.96 it errors out says not installed or missing file. I was online with flat tech starts me in SafeMode w / networking. same result. error. missing file. so, how can I find which file or registry needs setting changed? y at - there a command I can do to make it work? /f  . I am not a technician but I can navigate my computer good enough so any help would be appreciated

  Hi, Cboardwoman,

  You posted in the Microsoft answers Feedback forum.  Post your question in Windows hardware and drivers Forum found by clicking this link.

  http://answers.Microsoft.com/en-us/Windows/Forum/hardware

  Always include your Windows - nvidia 258.96 - Windows XP operating system

  NVIDIA 286.96 - what is it?  A Windows 7 driver?

  http://www.nvidia.com/object/WinXP-258.96-WHQL-driver.html

  Click Start, run and enter in the box:
  Msinfo32
  Click OK

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information.

  Erase the information, system or user personal name... you can copy before you post

  You can search here for the nvidea drivers - read the instructions, and then click the DRIVERS GRAPHICS button to start the scan.

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Top 5 ways to find missing drivers

  http://driverwizard.org/articles/locate-missing-drivers/