EA6400 and 580 AC adapter usb

Seriously, I made the leap to one of these routers and bought computers Canada on Rideau in Ottawa Street, I had not a ca connection again... was running on N only... still a lot of drops and regular connection problems...

Now I buy a usb adabpter CA 580 to make this thing work at the speed that your COMPANY of LYKSYS of CISCO claims to be able to have... I'm 10 feet away and the best I can get is 65Mbps and sometimes it falls to 3 or 5 Mbps... * beep *?

I tried everything, placement of firmware, settings, you name it I did it... It is still has been the most frustrating piece of junk, I bought.

Because I waited to buy adapter, now the store... he meet with lynksis because that they maintain this past few weeks... so I ask if anyone has these magical speeds with these routers or it is just marketing hype...

Seriously upset and will never purchase from your company again if you do not solve the problem for me... I have

You have of course support WMM active?

Tags: Linksys Routers

Similar Questions

  • Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

    Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

    Yes and no.

  • Charger C - USB plug-and - adapter USB - C will not fully inserted

    We can insert is more completely the plug of charger USB - C OR USB - C adapter (USB - C, USB - A and HDMI).  They stopped short about 1-1, 5 mm.  Food is always delivered, but a very small movement can cause the power disconnected, even if most is still mainly in.  Data connections may be lost in the same way with potentially catastrophic effects.

    Is this a warranty issue?  It's rather disturbing if USB - C plugs/Sockets can fail if relatively fast especially in this case it's an all-Apple above adapters line and computer.

    Yes, usb ports a and c have a very known issue that no one is really writing.

    Is waved from time to time, the connections inside stops working. Also, I tested the adapter, you speak of and it heats more than all of the time and some time. Sometimes if give you him just an hour or two break and then it goes back to normal. His strange indeed.

    Also, I recommend the update to 10.11.3. There has been many corrections of bugs.

  • MacBook does not connect to Philips TV with adapter USB - C

    Recently, I bought USB Apple-C (very expensive) adapter for my Macbook from 2016. When I connect the computer to my Philips TV via an HDMI cable, after some initial flicker, I see a stable picture on the TV. The problem is that the hard stable image usually less than one minute. This flickering cycle and temporarily stable image is repeated several times until I have finally get an error message on the TV that says "video Format not supported" and the screen turns white.

    The HDMI cable that I use works perfectly with a Sony laptop connected to the TV even. Adapter USB - C has been also updated after I bought it.

    Someone has the same problem with their TV?

    Hello

    You are able to test it on another TV, with another HDMI cable?

    If it all works, I might suggest to return the adapter HDMI Apple and get another via online service or your dealer.

    Using the USB - C port and adapters on your MacBook (retina, 12 inch, early 2015) and later - Apple Support

  • My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

    My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

    The photos are not stored on the sims, sorry.

    You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

    Recovery mode:

    Turn off your iOS device.

    Plug charge cable to the computer only (not to the device yet).

    Open iTunes on your computer.

    Hold the button to power on your device and do not let go.

    Plug the cable into the device while keeping the power button.

    Wait for the computer to detect the device and wait that he eat.

    Restore as New first, then restore sauvegardΘ if you wish.

    https://support.Apple.com/en-us/HT201263

  • DV7 - 7333cl: how to extract usable data from a bad drive using 22 pins adapter usb to SATA on the new HD

    Greetings HP Forum,

    Recently, I replaced a bad hard drive on my laptop. I need now step by step procedure to extract usable data from the wrong drive using 22 pins adapter usb to SATA on the new HD.

    NOTE: I can't not all data that especially if some of the software downloaded on the replaced disk can be altered. Should I first download Internet Antivirus to protect my new hard drive? I'm not an expert, or even close to this when you work on the back of the laptop, so I'll have to step by step how to download and to partition the data recoverable and software, etc..

    Thanks in advance for your help... I greatly appreciate it!

    See you soon!

    Wes

    It is not complex. Attach the drive to the adapter and connect it to any other computer with good antivirus and antispyware installed. I use Malwarebytes and Avast. When you connect the adapter with the drive connected to the usb port, the drive will appear and it will be assigned a letter maybe E:\ or F:\ or something else. Immediately, he analyzes with the antivirus and anti-spyware. Quarantine or delete any virus or malware it finds. Then, it's just a matter of navigate the disk and copy and paste the contents of the host computer in a directory for this purpose. Obviously, you can copy from documents word, photos, music files, but you cannot copy the applications like Microsoft Word, iTunes. Photoshop.  You may need to take ownership of the files on the old hard drive, but Windows will guide you through this. Don't know what else I can answer.

  • Iconia W4-820 will not charge with the power adapter USB Std

    Bought my W4 Iconia four weeks ago, a demonstration model, the last of them. It was packed in the box with a micro USB x adapter USB OTG cable and a power adapter. Back at home I discovered that the power adapter has been to Asus, possibly mixed in the shop. The prospective buyer of the Asus Tablet demo likely will get the Acer adapter. Adapter Asus with micro USB male connector works fine; specs are 5.2V - 1.35 amps; seems to be a STD USB adapter. The Asus adapter has a connector to USB female port to connect to a USB x microphone cable to USB adapter (with cable power adapter came in the box). Bought a 2nd power with USB 2 socket adapter to connect my W4 Iconia and my Garmin Zumo390 browser to an adapter. Specs are 5V - 3.5 amps.
    The Zumo works very well with the new card, but does not work my W4. Charge light stays off. USB ports switched to he Zumo and the Iconia W4, but same result. Zumo fresh, but W4 not. Borrowed another power adapter USB, 5V - 2 mines anti-personnel and new Zumo accusations, but the W4 still does not work. Also tried different USB adapter cables, but the same thing; Zumo invoice, W4 does not work.
    How is that possible? I can't tell the difference of 0.2 V between the Asus adapter and a USB adaptor STD would make the difference. But maybe I'm wrong. Wanted for adapters for the W4 Iconia and found several, but all the 5V as expected.
    Can anyone help.
    Will go to the shop again next week, but if I need an adapter V 5.2 I should order with Acer. 5.2 V adapters do exist not (readibly).

    Resolved issues. A dark and humid Sunday afternoon back to the store with the Tablet and all the bells and whistles. Changed the card Asus for the original Acer 5V - 2Amps (10W). Took the time to find the Acer adapter in the store. Demonstrated the adapter 2nd with 2 output USB ports and it wouldn't work with the Tablet W4. Tried another and found to be ok. 2 USB ports have a different power, a port for a smartphone and the other port is one tablet. Total power rating of the adapter is 17.5W (5V - 3.5Amps); some 2.5 and 1Amps. A happy man is back home again.

  • Adapter USB from Cisco at the HUB of Virgin?

    I think the upgrade on a faster fiber-optic broadband offered by Virgin Media. This new installation will include a combined modem and router known as the HUB of the Virgin. However, I currently have a separate Virgin modem connected to a Cisco router. I use to connect to this wireless adapter USB WIFI of Cisco router.

    The question is: if I know have a cisco router, my adapter USB Cisco will be able to connect to a Cisco routers not?

    Thank you

    Technically it should be. As long as the router is wireless capable, it needs to connect.

  • Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

    Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

    Hello

    It is possible in some cases - Adpater, power and the ability to read the disc
    are the issues.

    Check with the manufacturer of phone and the USB key and their forums.

    How to: use your USB with the Nexus 7 [root]
    http://www.androidcentral.com/how-use-your-USB-flash-drives-nexus-7-root

    For phones Windows ask in this forum and check the support.

    Answers - Windows phones
    http://answers.Microsoft.com/en-us/WinPhone

    For other phones check with their Support and Forums.

    Support of SanDisk and Forums (and others) would be a good source of info.

    SanDisk - Support
    http://www.SanDisk.com/SanDisk-support/

    SanDisk - Forums
    http://forums.SanDisk.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to install drivers for "Dell adapter - USB 3.0-HDMI/VGA/Ethernet/USB 2.0"?

    I bought the Dell XPS 13, and I need an adapter to connect to Ethernet:

    Dell adapter - USB 2.0 3.0-HDMI/VGA/Ethernet/USB. -

    How to install this driver? -Will I install it on my "gold statue?

    I cannot join the domain because Windows Setup cannot find the required driver.

    Tried to install the driver as the latest installation command before the restart, but without success.

    No one knows how to fix?

    Hi Wooltown,

    ImageAssist does not support devices that are not included in the system.  If you want to integrate support for the driver, you can follow the instructions mentioned in the following post.

    http://en.community.Dell.com/TechCenter/enterprise-client/f/4916/t/19603435

    Thank you

    Tyler

  • Can I use a USB B Female adapter USB A Female in a HP Pocket Media Bay?

    Can I use a USB B Female adapter USB A Female to transform the unused HP Pocket Media Bay of a s3230uk in an area of loading of MP3?

    Surely a small load player would take less power, then a HARD drive?

    I can confirm it works and is a good way to make use of the space.

  • Micro adapter USB keeps disconnecting when I try to copy the files.

     
     
    Micro adapter USB keeps disconnecting when I try to copy the files.

    Hello

    I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

    Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

    Any help will be appreciated, thanks in advance!

    Hello

    1 did you change on your computer?

    2 did you receive an error message?

    I suggest you to check with the other USB port.

    Method 1:

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    Method 2:

    I suggest you to remove and reinstall all USB controllers

    To remove and reinstall all USB controllers, follow these steps:

    (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

    (b) click on the Hardware tab.

    (c) click the Device Manager button.

    (d) expand Bus USB controllers.

    (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    (f) restart the computer and reinstall the USB controllers.

    (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  • The charge amplifier power adapter USB

    I come from the QX30 and it uses a USB cable to charge the battery, but on my vacation I rarely takes a computer. Thereore, I use a USB adapter to plug into the wall and I wonder if the amplifier of importance at all. You can get them in 1AMP or 2.1AMP, etc and I normally like the amps higher for faster loading and no problem using an amp to 2 + a with Sony battery/camera?

    Hi checkyourmirror,

    Here are the details based on the specifications of this Cybershot:

    • Maximum load current is 0.9 Amp
    • The maximum charge voltage is DC V 4.2

    If my post answered your question, please mark it as "accept as a Solution.

    Thanks, Dave

  • I am not given the option to use the adapter usb display

    I have a p4 dimension reference dell 3100, running on win 7, I tried to add an adapter usb display for another screen for display, but windows does not give me the possibility to see, I installed the driver and software for the extra adapter but when I try to change screen I get only an option and no additional extra screen on the display properties is to win 7 too recent for my dell or am I missing some sort of update? I have tried almost everything, even try to re install the program several times, the adapter works on my brothers laptop and it gets additional screens in display properties, but I don't have, can anyone help please.

    Hello

    you current video card has a place for a monitor on the back?

    If so, buy a cable dual monitor and it is not necessary to double video cards.

    If this is not the case, make sure that the second video card is recognized in the Bios and make sure that the correct drivers are installed.

    Also, if you do a you tube search on "how to set up two monitors, you find a great video on how to set up.

    For any question,.

    Let us know

    B Eddie

  • Adapter USB assigned, but not "seen" by comments

    Given: on a victory - 8.1 -64-bit host, I have attached the old hard drives with a usb-to-ata adapter (manufacturer LogiLink).

    Problem: When I attribute the adapter usb to victory - 8.1 -64 comments, connected disks disappear on the host, but do not appear on the guest computer. In the guest Device Manager, the usb device is not yet listed. For comparison: the same usb device can be successfully assigned to a guest Windows - 8.1 - 32 bit or any other comments of 32 bits.

    What may be missing in the prompt 64 bit concerned?

    LogiLink USB to the ATI/ATAPI bridge is not recognized by a system up and running, but it's starting.

Maybe you are looking for

  • Satellite A660 - FN keys without function

    Hi, once again its me :D in any case, I noticed that FN + f keys do not work. I can't lock my computer with him, I just can't cut it with fn + esc, I can't adjust brightness with fn + f6, f7 and so on. Any ideas what could be? Function of the lighted

  • Replace drive hard ze4900 with disk 5400 RPM?

    I am trying to replace the HARD drive on a ze4904US Pavilion Notebook, Phoenix BIOS F.15...  The original drive is a 40 GB 4200 RPM ATA drive.  I found a 5400 RPM 40 GB ATA HDD, rider that he is a slave, installed, but it is not editing as C:.  This

  • Hardware error MIG. Or not?

    I have a PXI-5406, who was moved to a PXI-1033. Installed and worked fine. But once the box of the PXI-1033 was off by misstake while the PC still worked and when the PXI-1033 has been restarted, the PXI-5406 was not available in the FGEN Panel and g

  • Installation of Linux on a XPS 8500

    Dear Dell, I just replaced my old Dell Dimension with a new 8500 XPS at great expense. On my old size, I was able to load Linux on a completely separate drive. When I tried to boot into Linux, I was able to change the boot priority and start Linux. H

  • Windows 7 border, active window keeps flashing as if he's trying to tell me something. How can I disable it?

    It is extremely annoying. Does anyone know of a setting I can change to turn it off?