There is a duplicate network name

Similar Questions

• HP Pavilion M4-1002TX: network name not displayed in my HP pavilion m4-1002TX

  Hi you

  Really need your help. My lappy since there are 2 weeks unable to connect on behalf of the office network. The name of the network is invisible. Connection are available but not connected. I tried all the HP PC, troubleshooting wireless network and internet in vain.

  I have no idea right now. Some laptop HP with the same model at the office have a same problem.

  Other network name are appear in the list & also can direct connect using the usb cable.

  Please help me.

  OK after the reset of the modem the network name does not always show upward?

• Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

  Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

  Hi Sumit and thanks for posting.

  Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

  Start, run, CMD, OK to open a command prompt:

  Type the following command:

  IPCONFIG/ALL

  [Note that there is no space between the oblique and ALL bar].

  Right click in the command window and choose Select all, and then press ENTER.
  Paste the results in a message here.

  I hope this helps. After the back if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Laptop WiFi problem, «identifying...» (network name) ».

  Hello
  I'm having a problem with the wireless on my laptop. Its a HP Pavilion dv6000 and just under a year of age. I had no problems with the wireless until recently. I use the laptop at home and usually the internet is very well (apart from the occasional disconnection), but when I'm at school do frequently connect to the school network (I am a student of the University, and there are several routers throughout the school and in the many buildings). Sometimes it will connect in one building and I'll switch to another and it does not connect. Each time, he does not connect it always says "identifier...". (wireless network name) ». No amount of repair, restart or reset the network card it won't connect. The strange thing is that sometimes it connects to the router in this building (i.e. library) and sometimes it won't. Whenever I have check the status shows that the laptop is received but does not send do not.

  Help! This problem is really starting to annoy me and I don't want to end up throwing my laptop on the whole of the library.

  Hello

  1st brand one Restore Point so that you can return back if necessary (it shouldn't be though).

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  --------------------------------------------------------------------------

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Do another restore Point then you can go back to where you were if necessary with new active pilots.

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  I would like to delete ALL networks, so you can restore if necessary.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• change the network name on my wireless router?

  A few months ago, I bought my linksys router and did the installation of all the stuff that day, including changing the name of the default network. I want to change the name to something different, but when I went to the address of the facility, there was no box to put the new network name [I was on standard wireless settings tab in the wireless section]. Help please?

  [Yay that worked, thank you:]

• How to remove or delete profiles redundant network (names) of my office and laptops running Windows 7?

  With Verizon DSL modem in bridge and as a router Linksys WRT 160N, my desktop and laptop computers have been in a network.  Laptop computer and printer via wireless and desktop wired.  The name of the network used to be the same for all connected devices.  However, when my Linksys gave the soul about a week ago, I reconnected it via the Verizon Actiontec WRT704G modem/router combination and since I could not print from the laptop, and it takes about 5 minutes to print 2 pages of my office.  The network name on my desktop by default automatically to the network 4, and on the laptop, there '2' after the former name of network.  With different network names, I couldn't set up my home group.  But I have access to the internet on both computers.  The network name (SSID) on the site config the router and the printer is the same: the former name of the network without the '2'.

  I need help or advice on how to clear or remove these other network names and have just 1 network name for all connected devices.  I know that in Vista, you can merge or remove network profiles but can't seem to find a way to do this under Windows 7.  Also, my laptop is Windows 7 Home Premium 32 bit and the Office on Home Premiun 64 bit.

  Thank you
  Pejuson

  Hi pejuson,

  To remove profiles redundant network from your computer, you can follow the steps mentioned below and check.

  1. open manage wireless networks by clicking the Start button, then Control Panel. In the search box, type Wireless, and then click manage wireless networks.

  2 right-click the network profile you want to change, and then click on Properties.

  3 make the desired changes, then click on OK.

  For more information, see create or modify network profiles.

  Hope this information helps you.

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sync Center stops the error: the specified network name is no longer available

  Original title: stops Sync Center sync every time there is an error?

  The error is still "the specified network name is no longer available." Sync stopped with offline files. So I hit ignore and restart the synchronization. This happens about every minute during synchronization. I'd rather just complete synchronization what it can that stop all the time and I have to restart manually. Anyone knows any solution or what does the error message mean?

  I had a similar error.  This seems to be a function of the indexing of offline files when you synchronize a large number of files.  By temporarily disabling indexing of offline files, you can synchronize all your files and then re - activate the indexing.

  To disable indexing, clear the checkbox 'offline files' under control panel > Indexing Options.  Then synchronize as usual and re - activate when you are finished.

  I hope this helps.

  Original title: stops Sync Center sync every time there is an error?

  The error is still "the specified network name is no longer available." Sync stopped with offline files. So I hit ignore and restart the synchronization. This happens about every minute during synchronization. I'd rather just complete synchronization what it can that stop all the time and I have to restart manually. Anyone knows any solution or what does the error message mean?

• How to find my network name and address

  I'm trying to set up the fax send and receive on windows 7 and I have born my network name and address to enter when prompted. I spent all day searching the Internet for help and it is impossible to find. Help, please.!

  Hi Chiquitita,
  
  Your computer is connected to a domain network?
   
  If your computer is connected to the domain network, you need to contact the system administrator to know the network address of the fax server.

  I suggest you refer to the following article for detailed instructions to set up the fax.
  Configure your computer to send and receive faxes

  http://Windows.Microsoft.com/en-pH/Windows7/set-up-your-computer-to-send-and-receive-faxes

  To find your network name or the SSID:
  Type the IP address of the router in your browser, go to wireless settings and check the SSID there.

  I hope this helps!

• How to find my network name?

  original title: Internet

  One of my friends came from China and she brought a laptop with it. When she arrived home, she could not connect to the Internet even if my PC can. When we looked in wireless connections, it did not show the name of our network. I have to ask how I can find it.

  It depends on if the router assigns to hide my SSID or wireless network name.

  You must Access the router interface or GUI and find the wireless settings, and then view the name of the wireless network.

  If you have hidden then you should keep the name of your wireless network, as others prefer to hide the name so no one else will be able to see and connect to.

  You must also consider your WEP or password make sure that you have it.

  you know your IP of the gateway?

  Let's find out who. Press the windows from the keyboard, and then press R in total.

  There type cmd and press ENTER.

  type at the command prompt.

  ipconfig

  Send us the details here or just look for the default gateway and get back to us.

  from there, we will be able to access the router page I hope that the username and password which is always enabled by default, which is the user name: admin password is password or admin.

  * your ISP can help you get the router as well.

  Thank you

  Makoi

• [4.0.1] bug in Data Import: ORA-00957: duplicate column name

  I found a serious problem in the import feature in 4.0.1 data as well as in the old version 3.2. It generates an INSERT script with duplicate column names, so that I can't use this feature at all. This is very critical for me. I don't see that I did anything wrong. It does not appear that the DB table columns are optional or required, or if I have NULL data in the file to import the required columns or not important.

  Here is a stripped down test cases:

  CREATE TABLE IMPORT_DATA

  (

  ACCOUNT VARCHAR2 (25 BYTES),

  NUMBER AMOUNT (30.3).

  CUSTOMER VARCHAR2 (25 BYTES)

  COST_CENTER VARCHAR2 (25 BYTES),

  DESCRIPTION VARCHAR2 (255 BYTES),

  THE PERIOD NUMBER (15),

  NUMBER OF AWARDS (30.8).

  PROJECT VARCHAR2 (25 BYTES)

  ID_RESSOURCE VARCHAR2 (25 BYTES),

  TOTAL_HRS COMP (30.8).

  TRANS_ID COMP (30.3).

  VERSION VARCHAR2 (25 BYTES),

  NUMBER OF VOLUME_FLAG (15),

  WORKORDER VARCHAR2 (25 BYTES)

  );

  There are examples of input data with a single line (Excel CSV/separator with ";" as separator). It doesn't matter that I have import this as CSV/delimited or as original XLSX file, the error still occurs.

  COST_CENTER; PROJECT; ID_RESSOURCE; WORKORDER; VERSION; ACCOUNT; VOLUME_FLAG; TOTAL_HOURS; PRICE; AMOUNT; PERIOD_FROM; PERIOD_TO; DESCRIPTION; TRANS_ID; CUSTOMER

  Z4; D425Z4; RC 8901; 0; 0; 0; 0.00; 201004; 201004; TestData; -118; Z4

  The import script generated is:

  SET DEFINE OFF

  -As line 1 non been einfügen

  -ORA-00957 double column name:

  Line - 1

  INSERT INTO IMPORT_DATA (COST_CENTER, PROJECT, id_ressource, WORKORDER, VERSION, ACCOUNT, VOLUME_FLAG, ACCOUNT, PRICE, QUANTITY, ACCOUNT, ACCOUNT, DESCRIPTION, TRANS_ID, CUSTOMER) VALUES ("Z4", "D425Z4", ",", "RC", '8901' 0,0 '0', 0.0, 0.0, '201004', '201004', "Testdata",-118.0, "Z4");

  and as you can see, it has the column AMOUNT several times.

  Help!

  Concerning

  Peter

  What you have on the step 3 of 5 of the wizard when you set the columns?

  It seems you have more values on your input string you have columns of your table.

• List of all VM network name and IP address

  I am trying to get my head around powerCLI.

  I want to create a script that will the virtual machines on a cluster of output and display their network name and IP address.

  I have this so far.

  (get - vm). %{
  $vm = $_
  echo $vm.name.
  $vm. Guest.Nics | %{
  $vminfo = $_
  echo $vminfo.NetworkName $vminfo. IP $vminfo. MacAddress
  echo '; ' n ';
  }
  } | Export-Csv C:\vm_nic_report.csv

  I'd love to be able to limit the output on the cluster baised, but I can't understand this.

  If I run it without the Export-CSV, I see the info that I need on the screen, but if I add the Export.csv, my CSV is a colum with a bunch of numbers and no real value.

  Hello, TdisalvoOrinoco-

  If you want to limit the output to virtual machines that reside in a specific cluster, you can just start the whole expression with a Get-Cluster and then direct to the Get - VM with which you start currently (or use the - rental on Get - VM parameter).  Thus, the first line would be one of:

  &{Get-VM -Location (Get-Cluster myCluster0) | %{    $thisVm = $_    ## a hashtable for holding properties to be returned    $hshNicInfo = @{}; $hshNicInfo["VMName"] = $thisVm.Name    ## for each NIC, build some info with MACAddr, IPInfo, and Network Name    $thisVm.Guest.Nics | % -Begin {$i = 0} -Process {        $oThisNicInfo = $_    ## the current NicInfo item        ## get the IP info (IPv4 and IPv6 if there, which should be available if VMware Tools are running)        $strIPInfo = ($oThisNicInfo.IpAddress | sort) -join "/"        ## add the NicInfo items to the hashtable for later use with New-Object        $hshNicInfo["Nic${i}MACAddr"] = $oThisNicInfo.MacAddress        $hshNicInfo["Nic${i}IPInfo"] = $strIPInfo        ## this does not seem to have the network name if the portgroup is on a distributed vSwitch, so changed to the line after it        #$hshNicInfo["Nic${i}NetName"] = $oThisNicInfo.NetworkName        $hshNicInfo["Nic${i}NetName"] = ($thisVm.NetworkAdapters | ?{$_.MacAddress -eq $oThisNicInfo.MacAddress}).NetworkName        $i++    } ## end foreach-object
  
      ## once the hashtable is populated for all NICs, create a new object with the info    New-Object -TypeName PSObject -Property $hshNicInfo} ## end foreach-object## sorting goodness from LucD (of course) at http://communities.vmware.com/message/1769991#1769991} | sort -Property {(Get-Member -InputObject $_ -Name "Nic*").Count} -Descending | Select VMName,Nic* | `    Export-Csv -NoTypeInformation -UseCulture C:\temp\vm_nic_report.csv
  

  This is similar to the script posted in the thread http://communities.vmware.com/message/1848022#1848022 (which post has a bit more info on the necessary sorting for good performance, but also another way to recover data, using Get - views).

  In any case, it is a little more that you might write to debut with PowerCLI, but that he gets the output you're looking?

  Message edited by mattboren on February 15, 2013: change the part that gets the name of the network, such as TdisalvoOrinoco noted that VMs on vSwitches distributed has not been populated NetworkName

• Duplicate file names

  Hi all

  Please find below script.

  I'm trying to stop duplicate files names. So if there is a file the same name that trying one already uploaded in the database it flexes up as an error and does not address the upload script.

  I thought him below would work, but seems not at all, data and photos fine upoads is displayed in the database, but if I try deliberately to upload a file I lknow already exists, it overwrites the existing file.

  Any thoughts?

  Tom

  If ((isset($_POST["MM_insert"])) & & ($_POST ["MM_insert"] == "form1")) {}

  $insertSQL = sprintf ("INSERT INTO modern (imageTitle, imageID, imageName, imageDescription) VALUES (%s, %s, %s, %s)',

  GetSQLValueString ($_POST ['imageID'], "int").

  GetSQLValueString ($_FILES ['imageName'] ['name'], "text").

  GetSQLValueString ($_POST ['imageTitle'], "text").

  GetSQLValueString ($_POST ['imageDescription'], "text"));

  @mysql_select_db ($database_connJohnnash, $connJohnnash);

  $Result1 = mysql_query ($insertSQL, $connJohnnash);

  If (! $Result1 & & mysql_errno() == 1062) {}

  $error ["imageName"] = "< strong > '. $_FILES ["imageName"] ["name"]. ".jpg < facilities > is already in use and cannot be overwritten. Please rename the image, and then try again. " ;

  } elseif (mysql_error()) {}

  $error ["dbError'] = ' sorry, there was a problem with the database. Please try again later.';

  } else {}

  Image download

  Set the maximum size of download in bytes

  $max = 250000;

  
  

  set the path to download the file

  $destination = '... / Modern-images /';

  require_once('.. / Ps2/Upload.php');

  try {}

  $upload = new Ps2_Upload ($destination);

  $upload-> move();

  $result = $upload-> getMessages();

  } catch (Exception $e) {}

  echo $e-> getMessage();

  }

  End Image Upload - starts to process the rest of the form

  $insertGoTo = "view - modern.php."

  If (isset {}

  $insertGoTo. = (strpos ($insertGoTo, '?'))? « & » : « ? » ;

  $insertGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $insertGoTo));

  }

  }

  Post edited by: sellador315

  What is the primary key of the table 'modern '? "ImageName" has a unique index?

• Change network name

  When I change the name of the network should I reconfigure all printers on the network?

  Potentially, Yes. If your printers are wireless, then you will need to reconfigure with new wireless network name to connect.

• How to change network name on Time Capsule

  Hello

  I want to change the name of the network on my Time Capsule, to match that of my home, all other routers network so I can use it as an access point more easily.

  How should I do it under OSX?

  Thank you.

  Open Airport utility, click on the Time Capsule icon, then click on modify in the window pop up.  Then go to the wireless tab, network name can be changed here.

• Printer wireless network name recognition

  I have an all-in-One of C4795 printer, on Vista 64-bit, which can not connect again ATT Uverse router. The router has been replaced and printer identifies the old network name/number. I tried everything the HP web site offers, but nothing worksI. At some point in the implementation I find the new name/number and I printed the report of NetworkTest wireless and it shows the old name/number. Help! Joe C.

  Hi Joey1969,
  
  Follow these steps in the document below. Let me know if you need help.
  
  http://goo.GL/jXYCw