MacBook does not connect to Philips TV with adapter USB - C

Similar Questions

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• Centro does not connect to the synchronization with Windows/Palm HotSync

  My Centro ceased to sync with my Windows XP computer.  It just does not connect.  Did the soft reset, restart windows, etc.  No problem in Device Manager.

  The value of sync with outlook on the exchange server data.

  Same Centro and sync cable fine on the Linux machine using gnome-pilot and lines of development to access the same data exchange.

  Assuming that you can navigate through your windows machine.

  1. open Device Manager
  2. when your device is connected, you will see palm os handheld
  3. click straight and say to uninstall the driver
  4 disconnect your device and soft reset it
  5. reconnect the appliance and leave it to reinstall the driver

  This will force reinstall the driver and also tell us if there are errors with the driver.

  Message relates to: Centro (Sprint)

• Satellite L350 does not connect to the internet, network adapter yellow exclamation

  Trying to help my Nan with his laptop...
  Model is Satellite L350-170

  Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

  She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

  All the drivers can be downloaded from the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
  Then, you will get the list of drivers.

  If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

  You asked how to remove the network card?
  Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
  Click the single LED adapter, and then press or click on uninstall button driver

• HP Deskjet 3545: hp deskjet 3545 my desktop pc does not connect to the printer via the usb port

  Hello

  I installed all the drivers and the software correctly and the printer can communicate with my desktop pc for problem analysis, but when I open an editor like notepad, word, write something in them or when I open a photo and when I try to print, it cannot communicate with the printer. I used same HP print and Scan Doctor in order to study the problem by clicking on the button "Correct the impression", in the program, he sees even my connected printer (usb) or same (LAN), but printing HP and Scan doctor after reviewing all the steps and ticks as ok, when he said "try to send the test page" and when he tries to send it to the printer It does not send and I choose "no print" to see which program will thus be, discover the program this time said "send the in-house test page", and I chose this option to send it internally and the printer works. The program says "there is a problem which can not find this application for assistance. try to uninstall and reinstall the drivers as an adviser"but I uninstalled and reinstalled the drivers and seems that there is no error, or any problem with the drivers, but seems that it cannot connect to the printer, even if I can use the scanner of my office and it connects to the printer without problem. What can be the problem? How can we solve this problem? any help would be appreciated. Thank you. Windows XP Professional Edition, 32-bit SP3 is installed on my desktop.

  Sincerely

  Hello metehangunaydin,

  Please try the procedure below so that you can at least be able to print.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

• View-PCoIP does not connect on the desktop with ViewPlanner, but does not connect manually

  I saw this mentioned in a few subjects, but I've not seen a resolution.

  I configured a remote view-PCoIP see Planner run profile. The customer and and food Office of VMs on. The Office is a newspaper and connect the client starts the view Client PCoIP. It connects on the view connection server, but not on the desktop. The error message is 'office 'Unknown' is not in the list of desktop titled. (see the folder of the image as an attachment).

  I press the OK button on the error message, start the Client view manually, by using the same credentials see Planner in AD, and I am able to connect to connect to the server, then the virtual desktop computer. The job see Planner runs even at this place (if I don't stop to see Planner first).

  Two days ago, that I was able to run a desktop computer without problem running 10 profile. Since then, I've added several hundred offices at the pool, no other configuration change I can think. The pool is an automatic with floating assignments, office computers are supplied with View Composer. The 'Test' AD security group has the right (see image file).

  I don't understand why see Planner cannot connect to a desktop computer, so that I can do it manually.

  I see the same behavior with a single or multiple, virtual machine run profile.

  Here is an extract from the journal of the unit (all IP addresses are on an area of temporary laboratory, so I really don't like if they are exposed).

  Thanks and greetings

  Wednesday, March 26, 2014 23:17:29 DEBUG add users ['Test_1'] for security AD Group: Test
  Wednesday, March 26, 2014 23:17:29 DEBUG all users added to AD security group: Test
  Wednesday, March 26, 2014 23:17:31 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop: 0, Clients: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
  Wednesday, March 26, 2014 23:18:19 registration of new customer INFORMATION: 10.128.33.73
  Wednesday, March 26, 2014 23:18:19 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 0]
  Wednesday, March 26, 2014 23:18:20 new INFORMATION server registration: 10.128.33.132
  Wednesday, March 26, 2014 23:18:20 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 1]
  Wednesday, March 26, 2014 23:18:20 INFO get the IP address Office VM-1 of VC
  Wednesday, March 26, 2014 23:18:21 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop computers: 1, customers: 1] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
  Wednesday, March 26, 2014 23:18:30 INFO get the IP address VM VC client1
  Wednesday, March 26, 2014 23:18:30 INFO got the client1 virtual machine IP address: 10.128.33.73
  Wednesday, March 26, 2014 23:18:30 INFO get the IP address Office VM-1 of VC
  Wednesday, March 26, 2014 23:18:30 INFO obtained IP address for the virtual office-1 computer: 10.128.33.132
  Wednesday, March 26, 2014 23:18:30 DEBUG IP: 10.128.33.73-> name: client1
  Wednesday, March 26, 2014 23:18:30 DEBUG IP: 10.128.33.132-> name: office-1 computer
  Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = "10.128.33.132."
  Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State = 'Unpaired', name = 'computer office-1 "where IPADDR = '10.128.33.132'".
  Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '1' hostinfo, State is 'Unpaired', name = 'client1' where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:18:30 INFO registration remaining VMs
  Wednesday, March 26, 2014 23:18:30 reached the threshold of the INFO for the number of machines... The plan of starting reference...
  Wednesday, March 26, 2014 23:18:30 INFO waiting for virtual machines to settle and sleep during the time scale
  Wednesday, March 26, 2014 23:18:40 DEBUG of waiting for prefixes map to be extracted from Server view...
  Wednesday, March 26, 2014 23:18:41 INFO function call right with arguments: (pools: [], domain name: domaine.net, groupnames: ['Test'])
  Wednesday, March 26, 2014 23:18:41 groups of security of the object DEBUG AD ['Test'] to the office pool
  Wednesday, March 26, 2014 23:19:10 INFO assigning client-server for 1 pair
  Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "10.128.33.132."
  Wednesday, March 26, 2014 23:19:10 INFO query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('PCoIP-1VM', '10.128.33.73', '10.128.33.132', 'View-PCoIP', 'Test_1', "passw0rd", "waiting", '2014-03-26 23:19:10 ', 2)
  Wednesday, March 26, 2014 23:19:10 request information: SELECT * from testinfo where testname = 'PCoIP-1VM' and test_state = 'pending' and ClientIP_FK = '10.128.33.73' and ServerIP_FK = '10.128.33.132. '
  Wednesday, March 26, 2014 23:19:10 INFO -.
  Wednesday, March 26, 2014 23:19:10 INFO launch the execution plan for the run profile
  Wednesday, March 26, 2014 23:19:10 INFO -.
  Wednesday, March 26, 2014 23:19:10 DEBUG begins to gather statistics periodically VC...
  Wednesday, March 26, 2014 23:19:11 INFO from the workload for all assigned pairs...
  Wednesday, March 26, 2014 23:19:11 INFO remote command running on 10.128.33.132 machine: Logoff
  Wednesday, March 26, 2014 23:19:11 command run on the remote computer INFO: Logoff
  Wednesday, March 26, 2014 23:19:11 INFO wait until all desktop computers have disconnected
  Wednesday, March 26, 2014 23:19:21 INFO continues the race after waiting
  Wednesday, March 26, 2014 23:19:21 INFO looking for name of the cluster for computer office-1
  Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.128.33.73."
  Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.128.33.132."
  Wednesday, March 26, 2014 23:19:21 request information: UPDATE SET = '1VM-PCoIP' test_name testinfo, Protocol is 'View-PCoIP', name of user = 'Test_1', password = 'Q1w2e3r4!', test_state = 'Running', start_time = "2014-03-26 23:19:11" where test_id = 2837
  Wednesday, March 26, 2014 23:19:21 INFO running commands remotely with args: customer: 10.128.33.73, server: 10.128.216.88, Protocol: view-PCoIP, test_name: PCoIP-1VM, vmuser: Test_1, vmpasswd: Q1w2e3r4!, workprofile: {'IEbpm': 1 L, 'ARbpm': 1 L, "Thinktime": 2 L, "name": "StandardBenchmarkProfile_1i", "hosttime": 1, "random": 1, "iterations": 1 L, 'OMP': 60 L, 'video': 2 L, 'applist': ' WORD, ACROBAT, IE_APACHEDOC, EXCEL_SORT, 7ZIP} {, PPT, FIREFOX, OUTLOOK, IE_WEBALBUM, VIDEO '}, poolname: unknown, domain name: TMIOCONTROL
  Wednesday, March 26, 2014 23:19:21 INFO by adding the callback function for the remote root object to ipaddr: 10.128.33.73
  Wednesday, March 26, 2014 23:19:21 INFO added reminder for the command startWorkload on the client 10.128.33.73
  Wednesday, March 26, 2014 23:21:02 INFO connection started from the client: 10.128.33.73

  I think the name conventions 'computer of office-{n}' and Office-{n}"may be causing the problem. Can you try just to office-{n} and go to View server, open a command prompt and then run "python c:\listener.pyc" and after the release?

• Officejet 5610 - does not connect to the airport with USB

  You want to enable the printer to be used by all devices on my network. Works fine when USB connected directly to my Mac running OS 10.6.8. When USB connected to the AirPort Extreme wireless router, however, printer is visible on Mac and on my network, but is "offline." Cannot get printer to recognize that it is connected. Downloaded the latest version of the driver. Reset all devices. No luck. Any thoughts?

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• U2713HM, does not connect to Microsoft Wireless Display Adapter?

  I can't find instructions anywhere to connect this monitor to the graphics card.

  I hooked it up to my USB & HDMI on the bottom of the screen.

  I changed to import HDMI monitor.

  Said the Surface Pro 3 to connect

  He scanned for wireless screens and found nothing

  Pushed the reset button on Microsoft Wireless Display Adapter for 10 seconds

  I don't think that there is power to my USB ports.  Is there something I need to turn on the monitor to make this thing work?

  OK, according to ManuelU2713HM, upstream of U2713HM USB cable must be connected to a USB port on a computer.

  

  So if you have a laptop, connect the cable upstream U2713HM USB. Then test the Microsoft Wireless Adapter Display without the extension. Just use the U2713HM HDMI and USB.

• Bluetooth does not connect on iOS 10 and sierra OS

  I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

  I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

  I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

  It seems that the "it just works era" is over for apple.

  If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

• Broadcom netlink gigabit card does not connect to 1 Gbit/s, auto negotiate connects to 10 Mbps

  Hello

  I am very satisfied with my purchase Alienware Aurora ALX and happy to be part of this community.  However, I have this problem:

  Does not connect to 1 Gbps Ethernet adapter; Here's what I've tried so far:

  (1) confirmed that my router is able to support Gigabit Ethernet.  I have two other devices connected to the same speed (an old PC and NAS).

  (2) when I set the speed and duplex of the adapter auto negotiate, it will connect to 10 Mbps

  (3) I noticed that there is no setting for 1000 Mbps in speed and duplex options.

  (4) I tried 100 full duplex MB, it will connect, but my Internet connection slows down less than 1 Mbps (I'm on a 15Mbps connection and test the other PC it could reach around 14Mbps).

  (5) I then tried 100 MB half duplex, it will also link and my overall network performance is good.

  (6) I have confirmed that I have the current driver from Dell. I've had the computer for 3 days (using windows 7 by the way).

  (7) I tried all ports on my router and confirmed that the side of the router has also been on auto negotiate and not trying to force a specific speed.

  I hope someone has a solution or suggestion for this problem.

  Kind regards

  Jason

  * SOLUTION * thanks in part to the previous article.

  Here is the Giga speed solution that worked for my new Dell Studio 1458.  I've read a lot about speeds slow xfer using the Broadcom NetLink LAN connection.

  There were two things I did not initially, but were in fact true.

  (1) you must use a CAT 6 line on ALL your machines capable of gigabit.  I though that a good line of Cat5e support giga speeds.  This isn't.

  Card Dell NetLink is apparently, some initial negotiations with your router (a bit ' as a fax machine), then after seeing all of your connections.

  It will drop the xfer rate down to the lowest common component (i.e. the Cat5e cable).  And;

  (2) map of NetLink won't give you giga speeds in automatic selection (advanced ethernet properties, speed & duplex).  The speed and the duplex window will never

  view 1000 MB!  You can check if your is10/100/1000 connection by double clicking on the icon of your connection to the Local network.

  I checked the speed of my connection giga via a test utility and transferring a 200meg file.  The results indicate an increase in the speed of 12 MB/s to 26 MB/s.

  These figures do not show a factor of ten speeds increase, we'd all have (so much), but they are in line with transfer rates of others.

  I hope this helps!

• MacBook Pro 13 inch: Mac Pro does not connect to 5510 e printer

  I have problems connecting with one of my printers.

  My iMac will connect with my printer (an HP Photosmart 5510e and Photosmart 7280) wireless without any problem.  My 13 inch (2009) MacBook Pro connects to the 7280 wireless but does not connect to the HP Photosmart 5510e device.

  I recently had to restart my MacBook and reconnected it to a printer without any problems.  I can't find the driver for a printer so I don't know if the 5510's could not reload when I did the reboot.

  Any suggestions as to what I should have fact/do to recover from the situation?

  @Hahti

  You have installed the driver yet?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905

  REO

• HP Officejet 6700 Premium suddenly does not connect to my Macbook Pro more

  Hey everybody,

  I got my HP Officejet for over a year and it has always worked perfectly. It has a stable wifi connection. Yesterday, all of a sudden the printer did not respond, so I asked my brother, who is the type of an It'er and removed the printer from the "Print & Scan" system preferences. Now, however, it will not be added more. As I said, it doesn't have a stable wifi connection, and I can see the presence of the printer when I click on the plus to add a printer, but then, if I want to add it, it says "cannot communicate with the printer at this time." I rebooted the computer laptop and printer and even left stop for the night, but it does not work. Nobody knows anything else to try?

  Thank you very much in advance

  Hi Elizaanne,

  I understand that you are having problems with HP Officejet 6700 Premium does not connect to your Macbook Pro.

  The router must sometimes be recycled.  I unplug the router, turn off the printer, shut down the computer.

  Turn on router wait 5 min and turn on the printer and the computer.

  Check the printer if the Wifi is STRONG.

  Open Preferences system, Print and or print and scan pane. If you see the printer listed
  Click Printer button remove. It will ask for confirmation to delete printer.
  Click on add it or + button, select the MFP Hello not Fax. Adding that should update the drivers.

  If the Wifi of the printer is not fixed, you will need to reconfigure.

  1. Press the power button to turn on the printer.

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...