EA6300 limit hard Wi-wired and speeds (50mbps up to 7.2 Mbps

Similar Questions

• Envy 17 t J000 - maximum hard drive size and speed

  I'm going to put a 2nd hard drive into the open space in my Envy 17 t-j000.

  The States of Maintenance and Service Guide;

  Hard drives Supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)

  Customer-accessible

  Serial ATA

  Supports the following drives:

  ● 1 TB 5400 RPM, 9.5 mm

  ● 750 GB 5400 RPM 9.5 mm

  ● 500 GB 5400 RPM 9.5 mm and 7.0 mm

  Configurations to two hard disks:

  ● 2 TB: (1 TB 5400 RPM x 2)

  ● 1500GO: (750 GB 5400 RPM x 2)

  This seems to mean that I cannot use a single hard drive 2 TB 2 and cannot use a 7200 RPM drive.

  Is this correct? Bios denominator do not allow more than a drive of 1 TB or the 7200 RPM?

  CouldI partition just the 2nd 2-1 TB disk?

  Or the manual simply means that the standard unit of HP is not provided with larger than these sizes and I could actually use a 2 TB in the Bay of 2nd?

  It's the last... the list says just what HP sale: it does not describe a limitation of the system. However, I do not think that yet, the market offers a 2 TB drive that fits the available space. 2 TB 2.5-inch SATA drives I've seen are too thick. 7200 rpm or hybrid SSD; No problem.

  To add a second drive you'll need a second hard drive enclosure and cable.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Slow speeds E3200 use wired and wireless

  Hello

  I'm trying to understand why my E3200 is (for lack of a better word) 'throttling' my internet speed.

  I am registered for the 50Mbps data plan my ISP. When I plug my laptop directly to the modem cable (via LAN cable), I see near 50Mbps as internet speed (via speedtest.net). When I connect my router to the cable modem and connect through a LAN cable to the router, the internet speed comes down through a maximum of 26Mbps. NOTE, that I speak still wired and not wireless. With the Wi - Fi speed tests give the same results as well.

  In order to exclude the evidence, I have confirmed that there are not other devices on the network and any other bandwidth hogging applications running while I made these tests.

  Any thoughts on what configs could be twisted to improve the situation?

  All the...

  Spent the last 2 hours on the phone with a Cisco support person. After some fairly elaborate tests, they came to the conclusion that the unit is maybe defective. Fortunately, I'm covered under the hardware warranty, so I'll return it for a replacement.

  Thanks for any ideas for troubleshooting... And other people having similar problems with this model should also probably call assistance...

  See you soon

• Notebook Network Card - it controls wired and wireless?

  A few weeks ago, we were struck by lightning.  Several components wired ethernet were blown out.  My HP laptop was connected by CAT5e network at the time.  Now, the WIFI works, but the hard drive, Wired is DOA.  I don't know that there is a hardware failure.  Is the wired and WIFI, both controlled by the portable NIC... a $30 fix or will I need a new motherboard on the laptop?

  The "WIRED" network adapter is built into the laptop system board and would require the relocation of the card of the system to solve your problem. The 'WIRELESS' network adapter is a discreet card that is independent of the system board and can be replaced if necessary.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion Notebook Hard drive question and OS reinstall

  I have a HP Pavilion dv4-2155dx Entertainment Notebook PC, series: CND0053PFN.

  I recently received an error message of the INTELLIGENT notification that a failure of the hard drive was imminent (I also had a flat battery as well, thank YOU HP!). I backed up my files to an external hard drive to COMPUSA, bought a new hard drive and installed. I inserted one of my computer come with recovery disks (HP or Best Buy made so I can't make new ones if I wanted to). After a minute or two of hearing the reader has read that I received an error "No Bootable disc - insert boot disk and press any key." Tried several times more. Reorganize the BIOS settings to make the drive to read first, no help.

  I then came here, looked at a few other discussions. They were no help. (this is a as http://h30434.www3.HP.com/T5/Notebook-Operating-Systems-e-g/no-bootable-Device-Insert-Boot-Disk-and-... I watched)

  I tried most of the things on this page, including download of the boot disk utility, but even after the creation of this disc, I still get the "No Bootable disc - insert the startup disk, and then press any key" error. I then put the old hard drive new, and played music CDs to ensure that my drive was reading. It did not work properly. He also burned a disc as well so I think it's OK.

  I tried to make an iso image to the new disk plugged hard upward with a USB connection and this is where I met another problem. My laptop said that there are only 98 GB available on the new drive connected by USB. It is a 250 GB drive.

  What can I do to get just my copy of Windows on the new drive, so I can use my laptop without fear of a hard drive failure in the middle of a test for the College or something like that?

  Thank you.

  Hello:

  I can't help with the problem of recovery disk, but if you can read the product key 25 character Microsoft Windows on the bottom of your PC, you can do your own installation of W7 (DVD or a flashdrive bootable) media.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• help with HP Laser CM1415fnw wired and wireless installation

  Hi all

  I have a hard wired and wireless. He let me just do one or the other. Is it possible that I can do both?

  everything works if I'm wired or wireless, but the user wants to be able to use both.

  Any help would be great.

  Sorry, cannot be enabled by design.  That said, the devices on a network don't like the way that others are connected.  You can print from a wireless connection to a wired (Ethernet) printer and v/v.

• E4200V1 disconnects - wired and wireless

  I have random disconnects, but it is not only wireless, it's the trendy too.  I updated the firmware and I still have questions.  the 4200 worked fine for 3 years, and all of a sudden it just starts dropping across the network at random.

  Ideas?

  Thank you - kxlara

  Hi kxlara. Intermittent connection for wired and wireless is usually caused by a bad firmware. You updated the firmware version of the router yourself? Did you do a hard reset of the device as soon as you have made with the upgrade process? I suggest that you do. To do the correct reset, simply press the reset button on the router for 30 seconds while the unit is turned on. Release the button and unplug the unit. Reinstall the settings from scratch.  Hope that helps.

• Should we leave how much free space on the C drive before affecting the performance and speed?

  Hello!

  Hard drive of my new PC (C) is 1 TB (processor Samsung 7i, Windows 8.1). It doesn't have any other disk/partition. How this space is safe to use to store large files (videos, esp., stored in the native video library file) without harming the performance and speed?

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Thank you!

  Anna

  Sunday, March 1, 2015 10:59 + 0000, AnaFilipaLopes wrote:

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Planning your Partitions

  The Question

  Partitions, how much should I have on my hard drive, what do I use
  each of them for, and what size should each one be?

  It s a common question, but unfortunately this doesn t have a
  only simple, just answer to all the world. A lot of people will respond with
  the way they do, but their response isn't necessarily best for the
  person seeking (in many cases it isn't right even for the person)
  response).

  Terminology

  First, let's rethinking the terminology. Some people ask "should I".
  partition my drive? That s the wrong question, because the
  the terminology is a little strange. Some people think that the word
  "partition" means divide the drive into two or more partitions.
  That s not correct: to partition a drive is to create one or several
  partitions on it. You must have at least one partition to use
  He who think they have an unpartitioned disk actually
  have a player with only one partition on it and it s normally
  Called C:. The choice you have is to have more than one
  partition, not that it's the partition at all.

  A bit of history

  Back before Windows 95 OEM Service Release 2 (also known as Windows
  95 (b) was published in 1996, all MS-DOS and Windows hard drives have been set
  using the file system FAT16 (except for very tiny to aid
  FAT12). That 16-bit only because were used for addressing, FAT16 has a
  maximum 2 GB partition size.

  More than 2 GB of hard disks were rare at the time, but if you had
  one, you must have multiple partitions to use all the available
  space. But even if your drive was not larger than 2GB, FAT16 created
  Another serious problem for many people - the size of the cluster has been
  more great if you had a larger partition. Cluster sizes increased from 512
  bytes for a partition to no greater than32Mb all the way up to 32 KB for a
  partition of 1 GB or more.

  More the cluster size, the space more is wasted on a hard drive.
  That s as space for all the files is allocated in whole clusters
  only. If you have 32 KB clusters, a 1 byte file takes 32 KB, a file, a
  greater than 32 k byte takes 64 k and so on. On average, each file
  about half of his last group waste.

  If large partitions create a lot of waste (called "soft"). With a 2 GB
  FAT16 drive in a single cluster, if you have 10,000 files, each
  lose half a cluster of 32 KB, you lose about 160 MB for relationships. This s
  back in an important part of a player that probably cost more than $400
  1996 - around $ 32.

  So what did the people? They divided their 2 GB drive in two,
  three or more logical drives. Each of these logical drives has been
  smaller the real physical disk, had smaller clusters, and
  so less waste. If, for example, she was able to keep all the partitions
  less than 512 MB, cluster size was only 8 KB, and the loss was reduced to a
  a quarter of what it would be otherwise.

  People partitioned for other reasons also, but back in the days of
  FAT16, it was the main reason to do so.

  The present

  Three things have changed radically since 1996:

  1. the FAT32 and NTFS file systems came along, allowing a larger
  partitions with smaller clusters and so much less waste. In
  with NTFS, cluster sizes are 4 K, regardless of the size of the partition.

  2 hard drives have become much larger, often more than 1 TB (1000 GB) in
  size.

  3 hard drives have become much cheaper. For example, a 500 GB drive
  can be bought today for about $50. That s 250 times the size of this
  Player 2Gb typical 1996, about one-eighth of the price.

  What these things mean together which is the reason to be old to have
  multiple partitions to avoid the considerable wastage of disk space left.
  The amount of waste is much less than it used to be and the cost of
  that waste is much less. For all practical purposes, almost nobody does
  should no longer be concerned about slack, and it should no longer be
  has examined when planning your partition structure.

  What Partitions are used for today

  There are a variety of different ways people put in place several
  scores of these days. Some of these uses are reasonable, some are
  debatable, some are downright bad. I'll discuss a number of Commons
  partition types in the following:

  1. a partition for Windows only

  Most of the people who create such a partition are because they believe
  If they never have to reinstall Windows properly, at least they
  He won t lose their data and he won t have to reinstall their applications.
  because both are safe on other partitions.

  The first of these thoughts is a false comfort and the second
  is downright bad. See the analysis of the types of partition 2 and 4
  below to find out why.

  Also note that over the years, a lot of people who find their windows
  partition that has begun to be the right size proves to be too
  small. For example, if you have such a partition for Windows and later
  upgrade to a newer version of Windows, you may find that your Windows
  partition is too small.

  2. a partition for installed programs

  This normally goes hand in hand with the partition type 1, a partition for
  just Windows. The thought that if you reinstall Windows, your
  installed application programs are safe if they are in another
  partitions is simply not true. That s because all programs installed
  (with the exception of an occasional trivial) have pointers to the inside
  Windows, in the registry and elsewhere, as well as associated files
  buried in the Windows folder. So if Windows, pointers and
  the files go with it. Given that the programs need to be reinstalled if Windows
  the fact, this reasoning to a separate partition for programs not
  work. In fact, there is almost never a good reason to separate
  Windows of the software application into separate partitions.

  3. a partition for the pagefile.

  Some people think mistakenly that the pagefile on another
  score will improve performance. It is also false; It doesn t
  help and often I hurt, performance, because it increases the movement of the head
  to get back to the page to another file frequently used
  data on the disk. For best performance, the paging file should normally
  be on the most widely used score of less used physical player. For
  almost everyone with a single physical disk than the same drive s
  Windows is on C:.

  4. a partition for backup for other partitions.

  Some people make a separate partition to store backups of their other
  or partitions. People who rely on a "backup" are a joke
  themselves. It is only very slightly better than no backup at all.
  because it leaves you likely to be simultaneously the original losses
  and backup for many of the most common dangers: the head crashes and other
  types of drive, serious glitches to power failure, near lightning
  strikes, virus attack, even stolen computer.  In my opinion,.
  secure backup must be on a media removable and not stored in the
  computer.

  5. a partition for data files

  Above, when I discussed separate Windows on a clean partition,
  I pointed out that separate data from Windows is a false comfort if
  He of done with the idea that data will be safe if Windows ever
  must be reinstalled. I call it a false comfort that's because
  I'm afraid many people will rely on this separation, think that their
  data are safe there and so do not take measures to
  Back it up. In truth the data is not safe there. Having to reinstall
  Windows is just one of the dangers to someone a s hard disk and not
  probably even one. This kind of "backup" falls into the same
  category, as a backup to other partitions partition; It lets you
  sensitive to the simultaneous loss of the original and the backup on many of
  the most common dangers that affect the entire physical disk, not
  just the particular partition. Security comes from a solid backup
  diet, not how partition you.

  However, for some people, it may be a good idea to separate Windows and
  programs on the one hand of the data on the other, putting each of the
  two types into separate partitions. I think that most people
  partitioning scheme must be based on their backup system and backup
  plans are generally of two types: whole hard disk imaging
  or data only backup. If you back up data, backup is
  usually facilitated by the presence of a separate with data only partition;
  to save just the score easily, without having to
  collect pieces from here and elsewhere. However, for
  those who backup by creating an image of the entire disk, there is
  usually little, if any, benefit the separation of data in a partition of
  its own.

  Furthermore, in all honesty, I must point out that there are many
  very respected people who recommend a separate partition for Windows,
  Whatever your backup plan.  Their arguments haven t convinced
  me, but there are clearly two views different here.

  6. a partition to image files

  Some people like to deal with the images and videos as something separate
  other data files and create a separate partition for them. To my
  the spirit, an image is simply another type of data and there is no
  the advantage in doing so.

  7. a partition for music files.

  The comments above related to the image files also apply to music
  files. They are just another type of data and must be dealt with the
  just like the other data.

  8. a partition for a second operating system to dual-boot to.

  For those who manage several operating systems (Windows Vista, Windows
  XP, Windows 98, Linux, etc.), a separate partition for each operating
  system is essential. The problems here are beyond the scope of this
  discussion, but simply to note that I have no objection to s
  all these partitions

  Performance

  Some people have several partitions because they believe that it
  somehow improves performance. That s not correct. The effect is
  probably low on modern computers with modern hard disks, but if
  whatever it is, the opposite is true: more music mean poorer
  performance. That's because normally no partition is full and it
  so are gaps between them. It takes time for the drive s
  read/write heads to cross these gaps. Close all files
  are, faster access to them will be.

  Organization

  I think a lot of people overpartition because they use scores as a
  organizational structure. They have a keen sense of order and you want to
  to separate the apples from the oranges on their readers.

  Yes, separating the different types of files on partitions is a
  technical organization, but then is to separate different types of
  files in folders. The difference is that the walls are static and
  fixed in size, while the files are dynamic, changing size automatically
  as needed to meet your changing needs. This usually done records
  a much better way to organize, in my opinion.

  Certainly, partitions can be resized when necessary, but except with the latter
  versions of Windows, which requires a third-party software (the and the
  possibility to do so in Windows is primitive compared to the third-party
  solutions). These third party software normally costs money and not
  any point and how stable it is, affects the entire disk.
  with the risk of losing everything. Plan your partitions in
  first place and repartitioning, none will be necessary.  The need
  to repartition usually occurs as a result of overpartitioning in
  the first place.

  What often happens when people organize with partitions instead
  records are that they make a miscalculation of how much room they need on each
  This partition, and then when they run out of space on the partition
  When a file is logically, while having plenty of space
  on the other hand, they simply saving the file in the score of "poor".
  Paradoxically, therefore, results in this kind of score structure
  less organization rather than more.

  So how should I partition my drive

  If you read what came before, my findings will not come as a
  surprise:

  1. If your backup set is the image of the entire disk, have just one
  single (usually c partition :));

  2. If you backups just data, have two partitions one for Windows and
  application programs installed (usually c :)), the other for data
  (normally D :).)

  With the exception of multiple operating systems, it is rarely
  any advantage to have more than two partitions.

• Wiring and test of the Blackbird 002 video card fan

  I have a Blackbird 002 I bought directly from J & R.  Intel processor (i5 or i7), Vista 64-bit, dual NVIDIA 9800 GT cards.

  It is a great machine for a few years, but after several sessions with torches recent I recently that I booted up and it entered into VGA mode with an error «could not load graphic drivers» Windows

  I tried a clean install of NVIDIA driver but the same result on reboot; Mode VGA and no NVIDIA display options.

  I think one of the 9800 GT cards is dead.  So I opened the case and noticed the top, main card has been connected to both the power supply and a smaller type of connection, 2 white square pins.  I deleted the SLI connector and the power of these two cards, one of them removed from their slots and put the card back in top housing of the SLI.  I started upward and the machine starts normally - no error only VGA, NVIDIA Control Panel with no SLI option (as expected b/c that the 'bad' card remained uninstalled).

  Unfortunately with the single card installed the fan runs constantly and the card works extremely hot.  This happens without any games or from any application - simply slowed down, the fans run constantly and loudly.

  So I have two questions:

  (1) how determine if one of the fans in the case does not work properly?  I think this may have caused the first card to die and can be the cause of the card to run hot.  Looking for a way to review all case fans, check each working properly and troubleshoot as needed.

  (2) what is the additional connector to the first graphics card - connector 2 pin white square, and how to disconnect?  I have been unable to pull the connector of the card first, so it remains plugged in despite the fact that the card remains out of the slot.  I see a connection open white, small square on the map left, but I am unable to disconnect the dead card.  I think that it may also have something to do with the remaining card run hot, because it can be a power supply fan, that I am not aware.

  I simply into a new map (thinking that the GeForce GTX 570) but I'm afraid that she also only will burn quickly if a case fan is dead or if the connection of the second, smaller remains plugged into dead cards.

  Any feedback is very appreciated.

  two drivers of white pine is for sound hdmi so it is not necessary to be connected and can only be removed the pins on the map. 9800 gt cards run hot and the fan is cheesy on them. eVga precision tool allows you to monitor the time of the video card and adjust the fan speed. It is unlikely that one of the three fans died, but it's pretty easy to check the two top fans of the page and see if they are rotating. the third fan is left of the hard drives, so you'll have to see if this one works by removing some of the hard drive platters and watch. It feeds of cold air in the compartment of vga. You can also check the fan speed in the bios. I'd be surprised if you have a bad case fan. Here are the specs for the fans of the plant:

  Back to top

  Delta AFB1212LE - Ball fan DC 12V 0.14 has 1.68W 2000 RPM 71,27 CFM 32.5dB

  Hard drive Bay

  Delta AFB1212L - CFM: 62,93 noise: 32.5db

• iMac 21.5 "retina - HARD drive upgrade and / or install the Fusion drive?

  Hi all

  I recently bought a retina-iMac 21.5 "(fin 2015 obvs), without realizing it when I did so that it came with a slow hard disk 5400 RPM that will larn me - do your research the next time Cameron!" In any case, I'm trying to sell it, but my search for a buyer continues, I also try to establish - without much success until now - if a hard drive upgrade and/or installation of a fusion player any is possible. I am aware that the RAM in this model is not extensible.

  Any entry received with gratitude

  Although it is possible it is a company very difficult and will void any warranty future and Apple. Have you thought from the external drive Thunderbolt?

• Hard drive failed and I lost my product key?

  Hi guys,.
  
  So my friends hard drive failed and unfortunetly he lost everything.
  
  I replaced the broken hard drive for him and reinstalled Windows 10. However when I went to check if the OS has been activated, it showed as not been activated? I thought the machines after that Windows 8 had their licance saved in the BIOS, so we do not have this problem?
  
  Also there is no sticker on the back or under the battery that contains the product key for Windows.
  
  I also talked to Microsoft, but they were uable to help.
  
  Any help is appreciated!
  
  Thank you.

  KiddG wrote:
  

  It's a HP Pavilion 15-p264na. It came with Windows preinstalled as an OEM licance Home 8.1. It was then upgraded to Windows 10 at a later date using the free update successfully.

  Then the second option mentioned above. Didn't it actually triggered successfully after 10 win upgraded?

  If so, you should be able to activate just fine without problems, IF you use the same edition of Windows. You write it housed 8.1 - you now install Win 10 Home? You mentioned 10 Pro down...

  So I guess I'll with your third option and using the recovery media?
  
  I have 2 HP drives here for Windows 10 Pro for two different HP devices. I think these are the recovery CD, it says that they cotain the client software, if that is correct? Can I use these discs Pro on a BONE at home? Or that I'd be better by following the links you provided?

  Laughing out loud. I'm sorry. I am afraid that you cannot mix just DVD / CD / etc - they are for a specific model for the specific version of Win / edition. You cannot use a recovery media for HP computer to another - it will simply not work 99% of the time. You cannot mix editions of Windows (the House is for Home, Pro goes to Pro).  You want the recovery media for this unit, you need to follow the links.

  However, IF you have enabled the upgrade of Windows 10 post fine, you can simply download Win 10 ISO from here:

  > > https://www.microsoft.com/en-us/software-download/windows10/

  Download the tool, it will download an ISO and burn it to a DVD or write on a USB key. Follow the on-screen instructions, skip entered the key and move on. After installation, Windows 10 HOME should activate fine using digital entitlement if 8.1 Home Win allowed initially.

  I would like to know how this goes for you.

• After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

  After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

  In the future more facts and less editorial help here

  SO now, we know all about how you feel but nothing on your system or your problem

  What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

  You cannot merge libraries without third party software - Photos of power can merge pictures libraries

  You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

  When you first launched the Photos it has migrated the last used for Photos iPhoto library

  I hope this will help, but to get specific answers, you need to provide real information and not feelings

  LN

• Config double for hard drives internal and ex-

  I have an external hard drive on my laptop

  I would like to have something like "configfree" to have 2 config IE:
  * with drive external hard connected: swap and other temporary files on the external hard drive
  * without the external hard drive: all files "local."

  is this possible?

  Hello

  I can't give you existing information of this type of tools. In any case, in my view, it is not possible.

  Good bye

• Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

  After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

  Babis

  This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011

• my window was turn around how do l replace its hard to type and read

  original title: happychick

  my window was turn around how do l replace its hard to type and read lol

  Hi happychick,.

  Name like that, very cheerful...

  In any case, I think I know what that your implementation to...

  Once connected windows press on and now the ctrl and ALT keys Then press the arrow pointing upwards on the keyboard... some graphics drivers have revolving facilities with shortcut keys to activate. Hold ctrl and alt and then pressing the arrow flips/turns keys the entire screen.

  Hope that helps!

  Free Support Tools