EA4500 new brick

Similar Questions

• Laptop completely new brick

  Hello

  I currently own a HP Pavillion DV7, I don't know the exact model number (and is not really relevant) but it is the one with 1 TB hard, i7, 8 GB of RAM and Windows 7 64-bit processor.

  In any case, I usually have to peform a wipe of high level on my hard drives regularly to keep them well-oiled and every computer I've already owned allowed me to do it without problem. My laptop started trolling a bit, so I thought it was time to give him a cloth (I intended to recover using the recovery as disks always) However, what happened on this occasion is, while wiping using the software 'WipeDrive' power cord slipped off and Mid-wipe off the system. It's me locked hard disk I/O.

  (Please note that the software in question are well known and I have used it before without problem)

  There is an article on the website of software addressing this issue (Article) however, it is useless to me because it won't recognize is no longer bootable CD as I guess the drivers have already disappeared for the BluRay player and they are not present on the wiping software CD (it says "no boot device - Indert boot disk and press any key"). The only CD that will boot is the recovery CD (which I assume is because the drivers for the BluRay player are loaded with it from the disk), but he won't let me not reinstall the OS from there anyway because of the lock of I/O.

  Diagnostic test quote the error code 306.

  The drive has not failed if it is just locked. Is there a way I can get it to read the bootable CD, so I can follow the instructions in the article above?

  Is it not possible for me to use a linux live CD to achieve the same? Is this command just a standard control in the linux kernel

  ' hdparm - user-master u - security - unlock WIPE/dev/sda ".

  Hello

  It's true.  Any player that fits any manufacturer until the maximum capacity of 1 TB - this applies to the two drive bays, but as I said before only the player connected to the first sata port is bootable.

  Kind regards

  DP - K

• MINDSTORMS

  Hello world

  I tried to run an old .vi (which works very well on the NXT) on my new brick EV3.
  But if I do, LabVIEW says that some Invoke and property nodes don't are not supported on the device.

  But here, I thought that EV3 brick has full compatibility with LabVIEW.

  So, I tried to replace the "EV3Output" and "NXTOutput" with...

  However there is no functional property for the EV3 node.

  Does anyone know why there is no property node but invoke nodes for the EV3?

  I've included a few attachments.

  Thanks in advance for your helb

  PS: Sorry for my bad English

  You might have better luck in the LabVIEW for LEGO MINDSTORMS Board on the forums.

  I have not used, but looks like the interface of programming/API for the EV3 is different from the NXT, so you need to find the appropriate equivalent functions and it could be done in the same way on the EV3 (e.g. using screws instead of nodes of property, for example).

• tween AS3 bug

  Greetings fellow explores, =)

  I've been at this for quite awhile now and unfortunately met my match. for the sake of brevity ill be quick. I have a document class that runs a timer and programmatically loads a clip and a loop for that pile up on each other. then a dynamic Tween move them from one end of the stage to the other. Here's the question. When I run the swf file occasionally one or two interpolations stop to half way and I have not a clue as to why this is.

  document file

  package {
   
    //are main stage is a movieclip
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.utils.Timer;
    import flash.utils.*;
    import flash.events.*;
   
    import fl.transitions.Tween;
    import fl.transitions.easing.*; 
    import fl.transitions.easing.None;
    import fl.transitions.TweenEvent;
   
    public class Game extends MovieClip {
   
    //varibles 
    public var brickStack1:Array = new Array(1);
    public var brickStack2:Array = new Array(1,1);
    public var brickStack3:Array = new Array(1,1,1);
    public var brickStack4:Array = new Array(1,1,1,1);
    public var brickStack5:Array = new Array(1,1,1,1,1);
    public var arrayOfBricks:Array = new Array(brickStack1,brickStack2,brickStack3,brickStack4,brickStack5);
    public var brickLoader:Timer = new Timer(2000,0);
    //public var arrayLength:int = 0;
    public var brickStack:int = 0;
       public var brickStackBottom:int = 0;
    var arrayLength:int = 0;
    var arrayLengthBottom:int = 0;
    var b:int = 0;
   
    public function Game() {
   
    trace("game");
    //addEventListener (TimerEvent.TIMER , loop);
    brickLoader.addEventListener (TimerEvent.TIMER , loop);
    brickLoader.start();
    //create a new instance of the Brick
   
    //var brickTween = new Tween( k,"x", None.easeNone , k.x,k.x - 1000, 5, true);
    }
   
   
   
   
    function loop(e:TimerEvent):void {
   
    //declare a varible for the for loop with Math.random
    brickStack = Math.floor(Math.random() * 5) ;
    //trace(brickStack);
   
    if(brickStack == 0) {
   
    brickStackBottom = 4;
   
    }
    if(brickStack == 1) {
   
    brickStackBottom = 3;
   
    }
    if(brickStack == 2) {
   
    brickStackBottom = 2;
   
    }
    if(brickStack == 3) {
   
    brickStackBottom = 1;
   
    }
    if(brickStack == 4) {
   
    brickStackBottom = 0;
   
    }
   
    arrayLength = arrayOfBricks[brickStack].length;
    arrayLengthBottom = arrayOfBricks[brickStackBottom].length;
   
   
    trace(arrayLengthBottom);
    //arrayOfBricks[brickStack];
   
    //brick load ratio 1:5       2:4      3:3      4:2      5:1 
                     //+4*5/5   +2*4/4   +0*3/3   -2*2/2   -4*1/1
    //formulate a mathmatically loader paradiam 
   
   
    for(var i:int = 0;i < arrayLength; i++){
    bottomLoop();
     
   
    var obj:Brick = new Brick();
    obj.x = stage.stageWidth + obj.width;
    obj.y = (i*40);
    addChild(obj);
   
   
    var brickTween = new Tween( obj,"x", None.easeNone , obj.x,obj.x - (stage.stageWidth + obj.width*2), 4, true);
   
   
   
    }
     
    b = 0;
   
   
   
   
    //k = someArray[]
    //
   
    }
   
    function bottomLoop() {
    for(var o:int = 0;o < arrayLengthBottom; o++){
   
    var objBottom:Brick = new Brick();
    objBottom.x = stage.stageWidth + objBottom.width;
    objBottom.y = (stage.stageHeight - 40) - (o*40);
    addChild(objBottom);
     
      var brickTweenBottom = new Tween( objBottom,"x", None.easeNone , objBottom.x,objBottom.x - (stage.stageWidth + objBottom.width*2), 4, true);
    }
    }
   
   
    }
   
   
  }
  

  Class of brick

   
  package {
   
    //import necessary flash files/libraries
    import flash.display. *;
    import flash.display.MovieClip;
    import flash.events.*;
    //import flash.transition.Tween;
    //import flash.transition.easing.*;
    //import flash.utils.Timer;
    //import fl.transitions.Tween;
    /*import fl.transitions.easing.*; 
    import fl.transitions.Tween; 
    import fl.transitions.easing.None;
    import fl.transitions.TweenEvent;
    */
   
    public class Brick extends MovieClip {
   
    //declare varibles 
    //private var brickStack:Number = Math.floor(Math.random()* 5) + 1;//somenumber) + 1
    //private var brickLoader:Timer = new Timer(2000,0);
    //private var arrayOfBricks:Array = new Array(1,2,3,4,5);
    public var _root = MovieClip(root);
   
   
    //declare constuctor function no perameters
    //reminder inoder for constuctor function to work Brick sprite must be loaded onto stage
    public function Brick(){
   
    //tells class what proporties it has 
    //brickLoader.addEventListener (TimerEvent.TIMER , brickTimer);
    //brickLoader.start();
    //var brickTween = new Tween(_root.Brick,"x", None.easeNone ,_root.Brick.x, _root.Brick.x - 1000, 5, true);
       
    }
   
    //function brickTimer(e:TimerEvent): void {
   
    //trace("brickTimer");
    //}
   
   
    }
  }
  

  have put this code in the class of bricks but I don't know how to refer to brick the source code of its category

  would be very happy to help. Thank you so much

  It's exactly the same question: you're crushing then all brickTween, but the latter can be gc would be before the end.

  use a table to prevent your pre-teen gc would be.  affect the length of the array to zero when you want tweens that gc would be:

  	for (var i: int = 0; i)< arraylength;="" i++)="" {="">
  	bottomLoop();
  	var obj: brick = new Brick();
  	obj.x = stage.stageWidth + obj.width;
  	obj.y = (I * 40);
  	addChild (obj);
  	brickTweenA.push (new Tween (obj, 'x', None.easeNone, obj.x, obj.x - (stage.stageWidth + obj.width * 3), 4, true));

  }

  }

  function bottomLoop() {}

  for (var o: int = 0; o)< arraylengthbottom;="" o++)="">

  	var objBottom: brick = new Brick();
  	objBottom.x = stage.stageWidth + objBottom.width;
  	objBottom.y = (stage.stageHeight - 40)-(o * 40);
  	addChild (objBottom);
  	brickTweenA.push (new Tween (objBottom, "x", None.easeNone, objBottom.x, objBottom.x - (stage.stageWidth + objBottom.width * 3), 4, true));

  }

  }

• The variable that is used before a value is assigned?

  Hi, I signed up today because I seriously need help with an assignment of Director. I have problems with the jargon that I don't understand everything.

  My mission is supposed to be pretty simple, but for some reason any I can not past. I got sample games of my and I'm supposed to take one of my choice. These are of simple games such as solitary, hanged, Wordsearch, maze game and space invaders etc.

  These games are all sweet, all are in black and white and consist of simple and plain boring images and icons and emblems. Everything I'm supposed to do is change the game to make it look like visually more attractive and pretty. So, for example, there is this game of breakout and I want to change the current bricks that are there (because they have very unpleasant air) with the new coloured bricks I did in photoshop. So I import the new images of brick, that I did it, copy the code in the old bricks and then paste jargon code in the new bricks and then replace the old sprite with a new on my score.

  However, when I do this it never compiles and I get this message:

  Script error: Variable used before a value is assigned

  Then the next part of the error message will be dispay specific jargon that Manager don't understand / recognize, such as:

  List of addProp, #pPoints, ¬?

  I don't understand why it does not recognize the code more just because I have replace the brick with my own. It's always the same code that he recognized before with other bricks. What I did was to remove this old brick and place my new and improved in exactly the same place on the score and then open the sprite and paste the code.

  These sprites have some quite long codes, so it is difficult for me to find what the problem is. Someone help me please, this assignment was to be simple according to my professor. I was supposed to just copy and paste the code and it must have worked.

  Do a find-replace in all the scripts replacing ¬ with \.

• Table 2D and removechild problem

  Hello everyone

  I have a problem with the removal of the children of moving table 2d (right to left). When the collision is detected chart repersenting the element disappears, but space is always busy, the collision occurs again. I get error 2025

  The creation and removal of the table is lower at:

  I have create table 2d:

  Bricks = new Array();

  brickContainer = new Sprite();

  for (var cols: int = 0; passes < numCol; passes ++)

  {

  Bricks.push (new Array();

  }

  for (var col: int = 0; col < numCol; col ++)

  {

  for (var row: int = 0; line < numRow; line ++)

  {

  addBrick (col, row);

  }

  }

  public void addBrick (int col, row: int)

  {

  var newBrick:Brick = new Brick();

  newBrick.col = col;

  newBrick.row = row.

  newBrick.type = Math.ceil (Math.random () * 3);

  newBrick.x = col * spaceX + offsetX;

  newBrick.y = line * spaceY + offsetY;

  newBrick.gotoAndStop (newBrick.type);

  brickContainer.addChild (newBrick);

  Bricks [col] [row] = newBrick;

  }

  addChild (brickContainer)

  I move the items to the right on the left:

  public void moveBricks(e:Event)

  {

  for (var row: int = 0; line < numRow; line ++)

  {

  for (var col: int = 0; col < numCol; col ++)

  {

  Brick .x-= [col] [rank] 5.

  If (bricks [col] [line] .x + bricks [col] [rank] .width/2 < 0)

  {

  Bricks [col] [row] = rank there * spaceY + offsetY;

  Bricks [col] [line] .x = (numCol-1) * spaceX + offsetX

  }

  }

  }

  }

  And I check the collision

  for (var row: int = 0; line < numRow; line ++)

  {

  for (var col: int = 0; col < numCol; col ++)

  {

  If (ball.hitTestObject (Bricks [Row] [col]))

  {

  If (ball.x + ball. Width/2 > = Bricks [col] [Row] .x-Bricks [col] [Row]. Width/2)

  {

  changes of ballDX * = - 1

  }

  If (ball.x + ball. Width/2 < = Bricks [col] [Row] .x + Bricks [col] [Row]. Width/2)

  {

  changes of ballDX * = - 1

  }

  If (ball.y + ball. Height/2 > = Bricks [col] [Row] there-Bricks [col] [Row]. Height/2)

  {

  ballDY * = - 1

  }

  If (ball.y + ball. Height/2 > = Bricks [col] [Row] there + Bricks [col] [Row]. Height/2)

  {

  ballDY * = - 1

  }

  brickContainer.removeChild (Bricks [row] [col]);     The line throwing error 2025

  }

  }

  }

  You can assign this element in the table to be null.  Then, before you pass through the hit test check if the brick is null or and only contiue to treat it if it is not null.

  You could also let the single table and check if the child is in the use of brickContainer

  {if (brickContainer.Contains (Bricks [Row] [col]))}

  do all the hitesting and whatnot

• Abduction of children through hitTestObject

  Before asking what I'm sure will be a very stupid question, let me say that I am a total newbie to the Action Script. I try my best to make a simple game of University, and I tried, but he cannot know.

  Anyway, the game is essentially Breakout, where you control a paddle and try to hit a ball to the blocks.

  I can't understand how to remove blocks when the ball strikes.

  I got this far.

  If (ball.hitTestObject (b3)) {}
  yDirection * = - 1;
  stage.removeChild (b3)

  Where b3 is block number 3. (I have 6 blocks, b1 - b6, respectively).

  It works for the first time the ball hits the block. the block disappears and the ball bounces. However, when the ball moves on this domain yet, it crashes and I get an error.

  That is right.  but the hittest code you'll probably want to put in a function, then you can call it when you want to:

  var brickA:Array = [];

  var tl:MovieClip =;

  for (var i: int = 0; i<>

  TL ["b" +(i+1)] = new brick();

  brickA.push (tl ["b" +(i+1)]);

  addChild (tl ["b" +(i+1)])

  TL ["b" +(i+1)] .x = 5 + i * (TL ["b" +(i+1)]. Width + 10);

  TL ["b" +(i+1)] there = 100;

  }

  function hitTestF (): void {}

  for (var i: int = brickA.length - 1; i > = 0; i--) {}

  {if (ball.hitTestObject (brickA [i])}

  brickA [i].parent.removeChild (brickA [i]);

  var temp = brickA [i];

  brickA.splice (i, 1);

  Temp = null;

  }

  }

  }

• Duplication of video Clips

  Hello
  
  I have it is probably a very simple thing to do but I can't find anything that seems a duplicate, and perhaps clip this function has been completely removed and recreated to all in the new AS3 where it was available in AS2.
  
  I wonder if anyone can help me with this.
  
  I have attached an extract of my code below that defines what I'm looking for, any help would be appreciated.
  
  Basically, what I want to do is duplicate a movieclip in a for loop and placed them side by side with the other.
  
  Here is my code:
  
  for (i = 0; i < 10; i ++)
  {
  addChild (_brick);
  _brick.x = brick.width * i;
  }
  
  Thanks in advance
  
  Lee

  Lee,
  You must assign each new brick to an instance, and then add this child to the scene. There may be a way of coding more appropriate to do so, but based on your code, you need to turn your clip of brick link and make sure it is named "_brick". Then, it should work.

  for (var i = 0; i)<10; i++)="">
  var myBrick = new _brick();
  addChild (myBrick);
  myBrick.x = myBrick.width * i;
  }

• New Ipod Touch (6th generation)... Brick!

  New Ipod Touch (6th generation).  Right out of the box and as expected, another update Super bricks my new Ipod Touch.  My question is HOW?  And before you ask, YES everything has been updated to the latest version (itunes, Java, QuickTime, IE, Windows and other applications you can think of).  I purposely keep a copy of an older version of Itunes on an old laptop running because this is the only version that will recognize my Ipod when happen (both latest and Itunes).  Given zero has no effect.

  When say you that the device is brick what is on the screen today? It does not force a reset? Try If your iPhone, iPad or iPod touch does not illuminate, If iTunes does not your iPad, iPhone or iPod , or If you cannot update or restore your iPhone, iPad, or iPod touch.

  See this note about QuickTime.

  TT2

• Need a new product key for a portable brick

  Need a new product key for a laptop of bricks have the old sticker product key on the machine, but she says s not valid.

  I don't have the original disc, another has been used for this installation.
  The laptop is all original material, and I can give you the serial numbers into the chips.
  Thank you
  Frustrated by dealing with MS

  You MUST use the same version and edition of the disc (IE. (Home, Pro, MCE, touch and OEM, sale retail or volume).

  If you do not use the right disk, the key you cannot install.

  For memory, this is a community forum, we cannot give the activation keys, because we do not have them.

• New laptop a brick?

  I bought a HP Envy 15-q210TX on 8 August 2015 and spashed kid last week a friend a little juice of the Cup who landed on the keyboard before I could take a towel, my laptop turns off suddenly and I couldn't feed him since.

  After calling the store I bought it at and HP support, repair it will cost $1543,09, which is more that I bought it for.  I again using my child of 5 years old but still usable Sony Vaio.

  I swear there's a sign upward on HPs SG 50 promotions, one of them, including an extended warranty with included accident coverage at the time.  Yes, I went to a place of redemption in the Orchard Central and she bought after you bought the laptop.  Nobody seems to know what I'm talking about.  I also never got my free T-shirt of 50 SG either even if I went to the website, www.hp.com.sg/window10 to save and collect, but that's another story.

  Did I just spend $1400 for a brick?  Someone at - it suggestions on what I can do use?  I'm really really sad feeling about it now, because I paid for a subscription to Norton that was already loaded on your laptop and you import things on it like my completed tax forms.

  Seems the service and support is a bit different to Singapore.  In the United States for comparison, I could have gone to any Costco and exchanged for a new laptop, no questions asked.   Everyone I spoke so far, does not seem to be compassionate about my situation and were not able to guide me on what other options there except to pay the exorbitant amount for repair.   I hope someone HP reads these forums and can do something about it.

  Thanks for any help or advice you can give.

  @sad- panda

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  Thank you for visiting the Forum from HP Support.

• WRT1900AC - brick? having firmware new flash hard

  Then my friend tried to put OpenWRT on his WRT1900ac and he thinks that he he bricked. Of course, I'm done with the broken router.

  I have two computers available to try to solve this problem, an iMac with El Capitan and a Thinkpad Windows 10. I have a USB-> TTL series adapter and I disassembled the router to access the terminals of series, I tried flashing the new firmware on TFTP but my utility doesn't even know something is connected to the COM (Yes, I have the right drivers)

  Here's what it does. I turn on the router, and after a few seconds, the power LED flashes. So, if I have an ethernet cable plugged in, the corresponding led lights up. So many Windows, I put my network settings to force 192.168.1.1 and ping 192.168.1.1 succeeds... but he also managed when I turn off the router. (Yes I turned off all other network connections). When the router is turned on and I open a browser at this address, I get a blank page. The gui of Linksys TFTP cannot connect at all. (I get a message like "router has failed")

  From my Mac, it's sort of a different story. I can't find a USB-> COM at all driver, so serial interface is released. But I can manually set my network to 192.168.1.1, ping it when the router is off, don't get no response (good) - I turn on the router, ping, come back successfully 64 bytes (good). I can open 192.168.1.1 in a browser and get the page of "it works!" But if I try to Flash a firmware using the integrated terminal TFTP protocol, I get a time out (as follows...)

  tftp 192.168.1.1
  tftp> binary
  tftp> timeout 120
  tftp> put firmware.img
  Transfer timed out.
  

  So I am all out of ideas, are too recent for this problem in my operating system? I should go out by the live usb Linux Mint?

  Use your computer for Windows 10, it will be easier to update the firmware.

  1. Install the version x 32 or x 64 http://www.jounin.net/tftpd32_download.html tftpd
  2. Then install Tera term https://en.osdn.jp/projects/ttssh2/releases/
  3. Once installed, Tera Term configure it to use the USB port to the port com TTL with the parameters 115200,8, no, 1 no
  4. Power on the WRT1900AC; You should see boot you after the release of text in Tera term; If you do not see the output, it is most likely that you have the RX and TX inverse series. Don't proceed to the next step until you confirm the serial communication is increasing.
  5. Press a key in Tera term during the second pause 5 pause of submarine appears. That you will get a u-boot prompt. Attention here because you can do a hard easy work if you run the wrong commands.
  6. Configure the network card in your computer to the IP 192.168.1.254 netmask 255.255.255.0, no gateway and no DNS.
  7. Connect to the computer via an Ethernet cable to a LAN of WRT1900AC port.
  8. The u-boot prompt, run "ping 192.168.1.254"; If the result is 'living' submarine can connect to the computer.
  9. Make sure your firmware is in the current directory of the tftp server and the tftp server is listening on 192.168.1.254.
  10. To the submarine command prompt run "setenv firmware_name my-firmware - filename.bin" for the WRT1900AC V1 or "setenv firmwareName my-firmware - filename.bin" for the WRT1900AC\ACS\V2 or WRT1200AC
  11. The u-boot prompt, run "run update_both_images" wait for the command to complete.
  12. Then run "reset" or the router power cycle

  To display the u-boot firmware load vars courses run the below to the u-boot prompt:

  1. print Ipserver
  2. IPAddr impression
  3. firmware_name printing or printing firmwareName

• New firmware, new problems with EA4500

  I logged this morning to a new firmware on my EA4500. I have disabled the automatic upgrades when I got the device because at the time of the hidden networks was not supported by the firmware of the Wi - Fi chip. Needless to say I was shocked when I logged in this morning. I have no idea how the new firmware had updates since I was the only one on our staff with the password on this device.

  However, I went in the new admin panel MAC filtering section and tried to add a new device to our list. I get "Unexpected error" 2177 when you try to save the updated list.

  Show details: / jnap, macfilter, SetMACFilterSettings - status: 200 OK Date: Tuesday, August 7, 2012 06:01:59 GMT Server: lighttpd/1.4.34 connection: close Content-Length: 42 Content-Type: application/json; charset = utf-8

  I can't go past this screen to save the MAC address on the list of filters. Any ideas? Current firmware is 2.1.41.162351

  Try the Revert to previous FW?

  Safely update FW, I recommend doing the following:
  1 save the router config to the file first using IE or FF with all modules disabled security.
  2 factory reset the router with all devices disconnected or turned off accept for 1 Wired PC.
  3 reload or update the FW using IE or FF. Just download the FW file to your wired local LAN PC.
  4 factory reset the router and then set up from zero all first and test with loading saved configuration from the file. Check if problems are solved before loading the saved configuration file.

• EA4500 will not change to the new public IP address

  I noticed that, after the new Firmware update, the EA4500 will not change to a new public address.  I check my logs and my IP address is the same that goes back to a 25/03/2012.  I changed my router to my old E4200V1 and it turns into a new address when the old one expires.   I tried several resets hard but in vain.

  Ask your ISP. The decision taken by the DHCP server from your ISP, what IP address it assigns. You must accept what they give.

• New EA4500 router slow?

  Just bought a new router EA4500 and expecting to have better performance (speed/signal strength) than my old router Cisco/Linksys E2500, but it is significantly slower than my old router. How can I raise the router by changing some aspects of it (like changing the channel). I can't find the Linksys router configuration page, as he brings me just to "Smart Wifi" Linksys Page which leaves me not any adjustment of real progress. How can I improve my performance of routers / access the page to change it?

  Hi Harp17. You can always change the settings of your EA4500 manually wireless. Access the right page the 192.168.1.1 and once you are on the page SmartWifi, click Wireless on the left side of the page. Click "Edit" under the 2.4 GHz or 5.0 GHz, regardless of the band you want to edit on. You can also try to change the name of the wireless network and wireless to see how it goes.

  Hope the above helps.